[U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs

Chee, Tien Fong tien.fong.chee at intel.com
Tue Jan 1 03:39:11 UTC 2019


On Sun, 2018-12-30 at 16:51 +0100, Marek Vasut wrote:
> On 12/30/18 9:13 AM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > 
> > Add support for loading FPGA bitstream to get DDR up running before
> > U-Boot is loaded into DDR. Boot device initialization, generic
> > firmware
> > loader and SPL FAT support are required for this whole mechanism to
> > work.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > ---
> >  arch/arm/mach-socfpga/spl_a10.c |   46
> > ++++++++++++++++++++++++++++++++++++++-
> >  1 files changed, 45 insertions(+), 1 deletions(-)
> > 
> > diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-
> > socfpga/spl_a10.c
> > index 3ea64f7..93f5f46 100644
> > --- a/arch/arm/mach-socfpga/spl_a10.c
> > +++ b/arch/arm/mach-socfpga/spl_a10.c
> > @@ -1,6 +1,6 @@
> >  // SPDX-License-Identifier: GPL-2.0+
> >  /*
> > - *  Copyright (C) 2012 Altera Corporation <www.altera.com>
> > + *  Copyright (C) 2012-2018 Altera Corporation <www.altera.com>
> >   */
> >  
> >  #include <common.h>
> > @@ -23,9 +23,14 @@
> >  #include <fdtdec.h>
> >  #include <watchdog.h>
> >  #include <asm/arch/pinmux.h>
> > +#include <asm/arch/fpga_manager.h>
> > +#include <mmc.h>
> >  
> >  DECLARE_GLOBAL_DATA_PTR;
> >  
> > +#define FPGA_SOCFGA_A10_RBF_CORE_LOAD_DDR	(1 * 1024)
> > +#define FPGA_SOCFGA_A10_RBF_CORE_BUFFER_SIZE	(40 * 1024 *
> > 1024)
> > +
> >  static const struct socfpga_system_manager *sysmgr_regs =
> >  	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> >  
> > @@ -73,6 +78,45 @@ void spl_board_init(void)
> >  	WATCHDOG_RESET();
> >  
> >  	arch_early_init_r();
> > +
> > +	/* If the full FPGA is already loaded, ie.from EPCQ,
> > config fpga pins */
> > +	if (is_fpgamgr_user_mode()) {
> > +		config_pins(gd->fdt_blob, "shared");
> > +		config_pins(gd->fdt_blob, "fpga");
> What happens if config_pins() fails ? The function returns some
> return
> value.
There is return value for config_pins, i can add the debug print out
for the return value.
> 
> > 
> > +	} else if (!is_fpgamgr_early_user_mode()) {
> > +		/* Program IOSSM(early IO release) or full FPGA */
> > +		fpga_fs_info fpga_fsinfo;
> > +		int len;
> > +		char buf[16 * 1024] __aligned(ARCH_DMA_MINALIGN);
> > +
> > +		fpga_fsinfo.filename = (char *)get_fpga_filename(
> Is the cast needed ?
there is a warning 
arch/arm/mach-socfpga/spl_a10.c:109:24: warning: assignment discards
'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
   fpga_fsinfo.filename = get_fpga_filename(
> 
> > 
> > +						gd->fdt_blob,
> > +						&len,
> > +						FPGA_SOCFPGA_A10_R
> > BF_PERIPH);
> > +
> > +		if (fpga_fsinfo.filename)
> > +			socfpga_loadfs(&fpga_fsinfo, buf,
> > sizeof(buf), 0);
> > +	}
> > +
> > +	/* If the IOSSM/full FPGA is already loaded, start DDR */
> > +	if (is_fpgamgr_early_user_mode() ||
> > is_fpgamgr_user_mode())
> > +		ddr_calibration_sequence();
> > +
> > +	if (!is_fpgamgr_user_mode()) {
> > +		fpga_fs_info fpga_fsinfo;
> > +		int len;
> > +
> > +		fpga_fsinfo.filename = (char *)get_fpga_filename(
> > +						gd->fdt_blob,
> > +						&len,
> > +						FPGA_SOCFPGA_A10_R
> > BF_CORE);
> > +
> > +		if (fpga_fsinfo.filename)
> > +			socfpga_loadfs(&fpga_fsinfo,
> > +				(const void
> > *)FPGA_SOCFGA_A10_RBF_CORE_LOAD_DDR,
> > +				(size_t)FPGA_SOCFGA_A10_RBF_CORE_B
> > UFFER_SIZE,
> > +				0);
> > +	}
> >  }
> >  
> >  void board_init_f(ulong dummy)
> > 
> 


More information about the U-Boot mailing list