i.MX8MM-EVK Boot failure

[Fabio Estevam]

Hi Peng,

On Wed, Dec 11, 2019 at 12:05 AM Peng Fan <peng.fan at nxp.com> wrote:

> > Does it work if you follow the README steps?
>
> I not download that, just use my local ATF/DDR,

Yes, this is what I suspected: the ATF/DDR firmware versions from the
README are not working with mainline U-Boot.

Could you please update the README to point to the correct versions, please?

Otherwise nobody will be able to run U-Boot mainline on i.MX8MM/i.MX8MQ.

Thanks