[PATCH v2 2/3] doc: rockchip: document packing second level loader with mkimage

[Kever Yang]

On 2019/12/5 下午6:58, Jeffy Chen wrote:
> Add documentation about packing optional second level boot-loader with
> mkimage tool.
>
> Signed-off-by: Jeffy Chen <jeffy.chen at rock-chips.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>
> Changes in v2: None
>
>   doc/README.rockchip | 11 +++++++++++
>   1 file changed, 11 insertions(+)
>
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 67c14006a3..39dc9c5e9f 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -341,6 +341,12 @@ You can create the image via the following operations:
>      cat firefly-rk3288/u-boot-dtb.bin >> out && \
>      sudo dd if=out of=/dev/sdc seek=64
>   
> +Or:
> +   ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
> +	firefly-rk3288/spl/u-boot-spl-dtb.bin:firefly-rk3288/u-boot-dtb.bin \
> +	out && \
> +   sudo dd if=out of=/dev/sdc seek=64
> +
>   If you have an HDMI cable attached you should see a video console.
>   
>   For evb_rk3036 board:
> @@ -348,6 +354,11 @@ For evb_rk3036 board:
>   	cat evb-rk3036/u-boot-dtb.bin >> out && \
>   	sudo dd if=out of=/dev/sdc seek=64
>   
> +Or:
> +	./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d \
> +		evb-rk3036/spl/u-boot-spl.bin:evb-rk3036/u-boot-dtb.bin out && \
> +	sudo dd if=out of=/dev/sdc seek=64
> +
>   Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
>         debug uart must be disabled
>