[PATCH 3/3] mx6slevk: Fix the pmic_get() parameter in the DM case

[Fabio Estevam]

When pmic_get() is used with DM the first parameter must be
the complete node name plus the unit address, so fix it
accordingly.

Reported-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 board/freescale/mx6slevk/mx6slevk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 33ae91c307..453f281418 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -145,7 +145,7 @@ int power_init_board(void)
 	u32 switch_num = 6;
 	u32 offset = PFUZE100_SW1CMODE;
 
-	ret = pmic_get("pfuze100", &dev);
+	ret = pmic_get("pfuze100 at 08", &dev);
 	if (ret == -ENODEV)
 		return 0;
 
-- 
2.17.1