[U-Boot] [PATCHv2 1/3] mmc: meson-gx: Fix clk phase tuning for MMC

[Anand Moon]

Hi Jerome,

On Thu, 26 Dec 2019 at 14:40, Jerome Brunet <jbrunet at baylibre.com> wrote:
>
>
> On Tue 24 Dec 2019 at 14:25, Anand Moon <linux.amoon at gmail.com> wrote:
>
> > As per mainline line kernel fix the clk tunnig phase for
> > mmc, set Core=180, Tx=0, Rx=0 clk phase for mmc initialization.
> >
> > Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> > ---
> > Changes from previous
> > use the mainline kernel tuning for clk tuning.
> > Fixed the commmit messages.
> > Patch v1:
> > https://patchwork.ozlabs.org/patch/1201208/
> >
> > Before these changes.
> >     clock is enabled (380953Hz)
> >     clock is enabled (25000000Hz)
> > After these changes
> >     clock is enabled (380953Hz)
> >     clock is enabled (25000000Hz)
> >     clock is enabled (52000000Hz)
> > Test on Odroid N2 and Odroid C2 with eMMC and microSD cards
> > ---
> >  arch/arm/include/asm/arch-meson/sd_emmc.h | 14 ++++++--------
> >  drivers/mmc/meson_gx_mmc.c                |  9 +++++----
> >  2 files changed, 11 insertions(+), 12 deletions(-)
> >
> > diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
> > index e3a72c8b66..d70fe4f03e 100644
> > --- a/arch/arm/include/asm/arch-meson/sd_emmc.h
> > +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
> > @@ -7,6 +7,7 @@
> >  #define __SD_EMMC_H__
> >
> >  #include <mmc.h>
> > +#include <linux/bitops.h>
> >
> >  #define SDIO_PORT_A                  0
> >  #define SDIO_PORT_B                  1
> > @@ -19,14 +20,11 @@
> >  #define   CLK_MAX_DIV                        63
> >  #define   CLK_SRC_24M                        (0 << 6)
> >  #define   CLK_SRC_DIV2                       (1 << 6)
> > -#define   CLK_CO_PHASE_000           (0 << 8)
> > -#define   CLK_CO_PHASE_090           (1 << 8)
> > -#define   CLK_CO_PHASE_180           (2 << 8)
> > -#define   CLK_CO_PHASE_270           (3 << 8)
> > -#define   CLK_TX_PHASE_000           (0 << 10)
> > -#define   CLK_TX_PHASE_090           (1 << 10)
> > -#define   CLK_TX_PHASE_180           (2 << 10)
> > -#define   CLK_TX_PHASE_270           (3 << 10)
> > +
> > +#define   CLK_CORE_PHASE_MASK                GENMASK(9, 8)
> > +#define   CLK_TX_PHASE_MASK          GENMASK(11, 10)
> > +#define   CLK_RX_PHASE_MASK          GENMASK(13, 12)
> > +
> >  #define   CLK_ALWAYS_ON                      BIT(24)
> >
> >  #define MESON_SD_EMMC_CFG            0x44
> > diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> > index 86c1a7164a..402981c3bb 100644
> > --- a/drivers/mmc/meson_gx_mmc.c
> > +++ b/drivers/mmc/meson_gx_mmc.c
> > @@ -52,10 +52,11 @@ static void meson_mmc_config_clock(struct mmc *mmc)
> >       clk_div = DIV_ROUND_UP(clk, mmc->clock);
> >
> >       /* 180 phase core clock */
> > -     meson_mmc_clk |= CLK_CO_PHASE_180;
> > -
> > -     /* 180 phase tx clock */
> > -     meson_mmc_clk |= CLK_TX_PHASE_000;
> > +     meson_mmc_clk |= CLK_CORE_PHASE_MASK;
> > +     /* 000 phase rx clock */
> > +     meson_mmc_clk |= CLK_RX_PHASE_MASK;
> > +     /* 000 phase tx clock */
> > +     meson_mmc_clk |= CLK_TX_PHASE_MASK;
> >
>
> I'm not sure how this acheive what is descibed in the commit
> description.
>
> It looks more that it would set a 270 degree phase on all clocks, which
> is not desirable.
>
Oops thanks for spotting my mistake, you are correct, it should be as below.

clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
I will resend with correct configuration.

-Anand