[v7 1/8] rtc: pcf8563: Add driver model support

Biwen Li biwen.li at nxp.com
Tue Dec 24 07:09:03 CET 2019


> >Subject: [v7 1/8] rtc: pcf8563: Add driver model support
> >
> >Add support of driver model of pcf8563
> >
> >Signed-off-by: Biwen Li <biwen.li at nxp.com>
> >---
> >Changes in v7:
> >	- remove copyright
> >
> >Changes in v6:
> >	- none
> >
> >Changes in v5:
> >	- none
> >
> >Changes in v4:
> >	- update commit messages
> >	- update copyright
> >
> >Changes in v3:
> >	- update commit messages
> >
> >Changes in v2:
> >	- none
> >
> > drivers/rtc/pcf8563.c | 107
> ++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 107 insertions(+)
> >
> >diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c index
> >a839d6cc98..44204e133e 100644
> >--- a/drivers/rtc/pcf8563.c
> >+++ b/drivers/rtc/pcf8563.c
> >@@ -12,9 +12,11 @@
> >
> > #include <common.h>
> > #include <command.h>
> >+#include <dm.h>
> > #include <rtc.h>
> > #include <i2c.h>
> >
> >+#if !CONFIG_IS_ENABLED(DM_RTC)
> > static uchar rtc_read  (uchar reg);
> > static void  rtc_write (uchar reg, uchar val);
> >
> >@@ -115,3 +117,108 @@ static void rtc_write (uchar reg, uchar val)  {
> > 	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);  }
> >+#else
> >+static int pcf8563_rtc_get(struct udevice *dev, struct rtc_time *tmp) {
> >+	int rel = 0;
> >+	uchar sec, min, hour, mday, wday, mon_cent, year;
> >+
> >+	sec	= dm_i2c_reg_read(dev, 0x02);
> >+	min	= dm_i2c_reg_read(dev, 0x03);
> >+	hour	= dm_i2c_reg_read(dev, 0x04);
> >+	mday	= dm_i2c_reg_read(dev, 0x05);
> >+	wday	= dm_i2c_reg_read(dev, 0x06);
> >+	mon_cent = dm_i2c_reg_read(dev, 0x07);
> >+	year	= dm_i2c_reg_read(dev, 0x08);
> >+
> >+	debug ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x
> >"
> >+	       "hr: %02x min: %02x sec: %02x\n",
> >+	       year, mon_cent, mday, wday,
> >+	       hour, min, sec);
> >+	debug ("Alarms: wday: %02x day: %02x hour: %02x min: %02x\n",
> >+	       dm_i2c_reg_read(dev, 0x0C),
> >+	       dm_i2c_reg_read(dev, 0x0B),
> >+	       dm_i2c_reg_read(dev, 0x0A),
> >+	       dm_i2c_reg_read(dev, 0x09));
> >+
> >+	if (sec & 0x80) {
> >+		puts ("### Warning: RTC Low Voltage - date/time not
> >reliable\n");
> >+		rel = -1;
> >+	}
> >+
> >+	tmp->tm_sec = bcd2bin (sec & 0x7F);
> >+	tmp->tm_min = bcd2bin (min & 0x7F);
> >+	tmp->tm_hour = bcd2bin (hour & 0x3F);
> >+	tmp->tm_mday = bcd2bin (mday & 0x3F);
> >+	tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
> >+	tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 1900 : 2000);
> >+	tmp->tm_wday = bcd2bin (wday & 0x07);
> >+	tmp->tm_yday = 0;
> >+	tmp->tm_isdst = 0;
> >+
> >+	debug ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME:
> >%2d:%02d:%02d\n",
> >+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
> >+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
> >+
> >+	return rel;
> >+}
> >+
> >+static int pcf8563_rtc_set(struct udevice *dev, const struct rtc_time
> >+*tmp) {
> >+	uchar century;
> >+
> >+	debug ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME:
> >%2d:%02d:%02d\n",
> >+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
> >+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
> >+
> >+	dm_i2c_reg_write(dev, 0x08, bin2bcd(tmp->tm_year % 100));
> >+
> >+	century = (tmp->tm_year >= 2000) ? 0 : 0x80;
> >+	dm_i2c_reg_write(dev, 0x07, bin2bcd(tmp->tm_mon) | century);
> >+
> >+	dm_i2c_reg_write(dev, 0x06, bin2bcd(tmp->tm_wday));
> >+	dm_i2c_reg_write(dev, 0x05, bin2bcd(tmp->tm_mday));
> >+	dm_i2c_reg_write(dev, 0x04, bin2bcd(tmp->tm_hour));
> >+	dm_i2c_reg_write(dev, 0x03, bin2bcd(tmp->tm_min));
> >+	dm_i2c_reg_write(dev, 0x02, bin2bcd(tmp->tm_sec));
> >+
> >+	return 0;
> >+}
> >+
> >+static int pcf8563_rtc_reset(struct udevice *dev) {
> >+	/* clear all control & status registers */
> >+	dm_i2c_reg_write(dev, 0x00, 0x00);
> >+	dm_i2c_reg_write(dev, 0x01, 0x00);
> >+	dm_i2c_reg_write(dev, 0x0D, 0x00);
> >+
> >+	/* clear Voltage Low bit */
> >+	dm_i2c_reg_write(dev, 0x02, dm_i2c_reg_read (dev, 0x02) & 0x7F);
> >+
> >+	/* reset all alarms */
> >+	dm_i2c_reg_write(dev, 0x09, 0x00);
> >+	dm_i2c_reg_write(dev, 0x0A, 0x00);
> >+	dm_i2c_reg_write(dev, 0x0B, 0x00);
> >+	dm_i2c_reg_write(dev, 0x0C, 0x00);
> >+
> >+	return 0;
> >+}
> >+
> >+static const struct rtc_ops pcf8563_rtc_ops = {
> >+	.get = pcf8563_rtc_get,
> >+	.set = pcf8563_rtc_set,
> >+	.reset = pcf8563_rtc_reset,
> >+};
> >+
> >+static const struct udevice_id pcf8563_rtc_ids[] = {
> >+	{ .compatible = "nxp,pcf8563" },
> >+	{ }
> >+};
> >+
> >+U_BOOT_DRIVER(rtc_pcf8563) = {
> >+	.name   = "rtc-pcf8563",
> >+	.id     = UCLASS_RTC,
> >+	.of_match = pcf8563_rtc_ids,
> >+	.ops    = &pcf8563_rtc_ops,
> >+};
> >+#endif
> >--
> >2.17.1
> Biwen,
> Adding/updating copyright depends on the contribution that you are making to
> particular file.
> NXP policy is in-lined with open-source policy which also suggest to add/update
> copyright when you are making significant changes.
> In review, Fabio has raised concern over copyright addition in case of one line
> addition.
> But he has not suggested to remove all copyright changes.
Oh, get it, I will resend the v7
> 
> Thanks
> Priyanka


More information about the U-Boot mailing list