[U-Boot] [NXP-IMX] please pull imx-master-11-21

[Stefano Babic]

On 22/11/19 07:42, Peng Fan wrote:
> Hi Stefano,
> 
> Please pull imx-master-11-21, based on imx/master.
> CI: https://travis-ci.org/MrVan/u-boot/builds/614830163
> 
> --------------------------------------------------------
> i.mx6qp noc settings
> i.mx7ulp update and artists com board support
> --------------------------------------------------------
> 
> Thanks,
> Peng.
> 

About mx7ulp (and warp7,

Tom has merged this one:

commit a09fea1d28fe3c69a64bee092f5a764274d26ca2
Author: Tom Rini <trini at konsulko.com>
Date:   Mon Nov 18 20:02:10 2019 -0500

    env: Finish migration of common ENV options

This drop CONFIG_ENV_SIZE from boards' header. If I merge your PR and
the fix for warp7, I will reintroduce the CONFIG_ENV_*Ü, and it is like
to do against Tom's patch. I think you should rework them to avoid the
reintroduction in the header file.

I will just pick up myself i.mx6qp patch.

Regards,
Stefano

> The following changes since commit bdcf3a88cc582ce8bb9ea024fa917d9a52e05479:
> 
>   imx: imx8mm-evk: enable ethernet (2019-11-05 10:27:18 +0100)
> 
> are available in the Git repository at:
> 
>   https://github.com/MrVan/u-boot.git imx-master-11-21
> 
> for you to fetch changes up to 153d06d07d6827460e62045bd51083e64a727648:
> 
>   mx6cuboxi: Add Baruch as maintainer (2019-11-21 09:50:23 +0800)
> 
> ----------------------------------------------------------------
> Fabio Estevam (8):
>       mx6: Allow configuring the NoC registers on i.MX6QP
>       mx7ulp: Print the LDO mode status
>       mx7ulp: Introduce the CONFIG_LDO_ENABLED_MODE option
>       mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions
>       mx7ulp: scg: Remove unnused scg_a7_apll_init()
>       mx7ulp: Sync the device tree related files
>       mx7ulp: Add support for Embedded Artists COM board
>       mx6cuboxi: Add Baruch as maintainer
> 
>  arch/arm/dts/Makefile                  |    3 +-
>  arch/arm/dts/imx7ulp-com.dts           |   90 +++++++
>  arch/arm/dts/imx7ulp-evk.dts           |  157 +++++-------
>  arch/arm/dts/imx7ulp-pinfunc.h         | 1748 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
>  arch/arm/dts/imx7ulp.dtsi              |   28 ++-
>  arch/arm/include/asm/arch-mx7ulp/scg.h |    1 -
>  arch/arm/mach-imx/mx6/soc.c            |   35 +++
>  arch/arm/mach-imx/mx7ulp/Kconfig       |   11 +
>  arch/arm/mach-imx/mx7ulp/scg.c         |   61 -----
>  arch/arm/mach-imx/mx7ulp/soc.c         |   78 ++++++
>  board/ea/mx7ulp_com/Kconfig            |   12 +
>  board/ea/mx7ulp_com/MAINTAINERS        |    6 +
>  board/ea/mx7ulp_com/Makefile           |    6 +
>  board/ea/mx7ulp_com/imximage.cfg       |  128 ++++++++++
>  board/ea/mx7ulp_com/mx7ulp_com.c       |   48 ++++
>  board/solidrun/mx6cuboxi/MAINTAINERS   |    1 +
>  configs/mx7ulp_com_defconfig           |   59 +++++
>  include/configs/mx7ulp_com.h           |  107 +++++++++
>  18 files changed, 1552 insertions(+), 1027 deletions(-)
>  create mode 100644 arch/arm/dts/imx7ulp-com.dts
>  create mode 100644 board/ea/mx7ulp_com/Kconfig
>  create mode 100644 board/ea/mx7ulp_com/MAINTAINERS
>  create mode 100644 board/ea/mx7ulp_com/Makefile
>  create mode 100644 board/ea/mx7ulp_com/imximage.cfg
>  create mode 100644 board/ea/mx7ulp_com/mx7ulp_com.c
>  create mode 100644 configs/mx7ulp_com_defconfig
>  create mode 100644 include/configs/mx7ulp_com.h
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================