[PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
cristian.ciocaltea at gmail.com
Wed Dec 18 16:07:45 CET 2019
On Wed, Dec 18, 2019 at 11:06:48AM +0100, Heinrich Schuchardt wrote:
> On 12/18/19 9:22 AM, Cristian Ciocaltea wrote:
> > On Tue, Dec 17, 2019 at 10:08:31PM +0100, Heinrich Schuchardt wrote:
> > > On 12/17/19 8:47 AM, Cristian Ciocaltea wrote:
> > > > This test verifies the implementation of the 'bootm' extension that
> > > > handles UEFI binaries inside FIT images (enabled via CONFIG_BOOTM_EFI).
> > > >
> > > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at gmail.com>
> > > > ---
> > > > test/py/tests/test_efi_fit.py | 233 ++++++++++++++++++++++++++++++++++
> > > > 1 file changed, 233 insertions(+)
> > > > create mode 100644 test/py/tests/test_efi_fit.py
> > > >
> > > > diff --git a/test/py/tests/test_efi_fit.py b/test/py/tests/test_efi_fit.py
> > > > new file mode 100644
> > > > index 0000000000..52b415b198
> > > > --- /dev/null
> > > > +++ b/test/py/tests/test_efi_fit.py
> > > > @@ -0,0 +1,233 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +# Copyright (c) 2019, Cristian Ciocaltea <cristian.ciocaltea at gmail.com>
> > > > +
> > > > +# Test launching UEFI binaries from FIT images.
> > > > +
> > > > +import os
> > > > +import pytest
> > > > +import u_boot_utils as util
> > > > +
> > > > +# Define the parametrized ITS data to be used for FIT image generation.
> > > > +its_data = '''
> > > > +/dts-v1/;
> > > > +
> > > > +/ {
> > > > + description = "EFI image with FDT blob";
> > > > + #address-cells = <1>;
> > > > +
> > > > + images {
> > > > + efi {
> > > > + description = "Sandbox EFI";
> > > > + data = /incbin/("%(efi-bin)s");
> > > > + type = "%(kernel-type)s";
> > > > + arch = "sandbox";
> > > > + os = "efi";
> > > > + compression = "%(efi-comp)s";
> > > > + load = <0x0>;
> > > > + entry = <0x0>;
> > > > + };
> > > > + fdt {
> > > > + description = "Sandbox FDT";
> > > > + data = /incbin/("%(fdt-bin)s");
> > > > + type = "flat_dt";
> > > > + arch = "sandbox";
> > > > + compression = "%(fdt-comp)s";
> > > > + };
> > > > + };
> > > > +
> > > > + configurations {
> > > > + default = "config-efi-fdt";
> > > > + config-efi-fdt {
> > > > + description = "EFI FIT w/ FDT";
> > > > + kernel = "efi";
> > > > + fdt = "fdt";
> > > > + };
> > > > + config-efi-nofdt {
> > > > + description = "EFI FIT w/o FDT";
> > > > + kernel = "efi";
> > > > + };
> > > > + };
> > > > +};
> > > > +'''
> > > > +
> > > > +# Define the parametrized FDT data.
> > > > +fdt_data = '''
> > > > +/dts-v1/;
> > > > +
> > > > +/ {
> > > > + model = "Sandbox %(fdt_type) EFI FIT Boot Test ";
> > > > + compatible = "sandbox";
> > > > +
> > > > + reset at 0 {
> > > > + compatible = "sandbox,reset";
> > >
> > > This produces a warning:
> > >
> > > +dtc ./test-efi-fit-sandbox-internal.dts -O dtb -o
> > > ./test-efi-fit-sandbox-internal.dtb
> > > ./test-efi-fit-sandbox-internal.dts:8.13-10.7: Warning
> > > (unit_address_vs_reg): /reset at 0: node has a unit name, but no reg property
> >
> > A similar sample is also used by test_fit.py and test_vboot.py, which
> > expose the same warning, that's why I initially ignored it.
> > If acceptable, I can suppress it via '-W no-unit_address_vs_reg'.
>
> reset at 0 includes a unit-address. So a reg property is expected. How about:
>
> /dts-v1/;
>
> / {
> #address-cells = <1>;
> #size-cells = <0>;
>
> model = "Sandbox %(fdt_type) EFI FIT Boot Test ";
> compatible = "sandbox";
>
> reset at 0 {
> compatible = "sandbox,reset";
> reg = <0>;
> };
> };
Yes, that's a much better approach. It works fine, thanks!
> Best regards
>
> Heinrich
>
> >
> > > > + };
> > > > +};
> > > > +'''
> > > > +
> > > > + at pytest.mark.boardspec('sandbox')
> > >
> > > This test looks ok in principal. But why should we restrict it to the
> > > sandbox?
> >
> > Let me see how this should work on real hardware, I'm going to test
> > on qemu for the moment.
> >
> > > Best regards
> > >
> > > Heinrich
> > >
> > > > + at pytest.mark.buildconfigspec('bootm_efi')
> > > > + at pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
> > > > + at pytest.mark.requiredtool('dtc')
> > > > +def test_efi_fit(u_boot_console):
> > > > + """Test handling of UEFI binaries inside FIT images.
> > > > +
> > > > + The tests are trying to launch U-Boot's helloworld.efi embedded into
> > > > + FIT images, in uncompressed or gzip compressed format.
> > > > +
> > > > + Additionally, a sample FDT blob is created and embedded into the above
> > > > + mentioned FIT images, in uncompressed or gzip compressed format.
> > > > +
> > > > + The following test cases are currently defined and enabled:
> > > > + - Launch uncompressed FIT EFI & FIT FDT
> > > > + - Launch compressed FIT EFI & FIT FDT
> > > > + - Launch uncompressed FIT EFI & internal FDT
> > > > + - Launch compressed FIT EFI & internal FDT
> > > > + """
> > > > +
> > > > + def make_fpath(fname):
> > > > + """Compute the path of a given (temporary) file.
> > > > +
> > > > + Args:
> > > > + fname: The name of a file within U-Boot build dir.
> > > > + Return:
> > > > + The computed file path.
> > > > + """
> > > > + return os.path.join(u_boot_console.config.build_dir, fname)
> > > > +
> > > > + def make_efi(fname, comp):
> > > > + """Create an UEFI binary.
> > > > +
> > > > + This simply copies lib/efi_loader/helloworld.efi into U-Boot
> > > > + build dir and, optionally, compresses the file using gzip.
> > > > +
> > > > + Args:
> > > > + fname: The target file name within U-Boot build dir.
> > > > + comp: Flag to enable gzip compression.
> > > > + Return:
> > > > + The path of the created file.
> > > > + """
> > > > + bin_path = make_fpath(fname)
> > > > + os.system('cp %s %s' % (make_fpath('lib/efi_loader/helloworld.efi'), bin_path))
> > > > + if comp:
> > > > + util.run_and_log(u_boot_console, ['gzip', '-f', bin_path])
> > > > + bin_path += '.gz'
> > > > + return bin_path
> > > > +
> > > > + def make_dtb(fdt_type, comp):
> > > > + """Create a sample DTB file.
> > > > +
> > > > + Creates a DTS file and compiles it to a DTB.
> > > > +
> > > > + Args:
> > > > + fdt_type: The type of the FDT, i.e. internal, user.
> > > > + comp: Flag to enable gzip compression.
> > > > + Returns:
> > > > + The path of the created file.
> > > > + """
> > > > + dts = make_fpath('test-efi-fit-sandbox-%s.dts' % fdt_type)
> > > > + dtb = make_fpath('test-efi-fit-sandbox-%s.dtb' % fdt_type)
> > > > + with open(dts, 'w') as fd:
> > > > + fd.write(fdt_data)
> > > > + util.run_and_log(u_boot_console, ['dtc', dts, '-O', 'dtb', '-o', dtb])
> > > > + if comp:
> > > > + util.run_and_log(u_boot_console, ['gzip', '-f', dtb])
> > > > + dtb += '.gz'
> > > > + return dtb
> > > > +
> > > > + def make_fit(efi_comp, fdt_comp):
> > > > + """Create a sample FIT image.
> > > > +
> > > > + Runs 'mkimage' to create a FIT image within U-Boot build dir.
> > > > + Args:
> > > > + efi_comp: Enable gzip compression for the EFI binary.
> > > > + fdt_comp: Enable gzip compression for the FDT blob.
> > > > + Return:
> > > > + The path of the created file.
> > > > + """
> > > > + # Generate resources referenced by ITS.
> > > > + its_params = {
> > > > + 'efi-bin' : os.path.basename(
> > > > + make_efi('test-efi-fit-sandbox.efi', efi_comp)),
> > > > + 'kernel-type' : 'kernel' if efi_comp else 'kernel_noload',
> > > > + 'efi-comp' : 'gzip' if efi_comp else 'none',
> > > > + 'fdt-bin' : os.path.basename(make_dtb('user', fdt_comp)),
> > > > + 'fdt-comp' : 'gzip' if fdt_comp else 'none',
> > > > + }
> > > > +
> > > > + # Generate a test ITS file.
> > > > + its_path = make_fpath('test-efi-fit.its')
> > > > + with open(its_path, 'w') as fd:
> > > > + fd.write(its_data % its_params)
> > > > +
> > > > + # Build the test ITS.
> > > > + fit_path = make_fpath('test-efi-fit.fit')
> > > > + util.run_and_log(u_boot_console,
> > > > + [make_fpath('tools/mkimage'), '-f', its_path, fit_path])
> > > > + return fit_path
> > > > +
> > > > + def file_size(fpath):
> > > > + """Get the size of a file.
> > > > +
> > > > + Args:
> > > > + fname: Path of the file to check.
> > > > + Return:
> > > > + The size of file in bytes.
> > > > + """
> > > > + return os.stat(fpath).st_size
> > > > +
> > > > + def launch_efi(enable_fdt, enable_comp):
> > > > + """Launch a UEFI binary from a FIT image.
> > > > +
> > > > + Creates a test FIT image containing a fake UEFI binary and tries
> > > > + to run it via the 'bootm' command in the U-Boot console.
> > > > +
> > > > + Args:
> > > > + enable_fdt: Flag to enable using the FDT blob inside FIT image.
> > > > + enable_comp: Flag to enable gzip compression on EFI and FDT content.
> > > > + """
> > > > + # Create test FIT image.
> > > > + fit_img_path = make_fit(enable_comp, enable_comp)
> > > > +
> > > > + # Select boot configuration.
> > > > + fit_config = 'config-efi-fdt' if enable_fdt else 'config-efi-nofdt'
> > > > +
> > > > + # Run U-Boot commands.
> > > > + with u_boot_console.log.section('Boot EFI FIT %s' % fit_config):
> > > > + output = u_boot_console.run_command(
> > > > + 'host load hostfs - $kernel_addr_r %s' % fit_img_path)
> > > > +
> > > > + expected_text = '%d bytes read' % file_size(fit_img_path)
> > > > + assert(expected_text in output)
> > > > +
> > > > + output = u_boot_console.run_command(
> > > > + 'bootm ${kernel_addr_r}#%s' % fit_config)
> > > > +
> > > > + if enable_fdt:
> > > > + expected_text = 'Booting using the fdt blob'
> > > > + assert(expected_text in output)
> > > > +
> > > > + expected_text = 'Hello, world'
> > > > + assert expected_text in output
> > > > + expected_text = '## Application terminated, r = 0'
> > > > + assert expected_text in output
> > > > +
> > > > + try:
> > > > + # Use our own device tree file, will be restored afterwards.
> > > > + control_dtb = make_dtb('internal', False)
> > > > + old_dtb = u_boot_console.config.dtb
> > > > + u_boot_console.config.dtb = control_dtb
> > > > +
> > > > + # Run tests
> > > > + # - fdt ON, gzip OFF
> > > > + launch_efi(True, False)
> > > > + # - fdt ON, gzip ON
> > > > + launch_efi(True, True)
> > > > + # - fdt OFF, gzip OFF
> > > > + launch_efi(False, False)
> > > > + # - fdt OFF, gzip ON
> > > > + launch_efi(False, True)
> > > > +
> > > > + finally:
> > > > + # Go back to the original U-Boot with the correct dtb.
> > > > + u_boot_console.config.dtb = old_dtb
> > > > + u_boot_console.restart_uboot()
> > > >
> > >
> >
>
More information about the U-Boot
mailing list