[PATCH v7 13/17] x86: apl: Add P2SB driver
Simon Glass
sjg at chromium.org
Mon Dec 9 01:40:16 CET 2019
Adds a driver for the Apollo Lake Primary-to-sideband bus. This supports
various child devices. It supposed both device tree and of-platdata.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v7:
- Update comment in apl_p2sb_early_init()
Changes in v6: None
Changes in v5: None
Changes in v4:
- Detect zero mmio address
- Use BIT() macro bit more
- apollolake -> Apollo Lake
Changes in v3:
- Use pci_get_devfn()
Changes in v2: None
arch/x86/cpu/apollolake/Makefile | 1 +
arch/x86/cpu/apollolake/p2sb.c | 166 +++++++++++++++++++++++++++++++
2 files changed, 167 insertions(+)
create mode 100644 arch/x86/cpu/apollolake/p2sb.c
diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile
index edde122f75..dc6df15dab 100644
--- a/arch/x86/cpu/apollolake/Makefile
+++ b/arch/x86/cpu/apollolake/Makefile
@@ -15,6 +15,7 @@ endif
obj-y += hostbridge.o
obj-y += itss.o
obj-y += lpc.o
+obj-y += p2sb.o
obj-y += pch.o
obj-y += pmc.o
obj-y += uart.o
diff --git a/arch/x86/cpu/apollolake/p2sb.c b/arch/x86/cpu/apollolake/p2sb.c
new file mode 100644
index 0000000000..eb27861b7a
--- /dev/null
+++ b/arch/x86/cpu/apollolake/p2sb.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Primary-to-Sideband Bridge
+ *
+ * Copyright 2019 Google LLC
+ */
+
+#define LOG_CATEGORY UCLASS_P2SB
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <p2sb.h>
+#include <spl.h>
+#include <asm/pci.h>
+
+struct p2sb_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_intel_apl_p2sb dtplat;
+#endif
+ ulong mmio_base;
+ pci_dev_t bdf;
+};
+
+/* PCI config space registers */
+#define HPTC_OFFSET 0x60
+#define HPTC_ADDR_ENABLE_BIT BIT(7)
+
+/* High Performance Event Timer Configuration */
+#define P2SB_HPTC 0x60
+#define P2SB_HPTC_ADDRESS_ENABLE BIT(7)
+
+/*
+ * ADDRESS_SELECT ENCODING_RANGE
+ * 0 0xfed0 0000 - 0xfed0 03ff
+ * 1 0xfed0 1000 - 0xfed0 13ff
+ * 2 0xfed0 2000 - 0xfed0 23ff
+ * 3 0xfed0 3000 - 0xfed0 33ff
+ */
+#define P2SB_HPTC_ADDRESS_SELECT_0 (0 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_1 (1 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_2 (2 << 0)
+#define P2SB_HPTC_ADDRESS_SELECT_3 (3 << 0)
+
+/*
+ * apl_p2sb_early_init() - Enable decoding for HPET range
+ *
+ * This is needed by FSP-M which uses the High Precision Event Timer.
+ *
+ * @dev: P2SB device
+ * @return 0 if OK, -ve on error
+ */
+static int apl_p2sb_early_init(struct udevice *dev)
+{
+ struct p2sb_platdata *plat = dev_get_platdata(dev);
+ pci_dev_t pdev = plat->bdf;
+
+ /*
+ * Enable decoding for HPET memory address range.
+ * HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode
+ * the High Performance Timer memory address range
+ * selected by bits 1:0
+ */
+ pci_x86_write_config(pdev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT,
+ PCI_SIZE_8);
+
+ /* Enable PCR Base address in PCH */
+ pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, plat->mmio_base,
+ PCI_SIZE_32);
+ pci_x86_write_config(pdev, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
+
+ /* Enable P2SB MSE */
+ pci_x86_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY, PCI_SIZE_8);
+
+ return 0;
+}
+
+static int apl_p2sb_spl_init(struct udevice *dev)
+{
+ /* Enable decoding for HPET. Needed for FSP global pointer storage */
+ dm_pci_write_config(dev, P2SB_HPTC, P2SB_HPTC_ADDRESS_SELECT_0 |
+ P2SB_HPTC_ADDRESS_ENABLE, PCI_SIZE_8);
+
+ return 0;
+}
+
+int apl_p2sb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct p2sb_uc_priv *upriv = dev_get_uclass_priv(dev);
+ struct p2sb_platdata *plat = dev_get_platdata(dev);
+
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ int ret;
+
+ if (spl_phase() == PHASE_TPL) {
+ u32 base[2];
+
+ /* TPL sets up the initial BAR */
+ ret = dev_read_u32_array(dev, "early-regs", base,
+ ARRAY_SIZE(base));
+ if (ret)
+ return log_msg_ret("Missing/short early-regs", ret);
+ plat->mmio_base = base[0];
+ plat->bdf = pci_get_devfn(dev);
+ if (plat->bdf < 0)
+ return log_msg_ret("Cannot get p2sb PCI address",
+ plat->bdf);
+ } else {
+ plat->mmio_base = dev_read_addr_pci(dev);
+ /* Don't set BDF since it should not be used */
+ if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+ }
+#else
+ plat->mmio_base = plat->dtplat.early_regs[0];
+ plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]);
+#endif
+ upriv->mmio_base = plat->mmio_base;
+ debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base);
+
+ return 0;
+}
+
+static int apl_p2sb_probe(struct udevice *dev)
+{
+ if (spl_phase() == PHASE_TPL)
+ return apl_p2sb_early_init(dev);
+ else if (spl_phase() == PHASE_SPL)
+ return apl_p2sb_spl_init(dev);
+
+ return 0;
+}
+
+static int p2sb_child_post_bind(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);
+ int ret;
+ u32 pid;
+
+ ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid);
+ if (ret)
+ return ret;
+ pplat->pid = pid;
+#endif
+
+ return 0;
+}
+
+static const struct udevice_id apl_p2sb_ids[] = {
+ { .compatible = "intel,apl-p2sb" },
+ { }
+};
+
+U_BOOT_DRIVER(apl_p2sb_drv) = {
+ .name = "intel_apl_p2sb",
+ .id = UCLASS_P2SB,
+ .of_match = apl_p2sb_ids,
+ .probe = apl_p2sb_probe,
+ .ofdata_to_platdata = apl_p2sb_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct p2sb_platdata),
+ .per_child_platdata_auto_alloc_size =
+ sizeof(struct p2sb_child_platdata),
+ .child_post_bind = p2sb_child_post_bind,
+};
--
2.24.0.393.g34dc348eaf-goog
More information about the U-Boot
mailing list