[U-Boot] [uboot PATCH 1/4] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL

[Tom Rini]

On Wed, Nov 06, 2019 at 04:21:15PM +0200, Roger Quadros wrote:

> The AM572x Technical Reference Manual, SPRUHZ6H,
> Revised November 2016 [1], shows recommended settings for the
> SATA DPLL in Table 26-8. DPLL CLKDCOLDO Recommended Settings.
> 
> Use those settings in the driver. The TRM does not show
> a value for 20MHz SYS_CLK so we use something close to the
> 26MHz setting.
> 
> [1] - http://www.ti.com/lit/ug/spruhz6h/spruhz6h.pdf
> 
> Signed-off-by: Roger Quadros <rogerq at ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191226/1b954852/attachment.sig>