[v2] armv8: fsl-layerscape: Kconfig: Correct I2C dependecies

Jagdish Gediya jagdish.gediya at nxp.com
Mon Dec 23 11:21:42 CET 2019


Hi Biwen,

> -----Original Message-----
> From: Biwen Li <biwen.li at nxp.com>
> Sent: Monday, December 23, 2019 12:09 PM
> To: Priyanka Jain <priyanka.jain at nxp.com>; Jagdish Gediya
> <jagdish.gediya at nxp.com>
> Cc: u-boot at lists.denx.de; Jiafei Pan <jiafei.pan at nxp.com>; Biwen Li
> <biwen.li at nxp.com>
> Subject: [v2] armv8: fsl-layerscape: Kconfig: Correct I2C dependecies
> 
> Don't select SYS_I2C_MXC_I2C* when DM_I2C is enabled. This is required to
> resolve below warnings while 'make *defconfig'
> 
> 	ARCH_LS1046A [=y] && ARM [=y]
> 	WARNING: unmet direct dependencies detected for
> SYS_I2C_MXC_I2C3
> 	Depends on [n]: SYS_I2C_MXC [=y] && (!DM_I2C [=y] || SPL [=n])
> 	Selected by [y]:
> 
> Signed-off-by: Biwen Li <biwen.li at nxp.com>
> ---
> Change in v2:
> 	- update subject and descriptions
> 
>  arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 20 ++++++++++----------
These changes are not required in upstream as this issue caused by http://patchwork.ozlabs.org/patch/1213011/ and it is not accepted yet. Merge these changes with http://patchwork.ozlabs.org/patch/1213011/. 
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
> b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
> index f1578b10bc..84ece4d587 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
> @@ -16,8 +16,8 @@ config ARCH_LS1012A
>  	select ARCH_EARLY_INIT_R
>  	select BOARD_EARLY_INIT_F
>  	select SYS_I2C_MXC
> -	select SYS_I2C_MXC_I2C1
> -	select SYS_I2C_MXC_I2C2
> +	select SYS_I2C_MXC_I2C1 if !DM_I2C
> +	select SYS_I2C_MXC_I2C2 if !DM_I2C
>  	imply PANIC_HANG
Merge above changes in http://patchwork.ozlabs.org/patch/1213016/ 
> 
>  config ARCH_LS1028A
> @@ -75,10 +75,10 @@ config ARCH_LS1043A
>  	select ARCH_EARLY_INIT_R
>  	select BOARD_EARLY_INIT_F
>  	select SYS_I2C_MXC
> -	select SYS_I2C_MXC_I2C1
> -	select SYS_I2C_MXC_I2C2
> -	select SYS_I2C_MXC_I2C3
> -	select SYS_I2C_MXC_I2C4
> +	select SYS_I2C_MXC_I2C1 if !DM_I2C
> +	select SYS_I2C_MXC_I2C2 if !DM_I2C
> +	select SYS_I2C_MXC_I2C3 if !DM_I2C
> +	select SYS_I2C_MXC_I2C4 if !DM_I2C
>  	imply CMD_PCI
Merge above changes in http://patchwork.ozlabs.org/patch/1213017/ 
> 
>  config ARCH_LS1046A
> @@ -108,10 +108,10 @@ config ARCH_LS1046A
>  	select ARCH_EARLY_INIT_R
>  	select BOARD_EARLY_INIT_F
>  	select SYS_I2C_MXC
> -	select SYS_I2C_MXC_I2C1
> -	select SYS_I2C_MXC_I2C2
> -	select SYS_I2C_MXC_I2C3
> -	select SYS_I2C_MXC_I2C4
> +	select SYS_I2C_MXC_I2C1 if !DM_I2C
> +	select SYS_I2C_MXC_I2C2 if !DM_I2C
> +	select SYS_I2C_MXC_I2C3 if !DM_I2C
> +	select SYS_I2C_MXC_I2C4 if !DM_I2C
>  	imply SCSI
>  	imply SCSI_AHCI
Merge above changes in http://patchwork.ozlabs.org/patch/1213018/

--Jagdish


More information about the U-Boot mailing list