[PATCH] arm64: zynqmp: Do not call bss init and board_init_r from board_init_f

Michal Simek michal.simek at xilinx.com
Thu Dec 19 15:58:30 CET 2019


There is no reason to clear bss and call board_init_r() from board_init_f()
beca it can be called directly from crt0_64.S with also support for SPL
stack relocation to SDRAM.
For more information please take a look at arch/arm/lib/crt0_64.S

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/mach-zynqmp/spl.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index 76bafcdd2a38..095b4e61a590 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -28,13 +28,6 @@ void board_init_f(ulong dummy)
 #endif
 	/* Delay is required for clocks to be propagated */
 	udelay(1000000);
-
-	debug("Clearing BSS 0x%p - 0x%p\n", __bss_start, __bss_end);
-	/* Clear the BSS */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* No need to call timer init - it is empty for ZynqMP */
-	board_init_r(NULL, 0);
 }
 
 static void ps_mode_reset(ulong mode)
-- 
2.24.0



More information about the U-Boot mailing list