[U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a and ls2080a EP mode

[Xiaowei Bao]

> -----Original Message-----
> From: Priyanka Jain <priyanka.jain at nxp.com>
> Sent: 2019年12月23日 18:43
> To: Xiaowei Bao <xiaowei.bao at nxp.com>; M.h. Lian
> <minghuan.lian at nxp.com>; Z.q. Hou <zhiqiang.hou at nxp.com>; Mingkai Hu
> <mingkai.hu at nxp.com>; Jagdish Gediya <jagdish.gediya at nxp.com>; Pankaj
> Bansal <pankaj.bansal at nxp.com>; u-boot at lists.denx.de
> Cc: Xiaowei Bao <xiaowei.bao at nxp.com>
> Subject: RE: [U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a
> and ls2080a EP mode
> 
> >-----Original Message-----
> >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Xiaowei Bao
> >Sent: Friday, November 22, 2019 1:04 PM
> >To: M.h. Lian <minghuan.lian at nxp.com>; Z.q. Hou
> <zhiqiang.hou at nxp.com>;
> >Mingkai Hu <mingkai.hu at nxp.com>; Jagdish Gediya
> ><jagdish.gediya at nxp.com>; Pankaj Bansal <pankaj.bansal at nxp.com>;
> >u-boot at lists.denx.de
> >Cc: Xiaowei Bao <xiaowei.bao at nxp.com>
> >Subject: [U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a
> >and ls2080a EP mode
> >
> >Due to the ls2085a and ls2080a use difference way to set the BAR size,
> >so add the BAR size init code here.
> >
> >Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com> depends on:
> >http://patchwork.ozlabs.org/project/uboot/list/?series=108172&state=*
> <snip>
> Depends-on patches are marked as "Changes Requested".
> Please help to provide latest version of those patches.

I have not start on this work, if spilt EP and RC driver in u-boot, maybe spend 
more time, I plan to do this in Feb, thanks.

> 
> Priyanka