[U-Boot] [PATCHv2 1/3] mmc: meson-gx: Fix clk phase tuning for MMC
Anand Moon
linux.amoon at gmail.com
Tue Dec 24 14:25:49 CET 2019
As per mainline line kernel fix the clk tunnig phase for
mmc, set Core=180, Tx=0, Rx=0 clk phase for mmc initialization.
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
Changes from previous
use the mainline kernel tuning for clk tuning.
Fixed the commmit messages.
Patch v1:
https://patchwork.ozlabs.org/patch/1201208/
Before these changes.
clock is enabled (380953Hz)
clock is enabled (25000000Hz)
After these changes
clock is enabled (380953Hz)
clock is enabled (25000000Hz)
clock is enabled (52000000Hz)
Test on Odroid N2 and Odroid C2 with eMMC and microSD cards
---
arch/arm/include/asm/arch-meson/sd_emmc.h | 14 ++++++--------
drivers/mmc/meson_gx_mmc.c | 9 +++++----
2 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
index e3a72c8b66..d70fe4f03e 100644
--- a/arch/arm/include/asm/arch-meson/sd_emmc.h
+++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
@@ -7,6 +7,7 @@
#define __SD_EMMC_H__
#include <mmc.h>
+#include <linux/bitops.h>
#define SDIO_PORT_A 0
#define SDIO_PORT_B 1
@@ -19,14 +20,11 @@
#define CLK_MAX_DIV 63
#define CLK_SRC_24M (0 << 6)
#define CLK_SRC_DIV2 (1 << 6)
-#define CLK_CO_PHASE_000 (0 << 8)
-#define CLK_CO_PHASE_090 (1 << 8)
-#define CLK_CO_PHASE_180 (2 << 8)
-#define CLK_CO_PHASE_270 (3 << 8)
-#define CLK_TX_PHASE_000 (0 << 10)
-#define CLK_TX_PHASE_090 (1 << 10)
-#define CLK_TX_PHASE_180 (2 << 10)
-#define CLK_TX_PHASE_270 (3 << 10)
+
+#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
+#define CLK_TX_PHASE_MASK GENMASK(11, 10)
+#define CLK_RX_PHASE_MASK GENMASK(13, 12)
+
#define CLK_ALWAYS_ON BIT(24)
#define MESON_SD_EMMC_CFG 0x44
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index 86c1a7164a..402981c3bb 100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -52,10 +52,11 @@ static void meson_mmc_config_clock(struct mmc *mmc)
clk_div = DIV_ROUND_UP(clk, mmc->clock);
/* 180 phase core clock */
- meson_mmc_clk |= CLK_CO_PHASE_180;
-
- /* 180 phase tx clock */
- meson_mmc_clk |= CLK_TX_PHASE_000;
+ meson_mmc_clk |= CLK_CORE_PHASE_MASK;
+ /* 000 phase rx clock */
+ meson_mmc_clk |= CLK_RX_PHASE_MASK;
+ /* 000 phase tx clock */
+ meson_mmc_clk |= CLK_TX_PHASE_MASK;
/* clock settings */
meson_mmc_clk |= clk_src;
--
2.24.1
More information about the U-Boot
mailing list