[PATCH 0/1] Small patch series to add support for VoCore2 board.

[Daniel Schwierzeck]

Am 19.12.19 um 12:40 schrieb MCon:
> 
> Details about this SoM can be found at "https://vocore.io/v2.html".
> This port is working for me and able to boot Linux v5.0.
> Some subsystems (notably SD) are not working due to shortcomings
> of current drivers (e.g.: mtk_sd.c); they work in the booted Linux.
> 
> NOTE:
> This is my first attempt to use patman; any hint welcome.

1. you can omit the "Cover-letter" option if you want to send a single
patch only.

2. always run patman with -n/--dry-run before sending the patches out to
check for checkpatch.pl errors and fix them if needed

3. always run patman with -m to disable the automatic maintainer
detection. This usually bloats the CC list. It's better to specify the
relevant maintainers per patch. You could use the aliases from
doc/git-mailrc to save some typing, for instance:

to: uboot
cc: danielschwierzeck
cc: stroese


> 
> 
> MCon (1):
>   Port to new board "VoCore2"
> 
>  arch/mips/dts/Makefile        |  6 ++--
>  arch/mips/dts/vocore2.dts     | 62 +++++++++++++++++++++++++++++++++++
>  arch/mips/mach-mtmips/Kconfig |  9 +++++
>  board/vonger/vocore2/Kconfig  | 11 +++++++
>  board/vonger/vocore2/Makefile |  2 ++
>  board/vonger/vocore2/board.c  | 35 ++++++++++++++++++++
>  configs/vocore2_defconfig     | 61 ++++++++++++++++++++++++++++++++++
>  include/configs/vocore2.h     | 57 ++++++++++++++++++++++++++++++++
>  8 files changed, 240 insertions(+), 3 deletions(-)
>  create mode 100644 arch/mips/dts/vocore2.dts
>  create mode 100644 board/vonger/vocore2/Kconfig
>  create mode 100644 board/vonger/vocore2/Makefile
>  create mode 100644 board/vonger/vocore2/board.c
>  create mode 100644 configs/vocore2_defconfig
>  create mode 100644 include/configs/vocore2.h
> 

-- 
- Daniel