[PATCH v6] imx: Add support for i.MX28 based XEA board

[sbabic at denx.de]

> This patch introduces support for i.MX28 based XEA board.
> This board supports DM/DTS in U-Boot proper as well as DM aware drivers
> in SPL (u-boot.sb) by using OF_PLATDATA.
> More detailed information regarding usage of it can be found in
> ./board/liebherr/xea/README file.
> U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
> Trying to boot from MMC1
> MMC0: Command 8 timeout (status 0xf0344020)
> mmc_load_image_raw_sector: mmc block read error
> U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
> CPU:   Freescale i.MX28 rev1.2 at 454 MHz
> BOOT:  SSP SPI #3, master, 3V3 NOR
> Model: Liebherr (LWE) XEA i.MX28 Board
> DRAM:  128 MiB
> MMC:   MXS MMC: 0
> Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
> OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:
> Warning: ethernet at 800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
> eth0: ethernet at 800f0000
> Hit any key to stop autoboot:  0
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================