[PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Thu Dec 19 12:32:06 CET 2019
Am 18.12.19 um 12:59 schrieb Andre Przywara:
> From: Amit Singh Tomar <amittomer25 at gmail.com>
>
> The Broadcom GENET Ethernet MACs are used in several MIPS based SoCs
> and in the Broadcom 2711/2838 SoC used on the Raspberry Pi 4.
> There is no publicly available documentation, so this driver is based
> on the Linux driver. Compared to that the queue management is
> drastically simplified, also we only support version 5 of the IP and
> RGMII connections between MAC and PHY, as used on the RPi4.
>
> Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
> Reviewed-by: Andre Przywara <andre.przywara at arm.com>
> [Andre: heavy cleanup and a few fixes]
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/net/Kconfig | 7 +
> drivers/net/Makefile | 1 +
> drivers/net/bcmgenet.c | 702 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 710 insertions(+)
> create mode 100644 drivers/net/bcmgenet.c
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 142a2c6953..999714dd39 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -136,6 +136,13 @@ config BCM6368_ETH
> help
> This driver supports the BCM6368 Ethernet MAC.
>
> +config BCMGENET
> + bool "BCMGENET V5 support"
> + depends on DM_ETH
> + select PHYLIB
> + help
> + This driver supports the BCMGENET Ethernet MAC.
> +
> config DWC_ETH_QOS
> bool "Synopsys DWC Ethernet QOS device support"
> depends on DM_ETH
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 30991834ec..6e0a68834d 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_AG7XXX) += ag7xxx.o
> obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
> obj-$(CONFIG_BCM6348_ETH) += bcm6348-eth.o
> obj-$(CONFIG_BCM6368_ETH) += bcm6368-eth.o
> +obj-$(CONFIG_BCMGENET) += bcmgenet.o
> obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
> obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
> obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
> diff --git a/drivers/net/bcmgenet.c b/drivers/net/bcmgenet.c
> new file mode 100644
> index 0000000000..24b025d804
> --- /dev/null
> +++ b/drivers/net/bcmgenet.c
> @@ -0,0 +1,702 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Amit Singh Tomar <amittomer25 at gmail.com>
> + *
> + * Driver for Broadcom GENETv5 Ethernet controller (as found on the RPi4)
> + * This driver is based on the Linux driver:
> + * drivers/net/ethernet/broadcom/genet/bcmgenet.c
> + * which is: Copyright (c) 2014-2017 Broadcom
> + *
> + * The hardware supports multiple queues (16 priority queues and one
> + * default queue), both for RX and TX. There are 256 DMA descriptors (both
> + * for TX and RX), and they live in MMIO registers. The hardware allows
> + * assigning descriptor ranges to queues, but we choose the most simple setup:
> + * All 256 descriptors are assigned to the default queue (#16).
> + * Also the Linux driver supports multiple generations of the MAC, whereas
> + * we only support v5, as used in the Raspberry Pi 4.
> + */
> +
> +#include <asm/io.h>
> +#include <clk.h>
> +#include <cpu_func.h>
> +#include <dm.h>
> +#include <fdt_support.h>
> +#include <linux/err.h>
> +#include <malloc.h>
> +#include <miiphy.h>
> +#include <net.h>
> +#include <dm/of_access.h>
> +#include <dm/ofnode.h>
> +#include <linux/libfdt.h>
> +#include <linux/iopoll.h>
> +#include <asm/dma-mapping.h>
> +#include <wait_bit.h>
> +
> +/* Register definitions derived from Linux source */
> +#define SYS_REV_CTRL 0x00
> +
> +#define SYS_PORT_CTRL 0x04
> +#define PORT_MODE_EXT_GPHY 3
> +
> +#define GENET_SYS_OFF 0x0000
> +#define SYS_RBUF_FLUSH_CTRL (GENET_SYS_OFF + 0x08)
> +#define SYS_TBUF_FLUSH_CTRL (GENET_SYS_OFF + 0x0c)
> +
> +#define GENET_EXT_OFF 0x0080
> +#define EXT_RGMII_OOB_CTRL (GENET_EXT_OFF + 0x0c)
> +#define RGMII_LINK BIT(4)
> +#define OOB_DISABLE BIT(5)
> +#define RGMII_MODE_EN BIT(6)
> +#define ID_MODE_DIS BIT(16)
> +
> +#define GENET_RBUF_OFF 0x0300
> +#define RBUF_TBUF_SIZE_CTRL (GENET_RBUF_OFF + 0xb4)
> +#define RBUF_CTRL (GENET_RBUF_OFF + 0x00)
> +#define RBUF_ALIGN_2B BIT(1)
> +
> +#define GENET_UMAC_OFF 0x0800
> +#define UMAC_MIB_CTRL (GENET_UMAC_OFF + 0x580)
> +#define UMAC_MAX_FRAME_LEN (GENET_UMAC_OFF + 0x014)
> +#define UMAC_MAC0 (GENET_UMAC_OFF + 0x00c)
> +#define UMAC_MAC1 (GENET_UMAC_OFF + 0x010)
> +#define UMAC_CMD (GENET_UMAC_OFF + 0x008)
> +#define MDIO_CMD (GENET_UMAC_OFF + 0x614)
> +#define UMAC_TX_FLUSH (GENET_UMAC_OFF + 0x334)
> +#define MDIO_START_BUSY BIT(29)
> +#define MDIO_READ_FAIL BIT(28)
> +#define MDIO_RD (2 << 26)
> +#define MDIO_WR BIT(26)
> +#define MDIO_PMD_SHIFT 21
> +#define MDIO_PMD_MASK 0x1f
> +#define MDIO_REG_SHIFT 16
> +#define MDIO_REG_MASK 0x1f
> +
> +#define CMD_TX_EN BIT(0)
> +#define CMD_RX_EN BIT(1)
> +#define UMAC_SPEED_10 0
> +#define UMAC_SPEED_100 1
> +#define UMAC_SPEED_1000 2
> +#define UMAC_SPEED_2500 3
> +#define CMD_SPEED_SHIFT 2
> +#define CMD_SPEED_MASK 3
> +#define CMD_SW_RESET BIT(13)
> +#define CMD_LCL_LOOP_EN BIT(15)
> +#define CMD_TX_EN BIT(0)
> +#define CMD_RX_EN BIT(1)
> +
> +#define MIB_RESET_RX BIT(0)
> +#define MIB_RESET_RUNT BIT(1)
> +#define MIB_RESET_TX BIT(2)
> +
> +/* total number of Buffer Descriptors, same for Rx/Tx */
> +#define TOTAL_DESCS 256
> +#define RX_DESCS TOTAL_DESCS
> +#define TX_DESCS TOTAL_DESCS
> +
> +#define DEFAULT_Q 0x10
> +
> +/* Body(1500) + EH_SIZE(14) + VLANTAG(4) + BRCMTAG(6) + FCS(4) = 1528.
> + * 1536 is multiple of 256 bytes
> + */
> +#define ENET_BRCM_TAG_LEN 6
> +#define ENET_PAD 8
> +#define ENET_MAX_MTU_SIZE (ETH_DATA_LEN + ETH_HLEN + \
> + VLAN_HLEN + ENET_BRCM_TAG_LEN + \
> + ETH_FCS_LEN + ENET_PAD)
> +
> +/* Tx/Rx Dma Descriptor common bits */
> +#define DMA_EN BIT(0)
> +#define DMA_RING_BUF_EN_SHIFT 0x01
> +#define DMA_RING_BUF_EN_MASK 0xffff
> +#define DMA_BUFLENGTH_MASK 0x0fff
> +#define DMA_BUFLENGTH_SHIFT 16
> +#define DMA_RING_SIZE_SHIFT 16
> +#define DMA_OWN 0x8000
> +#define DMA_EOP 0x4000
> +#define DMA_SOP 0x2000
> +#define DMA_WRAP 0x1000
> +#define DMA_MAX_BURST_LENGTH 0x8
> +/* Tx specific DMA descriptor bits */
> +#define DMA_TX_UNDERRUN 0x0200
> +#define DMA_TX_APPEND_CRC 0x0040
> +#define DMA_TX_OW_CRC 0x0020
> +#define DMA_TX_DO_CSUM 0x0010
> +#define DMA_TX_QTAG_SHIFT 7
> +
> +/* DMA rings size */
> +#define DMA_RING_SIZE 0x40
> +#define DMA_RINGS_SIZE (DMA_RING_SIZE * (DEFAULT_Q + 1))
> +
> +/* DMA descriptor */
> +#define DMA_DESC_LENGTH_STATUS 0x00
> +#define DMA_DESC_ADDRESS_LO 0x04
> +#define DMA_DESC_ADDRESS_HI 0x08
> +#define DMA_DESC_SIZE 12
> +
> +#define GENET_RX_OFF 0x2000
> +#define GENET_RDMA_REG_OFF \
> + (GENET_RX_OFF + TOTAL_DESCS * DMA_DESC_SIZE)
> +#define GENET_TX_OFF 0x4000
> +#define GENET_TDMA_REG_OFF \
> + (GENET_TX_OFF + TOTAL_DESCS * DMA_DESC_SIZE)
> +
> +#define DMA_FC_THRESH_HI (RX_DESCS >> 4)
> +#define DMA_FC_THRESH_LO 5
> +#define DMA_FC_THRESH_VALUE ((DMA_FC_THRESH_LO << 16) | \
> + DMA_FC_THRESH_HI)
> +
> +#define DMA_XOFF_THRESHOLD_SHIFT 16
> +
> +#define TDMA_RING_REG_BASE \
> + (GENET_TDMA_REG_OFF + DEFAULT_Q * DMA_RING_SIZE)
> +#define TDMA_READ_PTR (TDMA_RING_REG_BASE + 0x00)
> +#define TDMA_CONS_INDEX (TDMA_RING_REG_BASE + 0x08)
> +#define TDMA_PROD_INDEX (TDMA_RING_REG_BASE + 0x0c)
> +#define DMA_RING_BUF_SIZE 0x10
> +#define DMA_START_ADDR 0x14
> +#define DMA_END_ADDR 0x1c
> +#define DMA_MBUF_DONE_THRESH 0x24
> +#define TDMA_FLOW_PERIOD (TDMA_RING_REG_BASE + 0x28)
> +#define TDMA_WRITE_PTR (TDMA_RING_REG_BASE + 0x2c)
> +
> +#define RDMA_RING_REG_BASE \
> + (GENET_RDMA_REG_OFF + DEFAULT_Q * DMA_RING_SIZE)
> +#define RDMA_WRITE_PTR (RDMA_RING_REG_BASE + 0x00)
> +#define RDMA_PROD_INDEX (RDMA_RING_REG_BASE + 0x08)
> +#define RDMA_CONS_INDEX (RDMA_RING_REG_BASE + 0x0c)
> +#define RDMA_XON_XOFF_THRESH (RDMA_RING_REG_BASE + 0x28)
> +#define RDMA_READ_PTR (RDMA_RING_REG_BASE + 0x2c)
> +
> +#define TDMA_REG_BASE (GENET_TDMA_REG_OFF + DMA_RINGS_SIZE)
> +#define RDMA_REG_BASE (GENET_RDMA_REG_OFF + DMA_RINGS_SIZE)
> +#define DMA_RING_CFG 0x00
> +#define DMA_CTRL 0x04
> +#define DMA_SCB_BURST_SIZE 0x0c
> +
> +#define RX_BUF_LENGTH 2048
> +#define RX_TOTAL_BUFSIZE (RX_BUF_LENGTH * RX_DESCS)
> +#define RX_BUF_OFFSET 2
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct bcmgenet_eth_priv {
> + void *mac_reg;
> + char rxbuffer[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
> + void *tx_desc_base;
> + void *rx_desc_base;
> + int tx_index;
> + int rx_index;
> + int c_index;
> + int phyaddr;
> + u32 interface;
> + u32 speed;
> + struct phy_device *phydev;
> + struct mii_dev *bus;
> +};
> +
> +static void bcmgenet_umac_reset(struct bcmgenet_eth_priv *priv)
> +{
> + u32 reg;
> +
> + reg = readl(priv->mac_reg + SYS_RBUF_FLUSH_CTRL);
> + reg |= BIT(1);
> + writel(reg, (priv->mac_reg + SYS_RBUF_FLUSH_CTRL));
> + udelay(10);
> +
> + reg &= ~BIT(1);
> + writel(reg, (priv->mac_reg + SYS_RBUF_FLUSH_CTRL));
> + udelay(10);
> +
> + writel(0, (priv->mac_reg + SYS_RBUF_FLUSH_CTRL));
> + udelay(10);
> +
> + writel(0, priv->mac_reg + UMAC_CMD);
> +
> + writel(CMD_SW_RESET | CMD_LCL_LOOP_EN, priv->mac_reg + UMAC_CMD);
> + udelay(2);
> + writel(0, priv->mac_reg + UMAC_CMD);
> +
> + /* clear tx/rx counter */
> + writel(MIB_RESET_RX | MIB_RESET_TX | MIB_RESET_RUNT,
> + priv->mac_reg + UMAC_MIB_CTRL);
> + writel(0, priv->mac_reg + UMAC_MIB_CTRL);
> +
> + writel(ENET_MAX_MTU_SIZE, priv->mac_reg + UMAC_MAX_FRAME_LEN);
> +
> + /* init rx registers, enable ip header optimization */
> + reg = readl(priv->mac_reg + RBUF_CTRL);
> + reg |= RBUF_ALIGN_2B;
> + writel(reg, (priv->mac_reg + RBUF_CTRL));
> +
> + writel(1, (priv->mac_reg + RBUF_TBUF_SIZE_CTRL));
> +}
> +
> +static int bcmgenet_gmac_write_hwaddr(struct udevice *dev)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *addr = pdata->enetaddr;
> + u32 reg;
> +
> + reg = addr[0] << 24 | addr[1] << 16 | addr[2] << 8 | addr[3];
> + writel_relaxed(reg, priv->mac_reg + UMAC_MAC0);
> +
> + reg = addr[4] << 8 | addr[5];
> + writel_relaxed(reg, priv->mac_reg + UMAC_MAC1);
> +
> + return 0;
> +}
> +
> +static void bcmgenet_disable_dma(struct bcmgenet_eth_priv *priv)
> +{
> + clrbits_le32(priv->mac_reg + TDMA_REG_BASE + DMA_CTRL, DMA_EN);
> + clrbits_le32(priv->mac_reg + RDMA_REG_BASE + DMA_CTRL, DMA_EN);
for cross-arch compatibility with MIPS please use the endian-native
variants like clrbits_32 or setbits_32 etc.
> +
> + writel(1, priv->mac_reg + UMAC_TX_FLUSH);
> + udelay(10);
> + writel(0, priv->mac_reg + UMAC_TX_FLUSH);
> +}
> +
> +static void bcmgenet_enable_dma(struct bcmgenet_eth_priv *priv)
> +{
> + u32 dma_ctrl = (1 << (DEFAULT_Q + DMA_RING_BUF_EN_SHIFT)) | DMA_EN;
> +
> + writel(dma_ctrl, priv->mac_reg + TDMA_REG_BASE + DMA_CTRL);
> +
> + setbits_le32(priv->mac_reg + RDMA_REG_BASE + DMA_CTRL, dma_ctrl);
> +}
> +
> +static int bcmgenet_gmac_eth_send(struct udevice *dev, void *packet, int length)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + void *desc_base = priv->tx_desc_base + priv->tx_index * DMA_DESC_SIZE;
> + u32 len_stat = length << DMA_BUFLENGTH_SHIFT;
> + u32 prod_index, cons;
> + u32 tries = 100;
> +
> + prod_index = readl(priv->mac_reg + TDMA_PROD_INDEX);
> +
> + flush_dcache_range((ulong)packet, (ulong)packet + length);
> +
> + len_stat |= 0x3F << DMA_TX_QTAG_SHIFT;
> + len_stat |= DMA_TX_APPEND_CRC | DMA_SOP | DMA_EOP;
> +
> + /* Set-up packet for transmission */
> + writel(lower_32_bits((ulong)packet), (desc_base + DMA_DESC_ADDRESS_LO));
> + writel(upper_32_bits((ulong)packet), (desc_base + DMA_DESC_ADDRESS_HI));
> + writel(len_stat, (desc_base + DMA_DESC_LENGTH_STATUS));
> +
> + /* Increment index and start transmission */
> + if (++priv->tx_index >= TX_DESCS)
> + priv->tx_index = 0;
> +
> + prod_index++;
> +
> + /* Start Transmisson */
> + writel(prod_index, priv->mac_reg + TDMA_PROD_INDEX);
> +
> + do {
> + cons = readl(priv->mac_reg + TDMA_CONS_INDEX);
> + } while ((cons & 0xffff) < prod_index && --tries);
> + if (!tries)
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int bcmgenet_gmac_eth_recv(struct udevice *dev,
> + int flags, uchar **packetp)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + void *desc_base = priv->rx_desc_base + priv->rx_index * DMA_DESC_SIZE;
> + u32 prod_index = readl(priv->mac_reg + RDMA_PROD_INDEX);
> + u32 length, addr;
> +
> + if (prod_index == priv->c_index)
> + return -EAGAIN;
> +
> + length = readl(desc_base + DMA_DESC_LENGTH_STATUS);
> + length = (length >> DMA_BUFLENGTH_SHIFT) & DMA_BUFLENGTH_MASK;
> + addr = readl(desc_base + DMA_DESC_ADDRESS_LO);
> +
> + invalidate_dcache_range(addr,
> + addr + roundup(length, ARCH_DMA_MINALIGN));
> +
> + /* To cater for the IP header alignment the hardware does.
> + * This would actually not be needed if we don't program
> + * RBUF_ALIGN_2B
> + */
> + *packetp = (uchar *)(ulong)addr + RX_BUF_OFFSET;
> +
> + return length - RX_BUF_OFFSET;
> +}
> +
> +static int bcmgenet_gmac_free_pkt(struct udevice *dev, uchar *packet,
> + int length)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> +
> + /* Tell the MAC we have consumed that last receive buffer. */
> + priv->c_index = (priv->c_index + 1) & 0xFFFF;
> + writel(priv->c_index, priv->mac_reg + RDMA_CONS_INDEX);
> +
> + /* Forward our descriptor pointer, wrapping around if needed. */
> + if (++priv->rx_index >= RX_DESCS)
> + priv->rx_index = 0;
> +
> + return 0;
> +}
> +
> +static void rx_descs_init(struct bcmgenet_eth_priv *priv)
> +{
> + char *rxbuffs = &priv->rxbuffer[0];
> + u32 len_stat, i;
> + void *desc_base = priv->rx_desc_base;
> +
> + priv->c_index = 0;
> +
> + len_stat = (RX_BUF_LENGTH << DMA_BUFLENGTH_SHIFT) | DMA_OWN;
> +
> + for (i = 0; i < RX_DESCS; i++) {
> + writel(lower_32_bits((uintptr_t)&rxbuffs[i * RX_BUF_LENGTH]),
> + desc_base + i * DMA_DESC_SIZE + DMA_DESC_ADDRESS_LO);
> + writel(upper_32_bits((uintptr_t)&rxbuffs[i * RX_BUF_LENGTH]),
> + desc_base + i * DMA_DESC_SIZE + DMA_DESC_ADDRESS_HI);
> + writel(len_stat,
> + desc_base + i * DMA_DESC_SIZE + DMA_DESC_LENGTH_STATUS);
> + }
> +}
> +
> +static void rx_ring_init(struct bcmgenet_eth_priv *priv)
> +{
> + writel(DMA_MAX_BURST_LENGTH,
> + priv->mac_reg + RDMA_REG_BASE + DMA_SCB_BURST_SIZE);
> +
> + writel(0x0, priv->mac_reg + RDMA_RING_REG_BASE + DMA_START_ADDR);
> + writel(0x0, priv->mac_reg + RDMA_READ_PTR);
> + writel(0x0, priv->mac_reg + RDMA_WRITE_PTR);
> + writel(RX_DESCS * DMA_DESC_SIZE / 4 - 1,
> + priv->mac_reg + RDMA_RING_REG_BASE + DMA_END_ADDR);
> +
> + writel(0x0, priv->mac_reg + RDMA_PROD_INDEX);
> + writel(0x0, priv->mac_reg + RDMA_CONS_INDEX);
> + writel((RX_DESCS << DMA_RING_SIZE_SHIFT) | RX_BUF_LENGTH,
> + priv->mac_reg + RDMA_RING_REG_BASE + DMA_RING_BUF_SIZE);
> + writel(DMA_FC_THRESH_VALUE, priv->mac_reg + RDMA_XON_XOFF_THRESH);
> + writel(1 << DEFAULT_Q, priv->mac_reg + RDMA_REG_BASE + DMA_RING_CFG);
> +}
> +
> +static void tx_ring_init(struct bcmgenet_eth_priv *priv)
> +{
> + writel(DMA_MAX_BURST_LENGTH,
> + priv->mac_reg + TDMA_REG_BASE + DMA_SCB_BURST_SIZE);
> +
> + writel(0x0, priv->mac_reg + TDMA_RING_REG_BASE + DMA_START_ADDR);
> + writel(0x0, priv->mac_reg + TDMA_READ_PTR);
> + writel(0x0, priv->mac_reg + TDMA_WRITE_PTR);
> + writel(TX_DESCS * DMA_DESC_SIZE / 4 - 1,
> + priv->mac_reg + TDMA_RING_REG_BASE + DMA_END_ADDR);
> + writel(0x0, priv->mac_reg + TDMA_PROD_INDEX);
> + writel(0x0, priv->mac_reg + TDMA_CONS_INDEX);
> + writel(0x1, priv->mac_reg + TDMA_RING_REG_BASE + DMA_MBUF_DONE_THRESH);
> + writel(0x0, priv->mac_reg + TDMA_FLOW_PERIOD);
> + writel((TX_DESCS << DMA_RING_SIZE_SHIFT) | RX_BUF_LENGTH,
> + priv->mac_reg + TDMA_RING_REG_BASE + DMA_RING_BUF_SIZE);
> +
> + writel(1 << DEFAULT_Q, priv->mac_reg + TDMA_REG_BASE + DMA_RING_CFG);
> +}
> +
> +static int bcmgenet_adjust_link(struct bcmgenet_eth_priv *priv)
> +{
> + struct phy_device *phy_dev = priv->phydev;
> + u32 speed;
> +
> + switch (phy_dev->speed) {
> + case SPEED_1000:
> + speed = UMAC_SPEED_1000;
> + break;
> + case SPEED_100:
> + speed = UMAC_SPEED_100;
> + break;
> + case SPEED_10:
> + speed = UMAC_SPEED_10;
> + break;
> + default:
> + printf("bcmgenet: Unsupported PHY speed: %d\n", phy_dev->speed);
> + return -EINVAL;
> + }
> +
> + clrsetbits_le32(priv->mac_reg + EXT_RGMII_OOB_CTRL, OOB_DISABLE,
> + RGMII_LINK | RGMII_MODE_EN | ID_MODE_DIS);
> +
> + writel(speed << CMD_SPEED_SHIFT, (priv->mac_reg + UMAC_CMD));
> +
> + return 0;
> +}
> +
> +static int bcmgenet_gmac_eth_start(struct udevice *dev)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + priv->tx_desc_base = priv->mac_reg + GENET_TX_OFF;
> + priv->rx_desc_base = priv->mac_reg + GENET_RX_OFF;
> + priv->tx_index = 0x0;
> + priv->rx_index = 0x0;
> +
> + bcmgenet_umac_reset(priv);
> +
> + bcmgenet_gmac_write_hwaddr(dev);
> +
> + /* Disable RX/TX DMA and flush TX queues */
> + bcmgenet_disable_dma(priv);
> +
> + rx_ring_init(priv);
> + rx_descs_init(priv);
> +
> + tx_ring_init(priv);
> +
> + /* Enable RX/TX DMA */
> + bcmgenet_enable_dma(priv);
> +
> + /* read PHY properties over the wire from generic PHY set-up */
> + ret = phy_startup(priv->phydev);
> + if (ret) {
> + printf("bcmgenet: PHY startup failed: %d\n", ret);
> + return ret;
> + }
> +
> + /* Update MAC registers based on PHY property */
> + ret = bcmgenet_adjust_link(priv);
> + if (ret) {
> + printf("bcmgenet: adjust PHY link failed: %d\n", ret);
> + return ret;
> + }
> +
> + /* Enable Rx/Tx */
> + setbits_le32(priv->mac_reg + UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
> +
> + return 0;
> +}
> +
> +static int bcmgenet_phy_init(struct bcmgenet_eth_priv *priv, void *dev)
> +{
> + struct phy_device *phydev;
> + int ret;
> +
> + phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
> + if (!phydev)
> + return -ENODEV;
> +
> + phydev->supported &= PHY_GBIT_FEATURES;
> + if (priv->speed) {
> + ret = phy_set_supported(priv->phydev, priv->speed);
> + if (ret)
> + return ret;
> + }
> + phydev->advertising = phydev->supported;
> +
> + phy_connect_dev(phydev, dev);
> +
> + priv->phydev = phydev;
> + phy_config(priv->phydev);
> +
> + return 0;
> +}
> +
> +static void bcmgenet_mdio_start(struct bcmgenet_eth_priv *priv)
> +{
> + setbits_le32(priv->mac_reg + MDIO_CMD, MDIO_START_BUSY);
> +}
> +
> +static int bcmgenet_mdio_write(struct mii_dev *bus, int addr, int devad,
> + int reg, u16 value)
> +{
> + struct udevice *dev = bus->priv;
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + u32 val;
> +
> + /* Prepare the read operation */
> + val = MDIO_WR | (addr << MDIO_PMD_SHIFT) |
> + (reg << MDIO_REG_SHIFT) | (0xffff & value);
> + writel_relaxed(val, priv->mac_reg + MDIO_CMD);
> +
> + /* Start MDIO transaction */
> + bcmgenet_mdio_start(priv);
> +
> + return wait_for_bit_le32(priv->mac_reg + MDIO_CMD,
> + MDIO_START_BUSY, false, 20, true);
> +}
> +
> +static int bcmgenet_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
> +{
> + struct udevice *dev = bus->priv;
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + u32 val;
> + int ret;
> +
> + /* Prepare the read operation */
> + val = MDIO_RD | (addr << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
> + writel_relaxed(val, priv->mac_reg + MDIO_CMD);
> +
> + /* Start MDIO transaction */
> + bcmgenet_mdio_start(priv);
> +
> + ret = wait_for_bit_le32(priv->mac_reg + MDIO_CMD,
> + MDIO_START_BUSY, false, 20, true);
> + if (ret)
> + return ret;
> +
> + val = readl_relaxed(priv->mac_reg + MDIO_CMD);
> +
> + return val & 0xffff;
> +}
> +
> +static int bcmgenet_mdio_init(const char *name, struct udevice *priv)
> +{
> + struct mii_dev *bus = mdio_alloc();
> +
> + if (!bus) {
> + debug("Failed to allocate MDIO bus\n");
> + return -ENOMEM;
> + }
> +
> + bus->read = bcmgenet_mdio_read;
> + bus->write = bcmgenet_mdio_write;
> + snprintf(bus->name, sizeof(bus->name), name);
> + bus->priv = (void *)priv;
> +
> + return mdio_register(bus);
> +}
> +
> +/* We only support RGMII (as used on the RPi4). */
> +static int bcmgenet_interface_set(struct bcmgenet_eth_priv *priv)
> +{
> + phy_interface_t phy_mode = priv->interface;
> +
> + switch (phy_mode) {
> + case PHY_INTERFACE_MODE_RGMII:
> + writel(PORT_MODE_EXT_GPHY, priv->mac_reg + SYS_PORT_CTRL);
> + break;
> + default:
> + printf("unknown phy mode: %d\n", priv->interface);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int bcmgenet_eth_probe(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + int offset = dev_of_offset(dev);
> + const char *name;
> + u32 reg;
> + int ret;
> + u8 major;
> +
> + priv->mac_reg = (void *)pdata->iobase;
> + priv->interface = pdata->phy_interface;
> + priv->speed = pdata->max_speed;
> +
> + /* Read GENET HW version */
> + reg = readl_relaxed(priv->mac_reg + SYS_REV_CTRL);
> + major = (reg >> 24) & 0x0f;
> + if (major != 6) {
> + if (major == 5)
> + major = 4;
> + else if (major == 0)
> + major = 1;
> +
> + printf("Unsupported GENETv%d.%d\n", major, (reg >> 16) & 0x0f);
> + return -ENODEV;
> + }
> +
> + ret = bcmgenet_interface_set(priv);
> + if (ret)
> + return ret;
> +
> + offset = fdt_first_subnode(gd->fdt_blob, offset);
> + name = fdt_get_name(gd->fdt_blob, offset, NULL);
> +
> + ret = bcmgenet_mdio_init(name, dev);
> + if (ret)
> + return ret;
> +
> + priv->bus = miiphy_get_dev_by_name(name);
> +
> + return bcmgenet_phy_init(priv, dev);
> +}
> +
> +static void bcmgenet_gmac_eth_stop(struct udevice *dev)
> +{
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> +
> + clrbits_le32(priv->mac_reg + UMAC_CMD, CMD_TX_EN | CMD_RX_EN);
> + clrbits_le32(priv->mac_reg + TDMA_REG_BASE + DMA_CTRL,
> + 1 << (DEFAULT_Q + DMA_RING_BUF_EN_SHIFT) | DMA_EN);
> +}
> +
> +static const struct eth_ops bcmgenet_gmac_eth_ops = {
> + .start = bcmgenet_gmac_eth_start,
> + .write_hwaddr = bcmgenet_gmac_write_hwaddr,
> + .send = bcmgenet_gmac_eth_send,
> + .recv = bcmgenet_gmac_eth_recv,
> + .free_pkt = bcmgenet_gmac_free_pkt,
> + .stop = bcmgenet_gmac_eth_stop,
> +};
> +
> +static int bcmgenet_eth_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct bcmgenet_eth_priv *priv = dev_get_priv(dev);
> + const char *phy_mode;
> + int node = dev_of_offset(dev);
> + int offset;
> +
> + pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
for compatibility with MIPS please remap all physical addresses from DT
to virtual addresses. You can use the existing wrappers like
dev_remap_addr(), dev_remap_addr_index() or dev_remap_addr_name() for that.
> +
> + /* Get phy mode from DT */
> + pdata->phy_interface = -1;
> + phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
> + NULL);
generally you should use the newer DM API for that (see
include/dm/read.h) to get rid of the gd pointer and to be able to use
the live-tree feature. In this case dev_read_string().
> +
> + if (phy_mode)
> + pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> + if (pdata->phy_interface == -1) {
> + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
> + return -EINVAL;
> + }
> +
> + offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
dev_read_phandle_with_args()
> + if (offset > 0) {
> + priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", 0);
> + pdata->max_speed = fdtdec_get_int(gd->fdt_blob, offset,
> + "max-speed", 0);
dev_read_s32() or dev_read_u32()
> + }
> +
> + return 0;
> +}
> +
> +/* The BCM2711 implementation has a limited burst length compared to a generic
> + * GENETv5 version, but we go with that shorter value (8) in both cases, for
> + * the sake of simplicity.
> + */
> +static const struct udevice_id bcmgenet_eth_ids[] = {
> + {.compatible = "brcm,genet-v5"},
> + {.compatible = "brcm,bcm2711-genet-v5"},
> + {}
> +};
> +
> +U_BOOT_DRIVER(eth_bcmgenet) = {
> + .name = "eth_bcmgenet",
> + .id = UCLASS_ETH,
> + .of_match = bcmgenet_eth_ids,
> + .ofdata_to_platdata = bcmgenet_eth_ofdata_to_platdata,
> + .probe = bcmgenet_eth_probe,
> + .ops = &bcmgenet_gmac_eth_ops,
> + .priv_auto_alloc_size = sizeof(struct bcmgenet_eth_priv),
> + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
>
--
- Daniel
More information about the U-Boot
mailing list