[PATCH 3/4] riscv: add option to wait for ack from secondary harts in smp functions
Rick Chen
rickchen36 at gmail.com
Fri Dec 6 09:36:04 CET 2019
Hi Lukas,
> From: Lukas Auer [mailto:lukas.auer at aisec.fraunhofer.de]
> Sent: Wednesday, December 04, 2019 5:40 AM
> To: u-boot at lists.denx.de
> Cc: Rick Jian-Zhi Chen(陳建志); Anup Patel; Bin Meng; Lukas Auer; Anup Patel; Atish Patra; Marcus Comstedt
> Subject: [PATCH 3/4] riscv: add option to wait for ack from secondary harts in smp functions
>
> Add a wait option to smp_call_function() to wait for the secondary harts to acknowledge the call-function request. The request is considered to be acknowledged once each secondary hart has cleared the corresponding IPI.
>
> As part of the call-function request, the secondary harts invalidate the instruction cache after clearing the IPI. This adds a delay between acknowledgment (clear IPI) and fulfillment (call function) of the request. We want to use the acknowledgment to be able to judge when the request has been completed. Remove the delay by clearing the IPI after cache invalidation and just before calling the function from the request.
>
> Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
> ---
>
Reviewed-by: Rick Chen <rick at andestech.com>
Tested-by: Rick Chen <rick at andestech.com>
> arch/riscv/cpu/start.S | 2 ++
> arch/riscv/include/asm/smp.h | 3 ++-
> arch/riscv/lib/bootm.c | 2 +-
> arch/riscv/lib/smp.c | 31 ++++++++++++++++++++++---------
> arch/riscv/lib/spl.c | 2 +-
> common/spl/spl_opensbi.c | 2 +-
> 6 files changed, 29 insertions(+), 13 deletions(-)
>
> diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 0a2ce6d691..60631638dd 100644
> --- a/arch/riscv/cpu/start.S
> +++ b/arch/riscv/cpu/start.S
> @@ -197,6 +197,7 @@ spl_secondary_hart_stack_gd_setup:
> la a0, secondary_hart_relocate
> mv a1, s0
> mv a2, s0
> + mv a3, zero
> jal smp_call_function
>
> /* hang if relocation of secondary harts has failed */ @@ -337,6 +338,7 @@ relocate_secondary_harts:
>
> mv a1, s2
> mv a2, s3
> + mv a3, zero
> jal smp_call_function
>
> /* hang if relocation of secondary harts has failed */ diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index bc863fdbaf..74de92ed13 100644
> --- a/arch/riscv/include/asm/smp.h
> +++ b/arch/riscv/include/asm/smp.h
> @@ -46,8 +46,9 @@ void handle_ipi(ulong hart);
> * @addr: Address of function
> * @arg0: First argument of function
> * @arg1: Second argument of function
> + * @wait: Wait for harts to acknowledge request
> * @return 0 if OK, -ve on error
> */
> -int smp_call_function(ulong addr, ulong arg0, ulong arg1);
> +int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait);
>
> #endif
> diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index efbd3e23e7..e96137a50c 100644
> --- a/arch/riscv/lib/bootm.c
> +++ b/arch/riscv/lib/bootm.c
> @@ -99,7 +99,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
> if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { #ifdef CONFIG_SMP
> ret = smp_call_function(images->ep,
> - (ulong)images->ft_addr, 0);
> + (ulong)images->ft_addr, 0, 0);
> if (ret)
> hang();
> #endif
> diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c index 6ff0de4b74..d575e904c2 100644
> --- a/arch/riscv/lib/smp.c
> +++ b/arch/riscv/lib/smp.c
> @@ -43,11 +43,11 @@ extern int riscv_clear_ipi(int hart);
> */
> extern int riscv_get_ipi(int hart, int *pending);
>
> -static int send_ipi_many(struct ipi_data *ipi)
> +static int send_ipi_many(struct ipi_data *ipi, int wait)
> {
> ofnode node, cpus;
> u32 reg;
> - int ret;
> + int ret, pending;
>
> cpus = ofnode_path("/cpus");
> if (!ofnode_valid(cpus)) {
> @@ -90,6 +90,15 @@ static int send_ipi_many(struct ipi_data *ipi)
> pr_err("Cannot send IPI to hart %d\n", reg);
> return ret;
> }
> +
> + if (wait) {
> + pending = 1;
> + while (pending) {
> + ret = riscv_get_ipi(reg, &pending);
> + if (ret)
> + return ret;
> + }
> + }
> }
>
> return 0;
> @@ -103,21 +112,25 @@ void handle_ipi(ulong hart)
> if (hart >= CONFIG_NR_CPUS)
> return;
>
> + __smp_mb();
> +
> + smp_function = (void (*)(ulong, ulong, ulong))gd->arch.ipi[hart].addr;
> + invalidate_icache_all();
> +
> + /*
> + * Clear the IPI to acknowledge the request before jumping to the
> + * requested function.
> + */
> ret = riscv_clear_ipi(hart);
> if (ret) {
> pr_err("Cannot clear IPI of hart %ld\n", hart);
> return;
> }
>
> - __smp_mb();
> -
> - smp_function = (void (*)(ulong, ulong, ulong))gd->arch.ipi[hart].addr;
> - invalidate_icache_all();
> -
> smp_function(hart, gd->arch.ipi[hart].arg0, gd->arch.ipi[hart].arg1); }
>
> -int smp_call_function(ulong addr, ulong arg0, ulong arg1)
> +int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait)
> {
> int ret = 0;
> struct ipi_data ipi;
> @@ -126,7 +139,7 @@ int smp_call_function(ulong addr, ulong arg0, ulong arg1)
> ipi.arg0 = arg0;
> ipi.arg1 = arg1;
>
> - ret = send_ipi_many(&ipi);
> + ret = send_ipi_many(&ipi, wait);
>
> return ret;
> }
> diff --git a/arch/riscv/lib/spl.c b/arch/riscv/lib/spl.c index bea8695987..fd3c2efc5b 100644
> --- a/arch/riscv/lib/spl.c
> +++ b/arch/riscv/lib/spl.c
> @@ -40,7 +40,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
>
> debug("image entry point: 0x%lX\n", spl_image->entry_point); #ifdef CONFIG_SMP
> - ret = smp_call_function(spl_image->entry_point, (ulong)fdt_blob, 0);
> + ret = smp_call_function(spl_image->entry_point, (ulong)fdt_blob, 0,
> +0);
> if (ret)
> hang();
> #endif
> diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c index 79ee7edcf9..91a411a3db 100644
> --- a/common/spl/spl_opensbi.c
> +++ b/common/spl/spl_opensbi.c
> @@ -77,7 +77,7 @@ void spl_invoke_opensbi(struct spl_image_info *spl_image) #ifdef CONFIG_SMP
> ret = smp_call_function((ulong)spl_image->entry_point,
> (ulong)spl_image->fdt_addr,
> - (ulong)&opensbi_info);
> + (ulong)&opensbi_info, 0);
> if (ret)
> hang();
> #endif
> --
> 2.21.0
>
More information about the U-Boot
mailing list