[PATCH] imx8mq_evk: Update the required ATF branch

[Peng Fan]

> Subject: [PATCH] imx8mq_evk: Update the required ATF branch
> 
> Following the README instructions leads to a non-booting
> U-Boot:
> 
> U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300)
> PMIC:  PFUZE100 ID=0x10
> DDRINFO: start DRAM init
> DDRINFO:ddrphy calibration done
> DDRINFO: ddrmix config done
> Normal Boot
> Trying to boot from MMC2
> 
> (It hangs here)
> 
> Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem
> and allow the boot to complete again.
> 
> Suggested-by: Adam Ford <aford173 at gmail.com>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Acked-by: Peng Fan <peng.fan at nxp.com>

> ---
>  board/freescale/imx8mq_evk/README | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/imx8mq_evk/README
> b/board/freescale/imx8mq_evk/README
> index c1d400bcf9..4f671b069c 100644
> --- a/board/freescale/imx8mq_evk/README
> +++ b/board/freescale/imx8mq_evk/README
> @@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware
> ======================================
>  Note: srctree is U-Boot source directory  Get ATF from:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource
> .codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&data=02%7C01%7Cpen
> g.fan%40nxp.com%7C15caa498b49343fabede08d77e40facf%7C686ea1d3bc
> 2b4c6fa92cd99c5c301635%7C0%7C0%7C637116689861712196&sdata
> =GNw4g1oDo9ceM1VIEB9A11716fQQF1GNzpJ4L3n8FTM%3D&reserved
> =0
> -branch: imx_4.14.62_1.0.0_beta
> +branch: imx_4.19.35_1.0.0
>  $ make PLAT=imx8mq bl31
>  $ cp build/imx8mq/release/bl31.bin $(srctree)
> 
> --
> 2.17.1