[PATCH v4 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
sughosh.ganu at linaro.org
Sat Dec 28 19:31:05 CET 2019
Add support for the EFI_RNG_PROTOCOL routines for the qemu arm64
platform. EFI_RNG_PROTOCOL is an uefi boottime service which is
invoked by the efi stub in the kernel for getting random seed for
kaslr.
The routines are platform specific, and use the virtio-rng device on
the platform to get random data.
The feature can be enabled through the following config
CONFIG_EFI_RNG_PROTOCOL
Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
---
Changes since V3:
* Handle review comments from Heinrich Schuchardt related to calling
EFI_EXIT at the end of the efi_rng_protocol routines using a goto
label.
* Add a weak function platform_get_rng_device based on review comment
from Heinrich Schuchardt.
board/emulation/qemu-arm/qemu-arm.c | 42 ++++++++++++++
include/efi_rng.h | 32 +++++++++++
lib/efi_loader/Kconfig | 8 +++
lib/efi_loader/Makefile | 1 +
lib/efi_loader/efi_rng.c | 111 ++++++++++++++++++++++++++++++++++++
5 files changed, 194 insertions(+)
create mode 100644 include/efi_rng.h
create mode 100644 lib/efi_loader/efi_rng.c
diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
index e1f4709..4e18733 100644
--- a/board/emulation/qemu-arm/qemu-arm.c
+++ b/board/emulation/qemu-arm/qemu-arm.c
@@ -91,3 +91,45 @@ void *board_fdt_blob_setup(void)
/* QEMU loads a generated DTB for us at the start of RAM. */
return (void *)CONFIG_SYS_SDRAM_BASE;
}
+
+#if defined(CONFIG_EFI_RNG_PROTOCOL)
+#include <efi_loader.h>
+#include <efi_rng.h>
+
+#include <dm/device-internal.h>
+
+efi_status_t platform_get_rng_device(struct udevice **dev)
+{
+ int ret;
+ efi_status_t status = EFI_DEVICE_ERROR;
+ struct udevice *bus, *devp;
+
+ for (uclass_first_device(UCLASS_VIRTIO, &bus); bus;
+ uclass_next_device(&bus)) {
+ for (device_find_first_child(bus, &devp); devp;
+ device_find_next_child(&devp)) {
+ if (device_get_uclass_id(devp) == UCLASS_RNG) {
+ *dev = devp;
+ status = EFI_SUCCESS;
+ break;
+ }
+ }
+ }
+
+ if (status != EFI_SUCCESS) {
+ debug("No rng device found\n");
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (*dev) {
+ ret = device_probe(*dev);
+ if (ret)
+ return EFI_DEVICE_ERROR;
+ } else {
+ debug("Couldn't get child device\n");
+ return EFI_DEVICE_ERROR;
+ }
+
+ return EFI_SUCCESS;
+}
+#endif /* CONFIG_EFI_RNG_PROTOCOL */
diff --git a/include/efi_rng.h b/include/efi_rng.h
new file mode 100644
index 0000000..a46e66d
--- /dev/null
+++ b/include/efi_rng.h
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#if !defined _EFI_RNG_H_
+#define _EFI_RNG_H_
+
+#include <efi.h>
+#include <efi_api.h>
+
+/* EFI random number generation protocol related GUID definitions */
+#define EFI_RNG_PROTOCOL_GUID \
+ EFI_GUID(0x3152bca5, 0xeade, 0x433d, 0x86, 0x2e, \
+ 0xc0, 0x1c, 0xdc, 0x29, 0x1f, 0x44)
+
+#define EFI_RNG_ALGORITHM_RAW \
+ EFI_GUID(0xe43176d7, 0xb6e8, 0x4827, 0xb7, 0x84, \
+ 0x7f, 0xfd, 0xc4, 0xb6, 0x85, 0x61)
+
+struct efi_rng_protocol {
+ efi_status_t (EFIAPI *get_info)(struct efi_rng_protocol *protocol,
+ efi_uintn_t *rng_algorithm_list_size,
+ efi_guid_t *rng_algorithm_list);
+ efi_status_t (EFIAPI *get_rng)(struct efi_rng_protocol *protocol,
+ efi_guid_t *rng_algorithm,
+ efi_uintn_t rng_value_length, uint8_t *rng_value);
+};
+
+efi_status_t platform_get_rng_device(struct udevice **dev);
+
+#endif /* _EFI_RNG_H_ */
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 21ef440..24dde6f 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -120,4 +120,12 @@ config EFI_GRUB_ARM32_WORKAROUND
GRUB prior to version 2.04 requires U-Boot to disable caches. This
workaround currently is also needed on systems with caches that
cannot be managed via CP15.
+
+config EFI_RNG_PROTOCOL
+ bool "EFI_RNG_PROTOCOL support"
+ depends on DM_RNG
+ help
+ "Support for EFI_RNG_PROTOCOL implementation. Uses the rng
+ device on the platform"
+
endif
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index 7db4060..04dc864 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -42,3 +42,4 @@ obj-$(CONFIG_PARTITIONS) += efi_disk.o
obj-$(CONFIG_NET) += efi_net.o
obj-$(CONFIG_GENERATE_ACPI_TABLE) += efi_acpi.o
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += efi_smbios.o
+obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_rng.o
diff --git a/lib/efi_loader/efi_rng.c b/lib/efi_loader/efi_rng.c
new file mode 100644
index 0000000..2e7a148
--- /dev/null
+++ b/lib/efi_loader/efi_rng.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <efi_loader.h>
+#include <efi_rng.h>
+#include <rng.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak efi_status_t platform_get_rng_device(struct udevice **dev)
+{
+ int ret;
+ struct udevice *devp;
+
+ ret = uclass_get_device(UCLASS_RNG, 0, &devp);
+ if (ret) {
+ debug("Unable to get rng device\n");
+ return EFI_DEVICE_ERROR;
+ }
+
+ *dev = devp;
+
+ return EFI_SUCCESS;
+}
+
+static efi_status_t EFIAPI rng_getinfo(struct efi_rng_protocol *this,
+ efi_uintn_t *rng_algorithm_list_size,
+ efi_guid_t *rng_algorithm_list)
+{
+ efi_status_t ret = EFI_SUCCESS;
+ efi_guid_t rng_algo_guid = EFI_RNG_ALGORITHM_RAW;
+
+ EFI_ENTRY("%p, %p, %p", this, rng_algorithm_list_size,
+ rng_algorithm_list);
+
+ if (!this || !rng_algorithm_list_size) {
+ ret = EFI_INVALID_PARAMETER;
+ goto back;
+ }
+
+ if (!rng_algorithm_list ||
+ *rng_algorithm_list_size < sizeof(*rng_algorithm_list)) {
+ *rng_algorithm_list_size = sizeof(*rng_algorithm_list);
+ ret = EFI_BUFFER_TOO_SMALL;
+ goto back;
+ }
+
+ /*
+ * For now, use EFI_RNG_ALGORITHM_RAW as the default
+ * algorithm. If a new algorithm gets added in the
+ * future through a Kconfig, rng_algo_guid will be set
+ * based on that Kconfig option
+ */
+ *rng_algorithm_list_size = sizeof(*rng_algorithm_list);
+ guidcpy(rng_algorithm_list, &rng_algo_guid);
+
+back:
+ return EFI_EXIT(ret);
+}
+
+static efi_status_t EFIAPI getrng(struct efi_rng_protocol *this,
+ efi_guid_t *rng_algorithm,
+ efi_uintn_t rng_value_length,
+ uint8_t *rng_value)
+{
+ int ret;
+ efi_status_t status = EFI_SUCCESS;
+ struct udevice *dev;
+ const efi_guid_t rng_raw_guid = EFI_RNG_ALGORITHM_RAW;
+
+ EFI_ENTRY("%p, %p, %zu, %p", this, rng_algorithm, rng_value_length,
+ rng_value);
+
+ if (!this || !rng_value || !rng_value_length) {
+ status = EFI_INVALID_PARAMETER;
+ goto back;
+ }
+
+ if (rng_algorithm) {
+ EFI_PRINT("RNG algorithm %pUl\n", rng_algorithm);
+ if (guidcmp(rng_algorithm, &rng_raw_guid)) {
+ status = EFI_UNSUPPORTED;
+ goto back;
+ }
+ }
+
+ ret = platform_get_rng_device(&dev);
+ if (ret != EFI_SUCCESS) {
+ status = EFI_UNSUPPORTED;
+ goto back;
+ }
+
+ ret = dm_rng_read(dev, rng_value, rng_value_length);
+ if (ret < 0) {
+ EFI_PRINT("Rng device read failed\n");
+ status = EFI_DEVICE_ERROR;
+ goto back;
+ }
+
+back:
+ return EFI_EXIT(status);
+}
+
+const struct efi_rng_protocol efi_rng_protocol = {
+ .get_info = rng_getinfo,
+ .get_rng = getrng,
+};
--
2.7.4
More information about the U-Boot
mailing list