[v3 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN

Biwen Li biwen.li at nxp.com
Thu Dec 5 07:10:30 CET 2019


The default value of CONFIG_SYS_MALLOC_F_LEN (0x400)
leaves U-Boot with not enough memory to load i2c driver
before relocate, causing it to hang.

Change the default value of CONFIG_SYS_MALLOC_F_LEN
for below SoCs,
- LS1012A
- LS1021A
- LS1043A
- LS1046A

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
Changes in v3:
	- update commit messages

Changes in v2:
	- none

 Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Kconfig b/Kconfig
index e22417ec44..3e6d9f26ea 100644
--- a/Kconfig
+++ b/Kconfig
@@ -146,7 +146,9 @@ config SYS_MALLOC_F_LEN
 	default 0x1000 if AM33XX
 	default 0x2800 if SANDBOX
 	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
-			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
+			   ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
+			   ARCH_LS1046A)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
-- 
2.17.1



More information about the U-Boot mailing list