[RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion

[sbabic at denx.de]

> From: Igor Opaniuk <igor.opaniuk at toradex.com>
> Not all CONFIG_FSL_ESDHC defines were properly replaced with
> CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on
> Colibri iMX6 SoMs.
> U-boot is stuck after this message:
> Commercial temperature grade DDR3 timings, 64bit bus width.
> Trying to boot from MMC1
> Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms")
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================