[PATCH v4 00/16] efi_loader: add secure boot support
AKASHI Takahiro
takahiro.akashi at linaro.org
Wed Dec 18 01:44:56 CET 2019
One of major missing features in current UEFI implementation is "secure boot."
The ultimate goal of my attempt is to implement image authentication based
on signature and provide UEFI secure boot support which would be fully
compliant with UEFI specification, section 32[1].
(The code was originally developed by Patrick Wildt.)
Please note, however, this patch doesn't work on its own; there are
a couple of functional dependencies[2] and [3], that I have submitted
before. For complete workable patch set, see my repository[4],
which also contains experimental timestamp-based revocation suuport.
My "non-volatile" support[5], which is under discussion, is not mandatory
and so not included here, but this inevitably implies that, for example,
signature database variables, like db and dbx, won't be persistent unless you
explicitly run "env save" command and that UEFI variables are not separated
from U-Boot environment. Anyhow, Linaro is also working on implementing
real "secure storage" solution based on TF-A and OP-TEE.
Supported features:
* image authentication based on db and dbx
* supported signature types are
EFI_CERT_SHA256_GUID (SHA256 digest for unsigned images)
EFI_CERT_X509_GUID (x509 certificate for signed images)
* SecureBoot/SignatureSupport variables
* SetupMode and user mode
* variable authentication based on PK and KEK
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS
* basic pytest test cases
Unsupported features: (marked as TODO in most cases in the source code,
and won't be included in this series)
* hash algorithms other than SHA256
* dbt: timestamp(RFC6131)-based certificate revocation
* dbr: OS recovery
* xxxDefault: default values for signature stores
* transition to AuditMode and DeployedMode
* recording rejected images in EFI_IMAGE_EXECUTION_INFO_TABLE
* verification "policy", in particular, check against signature's owner
* private authenticated variables
* variable authentication with EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS
* real secure storage support, including hardware-specific PK (Platform Key)
installation
TODO's other than "Unsupported features": (won't be included in this series)
* fail recovery, in particular, in modifying authenticated variables
* support read-only attributes of well-defined global variables
in particular, "SignatureSupport"
* Extensive test suite (or more test cases) to confirm compatibility
with EDK2
=> I requested EDK SCT community to add tests[6].
Test:
* my pytest, included in this patch set, passed.
* efi_selftest passed. (At least no regression.)
* Travis CI tests have passed.
Known issues:
* efitools is used in pytest, and its version must be v1.5.2 or later.
(Solution: You can define EFITOOLS_PATH in defs.py for your own efitools.)
* Pytest depends on standalone "helloworld" app for sandbox
(Solution: You can define HELLO_PATH in defs.py or Heinrich's [7].)
Hints about how to use:
(Please see other documents, or my pytest scripts, for details.)
* You can create your own certificates with openssl.
* You can sign your application with sbsign (on Ubuntu).
* You can create raw data for signature database with efitools, and
install/manage authenticated variables with "env -set -e" command
or efitools' "UpdateVars.efi" application.
[1] https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
[2] https://lists.denx.de/pipermail/u-boot/2019-November/390127.html
(import x509/pkcs7 parsers from linux)
[3] https://lists.denx.de/pipermail/u-boot/2019-December/393977.html
(extend rsa_verify() for UEFI secure boot)
[4] http://git.linaro.org/people/takahiro.akashi/u-boot.git/ efi/secboot
[5] https://lists.denx.de/pipermail/u-boot/2019-September/382835.html
(non-volatile variables support)
[6] https://bugzilla.tianocore.org/show_bug.cgi?id=2230
[7] https://lists.denx.de/pipermail/u-boot/2019-November/389593.html
Changes in v4 (Dec 18, 2019)
* adjust EFI_SECURE_BOOT dependencies due to a change of RSA extension patch v5
(patch#2)
* change "imply" to "select" against kconfig dependencies (patch#2)
* otherwise, no functional changes
Changes in v3 (Dec 9, 2019)
* allow for arbitrary number of regions in efi_image_region_add()
(patch#3, #5 and #8)
* remove a redundant check in a while loop at efi_sigstore_free() (patch#4)
Changes in v2 (Nov 26, 2019)
* rebased to v2020.01-rc3
* rename IMAGE_DIRECTORY_ENTRY_CERTTABLE to IMAGE_DIRECTORY_ENTRY_SECURITY
(patch#1,#9)
* add comments (patch#1)
* drop v1's patch#2 as it is no longer necessary
* drop v1's patch#3 as other "SECURE_BOOT" architectures have renamed
this option and no longer use it
* add structure descriptions (patch#3)
* rework hash calculation code in efi_signature_verify() and remove
an odd constant, WinIndrectSha256 (patch#3)
* move travis.yml changes to a separate patch (patch#12, #16)
* yield_fixture() -> fixture() (patch#12)
* call console.restart_uboot() at every test case (13,#14)
* add patch#15; enable UEFI-related configurations by default on sandbox
* add patch#16; modify Travis CI environment to run UEFI secure boot test
Changes in v1 (Nov 13, 2019)
* rebased to v2020.01-rc
* remove already-merged patches
* re-work the patch set for easier reviews, including
- move a config definition patch forward (patch#4)
- refactor/rename verification functions (patch#5/#10)
- split signature database parser as a separate patch (patch#6)
- split secure state transition code as a separate patch (patch#8)
- move most part of init_secure_boot() into init_variables() (patch#8)
- split test environment setup from test patches (patch#14)
* add function descriptions (patch#5-#11)
* make sure the section list is sorted in ascending order in hash
calculation of PE image (patch#10)
* add a new "-at" (authenticated access) option to "env -e" (patch#13)
* list required host packages, in particular udisks2, in pytest
(patch#14)
* modify conftest.py to run under python3 (patch#14)
* use a partition on a disk instead of a whole disk without partition
table (patch#14)
* reduce dependency on efitools, yet relying on its host tools (patch#14)
* modify pytests to catch up wth latest changes of "env -e" syntax
(patch#15,#16)
RFC (Sept 18, 2019)
AKASHI Takahiro (16):
include: pe.h: add signature-related definitions
efi_loader: add CONFIG_EFI_SECURE_BOOT config option
efi_loader: add signature verification functions
efi_loader: add signature database parser
efi_loader: variable: support variable authentication
efi_loader: variable: add secure boot state transition
efi_loader: variable: add VendorKeys variable
efi_loader: image_loader: support image authentication
efi_loader: set up secure boot
cmd: env: use appropriate guid for authenticated UEFI variable
cmd: env: add "-at" option to "env set -e" command
efi_loader, pytest: set up secure boot environment
efi_loader, pytest: add UEFI secure boot tests (authenticated
variables)
efi_loader, pytest: add UEFI secure boot tests (image)
sandbox: add extra configurations for UEFI and related tests
travis: add packages for UEFI secure boot test
.travis.yml | 11 +-
cmd/nvedit.c | 5 +-
cmd/nvedit_efi.c | 23 +-
configs/sandbox64_defconfig | 3 +
configs/sandbox_defconfig | 3 +
include/efi_api.h | 87 ++
include/efi_loader.h | 85 +-
include/pe.h | 18 +
lib/efi_loader/Kconfig | 19 +
lib/efi_loader/Makefile | 1 +
lib/efi_loader/efi_boottime.c | 2 +-
lib/efi_loader/efi_image_loader.c | 454 ++++++++-
lib/efi_loader/efi_setup.c | 38 +
lib/efi_loader/efi_signature.c | 810 +++++++++++++++
lib/efi_loader/efi_variable.c | 951 ++++++++++++++++--
test/py/README.md | 8 +
test/py/tests/test_efi_secboot/conftest.py | 151 +++
test/py/tests/test_efi_secboot/defs.py | 21 +
.../py/tests/test_efi_secboot/test_authvar.py | 282 ++++++
test/py/tests/test_efi_secboot/test_signed.py | 99 ++
.../tests/test_efi_secboot/test_unsigned.py | 103 ++
21 files changed, 3046 insertions(+), 128 deletions(-)
create mode 100644 lib/efi_loader/efi_signature.c
create mode 100644 test/py/tests/test_efi_secboot/conftest.py
create mode 100644 test/py/tests/test_efi_secboot/defs.py
create mode 100644 test/py/tests/test_efi_secboot/test_authvar.py
create mode 100644 test/py/tests/test_efi_secboot/test_signed.py
create mode 100644 test/py/tests/test_efi_secboot/test_unsigned.py
--
2.24.0
More information about the U-Boot
mailing list