[PATCH 3/3] cmd: sata: Add block unbind device function

[Peng Ma]

If we didn't unbind the sata from block device, the same devices would
be added after sata remove,
This patch is to resolve this issue as below:

=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
=> sata stop
=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 2: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 3: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)

Signed-off-by: Peng Ma <peng.ma at nxp.com>
---
 cmd/sata.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/cmd/sata.c b/cmd/sata.c
index a73cc54bd3..6bdb516cb5 100644
--- a/cmd/sata.c
+++ b/cmd/sata.c
@@ -26,6 +26,8 @@ int sata_remove(int devnum)
 	struct udevice *dev;
 	int rc;
 
+	blk_unbind_all(IF_TYPE_SATA);
+
 	rc = uclass_find_device(UCLASS_AHCI, devnum, &dev);
 	if (!rc && !dev)
 		rc = uclass_find_first_device(UCLASS_AHCI, &dev);
-- 
2.17.1