[PATCH 07/11] env: Enable SPI flash env for rockchip

[Kever Yang]

On 2019/12/21 下午3:54, Jagan Teki wrote:
> Most of the SPI flash devices in rockchip are 16MiB size.
>
> So, keeping U-Boot proper offset start from 128MiB with 1MiB
> size and then start env of 8KiB would be a compatible location
> between all variants of flash sizes.
>
> This patch add env start from 0x14000 with a size of 8KiB.

You can add my review tag after update this 0x140000 typo.

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>


Thanks,
- Kever
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>   env/Kconfig | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/env/Kconfig b/env/Kconfig
> index 9416a70022..1bb3e1078e 100644
> --- a/env/Kconfig
> +++ b/env/Kconfig
> @@ -489,6 +489,7 @@ config ENV_OFFSET
>   	depends on ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \
>   		    ENV_IS_IN_SPI_FLASH
>   	default 0x3f8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
> +	default 0x140000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
>   	default 0x88000 if ARCH_SUNXI
>   	default 0xE0000 if ARCH_ZYNQ
>   	default 0x1E00000 if ARCH_ZYNQMP
> @@ -512,6 +513,7 @@ config ENV_SIZE
>   	default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
>   	default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
>   	default 0x8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
> +	default 0x2000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
>   	default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL
>   	default 0x4000 if ARC
>   	default 0x1f000
> @@ -521,6 +523,7 @@ config ENV_SIZE
>   config ENV_SECT_SIZE
>   	hex "Environment Sector-Size"
>   	depends on ENV_IS_IN_FLASH || ENV_IS_IN_SPI_FLASH
> +	default 0x2000 if ARCH_ROCKCHIP
>   	default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL
>   	default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
>   	help