[PATCH v1] colibri_imx7: disable HAB and CAAM support
Oleksandr Suvorov
cryosay at gmail.com
Thu Dec 19 15:13:49 CET 2019
On Thu, Dec 19, 2019 at 12:55 PM Igor Opaniuk <igor.opaniuk at gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>
> Currently Colibri iMX7 NAND version doesn't boot at all with
> HABv4 support enabled. If CSF section is included in the final
> imx binary, BootROM every time switches to usb recovery mode.
> However eMMC version of the same SoM works without any issues.
>
> Disable HAB and CAAM support for now until the problem is properly
> investigated and fixed.
>
> For additional details about the problem check [2], [3], [4].
>
> [1] https://www.nxp.com/docs/en/application-note/AN4581.pdf
> [2] https://lists.denx.de/pipermail/u-boot/2019-July/379103.html
> [3] https://lists.denx.de/pipermail/u-boot/2019-September/383412.html
> [4] https://community.nxp.com/message/1138659
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
> ---
>
> configs/colibri_imx7_defconfig | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
> index 29ddd7d3e9..7a4caca977 100644
> --- a/configs/colibri_imx7_defconfig
> +++ b/configs/colibri_imx7_defconfig
> @@ -8,8 +8,6 @@ CONFIG_ENV_OFFSET=0x380000
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_IMX_RDC=y
> CONFIG_IMX_BOOTAUX=y
> -CONFIG_IMX_HAB=y
> -# CONFIG_CMD_DEKBLOB is not set
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
> CONFIG_BOOTDELAY=1
> @@ -39,7 +37,6 @@ CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_BOOTP_PXE is not set
> CONFIG_CMD_BMP=y
> CONFIG_CMD_CACHE=y
> -# CONFIG_CMD_HASH is not set
> CONFIG_CMD_MTDPARTS=y
> CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
> CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx7-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
> @@ -52,7 +49,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> CONFIG_IP_DEFRAG=y
> CONFIG_TFTP_BLOCKSIZE=16352
> -CONFIG_FSL_CAAM=y
> CONFIG_DFU_NAND=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_I2C=y
> @@ -84,5 +80,6 @@ CONFIG_DM_VIDEO=y
> CONFIG_VIDEO_BPP8=y
> CONFIG_VIDEO_BPP16=y
> CONFIG_VIDEO_BPP32=y
> +CONFIG_SHA_HW_ACCEL=y
> CONFIG_OF_LIBFDT_OVERLAY=y
> CONFIG_FDT_FIXUP_PARTITIONS=y
> --
> 2.17.1
>
--
Best regards
Oleksandr Suvorov
cryosay at gmail.com
More information about the U-Boot
mailing list