[PATCH 1/4] ppc/km/tegr1: support second localbus clock signal

[Priyanka Jain]

>-----Original Message-----
>From: Holger Brunck <holger.brunck at ch.abb.com>
>Sent: Tuesday, November 26, 2019 11:39 PM
>To: u-boot at lists.denx.de
>Cc: Holger Brunck <holger.brunck at ch.abb.com>; Priyanka Jain
><priyanka.jain at nxp.com>; Valentin Longchamp
><valentin.longchamp at ch.abb.com>
>Subject: [PATCH 1/4] ppc/km/tegr1: support second localbus clock signal
>
>On kmtegr1 we have to specify the second localbus clock signal also instead of
>using the default for our ppc 8309 boards.
>
>Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
>CC: Priyanka Jain <priyanka.jain at nxp.com>
>CC: Valentin Longchamp <valentin.longchamp at ch.abb.com>
>---
> include/configs/km/km-mpc8309.h |  2 ++
> include/configs/kmtegr1.h       | 17 +++++++++++++++++
> 2 files changed, 19 insertions(+)
>
>diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-
>mpc8309.h index 9aaea273e0..e710c04493 100644
>--- a/include/configs/km/km-mpc8309.h
>+++ b/include/configs/km/km-mpc8309.h
>@@ -22,6 +22,7 @@
>  * System IO Config
>  */
> /* 0x14000180 SICR_1 */
>+#ifndef CONFIG_SYS_SICRL
> #define CONFIG_SYS_SICRL (0			\
> 		| SICR_1_UART1_UART1RTS		\
> 		| SICR_1_I2C_CKSTOP		\
>@@ -38,6 +39,7 @@
> 		| SICR_1_FEC1_FEC1		\
> 		| SICR_1_FEC2_FEC2		\
> 		)
>+#endif
>
> /* 0x00080400 SICR_2 */
> #define CONFIG_SYS_SICRH (0			\
>diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index
>e627606222..a441fca121 100644
>--- a/include/configs/kmtegr1.h
>+++ b/include/configs/kmtegr1.h
>@@ -30,6 +30,23 @@
> #define CONFIG_SYS_MAX_NAND_DEVICE		1
> #define NAND_MAX_CHIPS				1
>
>+#define CONFIG_SYS_SICRL (0     \
>+		| SICR_1_UART1_UART1RTS   \
>+		| SICR_1_I2C_CKSTOP   \
>+		| SICR_1_IRQ_A_IRQ    \
>+		| SICR_1_IRQ_B_IRQ    \
>+		| SICR_1_GPIO_A_GPIO    \
>+		| SICR_1_GPIO_B_GPIO    \
>+		| SICR_1_GPIO_C_GPIO    \
>+		| SICR_1_GPIO_D_GPIO    \
>+		| SICR_1_GPIO_E_LCS    \
>+		| SICR_1_GPIO_F_GPIO    \
>+		| SICR_1_USB_A_UART2S   \
>+		| SICR_1_USB_B_UART2RTS   \
>+		| SICR_1_FEC1_FEC1    \
>+		| SICR_1_FEC2_FEC2    \
>+	)
>+
> /* include common defines/options for all Keymile boards */  #include
>"km/keymile-common.h"
> #include "km/km-powerpc.h"
>--
>2.24.0.rc1
Series applied on u-boot-mpc85xx. Awaiting upstream
Thanks
Priyanka