[PATCH 2/4] rockchip: rk3288-evb: update SPL_STACK/MALLOC_LEN config with rk3399

[Kever Yang]

Update the SPL_STACK_R_MALLOC_SIMPLE_LEN which also including space for
STACK and the size may not enough when loding FIT image in SPL.

If the size is not enough, you can see log like this when loding FIT:

U-Boot TPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53 +0800)
Trying to boot from MMC2

And if enable the DEBUG for everyting in SPL, the log will hang at dwmmc
sending CMD16 for 'uboot' loadables binary because this step need a
large stack cost(about 0x2d00).

External data: dst=8400000, offset=72638, size=b3580
Image OS is Trusted Execution Environment
board_fit_config_name_match: rk3288-evb
Selecting config 'rk3288-evb'loadables: 'uboot'
blk_find_device: if_type=6, devnum=1: dwmmc at ff0c0000.blk, 6, 0
blk_find_device: if_type=6, devnum=1: dwmmc at ff0f0000.blk, 6, 1
Sending CMD16

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 configs/evb-rk3288_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
index 36f6d4a18e..685120cd78 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288_defconfig
@@ -4,7 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x01000000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_EVB_RK3288=y
 CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_SPL_STACK_R_ADDR=0x04000000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL_SIZE_LIMIT=0x4b000
 CONFIG_DEBUG_UART_BASE=0xff690000
@@ -17,7 +17,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
-- 
2.17.1