[U-Boot] [PATCH v5 101/101] x86: Add chromebook_coral
Bin Meng
bmeng.cn at gmail.com
Mon Dec 2 15:22:09 CET 2019
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass <sjg at chromium.org> wrote:
>
> Add support for coral which is a range of Apollo Lake-based Chromebook
> released in 2017. This also includes reef released in 2016, since it is
> based on the same SoC.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v5:
> - Add gpio-controller to GPIO nodes
> - Comment out GPIOs in the fsp_s node since we don't use them yet
> - Correct CPU ACPI IDs
> - Use a define for ACPI base address
>
> Changes in v4:
> - Add u-boot,skip-auto-config-until-reloc property to PCI
> - Drop duplicate commit 'Create a new sandbox_pci_read_bar() function'
> - New GPIO driver binding
> - Set up LPC pads early
> - Switch over to use pinctrl for pad init/config
> - Update documentation with more detailed memory map
> - Use hyphen for device-tree properties
> - apollolake -> Apollo Lake
>
> Changes in v3:
> - Ad FSP-S support
> - Add CONFIG_TPL_X86_ASSUME_CPUID to reduce code size
> - Add Chrome OS EC support
> - Add a proper SPI node and make the SPI flash node a child
> - Add bootstage support
> - Add more documentation
> - Add spi alias in device tree
> - Disable the bootcommand since it does nothing useful on coral
> - Don't enable SPI flash in TPL by default
> - Drop CONFIG_SPL_NET_SUPPORT
> - Drop patch '86: timer: Reduce timer code size in TPL on Intel CPUs'
> - Drop patch 'dm: core: Don't include ofnode functions with of-platdata'
> - Drop patch 'spi: sandbox: Add a test driver for sandbox SPI flash'
> - Drop patch 'spl: Allow SPL/TPL to use of-platdata without libfdt'
> - Drop patch 'x86: apollolake: Add definitions for the Intel Fast SPI interface'
> - Drop patch 'x86: timer: Set up the timer in timer_early_get_count()'
> - Enable video and USB3
> - Reduce amount of early-pad data in TPL
> - Tidy up the pad settings in the device tree
> - Use a zero-based tsc timer
>
> Changes in v2: None
>
> arch/x86/dts/Makefile | 1 +
> arch/x86/dts/chromebook_coral.dts | 831 ++++++++++++++++++++++
> board/google/Kconfig | 15 +
> board/google/chromebook_coral/Kconfig | 43 ++
> board/google/chromebook_coral/MAINTAINERS | 6 +
> board/google/chromebook_coral/Makefile | 5 +
> board/google/chromebook_coral/coral.c | 18 +
> configs/chromebook_coral_defconfig | 102 +++
> doc/board/google/chromebook_coral.rst | 241 +++++++
> include/configs/chromebook_coral.h | 32 +
> 10 files changed, 1294 insertions(+)
> create mode 100644 arch/x86/dts/chromebook_coral.dts
> create mode 100644 board/google/chromebook_coral/Kconfig
> create mode 100644 board/google/chromebook_coral/MAINTAINERS
> create mode 100644 board/google/chromebook_coral/Makefile
> create mode 100644 board/google/chromebook_coral/coral.c
> create mode 100644 configs/chromebook_coral_defconfig
> create mode 100644 doc/board/google/chromebook_coral.rst
> create mode 100644 include/configs/chromebook_coral.h
>
> diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
> index d4bdf62be6..be209aaaf8 100644
> --- a/arch/x86/dts/Makefile
> +++ b/arch/x86/dts/Makefile
> @@ -2,6 +2,7 @@
>
> dtb-y += bayleybay.dtb \
> cherryhill.dtb \
> + chromebook_coral.dtb \
> chromebook_link.dtb \
> chromebox_panther.dtb \
> chromebook_samus.dtb \
> diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
> new file mode 100644
> index 0000000000..583d5eb8bc
> --- /dev/null
> +++ b/arch/x86/dts/chromebook_coral.dts
> @@ -0,0 +1,831 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/x86-gpio.h>
> +
> +/include/ "skeleton.dtsi"
> +/include/ "keyboard.dtsi"
> +/include/ "reset.dtsi"
> +/include/ "rtc.dtsi"
> +/include/ "tsc_timer.dtsi"
> +
> +#ifdef CONFIG_CHROMEOS
> +#include "chromeos-x86.dtsi"
> +#include "flashmap-x86-ro.dtsi"
> +#include "flashmap-16mb-rw.dtsi"
> +#endif
> +
> +#include <asm/intel_pinctrl_defs.h>
> +#include <asm/arch-apollolake/cpu.h>
> +#include <asm/arch-apollolake/gpio.h>
> +#include <asm/arch-apollolake/iomap.h>
> +#include <asm/arch-apollolake/pm.h>
> +
> +/ {
> + model = "Google Coral";
> + compatible = "google,coral", "intel,apollolake";
> +
> + aliases {
> + cros-ec0 = &cros_ec;
> + fsp = &fsp_s;
> + spi0 = &spi;
> + };
> +
> + config {
> + silent_console = <0>;
> + };
> +
> + chosen {
> + stdout-path = &serial;
> + };
> +
> + cpus {
> + u-boot,dm-pre-reloc;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + u-boot,dm-pre-reloc;
> + device_type = "cpu";
> + compatible = "intel,apl-cpu";
> + reg = <0>;
> + intel,apic-id = <0>;
> + };
> +
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "intel,apl-cpu";
> + reg = <1>;
> + intel,apic-id = <2>;
> + };
> +
> + cpu at 2 {
> + device_type = "cpu";
> + compatible = "intel,apl-cpu";
> + reg = <2>;
> + intel,apic-id = <4>;
> + };
> +
> + cpu at 3 {
> + device_type = "cpu";
> + compatible = "intel,apl-cpu";
> + reg = <3>;
> + intel,apic-id = <6>;
> + };
> +
> + };
> +
> + keyboard {
> + intel,duplicate-por;
> + };
> +
> + pci {
> + compatible = "pci-x86";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + u-boot,dm-pre-reloc;
> + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
> + 0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000
> + 0x01000000 0x0 0x1000 0x1000 0 0xefff>;
> + u-boot,skip-auto-config-until-reloc;
> +
> + host_bridge: host-bridge at 0,0 {
> + u-boot,dm-pre-reloc;
> + reg = <0x00000000 0 0 0 0>;
> + compatible = "intel,apl-hostbridge";
> + pciex-region-size = <0x10000000>;
> + /*
> + * Parameters used by the FSP-S binary blob. This is
> + * really unfortunate since these parameters mostly
> + * relate to drivers but we need them in one place. We
> + * could put them in the driver nodes easily, but then
> + * would have to scan each node to find them. So just
> + * dump them here for now.
> + */
> + fsp_s: fsp-s {
> + };
> + };
> +
> + punit at 0,1 {
> + u-boot,dm-pre-reloc;
> + reg = <0x00000800 0 0 0 0>;
> + compatible = "intel,apl-punit";
> + };
> +
> + p2sb: p2sb at d,0 {
> + u-boot,dm-pre-reloc;
> + reg = <0x02006810 0 0 0 0>;
> + compatible = "intel,apl-p2sb";
> + early-regs = <IOMAP_P2SB_BAR 0x100000>;
> +
> + n {
> + compatible = "intel,apl-pinctrl";
> + u-boot,dm-pre-reloc;
> + intel,p2sb-port-id = <PID_GPIO_N>;
> + gpio_n: gpio-n {
> + compatible = "intel,apl-gpio";
> + u-boot,dm-pre-reloc;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + nw {
> + u-boot,dm-pre-reloc;
> + compatible = "intel,apl-pinctrl";
> + intel,p2sb-port-id = <PID_GPIO_NW>;
> + #gpio-cells = <2>;
> + gpio_nw: gpio-nw {
> + compatible = "intel,apl-gpio";
> + u-boot,dm-pre-reloc;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + w {
> + u-boot,dm-pre-reloc;
> + compatible = "intel,apl-pinctrl";
> + intel,p2sb-port-id = <PID_GPIO_W>;
> + #gpio-cells = <2>;
> + gpio_w: gpio-w {
> + compatible = "intel,apl-gpio";
> + u-boot,dm-pre-reloc;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + sw {
> + u-boot,dm-pre-reloc;
> + compatible = "intel,apl-pinctrl";
> + intel,p2sb-port-id = <PID_GPIO_SW>;
> + #gpio-cells = <2>;
> + gpio_sw: gpio-sw {
> + compatible = "intel,apl-gpio";
> + u-boot,dm-pre-reloc;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + itss {
> + u-boot,dm-pre-reloc;
> + compatible = "intel,apl-itss";
> + intel,p2sb-port-id = <PID_ITSS>;
> + intel,pmc-routes = <
> + PMC_GPE_SW_31_0 GPIO_GPE_SW_31_0
> + PMC_GPE_SW_63_32 GPIO_GPE_SW_63_32
> + PMC_GPE_NW_31_0 GPIO_GPE_NW_31_0
> + PMC_GPE_NW_63_32 GPIO_GPE_NW_63_32
> + PMC_GPE_NW_95_64 GPIO_GPE_NW_95_64
> + PMC_GPE_N_31_0 GPIO_GPE_N_31_0
> + PMC_GPE_N_63_32 GPIO_GPE_N_63_32
> + PMC_GPE_W_31_0 GPIO_GPE_W_31_0>;
> + };
> + };
> +
> + pmc at d,1 {
> + u-boot,dm-pre-reloc;
> + reg = <0x6900 0 0 0 0>;
> +
> + /*
> + * Values for BAR0, BAR2 and ACPI_BASE for when PCI
> + * auto-configure is not available
> + */
> + early-regs = <0xfe042000 0x2000
> + 0xfe044000 0x2000
> + IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
> + compatible = "intel,apl-pmc";
> + gpe0-dwx-mask = <0xf>;
> + gpe0-dwx-shift-base = <4>;
> +
> + /*
> + * GPE configuration
> + * Note that GPE events called out in ASL code rely on
> + * this route, i.e., if this route changes then the
> + * affected GPE * offset bits also need to be changed.
> + * This sets the PMC register GPE_CFG fields.
> + */
> + gpe0-dw = <PMC_GPE_N_31_0
> + PMC_GPE_N_63_32
> + PMC_GPE_SW_31_0>;
> + gpe0-sts = <0x20>;
> + gpe0-en = <0x30>;
> + };
> +
> + spi: fast-spi at d,2 {
> + u-boot,dm-pre-reloc;
> + reg = <0x02006a10 0 0 0 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "intel,fast-spi";
> + early-regs = <IOMAP_SPI_BASE 0x1000>;
> + intel,hardware-seq = <1>;
> +
> + fwstore_spi: spi-flash at 0 {
> + #size-cells = <1>;
> + #address-cells = <1>;
> + u-boot,dm-pre-reloc;
> + reg = <0>;
> + compatible = "winbond,w25q128fw",
> + "jedec,spi-nor";
> + rw-mrc-cache {
> + label = "rw-mrc-cache";
> + reg = <0x008e0000 0x00010000>;
> + u-boot,dm-pre-reloc;
> + };
> + rw-var-mrc-cache {
> + label = "rw-mrc-cache";
> + reg = <0x008f0000 0x0001000>;
> + u-boot,dm-pre-reloc;
> + };
> + };
> + };
> +
> + serial: serial at 18,2 {
> + reg = <0x0200c210 0 0 0 0>;
> + u-boot,dm-pre-reloc;
> + compatible = "intel,apl-ns16550";
> + early-regs = <0xde000000 0x20>;
> + reg-shift = <2>;
> + clock-frequency = <1843200>;
> + current-speed = <115200>;
> + };
> +
> + pch: pch at 1f,0 {
> + reg = <0x0000f800 0 0 0 0>;
> + compatible = "intel,apl-pch";
> + u-boot,dm-pre-reloc;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + lpc {
> + compatible = "intel,apl-lpc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + u-boot,dm-pre-reloc;
> + cros_ec: cros-ec {
> + u-boot,dm-pre-reloc;
> + compatible = "google,cros-ec-lpc";
> + reg = <0x204 1 0x200 1 0x880 0x80>;
> +
> + /*
> + * Describes the flash memory within
> + * the EC
> + */
> + #address-cells = <1>;
> + #size-cells = <1>;
> + flash at 8000000 {
> + reg = <0x08000000 0x20000>;
> + erase-value = <0xff>;
> + };
> + };
> + };
> + };
> + };
> +
> +};
> +
> +&host_bridge {
> + /*
> + * PL1 override 12000 mW: the energy calculation is wrong with the
> + * current VR solution. Experiments show that SoC TDP max (6W) can be
> + * reached when RAPL PL1 is set to 12W. Set RAPL PL2 to 15W.
> + */
> + tdp-pl-override-mw = <12000 15000>;
> +
> + early-pads = <
> + /* These two are for the debug UART */
> + GPIO_46 /* UART2 RX */
> + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
> + (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
> +
> + GPIO_47 /* UART2 TX */
> + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
> + (PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
> +
> + GPIO_75 /* I2S1_BCLK -- PCH_WP */
> + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP)
> + (PAD_CFG1_PULL_UP_20K | PAD_CFG1_IOSSTATE_TXD_RXE)
> +
> + /* I2C2 - TPM */
> + GPIO_128 /* LPSS_I2C2_SDA */
> + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
> + (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
> + GPIO_129 /* LPSS_I2C2_SCL */
> + (PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
> + (PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
> + GPIO_28 /* TPM IRQ */
> + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
> + PAD_CFG0_TX_DISABLE | PAD_CFG0_ROUTE_IOAPIC |
> + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_INVERT)
> + (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TXD_RXE)
> +
> + /*
> + * WLAN_PE_RST - default to deasserted just in case FSP
> + * misbehaves
> + */
> + GPIO_122 /* SIO_SPI_2_RXD */
> + (PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
> + PAD_CFG0_RX_DISABLE | 0)
> + (PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
> +
> + /* LPC */
> + PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
> + PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
> + PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
> + PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */
> + PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */
> + PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */
> + PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */
> + PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
> + PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
> + >;
> +
> + lpddr4-swizzle = /bits/ 8 <
> + /* LP4_PHYS_CH0A */
> +
> + /* DQA[0:7] pins of LPDDR4 module */
> + 6 7 5 4 3 1 0 2
> + /* DQA[8:15] pins of LPDDR4 module */
> + 12 10 11 13 14 8 9 15
> + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */
> + 16 22 23 20 18 17 19 21
> + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */
> + 30 28 29 25 24 26 27 31
> +
> + /* LP4_PHYS_CH0B */
> + /* DQA[0:7] pins of LPDDR4 module */
> + 7 3 5 2 6 0 1 4
> + /* DQA[8:15] pins of LPDDR4 module */
> + 9 14 12 13 10 11 8 15
> + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */
> + 20 22 23 16 19 17 18 21
> + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */
> + 28 24 26 27 29 30 31 25
> +
> + /* LP4_PHYS_CH1A */
> +
> + /* DQA[0:7] pins of LPDDR4 module */
> + 2 1 6 7 5 4 3 0
> + /* DQA[8:15] pins of LPDDR4 module */
> + 11 10 8 9 12 15 13 14
> + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */
> + 17 23 19 16 21 22 20 18
> + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */
> + 31 29 26 25 28 27 24 30
> +
> + /* LP4_PHYS_CH1B */
> +
> + /* DQA[0:7] pins of LPDDR4 module */
> + 4 3 7 5 6 1 0 2
> + /* DQA[8:15] pins of LPDDR4 module */
> + 15 9 8 11 14 13 12 10
> + /* DQB[0:7] pins of LPDDR4 module with offset of 16 */
> + 20 23 22 21 18 19 16 17
> + /* DQB[7:15] pins of LPDDR4 module with offset of 16 */
> + 25 28 30 31 26 27 24 29>;
> +};
> +
> +&fsp_s {
> + u-boot,dm-pre-proper;
> +
> + /* Disable unused clkreq of PCIe root ports */
> + pcie-rp-clkreq-pin = /bits/ 8 <0 /* wifi/bt */
> + CLKREQ_DISABLED
> + CLKREQ_DISABLED
> + CLKREQ_DISABLED
> + CLKREQ_DISABLED
> + CLKREQ_DISABLED>;
> +
> + /*
> + * GPIO for PERST_0
> + * If the Board has PERST_0 signal, assign the GPIO
> + * If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
> + *
> + * This are not used yet, so comment them out for now.
> + *
> + * prt0-gpio = <GPIO_122>;
> + *
> + * GPIO for SD card detect
> + * sdcard-cd-gpio = <GPIO_177>;
> + */
> +
> + /*
> + * Order is emmc-tx-data-cntl1, emmc-tx-data-cntl2,
> + * emmc-rx-cmd-data-cntl1, emmc-rx-cmd-data-cntl2
> + *
> + * EMMC TX DATA Delay 1
> + * Refer to EDS-Vol2-22.3
> + * [14:8] steps of delay for HS400, each 125ps
> + * [6:0] steps of delay for SDR104/HS200, each 125ps
> +
> + /*
> + * EMMC TX DATA Delay 2
> + * Refer to EDS-Vol2-22.3.
> + * [30:24] steps of delay for SDR50, each 125ps
> + * [22:16] steps of delay for DDR50, each 125ps
> + * [14:8] steps of delay for SDR25/HS50, each 125ps
> + * [6:0] steps of delay for SDR12, each 125ps
> + */
> +
> + /*
> + * EMMC RX CMD/DATA Delay 1
> + * Refer to EDS-Vol2-22.3.
> + * [30:24] steps of delay for SDR50, each 125ps
> + * [22:16] steps of delay for DDR50, each 125ps
> + * [14:8] steps of delay for SDR25/HS50, each 125ps
> + * [6:0] steps of delay for SDR12, each 125ps
> + */
> +
> + /*
> + * EMMC RX CMD/DATA Delay 2
> + * Refer to EDS-Vol2-22.3.
> + * [17:16] stands for Rx Clock before Output Buffer
> + * [14:8] steps of delay for Auto Tuning Mode, each 125ps
> + * [6:0] steps of delay for HS200, each 125ps
> + */
> + emmc = <0x0c16 0x28162828 0x00181717 0x10008>;
> +
> + /* Enable DPTF */
> + dptf-enable;
> +
> + /* Enable Audio Clock and Power gating */
> + hdaudio-clk-gate-enable;
> + hdaudio-pwr-gate-enable;
> + hdaudio-bios-config-lockdown;
> +
> + /* Enable lpss s0ix */
> + lpss-s0ix-enable;
> +
> + /*
> + * TODO(sjg at chromium.org): Move this to the I2C nodes
> + * Intel Common SoC Config
> + *+-------------------+---------------------------+
> + *| Field | Value |
> + *+-------------------+---------------------------+
> + *| I2C0 | Audio |
> + *| I2C2 | TPM |
> + *| I2C3 | Touchscreen |
> + *| I2C4 | Trackpad |
> + *| I2C5 | Digitizer |
> + *+-------------------+---------------------------+
> + *
> + common_soc_config" = "{
> + .i2c[0] = {
> + .speed = I2C_SPEED_FAST,
> + .rise-time-ns = 104,
> + .fall-time-ns = 52,
> + },
> + .i2c[2] = {
> + .early_init = 1,
> + .speed = I2C_SPEED_FAST,
> + .rise-time-ns = 57,
> + .fall-time-ns = 28,
> + },
> + .i2c[3] = {
> + .speed = I2C_SPEED_FAST,
> + .rise-time-ns = 76,
> + .fall-time-ns = 164,
> + },
> + .i2c[4] = {
> + .speed = I2C_SPEED_FAST,
> + .rise-time-ns = 114,
> + .fall-time-ns = 164,
> + .data_hold_time_ns = 350,
> + },
> + .i2c[5] = {
> + .speed = I2C_SPEED_FAST,
> + .rise-time-ns = 152,
> + .fall-time-ns = 30,
> + },
> + }"
> + */
> +
> + /* Minimum SLP S3 assertion width 28ms */
> + slp-s3-assertion-width-usecs = <28000>;
> +
> + pads = <
> + /* PCIE_WAKE[0:3]_N */
> + PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE) /* WLAN */
> + PAD_CFG_GPI(GPIO_206, UP_20K, DEEP) /* Unused */
> + PAD_CFG_GPI(GPIO_207, UP_20K, DEEP) /* Unused */
> + PAD_CFG_GPI(GPIO_208, UP_20K, DEEP) /* Unused */
> +
> + /* EMMC interface */
> + PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1) /* EMMC_CLK */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D0 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_158, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D1 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_159, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D2 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_160, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D3 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_161, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D4 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D5 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D6 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_164, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D7 */
> + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_CMD */
> + PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1) /* EMMC_RCLK */
> +
> + /* SDIO -- unused */
> + PAD_CFG_GPI(GPIO_166, UP_20K, DEEP) /* SDIO_CLK */
> + PAD_CFG_GPI(GPIO_167, UP_20K, DEEP) /* SDIO_D0 */
> + /* Configure SDIO to enable power gating */
> + PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1) /* SDIO_D1 */
> + PAD_CFG_GPI(GPIO_169, UP_20K, DEEP) /* SDIO_D2 */
> + PAD_CFG_GPI(GPIO_170, UP_20K, DEEP) /* SDIO_D3 */
> + PAD_CFG_GPI(GPIO_171, UP_20K, DEEP) /* SDIO_CMD */
> +
> + /* SDCARD */
> + /* Pull down clock by 20K */
> + PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1) /* SDCARD_CLK */
> + PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1) /* SDCARD_D0 */
> + PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1) /* SDCARD_D1 */
> + PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1) /* SDCARD_D2 */
> + PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1) /* SDCARD_D3 */
> + /* Card detect is active LOW with external pull up */
> + PAD_CFG_NF(GPIO_177, NONE, DEEP, NF1) /* SDCARD_CD_N */
> + PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1) /* SDCARD_CMD */
> + /* CLK feedback, internal signal, needs 20K pull down */
> + PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1) /* SDCARD_CLK_FB */
> + /* No h/w write proect for uSD cards, pull down by 20K */
> + PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1) /* SDCARD_LVL_WP */
> + /* EN_SD_SOCKET_PWR_L for SD slot power control. Default on */
> + PAD_CFG_GPO(GPIO_183, 0, DEEP) /* SDIO_PWR_DOWN_N */
> +
> + /* SMBus -- unused */
> + PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP) /* SMB_ALERT _N */
> + PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP) /* SMB_CLK */
> + PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP) /* SMB_DATA */
> +
> + /* LPC */
> + PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
> + PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
> + PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
> + PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */
> + PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */
> + PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */
> + PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */
> + PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
> + PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
> +
> + /* I2C0 - Audio */
> + PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1) /* LPSS_I2C0_SDA */
> + PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1) /* LPSS_I2C0_SCL */
> +
> + /* I2C1 - NFC with external pulls */
> + PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1) /* LPSS_I2C1_SDA */
> + PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1) /* LPSS_I2C1_SCL */
> +
> + /* I2C2 - TPM */
> + PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1) /* LPSS_I2C2_SDA */
> + PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1) /* LPSS_I2C2_SCL */
> +
> + /* I2C3 - touch */
> + PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1) /* LPSS_I2C3_SDA */
> + PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1) /* LPSS_I2C3_SCL */
> +
> + /* I2C4 - trackpad */
> + /* LPSS_I2C4_SDA */
> + PAD_CFG_NF_IOSSTATE(GPIO_132, UP_2K, DEEP, NF1, HIZCRX1)
> + /* LPSS_I2C4_SCL */
> + PAD_CFG_NF_IOSSTATE(GPIO_133, UP_2K, DEEP, NF1, HIZCRX1)
> +
> + /* I2C5 -- pen with external pulls */
> + PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1) /* LPSS_I2C5_SDA */
> + PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1) /* LPSS_I2C5_SCL */
> +
> + /* I2C6-7 -- unused */
> + PAD_CFG_GPI(GPIO_136, UP_20K, DEEP) /* LPSS_I2C6_SDA */
> + PAD_CFG_GPI(GPIO_137, UP_20K, DEEP) /* LPSS_I2C6_SCL */
> + PAD_CFG_GPI(GPIO_138, UP_20K, DEEP) /* LPSS_I2C7_SDA */
> + PAD_CFG_GPI(GPIO_139, UP_20K, DEEP) /* LPSS_I2C7_SCL */
> +
> + /* Audio Amp - I2S6 */
> + PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2) /* ISH_GPIO_0 - I2S6_BCLK */
> + PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2) /* ISH_GPIO_1 - I2S6_WS_SYNC */
> + PAD_CFG_GPI(GPIO_148, UP_20K, DEEP) /* ISH_GPIO_2 - unused */
> + PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2) /* ISH_GPIO_3 - I2S6_SDO */
> +
> + /* NFC Reset */
> + PAD_CFG_GPO(GPIO_150, 1, DEEP) /* ISH_GPIO_4 */
> +
> + PAD_CFG_GPI(GPIO_151, UP_20K, DEEP) /* ISH_GPIO_5 - unused */
> +
> + /* Touch enable */
> + PAD_CFG_GPO(GPIO_152, 1, DEEP) /* ISH_GPIO_6 */
> +
> + PAD_CFG_GPI(GPIO_153, UP_20K, DEEP) /* ISH_GPIO_7 - unused */
> + PAD_CFG_GPI(GPIO_154, UP_20K, DEEP) /* ISH_GPIO_8 - unused */
> + PAD_CFG_GPI(GPIO_155, UP_20K, DEEP) /* ISH_GPIO_9 - unused */
> +
> + /* PCIE_CLKREQ[0:3]_N */
> + PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1) /* WLAN with external pull */
> + PAD_CFG_GPI(GPIO_210, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_211, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_212, UP_20K, DEEP) /* unused */
> +
> + /* OSC_CLK_OUT_[0:4] -- unused */
> + PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP)
> + PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP)
> + PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP)
> + PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP)
> + PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP)
> +
> + /* PMU Signals */
> + PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP) /* PMU_AC_PRESENT - unused */
> + PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1) /* PMU_BATLOW_N */
> + PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1) /* PMU_PLTRST_N */
> + PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1) /* PMU_PWRBTN_N */
> + PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1) /* PMU_RSTBTN_N */
> + PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE) /* PMU_SLP_S0_N */
> + PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1) /* PMU_SLP_S3_N */
> + PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1) /* PMU_SLP_S4_N */
> + PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1) /* PMU_SUSCLK */
> + PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP) /* EN_PP3300_EMMC */
> + PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1) /* SUS_STAT_N */
> + PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1) /* SUSPWRDNACK */
> +
> + /* DDI[0:1] SDA and SCL -- unused */
> + PAD_CFG_GPI(GPIO_187, UP_20K, DEEP) /* HV_DDI0_DDC_SDA */
> + PAD_CFG_GPI(GPIO_188, UP_20K, DEEP) /* HV_DDI0_DDC_SCL */
> + PAD_CFG_GPI(GPIO_189, UP_20K, DEEP) /* HV_DDI1_DDC_SDA */
> + PAD_CFG_GPI(GPIO_190, UP_20K, DEEP) /* HV_DDI1_DDC_SCL */
> +
> + /* MIPI I2C -- unused */
> + PAD_CFG_GPI(GPIO_191, UP_20K, DEEP) /* MIPI_I2C_SDA */
> + PAD_CFG_GPI(GPIO_192, UP_20K, DEEP) /* MIPI_I2C_SCL */
> +
> + /* Panel 0 control */
> + PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1) /* PNL0_VDDEN */
> + PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1) /* PNL0_BKLTEN */
> + PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1) /* PNL0_BKLTCTL */
> +
> + /* Panel 1 control -- unused */
> + PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1) /* PNL1_VDDEN */
> + PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1) /* PNL1_BKLTEN */
> + PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1) /* PNL1_BKLTCTL */
> +
> + /* Hot plug detect */
> + PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2) /* HV_DDI1_HPD */
> + PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2) /* HV_DDI0_HPD */
> +
> + /* MDSI signals -- unused */
> + PAD_CFG_GPI(GPIO_201, UP_20K, DEEP) /* MDSI_A_TE */
> + PAD_CFG_GPI(GPIO_202, UP_20K, DEEP) /* MDSI_A_TE */
> +
> + /* USB overcurrent pins */
> + PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1) /* USB_OC0_N */
> + PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1) /* USB_OC1_N */
> +
> + /* PMC SPI -- almost entirely unused */
> + PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP)
> + PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2) /* HV_DDI2_HPD -- EDP HPD */
> + PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP)
> + PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP)
> + PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP)
> + PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP)
> +
> + /* PMIC Signals Unused signals related to an old PMIC interface */
> + PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE) /* PMIC_RESET_B */
> + PAD_CFG_GPI(GPIO_213, NONE, DEEP) /* unused external pull */
> + PAD_CFG_GPI(GPIO_214, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_215, UP_20K, DEEP) /* unused */
> + PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1) /* THERMTRIP_N */
> + PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP) /* unused */
> + PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1) /* PROCHOT_N */
> + PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1) /* PMIC_I2C_SCL */
> + PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1) /* PMIC_I2C_SDA */
> +
> + /* I2S1 -- largely unused */
> + PAD_CFG_GPI(GPIO_74, UP_20K, DEEP) /* I2S1_MCLK */
> + PAD_CFG_GPI(GPIO_75, UP_20K, DEEP) /* I2S1_BCLK -- PCH_WP */
> + PAD_CFG_GPO(GPIO_76, 0, DEEP) /* I2S1_WS_SYNC -- SPK_PA_EN */
> + PAD_CFG_GPI(GPIO_77, UP_20K, DEEP) /* I2S1_SDI */
> + PAD_CFG_GPO(GPIO_78, 1, DEEP) /* I2S1_SDO -- EN_PP3300_DX_LTE_SOC */
> +
> + /* DMIC or I2S4 */
> + /* AVS_DMIC_CLK_A1 */
> + PAD_CFG_NF_IOSSTATE(GPIO_79, NATIVE, DEEP, NF1, IGNORE)
> + PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1) /* AVS_DMIC_CLK_B1 */
> + PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_1 */
> + PAD_CFG_GPI(GPIO_82, DN_20K, DEEP) /* unused -- strap */
> + PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_2 */
> +
> + /* I2S2 -- Headset amp */
> + PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1) /* AVS_I2S2_MCLK */
> + PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1) /* AVS_I2S2_BCLK */
> + PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1) /* AVS_I2S2_SW_SYNC */
> + PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1) /* AVS_I2S2_SDI */
> + PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1) /* AVS_I2S2_SDO */
> +
> + /* I2S3 -- largely unused */
> + PAD_CFG_GPI(GPIO_89, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_90, UP_20K, DEEP) /* GPS_HOST_WAKE */
> + PAD_CFG_GPO(GPIO_91, 1, DEEP) /* GPS_EN */
> + PAD_CFG_GPI(GPIO_92, DN_20K, DEEP) /* unused -- strap */
> +
> + /* Fast SPI */
> + PAD_CFG_NF_IOSSTATE(GPIO_97, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CS0_B */
> + PAD_CFG_GPI(GPIO_98, UP_20K, DEEP) /* FST_SPI_CS1_B -- unused */
> + PAD_CFG_NF_IOSSTATE(GPIO_99, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MOSI_IO0 */
> + PAD_CFG_NF_IOSSTATE(GPIO_100, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MISO_IO1 */
> + PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */
> + PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */
> + PAD_CFG_NF_IOSSTATE(GPIO_103, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK */
> + PAD_CFG_NF_IOSSTATE(FST_SPI_CLK_FB, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK_FB */
> + PAD_CFG_NF_IOSSTATE(GPIO_106, NATIVE, DEEP, NF3, IGNORE) /* FST_SPI_CS2_N */
> +
> + /* SIO_SPI_0 - Used for FP */
> + PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1) /* SIO_SPI_0_CLK */
> + PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1) /* SIO_SPI_0_FS0 */
> + PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1) /* SIO_SPI_0_RXD */
> + PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1) /* SIO_SPI_0_TXD */
> +
> + /* SIO_SPI_1 -- largely unused */
> + PAD_CFG_GPI(GPIO_111, UP_20K, DEEP) /* SIO_SPI_1_CLK */
> + PAD_CFG_GPI(GPIO_112, UP_20K, DEEP) /* SIO_SPI_1_FS0 */
> + PAD_CFG_GPI(GPIO_113, UP_20K, DEEP) /* SIO_SPI_1_FS1 */
> + /* Headset interrupt */
> + PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP) /* SIO_SPI_1_RXD */
> + PAD_CFG_GPI(GPIO_117, UP_20K, DEEP) /* SIO_SPI_1_TXD */
> +
> + /* SIO_SPI_2 -- unused */
> + PAD_CFG_GPI(GPIO_118, UP_20K, DEEP) /* SIO_SPI_2_CLK */
> + PAD_CFG_GPI(GPIO_119, UP_20K, DEEP) /* SIO_SPI_2_FS0 */
> + PAD_CFG_GPI(GPIO_120, UP_20K, DEEP) /* SIO_SPI_2_FS1 */
> + PAD_CFG_GPI(GPIO_121, UP_20K, DEEP) /* SIO_SPI_2_FS2 */
> + /* WLAN_PE_RST - default to deasserted */
> + PAD_CFG_GPO(GPIO_122, 0, DEEP) /* SIO_SPI_2_RXD */
> + PAD_CFG_GPI(GPIO_123, UP_20K, DEEP) /* SIO_SPI_2_TXD */
> +
> + /* Debug tracing */
> + PAD_CFG_GPI(GPIO_0, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_1, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_2, UP_20K, DEEP)
> + PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL) /* FP_INT */
> + PAD_CFG_GPI(GPIO_4, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_5, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_6, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_7, UP_20K, DEEP)
> + PAD_CFG_GPI(GPIO_8, UP_20K, DEEP)
> +
> + PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP) /* dTPM IRQ */
> + PAD_CFG_GPI(GPIO_10, DN_20K, DEEP) /* Board phase enforcement */
> + PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE) /* EC SCI */
> + PAD_CFG_GPI(GPIO_12, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI_APIC_LOW(GPIO_13, NONE, DEEP) /* PEN_INT_ODL */
> + PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP) /* FP_INT */
> + PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE) /* TRACKPAD_INT_1V8_ODL */
> + PAD_CFG_GPI(GPIO_16, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_17, UP_20K, DEEP) /* 1 vs 4 DMIC config */
> + PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP) /* Trackpad IRQ */
> + PAD_CFG_GPI(GPIO_19, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP) /* NFC IRQ */
> + PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP) /* Touch IRQ */
> + PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, EDGE_SINGLE) /* EC wake */
> + PAD_CFG_GPI(GPIO_23, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_24, NONE, DEEP) /* PEN_PDCT_ODL */
> + PAD_CFG_GPI(GPIO_25, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_26, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI(GPIO_27, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP) /* TPM IRQ */
> + PAD_CFG_GPO(GPIO_29, 1, DEEP) /* FP reset */
> + PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP) /* KB IRQ */
> + PAD_CFG_GPO(GPIO_31, 0, DEEP) /* NFC FW DL */
> + PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5) /* SUS_CLK2 */
> + PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP) /* PMIC IRQ */
> + PAD_CFG_GPI(GPIO_34, UP_20K, DEEP) /* unused */
> + PAD_CFG_GPO(GPIO_35, 0, DEEP) /* PEN_RESET - active high */
> + PAD_CFG_GPO(GPIO_36, 0, DEEP) /* touch reset */
> + PAD_CFG_GPI(GPIO_37, UP_20K, DEEP) /* unused */
> +
> + /* LPSS_UART[0:2] */
> + PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/
> + /* Next 2 are straps */
> + PAD_CFG_GPI(GPIO_39, DN_20K, DEEP) /* LPSS_UART0_TXD - unused */
> + PAD_CFG_GPI(GPIO_40, DN_20K, DEEP) /* LPSS_UART0_RTS - unused */
> + PAD_CFG_GPI(GPIO_41, NONE, DEEP) /* LPSS_UART0_CTS - EC_IN_RW */
> + PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1) /* LPSS_UART1_RXD */
> + PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1) /* LPSS_UART1_TXD */
> + PAD_CFG_GPO(GPIO_44, 1, DEEP) /* GPS_RST_ODL */
> + PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */
> + PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1) /* LPSS_UART2_RXD */
> + PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, TX1_RX_DCR_X0) /* UART2 TX */
> + PAD_CFG_GPI(GPIO_48, UP_20K, DEEP) /* LPSS_UART2_RTS - unused */
> + PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE) /* LPSS_UART2_CTS - EC_SMI_L */
> +
> + /* Camera interface -- completely unused */
> + PAD_CFG_GPI(GPIO_62, UP_20K, DEEP) /* GP_CAMERASB00 */
> + PAD_CFG_GPI(GPIO_63, UP_20K, DEEP) /* GP_CAMERASB01 */
> + PAD_CFG_GPI(GPIO_64, UP_20K, DEEP) /* GP_CAMERASB02 */
> + PAD_CFG_GPI(GPIO_65, UP_20K, DEEP) /* GP_CAMERASB03 */
> + PAD_CFG_GPI(GPIO_66, UP_20K, DEEP) /* GP_CAMERASB04 */
> + PAD_CFG_GPI(GPIO_67, UP_20K, DEEP) /* GP_CAMERASB05 */
> + PAD_CFG_GPI(GPIO_68, UP_20K, DEEP) /* GP_CAMERASB06 */
> + PAD_CFG_GPI(GPIO_69, UP_20K, DEEP) /* GP_CAMERASB07 */
> + PAD_CFG_GPI(GPIO_70, UP_20K, DEEP) /* GP_CAMERASB08 */
> + PAD_CFG_GPI(GPIO_71, UP_20K, DEEP) /* GP_CAMERASB09 */
> + PAD_CFG_GPI(GPIO_72, UP_20K, DEEP) /* GP_CAMERASB10 */
> + PAD_CFG_GPI(GPIO_73, UP_20K, DEEP) /* GP_CAMERASB11 */
> + >;
> +};
> diff --git a/board/google/Kconfig b/board/google/Kconfig
> index 679a0f1023..0593833fd2 100644
> --- a/board/google/Kconfig
> +++ b/board/google/Kconfig
> @@ -60,8 +60,23 @@ config TARGET_CHROMEBOOK_SAMUS_TPL
> between different A/B versions of SPL/U-Boot, to allow upgrading of
> almost all U-Boot code in the field.
>
> +config TARGET_CHROMEBOOK_CORAL
nits: please put this in an alphabetical order
> + bool "Chromebook coral"
> + help
> + This is a range of Intel-based laptops released in 2018. They use an
> + Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB of
> + LPDDR4 1600MHz SDRAM, PCIe WiFi and Bluetooth, eMMC (typically 32GB),
> + up two cameras (front-facing 720p and another 5MP option), USB SD
> + reader, microphone and speakers. It also includes two USB 3 Type A and
> + two Type C ports. The latter are used as power input and can also
> + charge external devices as well as a 4K external display. There is a
> + Chrome OS EC connected on LPC, a Cr50 secure chip from Google and
> + various display options. OEMs products include Acer Chromebook 11
> + (e.g. C732, CB11, CP311) and Lenovo Chromebook (100e, 300e, 500e).
> +
> endchoice
>
> +source "board/google/chromebook_coral/Kconfig"
> source "board/google/chromebook_link/Kconfig"
> source "board/google/chromebox_panther/Kconfig"
> source "board/google/chromebook_samus/Kconfig"
> diff --git a/board/google/chromebook_coral/Kconfig b/board/google/chromebook_coral/Kconfig
> new file mode 100644
> index 0000000000..940bee89b0
> --- /dev/null
> +++ b/board/google/chromebook_coral/Kconfig
> @@ -0,0 +1,43 @@
> +if TARGET_CHROMEBOOK_CORAL
> +
> +config SYS_BOARD
> + default "chromebook_coral"
> +
> +config SYS_VENDOR
> + default "google"
> +
> +config SYS_SOC
> + default "apollolake"
> +
> +config SYS_CONFIG_NAME
> + default "chromebook_coral"
> +
> +config SYS_TEXT_BASE
> + default 0xffe00000
> +
> +config BOARD_SPECIFIC_OPTIONS # dummy
> + def_bool y
> + select X86_RESET_VECTOR
> + select INTEL_APOLLOLAKE
> + select BOARD_ROMSIZE_KB_16384
> +
> +config PCIE_ECAM_BASE
> + default 0xf0000000
> +
> +config EARLY_POST_CROS_EC
> + bool "Enable early post to Chrome OS EC"
> + help
> + Allow post codes to be sent to the Chroem OS EC early during boot,
> + to enable monitoring of the boot and debugging when things go wrong.
> + With this option enabled, the EC console can be used to watch post
> + codes the first part of boot.
> +
> +config SYS_CAR_ADDR
> + hex
> + default 0xfef00000
> +
> +config SYS_CAR_SIZE
> + hex
> + default 0xc0000
> +
> +endif
> diff --git a/board/google/chromebook_coral/MAINTAINERS b/board/google/chromebook_coral/MAINTAINERS
> new file mode 100644
> index 0000000000..904227e2e2
> --- /dev/null
> +++ b/board/google/chromebook_coral/MAINTAINERS
> @@ -0,0 +1,6 @@
> +CHROMEBOOK_CORAL_BOARD
> +M: Simon Glass <sjg at chromium.org>
> +S: Maintained
> +F: board/google/chromebook_coral/
> +F: include/configs/chromebook_coral.h
> +F: configs/chromebook_coral_defconfig
> diff --git a/board/google/chromebook_coral/Makefile b/board/google/chromebook_coral/Makefile
> new file mode 100644
> index 0000000000..6a27ce3da1
> --- /dev/null
> +++ b/board/google/chromebook_coral/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright 2019 Google LLC
> +
> +obj-y += coral.o
> diff --git a/board/google/chromebook_coral/coral.c b/board/google/chromebook_coral/coral.c
> new file mode 100644
> index 0000000000..dfe0fa484a
> --- /dev/null
> +++ b/board/google/chromebook_coral/coral.c
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 Google LLC
> + */
> +
> +#include <common.h>
> +
> +int arch_misc_init(void)
> +{
> + return 0;
> +}
> +
> +int board_run_command(const char *cmdline)
> +{
> + printf("No command line\n");
> +
> + return 0;
> +}
Drop this function since it does nothing?
> diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig
> new file mode 100644
> index 0000000000..566d47d22f
> --- /dev/null
> +++ b/configs/chromebook_coral_defconfig
> @@ -0,0 +1,102 @@
> +CONFIG_X86=y
> +CONFIG_SYS_TEXT_BASE=0x1110000
> +CONFIG_SYS_MALLOC_F_LEN=0x3d00
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000
> +CONFIG_NR_DRAM_BANKS=8
> +CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_BASE=0xde000000
> +CONFIG_DEBUG_UART_CLOCK=1843200
> +CONFIG_VENDOR_GOOGLE=y
> +CONFIG_TARGET_CHROMEBOOK_CORAL=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_FSP_VERSION2=y
> +CONFIG_HAVE_ACPI_RESUME=y
> +CONFIG_INTEL_CAR_CQOS=y
> +CONFIG_X86_OFFSET_U_BOOT=0xffe00000
> +CONFIG_X86_OFFSET_SPL=0xffe80000
> +CONFIG_SPL_TEXT_BASE=0xfef10000
> +CONFIG_BOOTSTAGE=y
> +CONFIG_SPL_BOOTSTAGE=y
> +CONFIG_TPL_BOOTSTAGE=y
> +CONFIG_BOOTSTAGE_REPORT=y
> +CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10
> +CONFIG_BOOTSTAGE_STASH=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro earlyprintk console=tty0 console=ttyS0,115200"
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_SPL_LOG=y
> +CONFIG_LOG_DEFAULT_LEVEL=7
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_LAST_STAGE_INIT=y
> +CONFIG_BLOBLIST=y
> +# CONFIG_TPL_BLOBLIST is not set
> +CONFIG_BLOBLIST_ADDR=0x100000
> +CONFIG_HANDOFF=y
> +CONFIG_TPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_CPU_SUPPORT=y
> +CONFIG_SPL_PCI=y
> +# CONFIG_SPL_SPI_FLASH_TINY is not set
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_CPU=y
> +CONFIG_CMD_PMC=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_PART=y
> +CONFIG_CMD_READ=y
> +CONFIG_CMD_SATA=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_SOUND=y
> +CONFIG_CMD_BOOTSTAGE=y
> +CONFIG_CMD_TPM=y
> +CONFIG_CMD_TPM_TEST=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_MAC_PARTITION=y
> +# CONFIG_SPL_MAC_PARTITION is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_ISO_PARTITION=y
> +CONFIG_EFI_PARTITION=y
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="chromebook_coral"
> +# CONFIG_NET is not set
> +CONFIG_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_CPU=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_DW=y
> +CONFIG_TPL_MISC=y
> +CONFIG_CROS_EC=y
> +CONFIG_CROS_EC_LPC=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +# CONFIG_X86_PCH7 is not set
> +# CONFIG_X86_PCH9 is not set
> +CONFIG_PINCTRL=y
> +# CONFIG_SPL_PINCTRL_FULL is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550=y
> +CONFIG_SOUND=y
> +CONFIG_SOUND_I8254=y
> +CONFIG_SOUND_RT5677=y
> +CONFIG_SPI=y
> +CONFIG_ICH_SPI=y
> +CONFIG_TPL_SYSRESET=y
> +CONFIG_TPM_TIS_LPC=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_SPL_FS_CBFS=y
> +# CONFIG_SPL_USE_TINY_PRINTF is not set
> +CONFIG_TPL_USE_TINY_PRINTF=y
> +CONFIG_CMD_DHRYSTONE=y
> +CONFIG_TPM=y
> +# CONFIG_EFI_LOADER is not set
> diff --git a/doc/board/google/chromebook_coral.rst b/doc/board/google/chromebook_coral.rst
> new file mode 100644
> index 0000000000..515fd06d76
> --- /dev/null
> +++ b/doc/board/google/chromebook_coral.rst
> @@ -0,0 +1,241 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +.. sectionauthor:: Simon Glass <sjg at chromium.org>
> +
> +Chromebook Coral
> +================
> +
> +Coral is a Chromebook (or really about 20 different Chromebooks) which use the
> +Intel Apollo Lake platform (APL). The 'reef' Chromebooks use the same APL SoC so
> +should also work. Some later ones based on Glacier Lake (GLK) need various
> +changes in GPIOs, etc. but are very similar.
> +
> +It is hoped that this port can enable ports to embedded APL boards which are
> +starting to appear.
> +
> +Note that booting U-Boot on APL is already supported by coreboot and
> +Slim Bootloader. This documentation refers to a 'bare metal' port.
> +
> +
> +Boot flow - TPL
> +---------------
> +
> +Apollo Lake boots via an IFWI (Integrated Firmware Image). TPL is placed in
> +this, in the IBBL entry.
> +
> +On boot, an on-chip microcontroller called the CSE (Converged Security Engine)
> +sets up some SDRAM at ffff8000 and loads the TPL image to that address. The
> +SRAM extends up to the top of 32-bit address space, but the last 2KB is the
> +start16 region, so the TPL image must be 30KB at most, and CONFIG_TPL_TEXT_BASE
> +must be ffff8000. Actually the start16 region is small and it could probably
> +move from f800 to fe00, providing another 1.5KB, but TPL is only about 19KB so
> +there is no need to change it at present. The size limit is enforced by
> +CONFIG_TPL_SIZE_LIMIT to avoid producing images that won't boot.
> +
> +TPL (running from start.S) first sets up CAR (Cache-as-RAM) which provides
> +larger area of RAM for use while booting. CAR is mapped at CONFIG_SYS_CAR_ADDR
> +(fef00000) and is 768KB in size. It then sets up the stack in the botttom 64KB
> +of this space (i.e. below fef10000). This means that the stack and early
> +malloc() region in TPL can be 64KB at most.
> +
> +TPL operates without CONFIG_TPL_PCI enabled so PCI config access must use the
> +x86-specific functions pci_x86_write_config(), etc. SPL creates a simple-bus
> +device so that PCI devices are bound by driver model. Then arch_cpu_init_tpl()
> +is called to early init on various devices. This includes placing PCI devices
> +at hard-coded addresses in the memory map. PCI auto-config is not used.
> +
> +Most of the 16KB ROM is mapped into the very top of memory, except for the
> +Intel descriptor (first 4KB) and the space for SRAM as above.
> +
> +TPL does not set up a bloblist since at present it does not have anything to
> +pass to SPL.
> +
> +Once TPL is done it loads SPL from ROM using either the memory-mapped SPI or by
> +using the Intel fast SPI driver. SPL is loaded into CAR, at the address given
> +by CONFIG_SPL_TEXT_BASE, which is normally fef10000.
> +
> +Note that booting using the SPI driver results in an TPL image that is about
> +26KB in size instead of 19KB. Also boot speed is worse by about 340ms. If you
> +really want to use the driver, enable CONFIG_APL_SPI_FLASH_BOOT and set
> +BOOT_FROM_FAST_SPI_FLASH to true[2].
> +
> +
> +Boot flow - SPL
> +---------------
> +
> +SPL (running from start_from_tpl.S) continues to use the same stack as TPL.
> +It calls arch_cpu_init_spl() to set up a few devices, then init_dram() loads
> +the FSP-M binary into CAR and runs to, to set up SDRAM. The address of the
> +output 'HOB' list (Hand-off-block) is stored into gd->arch.hob_list for parsing.
> +There is a 2GB chunk of SDRAM starting at 0 and the rest is at 4GB.
> +
> +PCI auto-config is not used in SPL either, but CONFIG_SPL_PCI is defined, so
> +proper PCI access is available and normal dm_pci_read_config() calls can be
> +used. However PCI auto-config is not used so the same static memory mapping set
> +up by TPL is still active.
> +
> +SPL on x86 always runs with CONFIG_SPL_SEPARATE_BSS=y and BSS is at 120000
> +(see u-boot-spl.lds). This works because SPL doesn't access BSS until after
> +board_init_r(), as per the rules, and DRAM is available then.
> +
> +SPL sets up a bloblist and passes the SPL hand-off information to U-Boot proper.
> +This includes a pointer to the HOB list as well as DRAM information. See
> +struct arch_spl_handoff. The bloblist address is set by CONFIG_BLOBLIST_ADDR,
> +normally 100000.
> +
> +SPL uses SPI flash to update the MRC caches in ROM. This speeds up subsequent
> +boots. Be warned that SPL can take 30 seconds without this cache! This is a
> +known issue with Intel SoCs with modern DRAM and apparently cannot be improved.
> +The MRC caches are used to work around this.
> +
> +Once SPL is finished it loads U-Boot into SDRAM at CONFIG_SYS_TEXT_BASE, which
> +is normally 1110000. Note that CAR is still active.
> +
> +
> +Boot flow - U-Boot pre-relocation
> +---------------------------------
> +
> +U-Boot (running from start_from_spl.S) starts running in RAM and uses the same
> +stack as SPL. It does various init activities before relocation. Notably
> +arch_cpu_init_dm() sets up the pin muxing for the chip using a very large table
> +in the device tree.
> +
> +PCI auto-config is not used before relocation, but CONFIG_PCI of course is
> +defined, so proper PCI access is available. The same static memory mapping set
> +up by TPL is still active until relocation.
> +
> +As per usual, U-Boot allocates memory at the top of available RAM (a bit below
> +2GB in this case) and copies things there ready to relocate itself. Notably
> +reserve_arch() does not reserve space for the HOB list returned by FSP-M since
> +this is already located in RAM.
> +
> +U-Boot then shuts down CAR and jumps to its relocated version.
> +
> +
> +Boot flow - U-Boot post-relocation
> +---------------------------------
I suspect this will cause doc build warnings, that number of - not
equal to number of the title characters
> +
> +U-Boot starts up normally, running near the top of RAM. After driver model is
> +running, arch_fsp_init_r() is called which loads and runs the FSP-S binary.
> +This updates the HOB list to include graphics information, used by the fsp_video
> +driver.
> +
> +PCI autoconfig is done and a few devices are probed to complete init. Most
> +others are started only when they are used.
> +
> +Note that FSP-S is supposed to run after CAR has been shut down, which happens
> +immediately before U-Boot starts up in its relocated position. Therefore we
> +cannot run FSP-S before relocation. On the other hand we must run it before
> +PCI auto-config is done, since FSP-S may show or hide devices. The first device
> +that probes PCI after relocation is the serial port, in initr_serial(), so FSP-S
> +must run before that. A corollary is that loading FSP-S must be done without
> +using the SPI driver, to avoid probing PCI and causing an autoconfig, so
> +memory-mapped reading is always used for FSP-S.
> +
> +It would be possible to tear down CAR in SPL instead of U-Boot. The SPL handoff
> +information could make sure it does not include any pointers into CAR (in fact
> +it doesn't). But tearing down CAR in U-Boot allows the initial state used by TPL
> +and SPL to be read by U-Boot, which seems useful. It also matches how older
> +platforms start up (those that don't use SPL).
> +
> +
> +Performance
> +-----------
> +
> +Bootstage is used through all phases of U-Boot to keep accurate timimgs for
> +boot. Use 'bootstage report' in U-Boot to see the report, e.g.:
> +
> +Timer summary in microseconds (16 records):
> + Mark Elapsed Stage
> + 0 0 reset
> + 155,325 155,325 TPL
> + 204,014 48,689 end TPL
> + 204,385 371 SPL
> + 738,633 534,248 end SPL
> + 739,161 528 board_init_f
> + 842,764 103,603 board_init_r
> + 1,166,233 323,469 main_loop
> + 1,166,283 50 id=175
> +
> +Accumulated time:
> + 62 fast_spi
> + 202 dm_r
> + 7,779 dm_spl
> + 15,555 dm_f
> + 208,357 fsp-m
> + 239,847 fsp-s
> + 292,143 mmap_spi
> +
> +CPU performance is about 3500 DMIPS:
> +
> +=> dhry
> +1000000 iterations in 161 ms: 6211180/s, 3535 DMIPS
> +
> +
> +Partial memory map
> +------------------
> +
> +ffffffff Top of ROM (and last byte of 32-bit address space)
> +ffff8000 TPL loaded here (from IFWI)
> +ff000000 Bottom of ROM
> +fefc000 Top of CAR region
> +fef96000 Stack for FSP-M
> +fef40000 59000 FSP-M
> +fef11000 SPL loaded here
> +fef10000 CONFIG_BLOBLIST_ADDR
> +fef10000 Stack top in TPL, SPL and U-Boot before relocation
> +fef00000 1000 CONFIG_BOOTSTAGE_STASH_ADDR
> +fef00000 Base of CAR region
> +
> + f0000 CONFIG_ROM_TABLE_ADDR
> + 120000 BSS (defined in u-boot-spl.lds)
> + 200000 FSP-S (which is run after U-Boot is relocated)
> + 1110000 CONFIG_SYS_TEXT_BASE
> +
> +
> +Supported peripherals
> +---------------------
> +
> +- UART
> +- SPI flash
> +- Video
> +- MMC (dev 0) and micro-SD (dev 1)
> +- Chrome OS EC
> +- Keyboard
> +- USB
> +
> +
> +To do
> +-----
> +
> +- Finish peripherals
> + - left-side USB
> + - USB-C
> + - Cr50 (security chip: a basic driver is running but not included here)
> + - I2C (driver exists but not enabled in device tree)
> + - Sound (Intel I2S support exists, but need da7219 driver)
> + - RTC (driver exists but not enabled in device tree)
> + - Various minor features supported by LPC, etc.
> +- Booting Chrome OS, e.g. with verified boot
> +- Integrate with Chrome OS vboot
> +- Improvements to booting from coreboot (i.e. as a coreboot target)
> +- Use FSP-T binary instead of our own CAR implementation
> +- Use the official FSP package instead of the coreboot one
> +- Enable all CPU cores
> +- Suspend / resume
> +- ACPI
> +
> +
> +Credits
> +-------
> +
> +This is a spare-time project conducted slowly over a long period of time.
> +
> +Much of the code for this port came from Coreboot, an open-source firmware
> +project similar to U-Boot's SPL in terms of features.
> +
> +Also see [2] for information about the boot flow used by coreboot. It is
> +similar, but has an extra postcar stage. U-Boot doesn't need this since it
> +supports relocating itself in memory.
> +
> +
> +[2] Intel PDF https://www.coreboot.org/images/2/23/Apollolake_SoC.pdf
No [1]?
Please update doc/board/google/index.rst to include this document.
Well written doc!
> diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h
> new file mode 100644
> index 0000000000..a63c3c9eea
> --- /dev/null
> +++ b/include/configs/chromebook_coral.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2019 Google LLC
> + */
> +
> +/*
> + * board/config.h - configuration options, board-specific
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_BOOTCOMMAND \
> + "fatload mmc 1:c 1000000 syslinux/vmlinuz.A; zboot 1000000"
> +
> +#include <configs/x86-common.h>
> +#include <configs/x86-chromebook.h>
> +
> +#undef CONFIG_STD_DEVICES_SETTINGS
> +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \
> + "stdout=vidconsole,serial\0" \
> + "stderr=vidconsole,serial\0"
> +
> +#define CONFIG_ENV_SECT_SIZE 0x1000
> +#define CONFIG_ENV_OFFSET 0x003f8000
> +
> +#define CONFIG_TPL_TEXT_BASE 0xffff8000
> +
> +#define CONFIG_SYS_NS16550_MEM32
> +#undef CONFIG_SYS_NS16550_PORT_MAPPED
> +
> +#endif /* __CONFIG_H */
> --
Regards,
Bin
More information about the U-Boot
mailing list