[PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver

Lukasz Majewski lukma at denx.de
Sun Dec 8 15:40:03 CET 2019


On Wed,  4 Dec 2019 18:44:30 +0100
Giulio Benetti <giulio.benetti at benettiengineering.com> wrote:

> Add i.MXRT1050 clk driver support.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
> ---
>  drivers/clk/imx/Kconfig                     |  16 ++
>  drivers/clk/imx/Makefile                    |   2 +
>  drivers/clk/imx/clk-imxrt1050.c             | 292
> ++++++++++++++++++++ include/dt-bindings/clock/imxrt1050-clock.h |
> 65 +++++ 4 files changed, 375 insertions(+)
>  create mode 100644 drivers/clk/imx/clk-imxrt1050.c
>  create mode 100644 include/dt-bindings/clock/imxrt1050-clock.h
> 
> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> index 0ba8bc9f63..d5738b5211 100644
> --- a/drivers/clk/imx/Kconfig
> +++ b/drivers/clk/imx/Kconfig
> @@ -52,3 +52,19 @@ config CLK_IMX8MN
>  	select CLK_CCF
>  	help
>  	  This enables support clock driver for i.MX8MN platforms.
> +
> +config SPL_CLK_IMXRT1050
> +	bool "SPL clock support for i.MXRT1050"
> +	depends on ARCH_IMXRT && SPL
> +	select SPL_CLK
> +	select SPL_CLK_CCF
> +	help
> +	  This enables SPL DM/DTS support for clock driver in
> i.MXRT1050 +
> +config CLK_IMXRT1050
> +	bool "Clock support for i.MXRT1050"
> +	depends on ARCH_IMXRT
> +	select CLK
> +	select CLK_CCF
> +	help
> +	  This enables support clock driver for i.MXRT1050 platforms.
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
> index 222c5a4e08..166cb7bb44 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -14,3 +14,5 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MM) += clk-imx8mm.o
> clk-pll14xx.o \ clk-composite-8m.o
>  obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \
>  				clk-composite-8m.o
> +
> +obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o
> diff --git a/drivers/clk/imx/clk-imxrt1050.c
> b/drivers/clk/imx/clk-imxrt1050.c new file mode 100644
> index 0000000000..44ca52c013
> --- /dev/null
> +++ b/drivers/clk/imx/clk-imxrt1050.c
> @@ -0,0 +1,292 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright(C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/imx-regs.h>
> +#include <dt-bindings/clock/imxrt1050-clock.h>
> +
> +#include "clk.h"
> +
> +static ulong imxrt1050_clk_get_rate(struct clk *clk)
> +{
> +	struct clk *c;
> +	int ret;
> +
> +	debug("%s(#%lu)\n", __func__, clk->id);
> +
> +	ret = clk_get_by_id(clk->id, &c);
> +	if (ret)
> +		return ret;
> +
> +	return clk_get_rate(c);
> +}
> +
> +static ulong imxrt1050_clk_set_rate(struct clk *clk, ulong rate)
> +{
> +	struct clk *c;
> +	int ret;
> +
> +	debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
> +
> +	ret = clk_get_by_id(clk->id, &c);
> +	if (ret)
> +		return ret;
> +
> +	return clk_set_rate(c, rate);
> +}
> +
> +static int __imxrt1050_clk_enable(struct clk *clk, bool enable)
> +{
> +	struct clk *c;
> +	int ret;
> +
> +	debug("%s(#%lu) en: %d\n", __func__, clk->id, enable);
> +
> +	ret = clk_get_by_id(clk->id, &c);
> +	if (ret)
> +		return ret;
> +
> +	if (enable)
> +		ret = clk_enable(c);
> +	else
> +		ret = clk_disable(c);
> +
> +	return ret;
> +}
> +
> +static int imxrt1050_clk_disable(struct clk *clk)
> +{
> +	return __imxrt1050_clk_enable(clk, 0);
> +}
> +
> +static int imxrt1050_clk_enable(struct clk *clk)
> +{
> +	return __imxrt1050_clk_enable(clk, 1);
> +}
> +
> +static struct clk_ops imxrt1050_clk_ops = {
> +	.set_rate = imxrt1050_clk_set_rate,
> +	.get_rate = imxrt1050_clk_get_rate,
> +	.enable = imxrt1050_clk_enable,
> +	.disable = imxrt1050_clk_disable,
> +};
> +
> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
> +static const char * const pll1_bypass_sels[] = {"pll1_arm",
> "pll1_arm_ref_sel", }; +static const char * const pll2_bypass_sels[]
> = {"pll2_sys", "pll2_sys_ref_sel", }; +static const char * const
> pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
> +static const char * const pll5_bypass_sels[] = {"pll5_video",
> "pll5_video_ref_sel", }; + +static const char *const
> pre_periph_sels[] = { "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m",
> "arm_podf", }; +static const char *const periph_sels[] = {
> "pre_periph_sel", "todo", }; +static const char *const usdhc_sels[] =
> { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *const
> lpuart_sels[] = { "pll3_80m", "osc", }; +static const char *const
> semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; +static
> const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
> +static const char *const lcdif_sels[] = { "pll2_sys",
> "pll3_pfd3_454_74m", "pll5_video:", "pll2_pfd0_352m",
> "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; + +static int
> imxrt1050_clk_probe(struct udevice *dev) +{
> +	void *base;
> +
> +	/* Anatop clocks */
> +	base = (void *)ANATOP_BASE_ADDR;
> +
> +	clk_dm(IMXRT1050_CLK_PLL1_REF_SEL,
> +	       imx_clk_mux("pll1_arm_ref_sel", base + 0x0, 14, 2,
> +			   pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> +	clk_dm(IMXRT1050_CLK_PLL2_REF_SEL,
> +	       imx_clk_mux("pll2_sys_ref_sel", base + 0x30, 14, 2,
> +			   pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> +	clk_dm(IMXRT1050_CLK_PLL3_REF_SEL,
> +	       imx_clk_mux("pll3_usb_otg_ref_sel", base + 0x10, 14,
> 2,
> +			   pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> +	clk_dm(IMXRT1050_CLK_PLL5_REF_SEL,
> +	       imx_clk_mux("pll5_video_ref_sel", base + 0xa0, 14, 2,
> +			   pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> +
> +	clk_dm(IMXRT1050_CLK_PLL1_ARM,
> +	       imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm",
> "pll1_arm_ref_sel",
> +			     base + 0x0, 0x7f));
> +	clk_dm(IMXRT1050_CLK_PLL2_SYS,
> +	       imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
> "pll2_sys_ref_sel",
> +			     base + 0x30, 0x1));
> +	clk_dm(IMXRT1050_CLK_PLL3_USB_OTG,
> +	       imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
> +			     "pll3_usb_otg_ref_sel",
> +			     base + 0x10, 0x1));
> +	clk_dm(IMXRT1050_CLK_PLL5_VIDEO,
> +	       imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video",
> "pll5_video_ref_sel",
> +			     base + 0xa0, 0x7f));
> +
> +	/* PLL bypass out */
> +	clk_dm(IMXRT1050_CLK_PLL1_BYPASS,
> +	       imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1,
> +				 pll1_bypass_sels,
> +				 ARRAY_SIZE(pll1_bypass_sels),
> +				 CLK_SET_RATE_PARENT));
> +	clk_dm(IMXRT1050_CLK_PLL2_BYPASS,
> +	       imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1,
> +				 pll2_bypass_sels,
> +				 ARRAY_SIZE(pll2_bypass_sels),
> +				 CLK_SET_RATE_PARENT));
> +	clk_dm(IMXRT1050_CLK_PLL3_BYPASS,
> +	       imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1,
> +				 pll3_bypass_sels,
> +				 ARRAY_SIZE(pll3_bypass_sels),
> +				 CLK_SET_RATE_PARENT));
> +	clk_dm(IMXRT1050_CLK_PLL5_BYPASS,
> +	       imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
> +				 pll5_bypass_sels,
> +				 ARRAY_SIZE(pll5_bypass_sels),
> +				 CLK_SET_RATE_PARENT));
> +
> +	clk_dm(IMXRT1050_CLK_VIDEO_POST_DIV_SEL,
> +	       imx_clk_divider("video_post_div_sel", "pll5_video",
> +			       base + 0xa0, 19, 2));
> +	clk_dm(IMXRT1050_CLK_VIDEO_DIV,
> +	       imx_clk_divider("video_div", "video_post_div_sel",
> +			       base + 0x170, 30, 2));
> +
> +	clk_dm(IMXRT1050_CLK_PLL3_80M,
> +	       imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",
> 1, 6)); +
> +	clk_dm(IMXRT1050_CLK_PLL2_PFD0_352M,
> +	       imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base +
> 0x100, 0));
> +	clk_dm(IMXRT1050_CLK_PLL2_PFD1_594M,
> +	       imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base +
> 0x100, 1));
> +	clk_dm(IMXRT1050_CLK_PLL2_PFD2_396M,
> +	       imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base +
> 0x100, 2));
> +	clk_dm(IMXRT1050_CLK_PLL3_PFD1_664_62M,
> +	       imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base
> + 0xf0,
> +			   1));
> +	clk_dm(IMXRT1050_CLK_PLL3_PFD3_454_74M,
> +	       imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base
> + 0xf0,
> +			   3));
> +
> +	/* CCM clocks */
> +	base = dev_read_addr_ptr(dev);
> +	if (base == (void *)FDT_ADDR_T_NONE)
> +		return -EINVAL;
> +
> +	clk_dm(IMXRT1050_CLK_ARM_PODF,
> +	       imx_clk_divider("arm_podf", "pll1_arm",
> +			       base + 0x10, 0, 3));
> +
> +	clk_dm(IMXRT1050_CLK_PRE_PERIPH_SEL,
> +	       imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2,
> +			   pre_periph_sels,
> ARRAY_SIZE(pre_periph_sels)));
> +	clk_dm(IMXRT1050_CLK_PERIPH_SEL,
> +	       imx_clk_mux("periph_sel", base + 0x14, 25, 1,
> +			   periph_sels, ARRAY_SIZE(periph_sels)));
> +	clk_dm(IMXRT1050_CLK_USDHC1_SEL,
> +	       imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1,
> +			   usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> +	clk_dm(IMXRT1050_CLK_USDHC2_SEL,
> +	       imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1,
> +			   usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> +	clk_dm(IMXRT1050_CLK_LPUART_SEL,
> +	       imx_clk_mux("lpuart_sel", base + 0x24, 6, 1,
> +			   lpuart_sels, ARRAY_SIZE(lpuart_sels)));
> +	clk_dm(IMXRT1050_CLK_SEMC_ALT_SEL,
> +	       imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1,
> +			   semc_alt_sels,
> ARRAY_SIZE(semc_alt_sels)));
> +	clk_dm(IMXRT1050_CLK_SEMC_SEL,
> +	       imx_clk_mux("semc_sel", base + 0x14, 6, 1,
> +			   semc_sels, ARRAY_SIZE(semc_sels)));
> +	clk_dm(IMXRT1050_CLK_LCDIF_SEL,
> +	       imx_clk_mux("lcdif_sel", base + 0x38, 15, 3,
> +			   lcdif_sels, ARRAY_SIZE(lcdif_sels)));
> +
> +	clk_dm(IMXRT1050_CLK_AHB_PODF,
> +	       imx_clk_divider("ahb_podf", "periph_sel",
> +			       base + 0x14, 10, 3));
> +	clk_dm(IMXRT1050_CLK_USDHC1_PODF,
> +	       imx_clk_divider("usdhc1_podf", "usdhc1_sel",
> +			       base + 0x24, 11, 3));
> +	clk_dm(IMXRT1050_CLK_USDHC2_PODF,
> +	       imx_clk_divider("usdhc2_podf", "usdhc2_sel",
> +			       base + 0x24, 16, 3));
> +	clk_dm(IMXRT1050_CLK_LPUART_PODF,
> +	       imx_clk_divider("lpuart_podf", "lpuart_sel",
> +			       base + 0x24, 0, 6));
> +	clk_dm(IMXRT1050_CLK_SEMC_PODF,
> +	       imx_clk_divider("semc_podf", "semc_sel",
> +			       base + 0x14, 16, 3));
> +	clk_dm(IMXRT1050_CLK_LCDIF_PRED,
> +	       imx_clk_divider("lcdif_pred", "lcdif_sel",
> +			       base + 0x38, 12, 3));
> +	clk_dm(IMXRT1050_CLK_LCDIF_PODF,
> +	       imx_clk_divider("lcdif_podf", "lcdif_pred",
> +			       base + 0x18, 23, 3));
> +
> +	clk_dm(IMXRT1050_CLK_USDHC1,
> +	       imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80,
> 2));
> +	clk_dm(IMXRT1050_CLK_USDHC2,
> +	       imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80,
> 4));
> +	clk_dm(IMXRT1050_CLK_LPUART1,
> +	       imx_clk_gate2("lpuart1", "lpuart_podf", base + 0x7c,
> 24));
> +	clk_dm(IMXRT1050_CLK_SEMC,
> +	       imx_clk_gate2("semc", "semc_podf", base + 0x74, 4));
> +	clk_dm(IMXRT1050_CLK_LCDIF,
> +	       imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70,
> 28)); +
> +#ifdef CONFIG_SPL_BUILD
> +	struct clk *clk, *clk1;
> +
> +	/* bypass pll1 before setting its rate */
> +	clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
> +	clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> +	clk_set_parent(clk1, clk);
> +
> +	clk_get_by_id(IMXRT1050_CLK_PLL1_ARM, &clk);
> +	clk_enable(clk);
> +	clk_set_rate(clk, 1056000000UL);
> +
> +	clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> +	clk_set_parent(clk1, clk);
> +
> +	clk_get_by_id(IMXRT1050_CLK_SEMC_SEL, &clk1);
> +	clk_get_by_id(IMXRT1050_CLK_SEMC_ALT_SEL, &clk);
> +	clk_set_parent(clk1, clk);
> +
> +	clk_get_by_id(IMXRT1050_CLK_PLL2_SYS, &clk);
> +	clk_enable(clk);
> +	clk_set_rate(clk, 528000000UL);
> +
> +	clk_get_by_id(IMXRT1050_CLK_PLL2_BYPASS, &clk1);
> +	clk_set_parent(clk1, clk);
> +
> +	/* Configure PLL3_USB_OTG to 480MHz */
> +	clk_get_by_id(IMXRT1050_CLK_PLL3_USB_OTG, &clk);
> +	clk_enable(clk);
> +	clk_set_rate(clk, 480000000UL);
> +
> +	clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1);
> +	clk_set_parent(clk1, clk);
> +
> +#endif
> +
> +	return 0;
> +}
> +
> +static const struct udevice_id imxrt1050_clk_ids[] = {
> +	{ .compatible = "fsl,imxrt1050-ccm" },
> +	{ },
> +};
> +
> +U_BOOT_DRIVER(imxrt1050_clk) = {
> +	.name = "clk_imxrt1050",
> +	.id = UCLASS_CLK,
> +	.of_match = imxrt1050_clk_ids,
> +	.ops = &imxrt1050_clk_ops,
> +	.probe = imxrt1050_clk_probe,
> +	.flags = DM_FLAG_PRE_RELOC,
> +};
> diff --git a/include/dt-bindings/clock/imxrt1050-clock.h
> b/include/dt-bindings/clock/imxrt1050-clock.h new file mode 100644
> index 0000000000..9f7f9be59f
> --- /dev/null
> +++ b/include/dt-bindings/clock/imxrt1050-clock.h
> @@ -0,0 +1,65 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright(C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_IMXRT1050_H
> +#define __DT_BINDINGS_CLOCK_IMXRT1050_H
> +
> +#define IMXRT1050_CLK_DUMMY			0
> +#define IMXRT1050_CLK_CKIL			1
> +#define IMXRT1050_CLK_CKIH			2
> +#define IMXRT1050_CLK_OSC			3
> +#define IMXRT1050_CLK_PLL2_PFD0_352M		4
> +#define IMXRT1050_CLK_PLL2_PFD1_594M		5
> +#define IMXRT1050_CLK_PLL2_PFD2_396M		6
> +#define IMXRT1050_CLK_PLL3_PFD0_720M		7
> +#define IMXRT1050_CLK_PLL3_PFD1_664_62M		8
> +#define IMXRT1050_CLK_PLL3_PFD2_508_24M		9
> +#define IMXRT1050_CLK_PLL3_PFD3_454_74M		10
> +#define IMXRT1050_CLK_PLL2_198M			11
> +#define IMXRT1050_CLK_PLL3_120M			12
> +#define IMXRT1050_CLK_PLL3_80M			13
> +#define IMXRT1050_CLK_PLL3_60M			14
> +#define IMXRT1050_CLK_PLL1_BYPASS		15
> +#define IMXRT1050_CLK_PLL2_BYPASS		16
> +#define IMXRT1050_CLK_PLL3_BYPASS		17
> +#define IMXRT1050_CLK_PLL5_BYPASS		19
> +#define IMXRT1050_CLK_PLL1_REF_SEL		30
> +#define IMXRT1050_CLK_PLL2_REF_SEL		31
> +#define IMXRT1050_CLK_PLL3_REF_SEL		32
> +#define IMXRT1050_CLK_PLL5_REF_SEL		34
> +#define IMXRT1050_CLK_PRE_PERIPH_SEL		44
> +#define IMXRT1050_CLK_PERIPH_SEL		45
> +#define IMXRT1050_CLK_SEMC_ALT_SEL		46
> +#define IMXRT1050_CLK_SEMC_SEL			47
> +#define IMXRT1050_CLK_USDHC1_SEL		48
> +#define IMXRT1050_CLK_USDHC2_SEL		49
> +#define IMXRT1050_CLK_LPUART_SEL		50
> +#define IMXRT1050_CLK_LCDIF_SEL			51
> +#define IMXRT1050_CLK_VIDEO_POST_DIV_SEL	52
> +#define IMXRT1050_CLK_VIDEO_DIV			53
> +#define IMXRT1050_CLK_ARM_PODF			90
> +#define IMXRT1050_CLK_LPUART_PODF		91
> +#define IMXRT1050_CLK_USDHC1_PODF		92
> +#define IMXRT1050_CLK_USDHC2_PODF		93
> +#define IMXRT1050_CLK_SEMC_PODF			94
> +#define IMXRT1050_CLK_AHB_PODF			95
> +#define IMXRT1050_CLK_LCDIF_PRED		96
> +#define IMXRT1050_CLK_LCDIF_PODF		97
> +#define IMXRT1050_CLK_USDHC1			163
> +#define IMXRT1050_CLK_USDHC2			164
> +#define IMXRT1050_CLK_LPUART1			165
> +#define IMXRT1050_CLK_SEMC			166
> +#define IMXRT1050_CLK_LCDIF			167
> +#define IMXRT1050_CLK_PLL1_ARM			170
> +#define IMXRT1050_CLK_PLL2_SYS			171
> +#define IMXRT1050_CLK_PLL3_USB_OTG		172
> +#define IMXRT1050_CLK_PLL4_AUDIO		173
> +#define IMXRT1050_CLK_PLL5_VIDEO		174
> +#define IMXRT1050_CLK_PLL6_ENET			176
> +#define IMXRT1050_CLK_PLL7_USB_HOST		177
> +#define IMXRT1050_CLK_END			266
> +
> +#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */

Was this driver ported from Linux kernel? If yes - please add exact
SHA1 and branch from which it was copied. This information shall be
provided in the commit message.

And thanks for providing this code to U-Boot :-)


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191208/be32819d/attachment.sig>


More information about the U-Boot mailing list