[PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type

Lukasz Majewski lukma at denx.de
Sun Dec 8 16:05:24 CET 2019


On Wed,  4 Dec 2019 18:44:28 +0100
Giulio Benetti <giulio.benetti at benettiengineering.com> wrote:

> Add support for PLLV3 AV type.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
> ---
>  drivers/clk/imx/clk-pllv3.c | 76
> +++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index d5087a104e..fc16416d5f 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -6,6 +6,7 @@
>  
>  #include <common.h>
>  #include <asm/io.h>
> +#include <div64.h>
>  #include <malloc.h>
>  #include <clk-uclass.h>
>  #include <dm/device.h>
> @@ -16,6 +17,10 @@
>  #define UBOOT_DM_CLK_IMX_PLLV3_GENERIC	"imx_clk_pllv3_generic"
>  #define UBOOT_DM_CLK_IMX_PLLV3_SYS	"imx_clk_pllv3_sys"
>  #define UBOOT_DM_CLK_IMX_PLLV3_USB	"imx_clk_pllv3_usb"
> +#define UBOOT_DM_CLK_IMX_PLLV3_AV	"imx_clk_pllv3_av"
> +
> +#define PLL_NUM_OFFSET		0x10
> +#define PLL_DENOM_OFFSET	0x20
>  
>  #define BM_PLL_POWER		(0x1 << 12)
>  #define BM_PLL_LOCK		(0x1 << 31)
> @@ -143,6 +148,65 @@ static const struct clk_ops clk_pllv3_sys_ops = {
>  	.set_rate	= clk_pllv3_sys_set_rate,
>  };
>  
> +static ulong clk_pllv3_av_get_rate(struct clk *clk)
> +{
> +	struct clk_pllv3 *pll = to_clk_pllv3(clk);
> +	unsigned long parent_rate = clk_get_parent_rate(clk);
> +	u32 mfn = readl(pll->base + PLL_NUM_OFFSET);
> +	u32 mfd = readl(pll->base + PLL_DENOM_OFFSET);
> +	u32 div = readl(pll->base) & pll->div_mask;
> +	u64 temp64 = (u64)parent_rate;
> +
> +	temp64 *= mfn;
> +	do_div(temp64, mfd);
> +
> +	return parent_rate * div + (unsigned long)temp64;
> +}
> +
> +static ulong clk_pllv3_av_set_rate(struct clk *clk, ulong rate)
> +{
> +	struct clk_pllv3 *pll = to_clk_pllv3(clk);
> +	unsigned long parent_rate = clk_get_parent_rate(clk);
> +	unsigned long min_rate = parent_rate * 27;
> +	unsigned long max_rate = parent_rate * 54;
> +	u32 val, div;
> +	u32 mfn, mfd = 1000000;
> +	u32 max_mfd = 0x3FFFFFFF;
> +	u64 temp64;
> +
> +	if (rate < min_rate || rate > max_rate)
> +		return -EINVAL;
> +
> +	if (parent_rate <= max_mfd)
> +		mfd = parent_rate;
> +
> +	div = rate / parent_rate;
> +	temp64 = (u64)(rate - div * parent_rate);
> +	temp64 *= mfd;
> +	do_div(temp64, parent_rate);
> +	mfn = temp64;
> +
> +	val = readl(pll->base);
> +	val &= ~pll->div_mask;
> +	val |= div;
> +	writel(val, pll->base);
> +	writel(mfn, pll->base + PLL_NUM_OFFSET);
> +	writel(mfd, pll->base + PLL_DENOM_OFFSET);
> +
> +	/* Wait for PLL to lock */
> +	while (!(readl(pll->base) & BM_PLL_LOCK))
> +		;
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops clk_pllv3_av_ops = {
> +	.enable		= clk_pllv3_generic_enable,
> +	.disable	= clk_pllv3_generic_disable,
> +	.get_rate	= clk_pllv3_av_get_rate,
> +	.set_rate	= clk_pllv3_av_set_rate,
> +};
> +
>  struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
>  			  const char *parent_name, void __iomem
> *base, u32 div_mask)
> @@ -174,6 +238,11 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type
> type, const char *name, pll->div_shift = 1;
>  		pll->powerup_set = true;
>  		break;
> +	case IMX_PLLV3_AV:
> +		drv_name = UBOOT_DM_CLK_IMX_PLLV3_AV;
> +		pll->div_shift = 0;
> +		pll->powerup_set = false;
> +		break;
>  	default:
>  		kfree(pll);
>  		return ERR_PTR(-ENOTSUPP);
> @@ -212,3 +281,10 @@ U_BOOT_DRIVER(clk_pllv3_usb) = {
>  	.ops	= &clk_pllv3_generic_ops,
>  	.flags = DM_FLAG_PRE_RELOC,
>  };
> +
> +U_BOOT_DRIVER(clk_pllv3_av) = {
> +	.name	= UBOOT_DM_CLK_IMX_PLLV3_AV,
> +	.id	= UCLASS_CLK,
> +	.ops	= &clk_pllv3_av_ops,
> +	.flags = DM_FLAG_PRE_RELOC,
> +};

I don't mind about adding this new functionality, but I'm a bit
concerned about increase if the size of SPL binary (as it sets the
DM_FLAG_PRE_RELOC).

Do you have any data about increase of the final binary size?

The buildman script has options to check the difference of the final
binary (i.e. SPL) size (as provided by Tom Rini):

./tools/buildman/$ export SOURCE_DATE_EPOCH=`date +%s`
$ ./tools/buildman/buildman -o  /tmp/test --step 0 -b origin/master.. --force-build -CveE
$ ./tools/buildman/buildman -o  /tmp/test --step 0 -b origin/master.. -Ssdel

to get size changes between point A and point Z in a branch, and omit
--step 0 when I need to see which patch in between them caused the size
change.


If the SPL growth is too big - maybe we shall introduce some Kconfig
options to add a separate support for those PLLv3 options ?

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191208/2945d8dc/attachment.sig>


More information about the U-Boot mailing list