January 2019 Archives by author
Starting: Tue Jan 1 02:52:38 UTC 2019
Ending: Thu Jan 31 23:40:36 UTC 2019
Messages: 3988
- [U-Boot] [PATCH] configs: Enable CONFIG_BLK in a few TI boards
Faiz Abbas
- [U-Boot] [PATCH] configs: Remove am335x_boneblack_defconfig
Faiz Abbas
- [U-Boot] [PATCH 00/13] Add Support for eMMC in AM65x-evm
Faiz Abbas
- [U-Boot] [PATCH 01/13] arm64: dts: k3: Sync sdhci0 node from kernel
Faiz Abbas
- [U-Boot] [PATCH 02/13] mmc: am654_mmc: Change driver name
Faiz Abbas
- [U-Boot] [PATCH 03/13] mmc: am654_sdhci: Remove quirks
Faiz Abbas
- [U-Boot] [PATCH 04/13] regmap: Add API regmap_init_mem_index()
Faiz Abbas
- [U-Boot] [PATCH 05/13] regmap: Add support for polling on a register
Faiz Abbas
- [U-Boot] [PATCH 06/13] mmc: sdhci: Add support for sdhci-caps-mask
Faiz Abbas
- [U-Boot] [PATCH 07/13] mmc: sdhci: Make sdhci_set_clock() non static
Faiz Abbas
- [U-Boot] [PATCH 08/13] arm: dts: k3: Add phy specific properties to SD card node
Faiz Abbas
- [U-Boot] [PATCH 09/13] mmc: sdhci: Make set_ios_post() return int
Faiz Abbas
- [U-Boot] [PATCH 10/13] mmc: am654_sdhci: Add Support for PHY
Faiz Abbas
- [U-Boot] [PATCH 11/13] configs: am65x_evm: Enable CONFIG_REGMAP
Faiz Abbas
- [U-Boot] [PATCH 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Faiz Abbas
- [U-Boot] [PATCH 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Faiz Abbas
- [U-Boot] [PATCH 09/13] mmc: sdhci: Make set_ios_post() return int
Faiz Abbas
- [U-Boot] [PATCH 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Faiz Abbas
- [U-Boot] configs: Enable CONFIG_BLK in a few TI boards
Faiz Abbas
- [U-Boot] [PATCH] mmc: omap_hsmmc: Workaround errata regarding SDR104/HS200 tuning failures (i929)
Faiz Abbas
- [U-Boot] [PATCH 1/1] LX2160AQDS: Adds SECURE_BOOT defconfig.
Udit Agarwal
- [U-Boot] [PATCH 1/1] LX2160AQDS: Adds SECURE_BOOT defconfig.
Udit Agarwal
- [U-Boot] [PATCH] MTD: nand: mxs_nand_spl: Fix empty function pointer for BBT
Stefan Agner
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Stefan Agner
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefan Agner
- [U-Boot] [PATCH v1 0/9] arm: Colibri iMX7 fixes and DM_MMC conversion
Stefan Agner
- [U-Boot] [PATCH v1 1/9] colibri_imx7: fix boot commands
Stefan Agner
- [U-Boot] [PATCH v1 2/9] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
Stefan Agner
- [U-Boot] [PATCH v1 3/9] configs: colibri_imx7: enable DM for raw NAND devices
Stefan Agner
- [U-Boot] [PATCH v1 4/9] configs: colibri_imx7: use separate device tree
Stefan Agner
- [U-Boot] [PATCH v1 5/9] arm: dts: imx7: colibri: add usdhci peripherals to device tree
Stefan Agner
- [U-Boot] [PATCH v1 6/9] configs: colibri_imx7: use DM_MMC
Stefan Agner
- [U-Boot] [PATCH v1 7/9] colibri_imx7: drop legacy usdhc support
Stefan Agner
- [U-Boot] [PATCH v1 8/9] configs: colibri_imx7: enable CAAM driver
Stefan Agner
- [U-Boot] [PATCH v1 9/9] configs: add default configuraiton for Colibri iMX7 with eMMC
Stefan Agner
- [U-Boot] [PATCH v1 2/9] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
Stefan Agner
- [U-Boot] [PATCH v1 3/9] configs: colibri_imx7: enable DM for raw NAND devices
Stefan Agner
- [U-Boot] [PATCH v1 9/9] configs: add default configuraiton for Colibri iMX7 with eMMC
Stefan Agner
- [U-Boot] [PATCH v2 00/11] arm: Colibri iMX7 fixes and DM_MMC conversion
Stefan Agner
- [U-Boot] [PATCH v2 01/11] colibri_imx7: fix boot commands
Stefan Agner
- [U-Boot] [PATCH v2 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
Stefan Agner
- [U-Boot] [PATCH v2 03/11] configs: colibri_imx7: enable DM for raw NAND devices
Stefan Agner
- [U-Boot] [PATCH v2 04/11] configs: colibri_imx7: use separate device tree
Stefan Agner
- [U-Boot] [PATCH v2 05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree
Stefan Agner
- [U-Boot] [PATCH v2 06/11] configs: colibri_imx7: use DM_MMC
Stefan Agner
- [U-Boot] [PATCH v2 07/11] colibri_imx7: drop legacy usdhc support
Stefan Agner
- [U-Boot] [PATCH v2 08/11] configs: colibri_imx7: enable CAAM driver
Stefan Agner
- [U-Boot] [PATCH v2 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC
Stefan Agner
- [U-Boot] [PATCH v2 10/11] configs: colibri_imx7: use distro defaults
Stefan Agner
- [U-Boot] [PATCH v2 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC
Stefan Agner
- [U-Boot] [PATCH 0/4] Support nds32 pre-build toolchain
Andes
- [U-Boot] [PATCH 1/4] .travis.yml: Support nds32 prebuilt toolchain
Andes
- [U-Boot] [PATCH 2/4] nds32: Remove gcc unused option
Andes
- [U-Boot] [PATCH 3/4] nds32: Generate SW fpu instruction.
Andes
- [U-Boot] [PATCH 4/4] nds32: Fix boot fail issue when build with elf-mculib.
Andes
- [U-Boot] [PATCH] nds32: dts: Fix mmc node compatible string
Andes
- [U-Boot] [PATCH u-boot 0/2] net: designware: add meson meson compatibles
Neil Armstrong
- [U-Boot] [PATCH u-boot] pinctrl: meson: add pinconf support
Neil Armstrong
- [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH v3 1/5] mtd: sf_probe: add jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v3 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v3 3/5] x86: dts: switch spi-flash to jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v3 4/5] mtd: sf_probe: remove spi-flash compatible
Neil Armstrong
- [U-Boot] [PATCH v3 5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor
Neil Armstrong
- [U-Boot] [PATCH u-boot 00/11] meson: add support for Video Output
Neil Armstrong
- [U-Boot] [PATCH u-boot 01/11] power: domain: meson-gx-pwrc-vpu: add missing depends
Neil Armstrong
- [U-Boot] [PATCH u-boot 02/11] video: dw_hdmi: support SoC specific read/write ops
Neil Armstrong
- [U-Boot] [PATCH u-boot 03/11] video: dw_hdmi: add support for color conversion
Neil Armstrong
- [U-Boot] [PATCH u-boot 04/11] video: Add Meson Video Processing Unit Driver
Neil Armstrong
- [U-Boot] [PATCH u-boot 05/11] arm64: dts: meson-gx: vpu should be probed before relocation
Neil Armstrong
- [U-Boot] [PATCH u-boot 06/11] arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
Neil Armstrong
- [U-Boot] [PATCH u-boot 07/11] arm64: dts: meson-gx: add hhi reg entry to hdmi_tx
Neil Armstrong
- [U-Boot] [PATCH u-boot 08/11] arm: meson: board-gx: Setup VPU in fdt
Neil Armstrong
- [U-Boot] [PATCH u-boot 09/11] configs: meson64: use vidconsole and usbkbd if enabled
Neil Armstrong
- [U-Boot] [PATCH u-boot 10/11] arm: meson64: enable console mux and console env by default
Neil Armstrong
- [U-Boot] [PATCH u-boot 11/11] arm: libretech-cc: enable video by default
Neil Armstrong
- [U-Boot] board/amlogic/odroid-c2/README - how to make the instructions more portable?
Neil Armstrong
- [U-Boot] [PATCH u-boot 00/11] meson: add support for Video Output
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190128
Neil Armstrong
- [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH u-boot 04/11] video: Add Meson Video Processing Unit Driver
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190128
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190129
Neil Armstrong
- [U-Boot] [PATCH u-boot] MAINTAINERS: Add Amlogic entry
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190129
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190131
Neil Armstrong
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Auer, Lukas
- [U-Boot] [PATCH v2 0/7] Small fixes for RISC-V
Lukas Auer
- [U-Boot] [PATCH v2 1/7] riscv: clarify error message on undefined exceptions
Lukas Auer
- [U-Boot] [PATCH v2 2/7] riscv: move the AX25-specific implementation of flush_dcache_all
Lukas Auer
- [U-Boot] [PATCH v2 3/7] riscv: use invalidate/flush_*cache_range functions in cache.c
Lukas Auer
- [U-Boot] [PATCH v2 4/7] riscv: remove RISC-V standalone linker script
Lukas Auer
- [U-Boot] [PATCH v2 5/7] riscv: replace use of callee-saved register in standalone
Lukas Auer
- [U-Boot] [PATCH v2 6/7] riscv: support standalone applications on RV64I systems
Lukas Auer
- [U-Boot] [PATCH v2 7/7] riscv: qemu: define standalone load address
Lukas Auer
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Auer, Lukas
- [U-Boot] [PATCH 1/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Auer, Lukas
- [U-Boot] [PATCH v2 01/11] riscv: Rename cpu/qemu to cpu/generic
Auer, Lukas
- [U-Boot] [PATCH v2 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Auer, Lukas
- [U-Boot] [PATCH v2 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Auer, Lukas
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Auer, Lukas
- [U-Boot] [PATCH v2 06/11] clk: Add SiFive FU540 PRCI clock driver
Auer, Lukas
- [U-Boot] [PATCH v2 08/11] drivers: serial_sifive: Fix baud rate calculation
Auer, Lukas
- [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock
Auer, Lukas
- [U-Boot] [PATCH v2 10/11] cpu: Bind timer driver for boot hart
Auer, Lukas
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Auer, Lukas
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Auer, Lukas
- [U-Boot] [PATCH v2 06/11] clk: Add SiFive FU540 PRCI clock driver
Auer, Lukas
- [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock
Auer, Lukas
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Auer, Lukas
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Auer, Lukas
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Auer, Lukas
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181217
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
Stefano Babic
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Stefano Babic
- [U-Boot] [PATCH 0/5] imx8: several fixes
Stefano Babic
- [U-Boot] [PATCH 0/5] imx8: several fixes
Stefano Babic
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
Stefano Babic
- [U-Boot] [PATCH 0/5] imx8: several fixes
Stefano Babic
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
Stefano Babic
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190110
Stefano Babic
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefano Babic
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefano Babic
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Stefano Babic
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Stefano Babic
- [U-Boot] [PATCH] QSPI flash driver compatibility fixes for mx6ull
Stefano Babic
- [U-Boot] [PATCH 1/1] tools: imx8image: use correct printf escape sequence
Stefano Babic
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Stefano Babic
- [U-Boot] [PATCH] Kconfig: don't pollute Kconfig w/ i.MX8M options for everyone
Stefano Babic
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Stefano Babic
- [U-Boot] [PATCH] imx: Check the PL310 version for applying errata
Stefano Babic
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190129
Stefano Babic
- [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable
Stefano Babic
- [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable
Stefano Babic
- [U-Boot] Problems to build i.MX8MQ EVK board
Stefano Babic
- [U-Boot] [PATCH] arm: ti: boot: Remove legacy Android partitions
Bajjuri, Praneeth
- [U-Boot] [PATCH] arm: ti: boot: Fix am57xx evm fdtfile name
Praneeth Bajjuri
- [U-Boot] [PATCH 0/2] Make nyan-big working..
Tristan Bastian
- [U-Boot] [PATCH 1/2] nyan-big: change spi delay
Tristan Bastian
- [U-Boot] [PATCH 2/2] nyan-big: add padding to its file
Tristan Bastian
- [U-Boot] [PATCH 1/6] watchdog: bcm6345: switch to raw I/O functions
Marek Behun
- [U-Boot] [PATCH 11/11] riscv: Add SiFive FU540 board support
Troy Benjegerdes
- [U-Boot] [PATCH 0/2] update TFABOOT defconfigs for SD boot support
Rajesh Bhagat
- [U-Boot] [PATCH 1/2] env: fix allow to build multiple environments
Rajesh Bhagat
- [U-Boot] [PATCH 2/2] configs: update TFABOOT defconfigs for SD boot support
Rajesh Bhagat
- [U-Boot] [PATCH] armv7: dts: ls1021a: Remove aliases property name warning
Rajesh Bhagat
- [U-Boot] [PATCH 1/2] env: fix allow to build multiple environments
Rajesh Bhagat
- [U-Boot] [RESEND PATCH 0/2] update TFABOOT defconfigs for SD boot support
Rajesh Bhagat
- [U-Boot] [RESEND PATCH 1/2] env: fix allow to build multiple environments
Rajesh Bhagat
- [U-Boot] [RESEND PATCH 2/2] configs: update TFABOOT defconfigs for SD boot support
Rajesh Bhagat
- [U-Boot] [PATCH 1/2] armv8: ls1088ardb: Update MAINTAINERS
Rajesh Bhagat
- [U-Boot] [PATCH 2/2] armv8: ls2088ardb: Update MAINTAINERS
Rajesh Bhagat
- [U-Boot] [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config
Rajesh Bhagat
- [U-Boot] [PATCH] armv8: layerscape: move TZASC and TZPC configs to Kconfig
Rajesh Bhagat
- [U-Boot] [PATCH] armv8: layerscape: move CONFIG_LAYERSCAPE to Kconfig
Rajesh Bhagat
- [U-Boot] [upstream-release] [PATCH] pci: layerscape: add option to statically allocate PCI StreamIDs
Bharat Bhushan
- [U-Boot] [upstream-release] [PATCH 1/3] fsl_sec: fix register layout on Layerscape architectures
Bharat Bhushan
- [U-Boot] [upstream-release] [PATCH 3/3] armv8: fsl-layerscape: avoid DT fixup warning
Bharat Bhushan
- [U-Boot] [edk2] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Bi, Dandan
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Ard Biesheuvel
- [U-Boot] [PATCH] efi_loader: Patch non-runtime code out at ExitBootServices already
Ard Biesheuvel
- [U-Boot] [PATCH] arm: am335x-pdu001: Remove SPI support
Felix Brack
- [U-Boot] [PATCH] arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2
Felix Brack
- [U-Boot] [PATCH] dts: am335x-pdu001: Fix polarity of card detection input
Felix Brack
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Felix Brack
- [U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers
Boris Brezillon
- [U-Boot] [Bug?] raspberrypi: UART issue in combination with pi3-disable-bt device-tree overlay
Orne Brocaar
- [U-Boot] [PATCH] serial: Get rid of CONFIG_DW_SERIAL
Alexey Brodkin
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Alexey Brodkin
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Alexey Brodkin
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Alexey Brodkin
- [U-Boot] [PATCH] serial: Get rid of CONFIG_DW_SERIAL
Alexey Brodkin
- [U-Boot] [PATCH v3 01/10] Convert CONFIG_BOARD_TYPES to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH v2] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH] serial_arc: Allocate buffer for private data
Alexey Brodkin
- [U-Boot] [PATCH] ARC: Fix iteration in arc_xx_version()
Alexey Brodkin
- [U-Boot] [PATCH] ARC: cache: define CONFIG_SYS_CACHELINE_SIZE as ARCH_DMA_MINALIGN
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH u-boot] pinctrl: meson: add pinconf support
Jerome Brunet
- [U-Boot] [PATCH 1/1] altera_pio: fix get_value
Julien Béraud
- [U-Boot] [PATCH 1/1] altera_pio: fix get_value
Julien Béraud
- [U-Boot] [PATCH v2 1/1] altera_pio: fix get_value
Julien Béraud
- [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value
Julien Béraud
- [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value
Julien Béraud
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Patrice CHOTARD
- [U-Boot] [PATCH 1/1] efi_loader: CMD_BOOTEFI_HELLO_COMPILE in configs
Patrice CHOTARD
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Patrice CHOTARD
- [U-Boot] [PATCH v3 3/7] MSCC: Add device tree for Jaguar2 board
Gregory CLEMENT
- [U-Boot] [PATCH v4 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Gregory CLEMENT
- [U-Boot] [PATCH 0/4] Add network support for Ocelots SoCs
Gregory CLEMENT
- [U-Boot] [PATCH 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Gregory CLEMENT
- [U-Boot] [PATCH 2/4] net: add MSCC Ocelot switch support
Gregory CLEMENT
- [U-Boot] [PATCH 3/4] MIPS: mscc: ocelot: add switch reset support
Gregory CLEMENT
- [U-Boot] [PATCH 4/4] configs: mscc_ocelot: add network support
Gregory CLEMENT
- [U-Boot] [PATCH v2 0/4] Add network support for Ocelots SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v2 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Gregory CLEMENT
- [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support
Gregory CLEMENT
- [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support
Gregory CLEMENT
- [U-Boot] [PATCH v2 4/4] configs: mscc_ocelot: add network support
Gregory CLEMENT
- [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support
Gregory CLEMENT
- [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support
Gregory CLEMENT
- [U-Boot] [PATCH v3 0/4] Add network support for Ocelots SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v3 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Gregory CLEMENT
- [U-Boot] [PATCH v3 2/4] net: add MSCC Ocelot switch support
Gregory CLEMENT
- [U-Boot] [PATCH v3 3/4] MIPS: mscc: ocelot: add switch reset support
Gregory CLEMENT
- [U-Boot] [PATCH v3 4/4] configs: mscc_ocelot: add network support
Gregory CLEMENT
- [U-Boot] [PATCH 2/3] net: add MSCC Luton switch support
Gregory CLEMENT
- [U-Boot] [PATCH u-boot] net: phy: realtek: Add functions to read PHY's extended registers
Carlo Caione
- [U-Boot] [PATCH u-boot 0/2] Add MMD PHY helpers
Carlo Caione
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH u-boot 2/2] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v2 0/3] Add MMD PHY helpers
Carlo Caione
- [U-Boot] [PATCH v2 1/3] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v2 2/3] net: phy: ti: use generic helpers to access MMD registers
Carlo Caione
- [U-Boot] [PATCH v2 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH] net: phy: realtek: Introduce quirk to mark RXC not stoppable
Carlo Caione
- [U-Boot] [PATCH v3 0/3] Add MMD PHY helpers
Carlo Caione
- [U-Boot] [PATCH v3 1/3] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v3 2/3] net: phy: ti: use generic helpers to access MMD registers
Carlo Caione
- [U-Boot] [PATCH v3 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH] net: phy: realtek: Introduce quirk to mark RXC not stoppable
Carlo Caione
- [U-Boot] [PATCH v3 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v2] net: phy: realtek: Introduce quirk to mark RXC not stoppable
Carlo Caione
- [U-Boot] [PATCH v4 0/3] Add MMD PHY helpers
Carlo Caione
- [U-Boot] [PATCH v4 1/3] net: phy: Add support for accessing MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 2/3] net: phy: ti: use generic helpers to access MMD registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH] Fix typo: missmatched -> mismatched.
Vagrant Cascadian
- [U-Boot] [PATCH] fpga: zynqmp: show an error message when FPGA programming fails
Luca Ceresoli
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
Chee, Tien Fong
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2] misc: fs_loader: Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2] misc: fs_loader: Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Chee, Tien Fong
- [U-Boot] [PATCH] spl: fat/fs: Add control to build FS EXT4 in SPL
Chee, Tien Fong
- [U-Boot] [PATCH 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [PATCH 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
Chee, Tien Fong
- [U-Boot] [PATCH] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Chee, Tien Fong
- [U-Boot] [PATCH v3] misc: fs_loader: Add support for initializing block device
Chee, Tien Fong
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Rick Chen
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Rick Chen
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Rick Chen
- [U-Boot] [PATCH v2 2/7] riscv: move the AX25-specific implementation of flush_dcache_all
Rick Chen
- [U-Boot] [PATCH v2 3/7] riscv: use invalidate/flush_*cache_range functions in cache.c
Rick Chen
- [U-Boot] [PATCH v3 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Rick Chen
- [U-Boot] [PATCH v3 5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor
Rick Chen
- [U-Boot] [PATCH v1 0/2] stm32f7 gpio driver fixes
Patrice Chotard
- [U-Boot] [PATCH v1 1/2] gpio: stm32f7: Fix gpio bank hole management
Patrice Chotard
- [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size
Patrice Chotard
- [U-Boot] [PATCH] configs: stm32: Remove CONFIG_OF_EMBED
Patrice Chotard
- [U-Boot] [PATCH] api: storage: Add the missing write operation support
Cristian Ciocaltea
- [U-Boot] [PATCH] atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot
Greg Czerniak
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Patrick DELAUNAY
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Patrick DELAUNAY
- [U-Boot] [U-Boot, PATCHv1] arm: stm32mp1: deploy spl in root folder
Patrick DELAUNAY
- [U-Boot] U-Boot and USB 3.0
DJM-Avalesta
- [U-Boot] U-Boot and USB 3.0
DJM-Avalesta
- [U-Boot] [PATCH v2 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Andrew F. Davis
- [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Andrew F. Davis
- [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Andrew F. Davis
- [U-Boot] [PATCH v3 0/7] Add USB boot to HS DRA7xx/AM57xx
Andrew F. Davis
- [U-Boot] [PATCH v3 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Andrew F. Davis
- [U-Boot] [PATCH v3 2/7] dfu: Make DFU support more SPL friendly
Andrew F. Davis
- [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL
Andrew F. Davis
- [U-Boot] [PATCH v3 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Andrew F. Davis
- [U-Boot] [PATCH v3 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Andrew F. Davis
- [U-Boot] [PATCH v3 6/7] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support
Andrew F. Davis
- [U-Boot] [PATCH v3 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Andrew F. Davis
- [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Andrew F. Davis
- [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL
Andrew F. Davis
- [U-Boot] [PATCH v4 0/5] Add USB boot to HS DRA7xx/AM57xx
Andrew F. Davis
- [U-Boot] [PATCH v4 1/5] defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs
Andrew F. Davis
- [U-Boot] [PATCH v4 2/5] defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs
Andrew F. Davis
- [U-Boot] [PATCH v4 3/5] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Andrew F. Davis
- [U-Boot] [PATCH v4 4/5] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support
Andrew F. Davis
- [U-Boot] [PATCH v4 5/5] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Andrew F. Davis
- [U-Boot] [U-Boot, v3, 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Andrew F. Davis
- [U-Boot] common/board_f.c: init_sequence_f_r used for which arches?
Robert P. J. Day
- [U-Boot] should "BUILD_DIR" say "KBUILD_OUTPUT" in manual?
Robert P. J. Day
- [U-Boot] [PATCH] Makefile: have "make distclean" remove CHANGELOG
Robert P. J. Day
- [U-Boot] [PATCH] MAINTAINERS: update stm32mp1 path for arch
Patrick Delaunay
- [U-Boot] [PATCH v3 0/1] Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH] arm: stm32mp1: deploy spl in root folder
Patrick Delaunay
- [U-Boot] [PATCH 0/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH 1/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH 2/3] stm32mp1: bsec: access with SMC for trusted boot
Patrick Delaunay
- [U-Boot] [PATCH 3/3] stm32mp1: display board information
Patrick Delaunay
- [U-Boot] [PATCH 0/7] stm32mp1: update clock driver
Patrick Delaunay
- [U-Boot] [PATCH 1/7] clk: stm32mp1: no more get ck_usbo_48m in device tree
Patrick Delaunay
- [U-Boot] [PATCH 2/7] clk: stm32mp1: add IPCC clock
Patrick Delaunay
- [U-Boot] [PATCH 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR
Patrick Delaunay
- [U-Boot] [PATCH 4/7] clk: stm32mp1: recalculate counter when switching freq
Patrick Delaunay
- [U-Boot] [PATCH 5/7] clk: stm32mp1: add debug information
Patrick Delaunay
- [U-Boot] [PATCH 6/7] dts: stm32mp1: clock tree update
Patrick Delaunay
- [U-Boot] [PATCH 7/7] clk: stm32mp1: correctly handle Clock Spreading Generator
Patrick Delaunay
- [U-Boot] imx7d SPL driver fails to allocate memory.
Rens Dol
- [U-Boot] imx7d SPL driver fails to allocate memory.
Rens Dol
- [U-Boot] (no subject)
Angelo Dureghello
- [U-Boot] [RESEND PATCH] drivers: esdhc: add support for ColdFire mcf5441x family
Angelo Dureghello
- [U-Boot] RK3399/RK3288 same-as-spl Option
Wadim Egorov
- [U-Boot] RK3399/RK3288 same-as-spl Option
Wadim Egorov
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Laszlo Ersek
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Laszlo Ersek
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Laszlo Ersek
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Laszlo Ersek
- [U-Boot] [PATCH v2] mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
Fabio Estevam
- [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Move file system options to Kconfig
Fabio Estevam
- [U-Boot] [PATCH] imx: hab: Convert non-NULL IVT DCD pointer warning to an error
Fabio Estevam
- [U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files
Fabio Estevam
- [U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files
Fabio Estevam
- [U-Boot] [RFC 13/17] mx6sabresd: Add DM_GPIO support
Fabio Estevam
- [U-Boot] [RFC 07/17] dts: imx: Add imx6q-sabreauto dts and imx6qdl-sabreauto dtsi files
Fabio Estevam
- [U-Boot] Problems to boot i.MX8QXP EVK board
Fabio Estevam
- [U-Boot] Problems to boot i.MX8QXP EVK board
Fabio Estevam
- [U-Boot] Problems to boot i.MX8QXP EVK board
Fabio Estevam
- [U-Boot] Problems to boot i.MX8QXP EVK board
Fabio Estevam
- [U-Boot] [PATCH] Revert "tools: imx8image: set dcd_skip to true"
Fabio Estevam
- [U-Boot] [PATCH 00/26] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support
Fabio Estevam
- [U-Boot] [PATCH 11/26] arm: dts: Add imx6q-sabreauto dts file
Fabio Estevam
- [U-Boot] [RESEND] [PATCH v3 0/8] Convert i.MX7 WaRP7 ports to DM
Fabio Estevam
- [U-Boot] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Fabio Estevam
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Fabio Estevam
- [U-Boot] [PATCH] MAINTAINERS: imx: Change Fabio's email address
Fabio Estevam
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Fabio Estevam
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Fabio Estevam
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Fabio Estevam
- [U-Boot] no DTB with nand SPL on sama5d3
Daniel Evans
- [U-Boot] no DTB with nand SPL on sama5d3
Daniel Evans
- [U-Boot] no DTB with nand SPL on sama5d3
Daniel Evans
- [U-Boot] no DTB with nand SPL on sama5d3
Daniel Evans
- [U-Boot] no DTB with nand SPL on sama5d3
Daniel Evans
- [U-Boot] [PATCH 0/5] imx8: several fixes
Peng Fan
- [U-Boot] [PATCH] Kconfig: don't pollute Kconfig w/ i.MX8M options for everyone
Peng Fan
- [U-Boot] booting optee via SPL on imx6q
Peng Fan
- [U-Boot] [PATCH] pinctrl: imx: Fix select input issue
Peng Fan
- [U-Boot] [PATCH] imx: video: Fix return value issue
Peng Fan
- [U-Boot] booting optee via SPL on imx6q
Peng Fan
- [U-Boot] booting optee via SPL on imx6q
Peng Fan
- [U-Boot] [PATCH 1/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Peng Fan
- [U-Boot] [PATCH 2/8] arm: imx7s-warp: Add DT file hooks
Peng Fan
- [U-Boot] [PATCH 3/8] arm: imx7s-warp: Convert to DM MMC initialization
Peng Fan
- [U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports
Peng Fan
- [U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports
Peng Fan
- [U-Boot] [PATCH 7/8] warp7: defconfig: Switch to DM for I2C
Peng Fan
- [U-Boot] [PATCH 8/8] arm: imx7s-warp: Convert to DM PMIC
Peng Fan
- [U-Boot] [PATCH] Fix typo: missmatched -> mismatched.
Peng Fan
- [U-Boot] [PATCH 0/5] imx8: several fixes
Peng Fan
- [U-Boot] Problems to boot i.MX8QXP EVK board
Peng Fan
- [U-Boot] Problems to boot i.MX8QXP EVK board
Peng Fan
- [U-Boot] Problems to boot i.MX8QXP EVK board
Peng Fan
- [U-Boot] [PATCH] imx8: cpu: restrict checking ROM passover info for revA
Peng Fan
- [U-Boot] Problems to boot i.MX8QXP EVK board
Peng Fan
- [U-Boot] Problems to boot i.MX8QXP EVK board
Peng Fan
- [U-Boot] [PATCH] Revert "tools: imx8image: set dcd_skip to true"
Peng Fan
- [U-Boot] [PATCH 00/20] imx: add i.MX8MM support
Peng Fan
- [U-Boot] [PATCH 01/20] imx: add IMX8MM kconfig entry
Peng Fan
- [U-Boot] [PATCH 02/20] imx8: cpu: restrict checking ROM passover info for revA
Peng Fan
- [U-Boot] [PATCH 03/20] imx: imx8mm: add clock bindings header
Peng Fan
- [U-Boot] [PATCH 04/20] imx: add pin binding header for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 05/20] imx: add i.MX8MM cpu type
Peng Fan
- [U-Boot] [PATCH 06/20] imx8m: update imx-regs for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 07/20] imx: add get_cpu_rev support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 08/20] imx8m: rename clock to clock_imx8mq
Peng Fan
- [U-Boot] [PATCH 09/20] imx8m: restructure clock.h
Peng Fan
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 11/20] imx8m: add pin header for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 12/20] imx: add i.MX8MM PE property
Peng Fan
- [U-Boot] [PATCH 13/20] imx8m: Fix MMU table issue for OPTEE memory
Peng Fan
- [U-Boot] [PATCH 14/20] imx8m: set BYPASS ID SWAP to avoid AXI bus errors
Peng Fan
- [U-Boot] [PATCH 15/20] imx8m: Configure trustzone region 0 for non-secure access
Peng Fan
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 17/20] imx8m: soc: enable SCTR clock before timer init
Peng Fan
- [U-Boot] [PATCH 18/20] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
Peng Fan
- [U-Boot] [PATCH 19/20] pinctrl: add imx8m driver
Peng Fan
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Peng Fan
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Peng Fan
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Peng Fan
- [U-Boot] [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Peng Fan
- [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Peng Fan
- [U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Peng Fan
- [U-Boot] [PATCH v2 07/22] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Peng Fan
- [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Peng Fan
- [U-Boot] [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Peng Fan
- [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its
Peng Fan
- [U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support
Peng Fan
- [U-Boot] [PATCH v2 12/22] configs: mx6sabresd: Add SPL FIT and DM support
Peng Fan
- [U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support
Peng Fan
- [U-Boot] [PATCH v2 14/22] mx6sabresd: Add DM_GPIO support
Peng Fan
- [U-Boot] [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Peng Fan
- [U-Boot] [PATCH v2 16/22] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Peng Fan
- [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code
Peng Fan
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Peng Fan
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Peng Fan
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Peng Fan
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Adam Ford
- [U-Boot] [PATCH] imx6q_logic: Enable MMC booting from SPL
Adam Ford
- [U-Boot] [PATCH] mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED
Adam Ford
- [U-Boot] [PATCH] MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static
Adam Ford
- [U-Boot] [PATCH] ARM: imx6q_logic: Enable SPL Booting from NAND
Adam Ford
- [U-Boot] [PATCH] ARM: imx6q_logic: Correct phy fixup for broken ethernet
Adam Ford
- [U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding
Adam Ford
- [U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding
Adam Ford
- [U-Boot] [PATCH] net: dm: fec: Fix regulator enable when using DM_REGULATOR
Adam Ford
- [U-Boot] pfuze100 regulator returning wrong values
Adam Ford
- [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
Adam Ford
- [U-Boot] [PATCH 1/2] USB: musb-new: omap2430: Prep driver for Peripheral support.
Adam Ford
- [U-Boot] EHCI-OMAP driver and DM compatibility
Adam Ford
- [U-Boot] [PATCH] ARM: am3517_evm: Enable DM_SPI and DM_USB
Adam Ford
- [U-Boot] [PATCH] ARM: dts: da850-evm: Re-sync with Kernel 5.0
Adam Ford
- [U-Boot] [PATCH] ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3
Adam Ford
- [U-Boot] [PATCH 3/3] linker: Modify linker scripts to be more generic
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [PATCH] regulator: pbias: Handle extended drain IO when changing omap36 PBIAS
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Adam Ford
- [U-Boot] U-Boot OMAP3 memory map potential issues/questions
Adam Ford
- [U-Boot] Nand boot on imx6q board is broken
Adam Ford
- [U-Boot] Nand boot on imx6q board is broken
Adam Ford
- [U-Boot] [PATCH v1 0/5] db820: Add missing initialization for uart
Ramon Fried
- [U-Boot] [PATCH v1 1/5] arm: mach-snapdragon: db820c: Actually init PLL for serial
Ramon Fried
- [U-Boot] [PATCH v1 2/5] arm: mach-snapdragon: add pinctrl driver for db820c
Ramon Fried
- [U-Boot] [PATCH v1 3/5] configs: dragonboard820c: Enable pinctrl/mux config
Ramon Fried
- [U-Boot] [PATCH v1 4/5] arm: mach-snapdragon: pinctrl: clarify gpio disable bit
Ramon Fried
- [U-Boot] [PATCH v1 5/5] dts: 820c: Add pinctrl node and uart mux
Ramon Fried
- [U-Boot] [PATCH 1/2] dts: db410: fix indentation
Ramon Fried
- [U-Boot] [PATCH 2/2] mach-snapdragon: db410: pinctrl: fix pin count
Ramon Fried
- [U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding
Martin Fuzzey
- [U-Boot] [PATCH] net: dm: fec: Fix regulator enable when using DM_REGULATOR
Martin Fuzzey
- [U-Boot] [PATCH] exynos: allow SPL to build in thumb mode
Guillaume GARDET
- [U-Boot] Re : Re : Re: please pull u-boot-samsung master
Guillaume GARDET
- [U-Boot] [PATCH] exynos: Leave the compiler to choose the register to avoid possible r0 corruption
Guillaume GARDET
- [U-Boot] Re : Re: [PATCH] exynos: allow SPL to build in thumb mode
Guillaume GARDET
- [U-Boot] Help/Clue to improve Z-turn board support
Alexandre GRIVEAUX
- [U-Boot] Help/Clue to improve Z-turn board support
Alexandre GRIVEAUX
- [U-Boot] [PATCH] ARM: zynq: Adding ps7_init and correct some files for Z-turn board
Alexandre GRIVEAUX
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Gao, Liming
- [U-Boot] [PATCH 1/2] mmc: Use proper IS_ENABLED macro to check block support
Ezequiel Garcia
- [U-Boot] [PATCH 2/2] mmc: jz_mmc: Compile-out write support if disabled
Ezequiel Garcia
- [U-Boot] [PATCH 0/2] MIPS: cleanup/optimise linker scripts
Ezequiel Garcia
- [U-Boot] [PATCH 1/3] fsl_sec: fix register layout on Layerscape architectures
Horia Geanta
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Anton Gerasimov
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now[Please note, mail behalf by 3vnmnxammciszqnjoyvtpbt.vynrlcly.fhunyvjr-jopwz.jvt at chromium-sendgmr.bounces.google.com]
Simon Glass
- [U-Boot] Issue faced due to "serial: Remove DM_FLAG_PRE_RELOC flag in various drivers" patch
Simon Glass
- [U-Boot] [PATCH] fdt: Fix string property comparison overflow
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] [PATCH] rockchip: rk3399: fix missing braces in full pinctrl
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Simon Glass
- [U-Boot] [PATCH v2 2/7] disk: part: Extend API to get partition info
Simon Glass
- [U-Boot] [PATCH v2 5/7] test/py: Add base test case for A/B updates
Simon Glass
- [U-Boot] [PATCH v2 6/7] doc: android: Add simple guide for A/B updates
Simon Glass
- [U-Boot] [PATCH v2 7/7] env: am57xx: Implement A/B boot process
Simon Glass
- [U-Boot] [PATCH 1/1] avb2.0: add support for named persistent values
Simon Glass
- [U-Boot] [PATCH] dm: MIGRATION: Update migration plan for SPI/SPI_FLASH
Simon Glass
- [U-Boot] [PATCH v6 1/9] test: add test for lib/lmb.c
Simon Glass
- [U-Boot] [PATCH v6 4/9] fdt: parse "reserved-memory" for memory reservation
Simon Glass
- [U-Boot] [PATCH v6 6/9] fs: prevent overwriting reserved memory
Simon Glass
- [U-Boot] [PATCH v6 7/9] bootm: use new common function lmb_init_and_reserve
Simon Glass
- [U-Boot] [PATCH] test: bootcount: add bootcount-uclass test
Simon Glass
- [U-Boot] [PATCH 3/5] misc: imx8: scu: use platdata instead of priv data
Simon Glass
- [U-Boot] U-Boot 2019.01-rc1-00337-g42cc2cf partition table issues on imx6
Simon Glass
- [U-Boot] [PATCH 1/2] sunxi: drop default SPL_LIBDISK_SUPPORT enablement
Simon Glass
- [U-Boot] [PATCH 2/2] mmc: bring back partition init for non-DM MMC drivers
Simon Glass
- [U-Boot] [PATCH v2] image: fix compiling without CMD_FDT
Simon Glass
- [U-Boot] [PATCH] cmd: image_info: Add checking of default FIT config
Simon Glass
- [U-Boot] [PATCH 11/11] configs: MediaTek: use OF_SEPARATE instead of OF_EMBED
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: add exception command
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: CMD_BOOTEFI_HELLO_COMPILE in configs
Simon Glass
- [U-Boot] [PATCH 1/1] doc: README.commands: fix type
Simon Glass
- [U-Boot] [PATCH v2 2/2] dm: MIGRATION: Update migration plan for DM_SPI_FLASH
Simon Glass
- [U-Boot] [PATCH v1 03/14] tpc70: Provide board_boot_order() function to distinct between eMMC and SD boot
Simon Glass
- [U-Boot] [PATCH v1 14/14] imx: tpc70: Convert TPC70 (imx6q based) board to use DM/DTS in SPL and u-boot
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] [PATCH v2 2/2] dm: MIGRATION: Update migration plan for DM_SPI_FLASH
Simon Glass
- [U-Boot] [PATCH v2 0/7] Fixes for previous -dm pull request
Simon Glass
- [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()
Simon Glass
- [U-Boot] [PATCH v2 2/7] log: Check printf() arguments
Simon Glass
- [U-Boot] [PATCH v2 3/7] buildman: Add support for building with clang
Simon Glass
- [U-Boot] [PATCH v2 4/7] travis: Use buildman for building with clang
Simon Glass
- [U-Boot] [PATCH v2 5/7] net: Fix error handling in sb_eth_raw_ofdata_to_platdata()
Simon Glass
- [U-Boot] [PATCH v2 6/7] buildman: Write the environment out to an 'env' file
Simon Glass
- [U-Boot] [PATCH v2 7/7] buildman: Fix tabs in GetWrapper()
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Simon Glass
- [U-Boot] Issue faced due to "serial: Remove DM_FLAG_PRE_RELOC flag in various drivers" patch
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: sf: use correct printf code
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: gpio: use correct printf code
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: fix memory allocation on sandbox
Simon Glass
- [U-Boot] rk3399 sdram data training read gate is looping forever
Simon Glass
- [U-Boot] [PATCH 1/1] sandbox: i2c_emul_find() No emulators for device 'rtc at 43'
Simon Glass
- [U-Boot] Booting on RK3399
Simon Glass
- [U-Boot] Regression in 2019.01-rc2 for eMMC boot on mxs board?
Simon Glass
- [U-Boot] [PATCH v2] misc: fs_loader: Add support for initializing MMC
Simon Glass
- [U-Boot] [PATCH 00/18] rockchip: Add support for Bob Chromebook
Simon Glass
- [U-Boot] [PATCH 01/18] lib: Allow using display_buffer() in SPL
Simon Glass
- [U-Boot] [PATCH 02/18] clk: Improve debug message in clk_set_default_rates()
Simon Glass
- [U-Boot] [PATCH 03/18] gpio: Use more command-specific enums values
Simon Glass
- [U-Boot] [PATCH 04/18] gpio: Add a simple GPIO API for SPL
Simon Glass
- [U-Boot] [PATCH 05/18] rockchip: Add mention of other boards
Simon Glass
- [U-Boot] [PATCH 06/18] rockchip: Drop note about supporting other SoCs
Simon Glass
- [U-Boot] [PATCH 07/18] rockchip: Bring in device tree files for rk3399-gru
Simon Glass
- [U-Boot] [PATCH 08/18] rockchip: Adjust rk3399 device tree to be closer to linux
Simon Glass
- [U-Boot] [PATCH 09/18] rockchip: evb_rk3399: Tidy up the README
Simon Glass
- [U-Boot] [PATCH 10/18] rockchip: Clarify docs on SPI writing
Simon Glass
- [U-Boot] [PATCH 11/18] rockchip: Allow booting from SPI
Simon Glass
- [U-Boot] [PATCH 12/18] rockchip: Add settings for Samsung LPDDR3 4GB SDRAM 1866MHz
Simon Glass
- [U-Boot] [PATCH 13/18] rockchip: clk: Add mention of four new clocks
Simon Glass
- [U-Boot] [PATCH 14/18] rockchip: Tidy up board include-file ordering
Simon Glass
- [U-Boot] [PATCH 15/18] rockchip: rk3399: Add ROCKCHIP_DEVICE_SETTINGS to set env
Simon Glass
- [U-Boot] [PATCH 16/18] rockchip: Implement spl_gpio in the GPIO driver
Simon Glass
- [U-Boot] [PATCH 17/18] rockchip: gru: Add extra device-tree settings
Simon Glass
- [U-Boot] [PATCH 18/18] rockchip: Add support for chromebook_bob
Simon Glass
- [U-Boot] Booting on RK3399[Please note, mail behalf by sjg at google.com]
Simon Glass
- [U-Boot] [RFC PATCH] bitops: Fix GENMASK definition for Sandbox
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Simon Glass
- [U-Boot] [PATCH v2 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
Simon Glass
- [U-Boot] [PATCH v2 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Simon Glass
- [U-Boot] SPL Platdata howto?
Simon Glass
- [U-Boot] [PATCH 1/3] Revert "power: regulator: Return success on attempt to disable an always-on regulator"
Simon Glass
- [U-Boot] [PATCH 2/3] power: regulator: Introduce regulator_set_enable_if_allowed api
Simon Glass
- [U-Boot] [PATCH 3/3] mmc: omap_hsmmc: Use regulator_set_enable_if_allowed for enabling regulator
Simon Glass
- [U-Boot] [PATCH] of-platdata: improve documentation
Simon Glass
- [U-Boot] [PATCH] dtoc: make generated platdata structs const
Simon Glass
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Glass
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Simon Glass
- [U-Boot] [PATCH] pylibfdt: Use Python 2 in Makefile
Simon Glass
- [U-Boot] [PATCH v3] xyz-modem: Fix timeout loop waiting with WATCHDOG
Simon Glass
- [U-Boot] [PATCH v1 1/2] doc: Fix CONFIG_OF_SEPARATE description
Simon Glass
- [U-Boot] [PATCH v1 2/2] x86: edison: Switch to CONFIG_OF_SEPARATE
Simon Glass
- [U-Boot] [PATCH] kbuild: fix parallel build race caused by u-boot.cfg regeneration
Simon Glass
- [U-Boot] [PATCH] serial: Get rid of CONFIG_DW_SERIAL
Simon Glass
- [U-Boot] [PATCH] drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UART
Simon Glass
- [U-Boot] [PATCH] serial: ns16550: fix debug uart putc called before init
Simon Glass
- [U-Boot] [PATCH] Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"
Simon Glass
- [U-Boot] [PATCH v2] misc: fs_loader: Add support for initializing MMC
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH v3 00/10] samsung: Tidy up sound, DM_MMC drop dead code
Simon Glass
- [U-Boot] [PATCH v3 01/10] Convert CONFIG_BOARD_TYPES to Kconfig
Simon Glass
- [U-Boot] [PATCH v3 02/10] exynos: Drop duplicate 'model' line
Simon Glass
- [U-Boot] [PATCH v3 03/10] exynos: Convert to use CONFIG_BLK
Simon Glass
- [U-Boot] [PATCH v3 04/10] sound: Add a driver for max98088
Simon Glass
- [U-Boot] [PATCH v3 05/10] spring: Update sound to use max98088 codec
Simon Glass
- [U-Boot] [PATCH v3 06/10] spring: Update flashmap details
Simon Glass
- [U-Boot] [PATCH v3 07/10] samsung: Drop board_enable_audio_codec()
Simon Glass
- [U-Boot] [PATCH v3 08/10] samsung: mmc: Drop old MMC init code
Simon Glass
- [U-Boot] [PATCH v3 09/10] fdt: samsung: Drop unused fdt_compat_id values
Simon Glass
- [U-Boot] [PATCH v3 10/10] fdt: tegra: Drop COMPAT_AMS_AS3722
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: use u16* for file name
Simon Glass
- [U-Boot] [PATCH] Makefile: run CONFIG_BOARD_SIZE_LIMIT against .img
Simon Glass
- [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH] common: Kconfig: miscellaneous spelling fixes
Simon Glass
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Simon Glass
- [U-Boot] [PATCH 1/2] nyan-big: change spi delay
Simon Glass
- [U-Boot] [PATCH 2/2] nyan-big: add padding to its file
Simon Glass
- [U-Boot] [PATCH v2 2/4] arm64: zynqmp: Align u-boot-spl.bin for boot.bin creation
Simon Glass
- [U-Boot] [PATCH v10 02/10] lmb: fix allocation at end of address range
Simon Glass
- [U-Boot] [PATCH v10 03/10] lib: lmb: reserving overlapping regions should fail
Simon Glass
- [U-Boot] [PATCH v10 05/10] lib: lmb: extend lmb for checks at load time
Simon Glass
- [U-Boot] [PATCH v10 08/10] lmb: remove unused extern declaration
Simon Glass
- [U-Boot] [PATCH v2] of-platdata: improve documentation
Simon Glass
- [U-Boot] [PATCH 01/10] Kconfig: fix spelling
Simon Glass
- [U-Boot] [PATCH 08/10] pinctrl: Kconfig: spelling fixes
Simon Glass
- [U-Boot] [PATCH 10/10] lib: Kconfig: spelling fixes
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: use u16* for file name
Simon Glass
- [U-Boot] [PATCH 1/1] disk: efi: GUIDs should be const
Simon Glass
- [U-Boot] [PATCH v2 2/3] power: regulator: Introduce regulator_set_enable_if_allowed api
Simon Glass
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Glass
- [U-Boot] [PATCH 02/10] common: spl: Kconfig: spelling fixes
Simon Glass
- [U-Boot] [PATCH 04/10] x86: Kconfig: spelling fixes
Simon Glass
- [U-Boot] [PATCH 06/10] drivers: Kconfig: spelling fixes
Simon Glass
- [U-Boot] [PATCH v2 00/11] samsung: Tidy up sound, DM_MMC drop dead code
Simon Glass
- [U-Boot] [PATCH v10 05/10] lib: lmb: extend lmb for checks at load time
Simon Glass
- [U-Boot] [PATCH v1 1/1] arm64: dt: poplar: add optee node
Simon Glass
- [U-Boot] [PATCH] dtoc: make generated platdata structs const
Simon Glass
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Simon Glass
- [U-Boot] [PATCH] tests: dtoc: adapt tests to changed dtoc output
Simon Glass
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Simon Glass
- [U-Boot] [PATCH] buildman: fix typo
Simon Glass
- [U-Boot] [PATCH v2 1/3] Revert "power: regulator: Return success on attempt to disable an always-on regulator"
Simon Glass
- [U-Boot] [RFC PATCH] bitops: Fix GENMASK definition for Sandbox
Simon Glass
- [U-Boot] [PATCH v2 0/9] Add common pinctrl driver support for rockchip
Simon Glass
- [U-Boot] [PATCH v2 00/19] rockchip: Add support for Bob Chromebook
Simon Glass
- [U-Boot] [PATCH v2 01/19] lib: Allow using display_buffer() in SPL
Simon Glass
- [U-Boot] [PATCH v2 02/19] clk: Improve debug message in clk_set_default_rates()
Simon Glass
- [U-Boot] [PATCH v2 03/19] gpio: Use more command-specific enums values
Simon Glass
- [U-Boot] [PATCH v2 04/19] gpio: Add a simple GPIO API for SPL
Simon Glass
- [U-Boot] [PATCH v2 05/19] rockchip: Add mention of other boards
Simon Glass
- [U-Boot] [PATCH v2 06/19] rockchip: Drop note about supporting other SoCs
Simon Glass
- [U-Boot] [PATCH v2 07/19] rockchip: Bring in device tree files for rk3399-gru
Simon Glass
- [U-Boot] [PATCH v2 08/19] rockchip: Adjust rk3399 device tree to be closer to linux
Simon Glass
- [U-Boot] [PATCH v2 09/19] rockchip: evb_rk3399: Tidy up the README
Simon Glass
- [U-Boot] [PATCH v2 10/19] rockchip: Clarify docs on SPI writing
Simon Glass
- [U-Boot] [PATCH v2 11/19] rockchip: Allow booting from SPI
Simon Glass
- [U-Boot] [PATCH v2 12/19] rockchip: Add settings for Samsung LPDDR3 4GB SDRAM 1866MHz
Simon Glass
- [U-Boot] [PATCH v2 13/19] rockchip: clk: Add mention of four new clocks
Simon Glass
- [U-Boot] [PATCH v2 14/19] rockchip: Tidy up board include-file ordering
Simon Glass
- [U-Boot] [PATCH v2 15/19] rockchip: rk3399: Add ROCKCHIP_DEVICE_SETTINGS to set env
Simon Glass
- [U-Boot] [PATCH v2 16/19] rockchip: Move pull-up/down enum into a common file
Simon Glass
- [U-Boot] [PATCH v2 17/19] rockchip: Implement spl_gpio in the GPIO driver
Simon Glass
- [U-Boot] [PATCH v2 18/19] rockchip: gru: Add extra device-tree settings
Simon Glass
- [U-Boot] [PATCH v2 19/19] rockchip: Add support for chromebook_bob
Simon Glass
- [U-Boot] [PATCH 1/2] nyan-big: change spi delay
Simon Glass
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Simon Glass
- [U-Boot] [PATCH] Makefile: Only build dtc if needed
Simon Glass
- [U-Boot] [PATCH] pci: Add PCI_SLOT macro to include/pci.h
Simon Glass
- [U-Boot] [PATCH 00/33] x86: Add support for sound
Simon Glass
- [U-Boot] [PATCH 01/33] log: Add a Kconfig option to set the default log level
Simon Glass
- [U-Boot] [PATCH 02/33] log: Add documentation for convenience functions
Simon Glass
- [U-Boot] [PATCH 03/33] log: Allow #define LOG_DEBUG to enable logging in a file
Simon Glass
- [U-Boot] [PATCH 04/33] dm: syscon: Don't require a regmap for PCI devices
Simon Glass
- [U-Boot] [PATCH 05/33] i2c: designware: Add error checking on init
Simon Glass
- [U-Boot] [PATCH 06/33] pci: Don't export pci_hose_config_device()
Simon Glass
- [U-Boot] [PATCH 07/33] pci: Fix comment in struct pci_child_platdata
Simon Glass
- [U-Boot] [PATCH 08/33] gpio: Show inactive GPIOs when explicitly requested
Simon Glass
- [U-Boot] [PATCH 09/33] gpio: Use case-insentive matching on the GPIO name
Simon Glass
- [U-Boot] [PATCH 10/33] pci: Add IDs for Intel high-definition audio
Simon Glass
- [U-Boot] [PATCH 11/33] sandbox: Add a note about the growing state_info struct
Simon Glass
- [U-Boot] [PATCH 12/33] x86: Adjust I/O macros to work on 64-bit machines
Simon Glass
- [U-Boot] [PATCH 13/33] x86: samus: Increase the pre-reloc memory
Simon Glass
- [U-Boot] [PATCH 14/33] x86: link: Increase malloc size and decrease code size
Simon Glass
- [U-Boot] [PATCH 15/33] x86: sandbox: pch: Add a CONFIG option for PCH
Simon Glass
- [U-Boot] [PATCH 16/33] sandbox: pch: Add a test for the PCH uclass
Simon Glass
- [U-Boot] [PATCH 17/33] pch: Add ioctl support
Simon Glass
- [U-Boot] [PATCH 18/33] x86: ivybridge: Add a way to get the HDA config setting
Simon Glass
- [U-Boot] [PATCH 19/33] sound: Mark sound_setup() as optional
Simon Glass
- [U-Boot] [PATCH 20/33] sound: Add uclass operations for beeping
Simon Glass
- [U-Boot] [PATCH 21/33] sound: Add support for Intel HDA
Simon Glass
- [U-Boot] [PATCH 22/33] sandbox: sound: Silence sound for testing
Simon Glass
- [U-Boot] [PATCH 23/33] sound: x86: link: Add sound support
Simon Glass
- [U-Boot] [PATCH 24/33] sound: x86: Add beeping support in i8254
Simon Glass
- [U-Boot] [PATCH 25/33] sound: Add a driver for the i8254 beep
Simon Glass
- [U-Boot] [PATCH 26/33] x86: coreboot: Enable the beeper sound driver
Simon Glass
- [U-Boot] [PATCH 27/33] x86: broadwell: Add support for the ADSP
Simon Glass
- [U-Boot] [PATCH 28/33] x86: broadwell: Don't bother probing the PCH for pinctrl
Simon Glass
- [U-Boot] [PATCH 29/33] x86: broadwell: Add support for serial I/O devices
Simon Glass
- [U-Boot] [PATCH 30/33] x86: sound: Add support for broadwell I2S
Simon Glass
- [U-Boot] [PATCH 31/33] sound: Add a driver for RealTek RT5677
Simon Glass
- [U-Boot] [PATCH 32/33] x86: sound: Add sound support for samus (broadwell)
Simon Glass
- [U-Boot] [PATCH 33/33] x86: Add sound support for samus
Simon Glass
- [U-Boot] u-boot-dm failures in "ut dm bootcount"
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [BUG] efi_loader: GetNextVariableName() fails on qemu-x86_64
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH 1/3] dm: device: fail uclass_find_first_device() if list_empty
Simon Glass
- [U-Boot] [PATCH 2/3] dm: sata: add null pointer check for dev
Simon Glass
- [U-Boot] [PATCH 3/3] cmd: sata: add null pointer check for dev
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH 00/40] x86: Add support for booting from TPL
Simon Glass
- [U-Boot] [PATCH 01/40] binman: Don't generate an error in 'text' entry constructor
Simon Glass
- [U-Boot] [PATCH 02/40] binman: Don't show image-skip message by default
Simon Glass
- [U-Boot] [PATCH 03/40] binman: Add a missing comment in Entry_vblock
Simon Glass
- [U-Boot] [PATCH 04/40] dm: core: Fix translate condition in ofnode_get_addr_size()
Simon Glass
- [U-Boot] [PATCH 05/40] cros_ec: Use a hyphen in the uclass name
Simon Glass
- [U-Boot] [PATCH 06/40] spl: Allow sandbox to build a device-tree file
Simon Glass
- [U-Boot] [PATCH 07/40] RFC: binman: Allow sections to have an offset
Simon Glass
- [U-Boot] [PATCH 08/40] x86: start64: Fix copyright message
Simon Glass
- [U-Boot] [PATCH 09/40] x86: mp_init: Use proper error numbers
Simon Glass
- [U-Boot] [PATCH 10/40] x86: Add a way to reinit the cpu
Simon Glass
- [U-Boot] [PATCH 11/40] x86: dts: Add device-tree labels for rtc and reset
Simon Glass
- [U-Boot] [PATCH 12/40] x86: Update a stale comment about ifdtool
Simon Glass
- [U-Boot] [PATCH 13/40] x86: Support SPL and TPL
Simon Glass
- [U-Boot] [PATCH 14/40] x86: Support booting with TPL
Simon Glass
- [U-Boot] [PATCH 15/40] x86: Add a handoff header file
Simon Glass
- [U-Boot] [PATCH 16/40] x86: broadwell: Improve SDRAM debugging output
Simon Glass
- [U-Boot] [PATCH 17/40] x86: broadwell: Allow SDRAM init from SPL
Simon Glass
- [U-Boot] [PATCH 18/40] x86: Move init of debug UART to cpu.c
Simon Glass
- [U-Boot] [PATCH 19/40] x86: broadwell: Split CPU init
Simon Glass
- [U-Boot] [PATCH 20/40] x86: Add support for starting from SPL/TPL
Simon Glass
- [U-Boot] [PATCH 21/40] x86: Allow 16-bit init to be in TPL
Simon Glass
- [U-Boot] [PATCH 22/40] x86: broadwell: Allow booting from SPL
Simon Glass
- [U-Boot] [PATCH 23/40] x86: broadwell: Select refcode and CPU code for SPL
Simon Glass
- [U-Boot] [PATCH 24/40] x86: Add common Intel code for SPL
Simon Glass
- [U-Boot] [PATCH 25/40] x86: Support saving MRC data from SPL
Simon Glass
- [U-Boot] [PATCH 26/40] x86: Add a simple TPL implementations
Simon Glass
- [U-Boot] [PATCH 27/40] x86: mrccache: Add more debugging
Simon Glass
- [U-Boot] [PATCH 28/40] x86: Add a sysreset driver for the Intel PCH
Simon Glass
- [U-Boot] [PATCH 29/40] x86: Support TPL in Intel common code
Simon Glass
- [U-Boot] [PATCH 30/40] x86: Don't set up MTRRs in SPL
Simon Glass
- [U-Boot] [PATCH 31/40] x86: Don't generate a bootstage report in SPL
Simon Glass
- [U-Boot] [PATCH 32/40] x86: Support PCI VGA ROM when TPL is used
Simon Glass
- [U-Boot] [PATCH 33/40] x86: sysreset: Implement the get_last() method
Simon Glass
- [U-Boot] [PATCH 34/40] x86: Add documention on the samus flashmap
Simon Glass
- [U-Boot] [PATCH 35/40] x86: samus: Update device tree for SPL
Simon Glass
- [U-Boot] [PATCH 36/40] x86: samus: Update device tree for verified boot
Simon Glass
- [U-Boot] [PATCH 37/40] x86: Update device tree for TPL
Simon Glass
- [U-Boot] [PATCH 38/40] x86: Update device tree for Chromium OS verified boot
Simon Glass
- [U-Boot] [PATCH 39/40] x86: Fix device-tree indentation
Simon Glass
- [U-Boot] [PATCH 40/40] x86: samus: Add a target to boot through TPL
Simon Glass
- [U-Boot] [PATCH] Makefile: remove generated font files
Simon Glass
- [U-Boot] [PATCH v3 02/20] bitops: Fix GENMASK definition for Sandbox
Simon Glass
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Simon Glass
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
Simon Glass
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Simon Glass
- [U-Boot] [PATCH v2 02/10] spl: misc: Allow misc drivers in SPL and TPL
Simon Glass
- [U-Boot] [PATCH] cros: Expand the Chromium OS documentation
Simon Glass
- [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already
Simon Glass
- [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()
Simon Glass
- [U-Boot] [PATCH 2/4] fdt: Introduce fdtdec_get_alias_highest_id()
Simon Glass
- [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices
Simon Glass
- [U-Boot] [PATCH 4/4] i2c: mux: Add support for not listed sub-buses
Simon Glass
- [U-Boot] [PATCH v2 07/11] clk: Add fixed-factor clock driver
Simon Glass
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Simon Glass
- [U-Boot] [PATCH 9/9] mmc: sunxi: Mark end of DM_MMC #ifdefs
Simon Glass
- [U-Boot] [PATCH 8/9] arm: sunxi: Enable DM_MMC
Simon Glass
- [U-Boot] [RFC] arch/arm/lib/reloc_aarch64_efi.c
Simon Glass
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Simon Glass
- [U-Boot] [PATCH v3] misc: fs_loader: Add support for initializing block device
Simon Glass
- [U-Boot] [PATCH 1/4 v3] pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr
Simon Glass
- [U-Boot] [PATCH v2 1/2] dm: device: fail uclass_find_first_device() if list_empty
Simon Glass
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Simon Glass
- [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [PATCH 2/2] cmd: binop: Use hex2bin
Simon Glass
- [U-Boot] [PATCH] ihs_mdio: Use new regmap interface
Simon Glass
- [U-Boot] [PATCH 1/1] test: provide unit test for memory functions
Simon Glass
- [U-Boot] [PATCH v2 01/17] dm: Fix documentation entry as there is no UCLASS_CLOCK uclass
Simon Glass
- [U-Boot] [PATCH v2 02/17] cmd: Do not show frequency for clocks which .get_rate() return error
Simon Glass
- [U-Boot] [PATCH v2 03/17] dm: clk: Define clk_get_parent_rate() for clk operations
Simon Glass
- [U-Boot] [PATCH v2 04/17] dm: clk: Define clk_get_by_id() for clk operations
Simon Glass
- [U-Boot] [PATCH 1/2] cmd: binop: Use new environment api
Simon Glass
- [U-Boot] Entry point used by SPL for uImages
Daniel Glöckner
- [U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers
Cédric Le Goater
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] altera_pio: fix get_value
Simon Goldschmidt
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH] of-platdata: improve documentation
Simon Goldschmidt
- [U-Boot] [PATCH] dtoc: make generated platdata structs const
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v1 4/4] mmc: socfpga: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH] drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UART
Simon Goldschmidt
- [U-Boot] [PATCH] serial: ns16550: fix debug uart putc called before init
Simon Goldschmidt
- [U-Boot] [PATCH 0/3] arm: socfpga: clean up socfpga_common.h
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] arm: socfpga: move legacy i2c defines to vining
Simon Goldschmidt
- [U-Boot] [PATCH 2/3] arm: socfpga: clean up socfpga_common.h
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] arm: socfpga: move legacy i2c defines to vining
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Simon Goldschmidt
- [U-Boot] [PATCH 0/3] arm: socpfpga: gen5 clean up ETH RST & PHY mode
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] net: designware: socfpga: adapt to Gen5
Simon Goldschmidt
- [U-Boot] [PATCH 2/3] arm: socfpga: gen5 enable designware_socfpga
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] net: designware: socfpga: adapt to Gen5
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] net: designware: socfpga: adapt to Gen5
Simon Goldschmidt
- [U-Boot] [PATCH 2/3] arm: socfpga: gen5 enable designware_socfpga
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Simon Goldschmidt
- [U-Boot] [PATCH] of-platdata: improve documentation
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/3] arm: socpfpga: gen5 clean up ETH RST & PHY mode
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/3] net: designware: socfpga: adapt to Gen5
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga
Simon Goldschmidt
- [U-Boot] [PATCH v2 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Simon Goldschmidt
- [U-Boot] [PATCH] Makefile: run CONFIG_BOARD_SIZE_LIMIT against .img
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/3] arm: socpfpga: gen5 clean up ETH RST & PHY mode
Simon Goldschmidt
- [U-Boot] [PATCH v3 1/3] net: designware: socfpga: adapt to Gen5
Simon Goldschmidt
- [U-Boot] [PATCH v3 2/3] arm: socfpga: gen5 enable designware_socfpga
Simon Goldschmidt
- [U-Boot] [PATCH v3 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Simon Goldschmidt
- [U-Boot] [PATCH v6 6/9] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] net: designware: fix tx packet length
Simon Goldschmidt
- [U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v6 1/9] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v10 00/10] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v10 01/10] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v10 02/10] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v10 03/10] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v10 04/10] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v10 05/10] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v10 06/10] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v10 07/10] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v10 08/10] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v10 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v10 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] [PATCH v10 00/10] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Simon Goldschmidt
- [U-Boot] serial: ns16550: fix debug uart putc called before init
Simon Goldschmidt
- [U-Boot] [PATCH v2] of-platdata: improve documentation
Simon Goldschmidt
- [U-Boot] [PATCH v10 05/10] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Simon Goldschmidt
- [U-Boot] no DTB with nand SPL on sama5d3
Simon Goldschmidt
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Simon Goldschmidt
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH] dtoc: make generated platdata structs const
Simon Goldschmidt
- [U-Boot] [PATCH] tests: dtoc: adapt tests to changed dtoc output
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] env: common: Return specific error code on bad CRC
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] lib: lmb: rename lmb_get_unreserved_size to lmb_get_free_size
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] lib: lmb: cleanup var names and patman warnings
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/4] spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/4] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Simon Goldschmidt
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] test: provide unit test for memory functions
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] Add domain mapping for Pepperl+Fuchs
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] linker: Modify linker scripts to be more generic
Simon Goldschmidt
- [U-Boot] [PATCH] RFC: dfu: mmc: call fs functions instead of run_command
Simon Goldschmidt
- [U-Boot] [PATCH] RFC: dfu: mmc: call fs functions instead of run_command
Simon Goldschmidt
- [U-Boot] [PATCH] RFC: dfu: mmc: call fs functions instead of run_command
Simon Goldschmidt
- [U-Boot] [PATCH] dfu: mmc: call fs functions instead of run_command
Simon Goldschmidt
- [U-Boot] [PATCH 0/5] arm: socfpga: implement proper peripheral reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 4/5] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 5/5] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Simon Goldschmidt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH 4/5] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 5/5] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH 5/5] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Simon Goldschmidt
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Simon Goldschmidt
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Alexander Graf
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Alexander Graf
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
Alexander Graf
- [U-Boot] [PATCH 1/5] efi_loader: LoadImage: always allocate new pages
Alexander Graf
- [U-Boot] [PATCH 2/5] efi_loader: set entry point in efi_load_pe()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: refactor switch to non-secure mode
Alexander Graf
- [U-Boot] [PATCH v2 2/2] rpi: Enable command bmp
Alexander Graf
- [U-Boot] [U-Boot, v2, 1/2] cmd: bmp: Make integer-to-pointer cast platform, independent
Alexander Graf
- [U-Boot] [PATCH 1/5] efi_loader: LoadImage: always allocate new pages
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 3/3] efi_loader: remove block device details from efi file
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 3/3] efi_loader: remove block device details from efi file
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] memcpy/memset on arm64 platforms
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH] ARM: bcm283x: Fix definition of MBOX_TAG_TEST_PIXEL_ORDER
Alexander Graf
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Alexander Graf
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Alexander Graf
- [U-Boot] [PATCH v4 0/9] cmd: add efitool for efi environment
Alexander Graf
- [U-Boot] [PATCH v4 9/9] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH v4 9/9] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH 01/11] riscv: Rename cpu/qemu to cpu/generic
Alexander Graf
- [U-Boot] [PATCH 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Alexander Graf
- [U-Boot] [PATCH 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Alexander Graf
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Alexander Graf
- [U-Boot] [PATCH 05/11] net: macb: Fix GEM hardware detection
Alexander Graf
- [U-Boot] [PATCH 06/11] clk: Add SiFive FU540 PRCI clock driver
Alexander Graf
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Alexander Graf
- [U-Boot] [PATCH 08/11] drivers: serial_sifive: Fix baud rate calculation
Alexander Graf
- [U-Boot] [PATCH 09/11] drivers: serial: serial_sifive: Skip baudrate config if no input clock
Alexander Graf
- [U-Boot] [PATCH 10/11] cpu: Bind timer driver for boot hart
Alexander Graf
- [U-Boot] [PATCH 11/11] riscv: Add SiFive FU540 board support
Alexander Graf
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Alexander Graf
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Alexander Graf
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Alexander Graf
- [U-Boot] [PATCH v2 08/11] drivers: serial_sifive: Fix baud rate calculation
Alexander Graf
- [U-Boot] [PATCH v2 10/11] cpu: Bind timer driver for boot hart
Alexander Graf
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Alexander Graf
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Alexander Graf
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Alexander Graf
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
Alexander Graf
- [U-Boot] [PATCH v5 2/7] cmd: efidebug: add devices command
Alexander Graf
- [U-Boot] [PATCH v5 6/7] cmd: efidebug: add memmap command
Alexander Graf
- [U-Boot] [PATCH v5 7/7] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH 2/3] efi_loader: use freestanding library for efi apps
Alexander Graf
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Alexander Graf
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
Alexander Graf
- [U-Boot] [PATCH v5 2/7] cmd: efidebug: add devices command
Alexander Graf
- [U-Boot] [PATCH v3 2/2] efi_selftest: fix variables test for GetNextVariableName()
Alexander Graf
- [U-Boot] [PATCH v3 0/5] subject: efi_loader: add HII database protocol
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v3 0/5] subject: efi_loader: add HII database protocol
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Patch non-runtime code out at ExitBootServices already
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Alexander Graf
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PATCH 1/2] ARM: zynq: Run distribution boot commands first
Alexander Graf
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Alexander Graf
- [U-Boot] [PATCH v6 0/7] cmd: add efidebug for efi environment
Alexander Graf
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Alexander Graf
- [U-Boot] [PATCH v6 1/7] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Alexander Graf
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2019-01-28
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Patch non-runtime code out at ExitBootServices already
Alexander Graf
- [U-Boot] [PATCH v2 0/2] efi_loader: Patch RTS at ExitBootServices
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: Patch non-runtime code out at ExitBootServices already
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2019-01-28
Alexander Graf
- [U-Boot] [PATCH v6 6/7] cmd: efidebug: add images command
Alexander Graf
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Alexander Graf
- [U-Boot] [RFC 3/3] drivers: align block device drivers with DM-efi integration
Alexander Graf
- [U-Boot] [RFC 0/3] dm, efi: integrate efi_disk into DM
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v3 0/2] efi_loader: Patch RTS at ExitBootServices
Alexander Graf
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH v3 2/2] efi_loader: Patch non-runtime code out at ExitBootServices already
Alexander Graf
- [U-Boot] [PATCH] rpi: add Compute Module 3+
Alexander Graf
- [U-Boot] [PATCH] rpi: add Compute Module 3+
Alexander Graf
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Alexander Graf
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Alexander Graf
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Alexander Graf
- [U-Boot] [PATCH] initcall: Move to inline function
Alexander Graf
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Alexander Graf
- [U-Boot] [PATCH] rpi: add Compute Module 3+
Jonathan Gray
- [U-Boot] [PATCH] rpi: add Compute Module 3+
Jonathan Gray
- [U-Boot] [PATCH] rpi: add Compute Module 3+
Jonathan Gray
- [U-Boot] [PATCH v2] rpi: add Compute Module 3+
Jonathan Gray
- [U-Boot] [PATCH] mmc: hi6220_dw_mmc: add driver model support
Shawn Guo
- [U-Boot] [PATCH] poplar: save environment at a different offset
Shawn Guo
- [U-Boot] [PATCH 0/2] Enable fastboot support for Poplar board
Shawn Guo
- [U-Boot] [PATCH] fdt: support booting with dtb in Android image
Shawn Guo
- [U-Boot] [PATCH 0/3] Enable mmc driver model for Poplar board
Shawn Guo
- [U-Boot] [PATCH 1/3] poplar: sync up device tree with kernel 4.20
Shawn Guo
- [U-Boot] [PATCH 2/3] mmc: hi6220_dw_mmc: add compatible for Poplar support
Shawn Guo
- [U-Boot] [PATCH 3/3] poplar: clean up board level mmc initialization code
Shawn Guo
- [U-Boot] [PATCH 1/3] poplar: sync up device tree with kernel 4.20
Shawn Guo
- [U-Boot] [PATCH v1 1/1] arm64: dt: poplar: add optee node
Shawn Guo
- [U-Boot] [PATCH 0/3] Add Ethernet support for Poplar board
Shawn Guo
- [U-Boot] [PATCH 1/3] reset: add reset driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH 3/3] poplar: enable Ethernet driver support
Shawn Guo
- [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH] dm: video: fix test failures with enabled default TrueType font
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] [PATCH 09/10] video: Kconfig: spelling fixes
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 02/11] video: dw_hdmi: support SoC specific read/write ops
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 03/11] video: dw_hdmi: add support for color conversion
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 04/11] video: Add Meson Video Processing Unit Driver
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 01/11] power: domain: meson-gx-pwrc-vpu: add missing depends
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 08/11] arm: meson: board-gx: Setup VPU in fdt
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 09/11] configs: meson64: use vidconsole and usbkbd if enabled
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 10/11] arm: meson64: enable console mux and console env by default
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 11/11] arm: libretech-cc: enable video by default
Anatolij Gustschin
- [U-Boot] [PATCH] imx: video: Fix return value issue
Anatolij Gustschin
- [U-Boot] [PATCH 1/3] videomodes: Relax EDID validation checks for hsync/vsync pulse width
Anatolij Gustschin
- [U-Boot] [PATCH] ihs_video_out: Fix error handling
Anatolij Gustschin
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190128
Anatolij Gustschin
- [U-Boot] [PATCH u-boot 04/11] video: Add Meson Video Processing Unit Driver
Anatolij Gustschin
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH] video: bmp: Add support for 24bpp BMP files on 16bpp displays
Anatolij Gustschin
- [U-Boot] [PATCH] arm: mvebu: theadorable: Enable DM_VIDEO support
Anatolij Gustschin
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH v2] video: Armada XP: Move driver to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH v2] video: bmp: Add support for 24bpp BMP files on 16bpp displays
Anatolij Gustschin
- [U-Boot] [PATCH v2] arm: mvebu: theadorable: Enable video / LCD support with the new DM driver
Anatolij Gustschin
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH] Makefile: remove generated font files
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] [PATCH] mmc: sunxi: Fix mmc clocks for DM_MMC
Zoltan HERPAI
- [U-Boot] Regression in 2019.01-rc2 for eMMC boot on mxs board?
Michael Heimpold
- [U-Boot] Regression in 2019.01-rc2 for eMMC boot on mxs board?
Michael Heimpold
- [U-Boot] [PATCH v2 5/9] arm: actions: add S700 SoC device tree
Rob Herring
- [U-Boot] [PATCH u-boot 0/2] net: designware: add meson meson compatibles
Joe Hershberger
- [U-Boot] [PATCH] net: phy: Add clause 45 identifier to phy_device
Joe Hershberger
- [U-Boot] [PATCH v9 09/10] tftp: prevent overwriting reserved memory
Joe Hershberger
- [U-Boot] [PATCH v2 5/7] net: Fix error handling in sb_eth_raw_ofdata_to_platdata()
Joe Hershberger
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Joe Hershberger
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Joe Hershberger
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Joe Hershberger
- [U-Boot] [PATCH] net: dm: fec: Fix regulator enable when using DM_REGULATOR
Joe Hershberger
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Joe Hershberger
- [U-Boot] [PATCH] net: explicitly assign errno to return code in case of network failure
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: mvpp2: fix lookup of mdio registers base address
Joe Hershberger
- [U-Boot] [PATCH v2] Aquantia: Print information about system interface and firmware version
Joe Hershberger
- [U-Boot] [PATCH 1/2] AQUANTIA USXGMII autoneg enable
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: mvpp2: mdio device per port
Joe Hershberger
- [U-Boot] [PATCH] net: phy: micrel: fix KSZ9031 clock skew for values greater 0ps
Joe Hershberger
- [U-Boot] [PATCH v2] net: macb: fix mapping of registers
Joe Hershberger
- [U-Boot] [PATCH 1/1] net: mvneta: Add GPIO configuration support
Joe Hershberger
- [U-Boot] [PATCH] net: mvgbe: fallback phy-mode to GMII
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: phy: promote phy_{read, write}_mmd_indirect from ti.c to generic code
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: phy: at803x: Address packet drops at low traffic rate due to SmartEEE feature
Joe Hershberger
- [U-Boot] [PATCH u-boot] net: phy: realtek: Add functions to read PHY's extended registers
Joe Hershberger
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v2] Aquantia: Print information about system interface and firmware version
Joe Hershberger
- [U-Boot] [PATCH v2] Aquantia: Print information about system interface and firmware version
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: move ether_crc to tsec driver
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: remove CONFIG_MCAST_TFTP
Joe Hershberger
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 05/12] net: macb: Fix GEM hardware detection
Joe Hershberger
- [U-Boot] [PATCH v3 04/12] net: macb: Fix clk API usage for RISC-V systems
Joe Hershberger
- [U-Boot] [PATCH v2 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v2 1/3] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v2 2/3] net: phy: ti: use generic helpers to access MMD registers
Joe Hershberger
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH] net: phy: realtek: Introduce quirk to mark RXC not stoppable
Joe Hershberger
- [U-Boot] [PATCH v3 1/3] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 1/3] net: phy: Add support for accessing MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH] net: phy: realtek: Introduce quirk to mark RXC not stoppable
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: phy: Move fixed link code to separate routine
Joe Hershberger
- [U-Boot] [PATCH v2 3/3] net: phy: ar803x: Use common functions for RGMII internal delays
Joe Hershberger
- [U-Boot] [PATCH v2 2/3] net: phy: ar803x: Address packet drops at low traffic rate due to SmartEEE feature
Joe Hershberger
- [U-Boot] [PATCH v2 1/3] net: phy: ar803x: Use phy_read_mmd and phy_write_mmd functions
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] net: phy: Add clause 45 identifier to phy_device
Joe Hershberger
- [U-Boot] net: designware: fix tx packet length
Joe Hershberger
- [U-Boot] net: designware: clear padding bytes
Joe Hershberger
- [U-Boot] net: mvpp2: fix lookup of mdio registers base address
Joe Hershberger
- [U-Boot] net: mvpp2: mdio device per port
Joe Hershberger
- [U-Boot] net: explicitly assign errno to return code in case of network failure
Joe Hershberger
- [U-Boot] net: remove duplicate definition of ETHADDR_WILDCARD
Joe Hershberger
- [U-Boot] net: fix env flags for eth10addr and above
Joe Hershberger
- [U-Boot] net: phy: micrel: fix KSZ9031 clock skew for values greater 0ps
Joe Hershberger
- [U-Boot] net: mvgbe: fallback phy-mode to GMII
Joe Hershberger
- [U-Boot] net: mvneta: Add GPIO configuration support
Joe Hershberger
- [U-Boot] net: macb: fix mapping of registers
Joe Hershberger
- [U-Boot] net: phy: realtek: Add functions to read PHY's extended registers
Joe Hershberger
- [U-Boot] net: move ether_crc to tsec driver
Joe Hershberger
- [U-Boot] net: remove CONFIG_MCAST_TFTP
Joe Hershberger
- [U-Boot] net: phy: aquantia: Enable autoneg when on USXGMII
Joe Hershberger
- [U-Boot] net: phy: aquantia: Print information on config
Joe Hershberger
- [U-Boot] [PATCH v2 1/3] net: phy: ar803x: Use phy_read_mmd and phy_write_mmd functions
Joe Hershberger
- [U-Boot] [PATCH v2 3/3] net: phy: ar803x: Use common functions for RGMII internal delays
Joe Hershberger
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jean-Jacques Hiblot
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Jean-Jacques Hiblot
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 1/2] Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 2/2] usb: Make compiling gadget support optional
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Jean-Jacques Hiblot
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v2 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v2 1/2] Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v2 2/2] usb: Make compiling gadget support optional
Jean-Jacques Hiblot
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/4] Enable DM USB support (host and gadget) and full RNDIS boot flow
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/4] usb: ether: call _usb_eth_halt() if initialization fails
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 4/4] configs: removing am335x_evm_usbspl_defconfig
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/3] Enable DM USB support (host and gadget) in the USB host boot flow
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/3] ARM: DTS: am43xx: Add aliases for the USB ports
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/3] ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/3] configs: am43xx_evm_usbhost_defconfig: Enable DM_USB support
Jean-Jacques Hiblot
- [U-Boot] [PATCH] usb: udc-uclass: Fixed problem when no alias is defined in DT
Jean-Jacques Hiblot
- [U-Boot] [PATCH] regulator: pbias: Handle extended drain IO when changing omap36 PBIAS
Jean-Jacques Hiblot
- [U-Boot] configs: Enable CONFIG_BLK in a few TI boards
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/3] configs: am43xx_evm_usbhost_defconfig: Enable DM_USB support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/3] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/3] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/3] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/3] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 02/10] spl: misc: Allow misc drivers in SPL and TPL
Jean-Jacques Hiblot
- [U-Boot] [PATCHv3 00/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
Z.q. Hou
- [U-Boot] [PATCHv3 01/11] armv8: fsl-layerscpae: correct the PCIe controllers' region size
Z.q. Hou
- [U-Boot] [PATCHv3 02/11] armv8: lx2160a: add MMU table entries for PCIe
Z.q. Hou
- [U-Boot] [PATCHv3 03/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
Z.q. Hou
- [U-Boot] [PATCHv3 04/11] kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT
Z.q. Hou
- [U-Boot] [PATCHv3 05/11] pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs
Z.q. Hou
- [U-Boot] [PATCHv3 06/11] armv8: lx2160a: add PCIe controller DT nodes
Z.q. Hou
- [U-Boot] [PATCHv3 07/11] armv8: lx2160a: enable PCIe support on RDB defconfig
Z.q. Hou
- [U-Boot] [PATCHv3 08/11] armv8: lx2160a: enable the pci command
Z.q. Hou
- [U-Boot] [PATCHv3 09/11] pci: ls_pcie_g4: add Workaround for A-011577
Z.q. Hou
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Z.q. Hou
- [U-Boot] [PATCHv3 11/11] pci: ls_pcie_g4: add Workaround for A-011452
Z.q. Hou
- [U-Boot] board/amlogic/odroid-c2/README - how to make the instructions more portable?
Martin Husemann
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
J, KEERTHY
- [U-Boot] Issue faced due to "serial: Remove DM_FLAG_PRE_RELOC flag in various drivers" patch
Priyanka Jain
- [U-Boot] Issue faced due to "serial: Remove DM_FLAG_PRE_RELOC flag in various drivers" patch
Priyanka Jain
- [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
Priyanka Jain
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Offouga Joris
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Offouga Joris
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Offouga Joris
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Offouga Joris
- [U-Boot] [PATCH] exynos: allow SPL to build in thumb mode
Minkyu Kang
- [U-Boot] [V2] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [V2] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH] exynos: Leave the compiler to choose the register to avoid possible r0 corruption
Minkyu Kang
- [U-Boot] [V3] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH v3 08/10] samsung: mmc: Drop old MMC init code
Minkyu Kang
- [U-Boot] [PATCH v3 07/10] samsung: Drop board_enable_audio_codec()
Minkyu Kang
- [U-Boot] [PATCH v3 03/10] exynos: Convert to use CONFIG_BLK
Minkyu Kang
- [U-Boot] [PATCH v3 02/10] exynos: Drop duplicate 'model' line
Minkyu Kang
- [U-Boot] [PATCH v3 01/10] Convert CONFIG_BOARD_TYPES to Kconfig
Minkyu Kang
- [U-Boot] [PATCH v2 00/11] samsung: Tidy up sound, DM_MMC drop dead code
Minkyu Kang
- [U-Boot] [PATCH] hashtable: fix environment variable corruption
Roman Kapl
- [U-Boot] [PATCH 00/12] nxp: fix dhcp and efi boot support for various socs
Mian Yousaf Kaukab
- [U-Boot] [PATCH 01/12] nxp: ls1088a: fix dppa exit when using efi boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 02/12] nxp: ls1088a: fix fsl-mc search path
Mian Yousaf Kaukab
- [U-Boot] [PATCH 03/12] Revert "ls1088a: remove dhcp function from u-boot env as boot source"
Mian Yousaf Kaukab
- [U-Boot] [PATCH 04/12] nxp: ls1088a: use default scan_dev_for_boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 05/12] Revert "ls2080ardb: remove dhcp function from env as boot source"
Mian Yousaf Kaukab
- [U-Boot] [PATCH 06/12] nxp: ls2080a: use default scan_dev_for_boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 07/12] nxp: ls1046a: enable EFI_LOADER_BOUNCE_BUFFER
Mian Yousaf Kaukab
- [U-Boot] [PATCH 08/12] nxp: ls1046a: enable dhcp boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 09/12] nxp: ls1046a: use default scan_dev_for_boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 10/12] nxp: ls1043a: enable EFI_LOADER_BOUNCE_BUFFER
Mian Yousaf Kaukab
- [U-Boot] [PATCH 11/12] nxp: ls1043a: enable dhcp boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 12/12] nxp: ls1043a: use default scan_dev_for_boot
Mian Yousaf Kaukab
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Keerthy
- [U-Boot] [RFC PATCH] common: fdt_support: Remove fdt_add_mem_rsv in fdt_shrink_to_minimum
Keerthy
- [U-Boot] [PATCH 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Keerthy
- [U-Boot] [PATCH 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node
Keerthy
- [U-Boot] [PATCH 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Keerthy
- [U-Boot] [PATCH 5/5] configs: am65x_evm_a53: enable networking
Keerthy
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] [PATCH] rockchip: dts: rk3399-firely: add 'same-as-spl'
Mark Kettenis
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] Booting on RK3399
Mark Kettenis
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Mark Kettenis
- [U-Boot] [PATCH 05/18] rockchip: Add mention of other boards
Mark Kettenis
- [U-Boot] rockchip: dts: rk3399-firely: add 'same-as-spl'
Mark Kettenis
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Vasily Khoruzhick
- [U-Boot] [PATCH 0/9] sunxi: enable DM_MMC
Vasily Khoruzhick
- [U-Boot] [PATCH 0/9] sunxi: enable DM_MMC
Vasily Khoruzhick
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Vasily Khoruzhick
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Vasily Khoruzhick
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Vasily Khoruzhick
- [U-Boot] [PATCH] sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi
Vasily Khoruzhick
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Alex Kiernan
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Alex Kiernan
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Alex Kiernan
- [U-Boot] Proposed fastboot changes
Alex Kiernan
- [U-Boot] Proposed fastboot changes
Alex Kiernan
- [U-Boot] [PATCH] cmd: Kconfig: LED command depends on LED subsystems
Jan Kiszka
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Jan Kiszka
- [U-Boot] am335x: EFI: tftp: CACHE: Misaligned operation at range [9ce7e470, 9ce7e4b0]
Matwey V. Kornilov
- [U-Boot] test vs itest command confusion when using setexpr
Jörg Krause
- [U-Boot] imx8mq-evk: Outbound network packets lost
Sergey Kubushyn
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Sergey Kubushyn
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Sergey Kubushyn
- [U-Boot] imx8mq-evk: Outbound network packets lost
Sergey Kubushyn
- [U-Boot] imx8mq-evk: Outbound network packets lost
Sergey Kubushyn
- [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
Ashish Kumar
- [U-Boot] [PATCH] mmc: sunxi: Fix mmc clocks for DM_MMC
Priit Laes
- [U-Boot] [PATCH] arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
Priit Laes
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Priit Laes
- [U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Priit Laes
- [U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Priit Laes
- [U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Priit Laes
- [U-Boot] [PATCH 1/3] videomodes: Relax EDID validation checks for hsync/vsync pulse width
Priit Laes
- [U-Boot] [RESEND] videomodes: Relax EDID validation checks for hsync/vsync pulse width
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Priit Laes
- [U-Boot] [PATCH 1/2] ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Rask Ingemann Lambertsen
- [U-Boot] [PATCH 1/9] dm: allow 4GB of DRAM on 32bit systems
Rask Ingemann Lambertsen
- [U-Boot] [PATCH 0/2] sunxi sun6i SPI support
Oskari Lemmela
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Oskari Lemmela
- [U-Boot] [PATCH 2/2] arm: timer: sunxi: fix spurious timeout issues
Oskari Lemmela
- [U-Boot] [PATCH] sunxi: add spi flash bootcmd
Oskari Lemmela
- [U-Boot] [PATCH] env: check defines if config env is in spi flash
Oskari Lemmela
- [U-Boot] [RFC PATCH 0/1] SPI flash dependency rework
Oskari Lemmela
- [U-Boot] [RFC PATCH 1/1] spi: Kconfig: change dependency order
Oskari Lemmela
- [U-Boot] [PATCH v2 0/2] sunxi: add spi flash bootcmd
Oskari Lemmela
- [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command
Oskari Lemmela
- [U-Boot] [PATCH v2 2/2] sunxi: enable distro spi boot command
Oskari Lemmela
- [U-Boot] [PATCH] sunxi: add spi flash bootcmd
Oskari Lemmelä
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Oskari Lemmelä
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Oskari Lemmelä
- [U-Boot] [PATCH] pinctrl: imx: Fix select input issue
Ye Li
- [U-Boot] [PATCH] imx: Fix potential lmb memory overwritten by stack
Ye Li
- [U-Boot] [PATCH] imx: video: Fix return value issue
Ye Li
- [U-Boot] [PATCH] arm: Round the dma_alloc_coherent memory size to cache line aligned
Ye Li
- [U-Boot] [PATCH] spi: mxc_spi: Fix build warning on ARM64 platforms
Ye Li
- [U-Boot] [PATCH] env: sata: Add missed env location for SATA boot
Ye Li
- [U-Boot] [PATCH] usb: xhci-mem: Fix scratchpad array issue
Ye Li
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Ye Li
- [U-Boot] [PATCH] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue
Ye Li
- [U-Boot] [PATCH] mtd: spi: Add 4bytes extend address support
Ye Li
- [U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
Ye Li
- [U-Boot] [PATCH] spi: qspi: Fix issue when booting with DDR mode
Ye Li
- [U-Boot] [PATCH] mtd: qspi: support read the flag status in fspi driver
Ye Li
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix wp_enable issue
Ye Li
- [U-Boot] [PATCH] env: sata: Fix saveenv issue
Ye Li
- [U-Boot] [PATCH] imx: Check the PL310 version for applying errata
Ye Li
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Ye Li
- [U-Boot] Problems to boot i.MX8QXP EVK board
Breno Matheus Lima
- [U-Boot] Problems to boot i.MX8QXP EVK board
Breno Matheus Lima
- [U-Boot] Problems to boot i.MX8QXP EVK board
Breno Matheus Lima
- [U-Boot] [PATCH] Revert "tools: imx8image: set dcd_skip to true"
Breno Matheus Lima
- [U-Boot] [PATCH 0/6] doc: imx: habv4: Improve iMX6 and iMX7 secure boot documentation
Breno Matheus Lima
- [U-Boot] [PATCH 1/6] doc: imx: habv4: Remove extra hab directory for a cleaner documentation structure
Breno Matheus Lima
- [U-Boot] [PATCH 2/6] doc: imx: habv4: Add HABv4 introduction
Breno Matheus Lima
- [U-Boot] [PATCH 3/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 non-SPL targets
Breno Matheus Lima
- [U-Boot] [PATCH 4/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 SPL targets
Breno Matheus Lima
- [U-Boot] [PATCH 5/6] doc: imx: habv4: Move encrypted boot guide
Breno Matheus Lima
- [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Breno Matheus Lima
- [U-Boot] Problems to build i.MX8MQ EVK board
Breno Matheus Lima
- [U-Boot] Problems to build i.MX8MQ EVK board
Breno Matheus Lima
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Leif Lindholm
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Leif Lindholm
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Leif Lindholm
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Leif Lindholm
- [U-Boot] [PULL] efi patch queue 2019-01-28
Leif Lindholm
- [U-Boot] [PATCH 0/2] Board support updates for topic-miamiplus modules
Mike Looijmans
- [U-Boot] [PATCH 1/2] topic-miamiplus: Run CPU at 800MHz for speedgrade-2
Mike Looijmans
- [U-Boot] [PATCH 2/2] board: topic-miamiplus: Run IO PLL at 1000 MHz
Mike Looijmans
- [U-Boot] [PATCH 2/4] board: topic_miamilite: Support cost-reduced version
Mike Looijmans
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Mike Looijmans
- [U-Boot] [PATCH] pylibfdt: Use Python 2 in Makefile
Josef Lusticky
- [U-Boot] [PATCH] powerpc/t104xrdb: Add new module of DDR for T1040DRDB board
Peng Ma
- [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: ls1043a: move SCSI_AHCI and SCSI form arch/arm/cpu/armv8/fsl-layerscape/Kconfig to arch/arm/Kconfig
Peng Ma
- [U-Boot] [PATCH 2/7] configs: ls1043aqds: enable sata configs for all ls1043aqds defconfigs
Peng Ma
- [U-Boot] [PATCH 3/7] configs: ls1046a: enable sata configs for all ls1046a defconfigs
Peng Ma
- [U-Boot] [PATCH 4/7] configs: ls1088a: enable sata configs for all ls1088a defconfigs
Peng Ma
- [U-Boot] [PATCH 5/7] configs: ls208xa: enable sata configs for all ls208xa defconfigs
Peng Ma
- [U-Boot] [PATCH 6/7] configs: ls1012afrwy: enable sata configs for all ls1012afrwy defconfigs
Peng Ma
- [U-Boot] [PATCH 7/7] configs: ls1021a: enable sata configs for all ls1021a defconfigs
Peng Ma
- [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: ls1043a: move SCSI_AHCI and SCSI form arch/arm/cpu/armv8/fsl-layerscape/Kconfig to arch/arm/Kconfig
Peng Ma
- [U-Boot] [PATCH 2/7] configs: ls1043aqds: enable sata configs for all ls1043aqds defconfigs
Peng Ma
- [U-Boot] [PATCH 3/7] configs: ls1046a: enable sata configs for all ls1046a defconfigs
Peng Ma
- [U-Boot] [PATCH 4/7] configs: ls1088a: enable sata configs for all ls1088a defconfigs
Peng Ma
- [U-Boot] [PATCH 5/7] configs: ls208xa: enable sata configs for all ls208xa defconfigs
Peng Ma
- [U-Boot] [PATCH 6/7] configs: ls1012afrwy: enable sata configs for all ls1012afrwy defconfigs
Peng Ma
- [U-Boot] [PATCH 7/7] configs: ls1021a: enable sata configs for all ls1021a defconfigs
Peng Ma
- [U-Boot] [PATCH v1 00/14] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Lukasz Majewski
- [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Lukasz Majewski
- [U-Boot] [PATCH v1 03/14] tpc70: Provide board_boot_order() function to distinct between eMMC and SD boot
Lukasz Majewski
- [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
Lukasz Majewski
- [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Lukasz Majewski
- [U-Boot] [PATCH v1 06/14] DM: tpc70: led: Enable LED default state
Lukasz Majewski
- [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
Lukasz Majewski
- [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes
Lukasz Majewski
- [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver
Lukasz Majewski
- [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6)
Lukasz Majewski
- [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks
Lukasz Majewski
- [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number
Lukasz Majewski
- [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description
Lukasz Majewski
- [U-Boot] [PATCH v1 14/14] imx: tpc70: Convert TPC70 (imx6q based) board to use DM/DTS in SPL and u-boot
Lukasz Majewski
- [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
Lukasz Majewski
- [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver
Lukasz Majewski
- [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks
Lukasz Majewski
- [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description
Lukasz Majewski
- [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6)
Lukasz Majewski
- [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes
Lukasz Majewski
- [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
Lukasz Majewski
- [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Lukasz Majewski
- [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Lukasz Majewski
- [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Lukasz Majewski
- [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number
Lukasz Majewski
- [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
Lukasz Majewski
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Lukasz Majewski
- [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
Lukasz Majewski
- [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Lukasz Majewski
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Lukasz Majewski
- [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
Lukasz Majewski
- [U-Boot] Issue faced due to "serial: Remove DM_FLAG_PRE_RELOC flag in various drivers" patch
Lukasz Majewski
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Lukasz Majewski
- [U-Boot] [PATCH] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition
Lukasz Majewski
- [U-Boot] [PATCH] imx6q_logic: Enable MMC booting from SPL
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Lukasz Majewski
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Lukasz Majewski
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Lukasz Majewski
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Lukasz Majewski
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Lukasz Majewski
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Lukasz Majewski
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Lukasz Majewski
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Lukasz Majewski
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Lukasz Majewski
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Lukasz Majewski
- [U-Boot] [PATCH] Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Lukasz Majewski
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Lukasz Majewski
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Lukasz Majewski
- [U-Boot] [PATCH PATCH v2 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Lukasz Majewski
- [U-Boot] [PATCH] mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED
Lukasz Majewski
- [U-Boot] [PATCH] of-platdata: improve documentation
Lukasz Majewski
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Lukasz Majewski
- [U-Boot] [PATCH v1 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Lukasz Majewski
- [U-Boot] [PATCH v1 02/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Lukasz Majewski
- [U-Boot] [PATCH v1 03/21] net: Kconfig: FEC: Add dependency on VF610
Lukasz Majewski
- [U-Boot] [PATCH v1 04/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Lukasz Majewski
- [U-Boot] [PATCH v1 05/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v1 06/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function
Lukasz Majewski
- [U-Boot] [PATCH v1 07/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Lukasz Majewski
- [U-Boot] [PATCH v1 08/21] pcm052: board: vybrid: Update the board name for BK4 device
Lukasz Majewski
- [U-Boot] [PATCH v1 09/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Lukasz Majewski
- [U-Boot] [PATCH v1 10/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c
Lukasz Majewski
- [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Lukasz Majewski
- [U-Boot] [PATCH v1 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
Lukasz Majewski
- [U-Boot] [PATCH v1 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Lukasz Majewski
- [U-Boot] [PATCH v1 14/21] config: bk4: Update include/configs/bk4r1.h file
Lukasz Majewski
- [U-Boot] [PATCH v1 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)
Lukasz Majewski
- [U-Boot] [PATCH v1 16/21] config: bk4: Update u-boot script to support recovery via SD card
Lukasz Majewski
- [U-Boot] [PATCH v1 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup
Lukasz Majewski
- [U-Boot] [PATCH v1 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery
Lukasz Majewski
- [U-Boot] [PATCH v1 19/21] pcm052: board: Add code to setup LED default states
Lukasz Majewski
- [U-Boot] [PATCH v1 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
Lukasz Majewski
- [U-Boot] [PATCH v1 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
Lukasz Majewski
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Lukasz Majewski
- [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Lukasz Majewski
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Lukasz Majewski
- [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Lukasz Majewski
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Lukasz Majewski
- [U-Boot] [RFC 09/17] arm: imx: Add FIT SPL its
Lukasz Majewski
- [U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files
Lukasz Majewski
- [U-Boot] [PATCH v1 00/15] imx: dm: Update mccmon6 board to only use DM/DTS in u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v1 01/15] ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
Lukasz Majewski
- [U-Boot] [PATCH v1 02/15] ARM: imx: config: Disable support for USB on MCCMON6
Lukasz Majewski
- [U-Boot] [PATCH v1 03/15] net: imx: Add support for waiting some time after FEC gpio reset
Lukasz Majewski
- [U-Boot] [PATCH v1 04/15] clk: imx: Rename and export get_usdhc_clk() to imx6_get_usdhc_clk()
Lukasz Majewski
- [U-Boot] [PATCH v1 05/15] clk: imx: Rename and export get_cspi_clk() to imx6_get_cspi_clk()
Lukasz Majewski
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Lukasz Majewski
- [U-Boot] [PATCH v1 07/15] spi: imx: Add support for 'per' clock enabling via driver model
Lukasz Majewski
- [U-Boot] [PATCH v1 08/15] ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v1 09/15] ARM: imx: Decouple mccmon6's SPL and u-boot proper code
Lukasz Majewski
- [U-Boot] [PATCH v1 10/15] ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
Lukasz Majewski
- [U-Boot] [PATCH v1 11/15] Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used
Lukasz Majewski
- [U-Boot] [PATCH v1 12/15] Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS
Lukasz Majewski
- [U-Boot] [PATCH v1 13/15] Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset
Lukasz Majewski
- [U-Boot] [PATCH v1 14/15] doc: Update parallel NOR flash related information in README.falcon
Lukasz Majewski
- [U-Boot] [PATCH v1 15/15] imx: Convert mccmon6 to use fitImage instead of uImage+DTB
Lukasz Majewski
- [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [PATCH v2 01/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Lukasz Majewski
- [U-Boot] [PATCH v2 02/21] net: Kconfig: FEC: Add dependency on VF610
Lukasz Majewski
- [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Lukasz Majewski
- [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v2 05/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function
Lukasz Majewski
- [U-Boot] [PATCH v2 06/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Lukasz Majewski
- [U-Boot] [PATCH v2 07/21] pcm052: board: vybrid: Update the board name for BK4 device
Lukasz Majewski
- [U-Boot] [PATCH v2 08/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Lukasz Majewski
- [U-Boot] [PATCH v2 09/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c
Lukasz Majewski
- [U-Boot] [PATCH v2 10/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
Lukasz Majewski
- [U-Boot] [PATCH v2 11/21] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties
Lukasz Majewski
- [U-Boot] [PATCH v2 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
Lukasz Majewski
- [U-Boot] [PATCH v2 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Lukasz Majewski
- [U-Boot] [PATCH v2 14/21] config: bk4: Update include/configs/bk4r1.h file
Lukasz Majewski
- [U-Boot] [PATCH v2 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)
Lukasz Majewski
- [U-Boot] [PATCH v2 16/21] config: bk4: Update u-boot script to support recovery via SD card
Lukasz Majewski
- [U-Boot] [PATCH v2 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup
Lukasz Majewski
- [U-Boot] [PATCH v2 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery
Lukasz Majewski
- [U-Boot] [PATCH v2 19/21] pcm052: board: Add code to setup LED default states
Lukasz Majewski
- [U-Boot] [PATCH v2 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
Lukasz Majewski
- [U-Boot] [PATCH v2 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
Lukasz Majewski
- [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Lukasz Majewski
- [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Lukasz Majewski
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Lukasz Majewski
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Lukasz Majewski
- [U-Boot] [PATCH v1 1/4] usb: ether: call _usb_eth_halt() if initialization fails
Lukasz Majewski
- [U-Boot] dfu broken on rk3288 dwc2_otg
Lukasz Majewski
- [U-Boot] [PATCH v3 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Lukasz Majewski
- [U-Boot] [PATCH v3 2/7] dfu: Make DFU support more SPL friendly
Lukasz Majewski
- [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL
Lukasz Majewski
- [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Lukasz Majewski
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Lukasz Majewski
- [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its
Lukasz Majewski
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Lukasz Majewski
- [U-Boot] Two u boot environment on eMMC
Lukasz Majewski
- [U-Boot] [PATCH v1 0/3] Add support for symlink creation in EXT4
Lukasz Majewski
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Lukasz Majewski
- [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 10/20] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Lukasz Majewski
- [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Lukasz Majewski
- [U-Boot] [PATCH] dfu: mmc: call fs functions instead of run_command
Lukasz Majewski
- [U-Boot] [PATCH] dfu: mmc: call fs functions instead of run_command
Lukasz Majewski
- [U-Boot] [PATCH v2 00/17] imx: dm: Update mccmon6 board to only use DM/DTS in u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v2 01/17] dm: Fix documentation entry as there is no UCLASS_CLOCK uclass
Lukasz Majewski
- [U-Boot] [PATCH v2 02/17] cmd: Do not show frequency for clocks which .get_rate() return error
Lukasz Majewski
- [U-Boot] [PATCH v2 03/17] dm: clk: Define clk_get_parent_rate() for clk operations
Lukasz Majewski
- [U-Boot] [PATCH v2 04/17] dm: clk: Define clk_get_by_id() for clk operations
Lukasz Majewski
- [U-Boot] [PATCH v2 05/17] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: 5.0-rc3)
Lukasz Majewski
- [U-Boot] [PATCH v2 06/17] ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
Lukasz Majewski
- [U-Boot] [PATCH v2 07/17] ARM: imx: config: Disable support for USB on MCCMON6
Lukasz Majewski
- [U-Boot] [PATCH v2 08/17] net: imx: Add support for waiting some time after FEC gpio reset
Lukasz Majewski
- [U-Boot] [PATCH v2 09/17] spi: imx: Add support for 'per' clock enabling via driver model
Lukasz Majewski
- [U-Boot] [PATCH v2 10/17] ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v2 11/17] ARM: imx: Decouple mccmon6's SPL and u-boot proper code
Lukasz Majewski
- [U-Boot] [PATCH v2 12/17] ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
Lukasz Majewski
- [U-Boot] [PATCH v2 13/17] Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used
Lukasz Majewski
- [U-Boot] [PATCH v2 14/17] Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS
Lukasz Majewski
- [U-Boot] [PATCH v2 15/17] Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset
Lukasz Majewski
- [U-Boot] [PATCH v2 16/17] doc: Update parallel NOR flash related information in README.falcon
Lukasz Majewski
- [U-Boot] [PATCH v2 17/17] imx: Convert mccmon6 to use fitImage instead of uImage+DTB
Lukasz Majewski
- [U-Boot] [PATCH v2 04/17] dm: clk: Define clk_get_by_id() for clk operations
Lukasz Majewski
- [U-Boot] [PATCH v2 03/17] dm: clk: Define clk_get_parent_rate() for clk operations
Lukasz Majewski
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Lukasz Majewski
- [U-Boot] input in flex scanner failed (for rpi_0_w_defconfig)
Belisko Marek
- [U-Boot] [PATCH 1/1] sunxi: board: Add i2c initialization for sun50i
Stefan Mavrodiev
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Tom McLeod
- [U-Boot] [PATCH] sun50i: h5: Orange Pi Zero Plus: Fix SdCard detection
Hauke Mehrtens
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Bin Meng
- [U-Boot] [PATCH v2 2/7] riscv: move the AX25-specific implementation of flush_dcache_all
Bin Meng
- [U-Boot] [PATCH v2 3/7] riscv: use invalidate/flush_*cache_range functions in cache.c
Bin Meng
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Bin Meng
- [U-Boot] Bogus message about SCSI during build
Bin Meng
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Bin Meng
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Bin Meng
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH v2 01/11] riscv: Rename cpu/qemu to cpu/generic
Bin Meng
- [U-Boot] [PATCH v2 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Bin Meng
- [U-Boot] [PATCH v2 10/11] cpu: Bind timer driver for boot hart
Bin Meng
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Bin Meng
- [U-Boot] [PATCH] pci: Add PCI_SLOT macro to include/pci.h
Bin Meng
- [U-Boot] U-Boot and USB 3.0
Bin Meng
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Bin Meng
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Bin Meng
- [U-Boot] [PATCH v2] x86: tsc: Add support for native calibration of TSC freq
Bin Meng
- [U-Boot] [PATCH v3] x86: tsc: Add support for native calibration of TSC freq
Bin Meng
- [U-Boot] [PATCH v1 1/2] doc: Fix CONFIG_OF_SEPARATE description
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: edison: Switch to CONFIG_OF_SEPARATE
Bin Meng
- [U-Boot] U-Boot and USB 3.0
Bin Meng
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Bin Meng
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Bin Meng
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Bin Meng
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Bin Meng
- [U-Boot] [PATCH 1/4 v3] pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr
Bin Meng
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Bin Meng
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Bin Meng
- [U-Boot] [PATCH 2/3] x86: Don't copy the cpu_call64() function to a hardcoded address
Bin Meng
- [U-Boot] [PATCH 3/3] x86: Use the existing GDT in the ROM for 64-bit U-Boot proper
Bin Meng
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Bin Meng
- [U-Boot] [PATCH v3] x86: tsc: Add support for native calibration of TSC freq
Bernhard Messerklinger
- [U-Boot] rk3288: firefly: flashing emmc from maskrom using USB
Jack Mitchell
- [U-Boot] rk3288: firefly: flashing emmc from maskrom using USB
Jack Mitchell
- [U-Boot] dfu broken on rk3288 dwc2_otg
Jack Mitchell
- [U-Boot] dfu broken on rk3288 dwc2_otg
Jack Mitchell
- [U-Boot] dfu broken on rk3288 dwc2_otg
Jack Mitchell
- [U-Boot] [PATCH 1/2] board: tbs2910: Add u-boot.imx size limit check
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] mmc: bring back partition init for non-DM MMC drivers
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Sören Moch
- [U-Boot] [PATCH v4 0/8] rk3399-puma: Enable PWM regulator for RK3399-Q7
Christoph Muellner
- [U-Boot] [PATCH v4 1/8] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Christoph Muellner
- [U-Boot] [PATCH v4 2/8] power: regulator: Allow PWM regulator to be omitted from SPL.
Christoph Muellner
- [U-Boot] [PATCH v4 3/8] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Christoph Muellner
- [U-Boot] [PATCH v4 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Christoph Muellner
- [U-Boot] [PATCH v4 5/8] rockchip: rk3399: Add improved pinctrl driver.
Christoph Muellner
- [U-Boot] [PATCH v4 6/8] rockchip: rk3399: Add Kconfig option for full pinctrl driver
Christoph Muellner
- [U-Boot] [PATCH v4 7/8] rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.
Christoph Muellner
- [U-Boot] [PATCH v4 8/8] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Christoph Muellner
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jon Nettleton
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jon Nettleton
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jon Nettleton
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Dinh Nguyen
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Dinh Nguyen
- [U-Boot] [PATCH] ARM: chiliboard: enable DM_SPI
Marcin Niestroj
- [U-Boot] [RESEND PATCH 0/3] ARM: liteboard: move towards driver model and device-tree boot
Marcin Niestroj
- [U-Boot] [RESEND PATCH 1/3] ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard
Marcin Niestroj
- [U-Boot] [RESEND PATCH 2/3] ARM: liteboard: move towards driver model and device-tree boot
Marcin Niestroj
- [U-Boot] [RESEND PATCH 3/3] ARM: liteboard: use random ethaddr
Marcin Niestroj
- [U-Boot] [PATCH] am335x: chilisom: Initial support for different DDR3 chips
Marcin Niestrój
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Tomas Novotny
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Tomas Novotny
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Sean Nyekjaer
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Sean Nyekjaer
- [U-Boot] [PATCH] cmd: fastboot: handle watchdog while waiting for fastboot commands.
Sean Nyekjaer
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Sean Nyekjaer
- [U-Boot] [PATCH] arm: stm32mp1: deploy spl in root folder
Sean Nyekjaer
- [U-Boot] [PATCHv1] arm: stm32mp1: deploy spl in root folder
Sean Nyekjær
- [U-Boot] [PATCH 0/8] Convert i.MX7 WaRP7 ports to DM
Bryan O'Donoghue
- [U-Boot] [PATCH 1/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Bryan O'Donoghue
- [U-Boot] [PATCH 2/8] arm: imx7s-warp: Add DT file hooks
Bryan O'Donoghue
- [U-Boot] [PATCH 3/8] arm: imx7s-warp: Convert to DM MMC initialization
Bryan O'Donoghue
- [U-Boot] [PATCH 4/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
Bryan O'Donoghue
- [U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports
Bryan O'Donoghue
- [U-Boot] [PATCH 6/8] warp7: defconfig: Switch on DM GPIO for both warp7 ports
Bryan O'Donoghue
- [U-Boot] [PATCH 7/8] warp7: defconfig: Switch to DM for I2C
Bryan O'Donoghue
- [U-Boot] [PATCH 8/8] arm: imx7s-warp: Convert to DM PMIC
Bryan O'Donoghue
- [U-Boot] [PATCH 1/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Bryan O'Donoghue
- [U-Boot] [PATCH 3/8] arm: imx7s-warp: Convert to DM MMC initialization
Bryan O'Donoghue
- [U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports
Bryan O'Donoghue
- [U-Boot] [PATCH v2 0/8] Convert i.MX7 WaRP7 ports to DM
Bryan O'Donoghue
- [U-Boot] [PATCH v2 1/8] arm: dts: imx7: Correct spelling mistake in GPIO name
Bryan O'Donoghue
- [U-Boot] [PATCH v2 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Bryan O'Donoghue
- [U-Boot] [PATCH v2 3/8] arm: imx7s-warp: Add DT file hooks
Bryan O'Donoghue
- [U-Boot] [PATCH v2 4/8] arm: imx7s-warp: Convert to DM MMC initialization
Bryan O'Donoghue
- [U-Boot] [PATCH v2 5/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
Bryan O'Donoghue
- [U-Boot] [PATCH v2 6/8] warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
Bryan O'Donoghue
- [U-Boot] [PATCH v2 7/8] warp7: defconfig: Switch to DM for I2C
Bryan O'Donoghue
- [U-Boot] [PATCH v2 8/8] arm: imx7s-warp: Convert to DM PMIC
Bryan O'Donoghue
- [U-Boot] [PATCH v3 0/8] Convert i.MX7 WaRP7 ports to DM
Bryan O'Donoghue
- [U-Boot] [PATCH v3 1/8] arm: dts: imx7: Correct spelling mistake in GPIO name
Bryan O'Donoghue
- [U-Boot] [PATCH v3 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Bryan O'Donoghue
- [U-Boot] [PATCH v3 3/8] arm: imx7s-warp: Add DT file hooks
Bryan O'Donoghue
- [U-Boot] [PATCH v3 4/8] arm: imx7s-warp: Convert to DM MMC initialization
Bryan O'Donoghue
- [U-Boot] [PATCH v3 5/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
Bryan O'Donoghue
- [U-Boot] [PATCH v3 6/8] warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
Bryan O'Donoghue
- [U-Boot] [PATCH v3 7/8] warp7: defconfig: Switch to DM for I2C
Bryan O'Donoghue
- [U-Boot] [PATCH v3 8/8] arm: imx7s-warp: Convert to DM PMIC
Bryan O'Donoghue
- [U-Boot] [PATCH] cmd: image_info: Add checking of default FIT config
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 0/8] Convert i.MX7 WaRP7 ports to DM
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 1/8] arm: dts: imx7: Correct spelling mistake in GPIO name
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 3/8] arm: imx7s-warp: Add DT file hooks
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 4/8] arm: imx7s-warp: Convert to DM MMC initialization
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 5/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 6/8] warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 7/8] warp7: defconfig: Switch to DM for I2C
Bryan O'Donoghue
- [U-Boot] [RESEND] [PATCH v3 8/8] arm: imx7s-warp: Convert to DM PMIC
Bryan O'Donoghue
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Bryan O'Donoghue
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Bryan O'Donoghue
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Bryan O'Donoghue
- [U-Boot] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Joris Offouga
- [U-Boot] [RFC 2/9] Arm: imx7d-pico: Add DT file hooks
Joris Offouga
- [U-Boot] [RFC 3/9] pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
Joris Offouga
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Joris Offouga
- [U-Boot] [RFC 5/9] pico-pi-imx7d: defconfig: Switch to DM for I2C
Joris Offouga
- [U-Boot] [RFC 6/9] pico-imx7d-pico: defconfig: Switch to DM for UART
Joris Offouga
- [U-Boot] [RFC 7/9] pico-imx7d: Convert to DM PMIC
Joris Offouga
- [U-Boot] [RFC 8/9] arm: pico-pi-imx7d: Convert to DM USB
Joris Offouga
- [U-Boot] [RFC 9/9] pico-imx7d: Convert to DM Ethernet
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Joris Offouga
- [U-Boot] [PATCH u-boot 1/2] net: phy: Add support for accessing MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v2 0/3] net: phy: allow disabling SmartEEE for Atheros PHYs
Vladimir Oltean
- [U-Boot] [PATCH v2 1/3] net: phy: ar803x: Use phy_read_mmd and phy_write_mmd functions
Vladimir Oltean
- [U-Boot] [PATCH v2 2/3] net: phy: ar803x: Address packet drops at low traffic rate due to SmartEEE feature
Vladimir Oltean
- [U-Boot] [PATCH v2 3/3] net: phy: ar803x: Use common functions for RGMII internal delays
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v2 3/3] net: phy: ar803x: Use common functions for RGMII internal delays
Vladimir Oltean
- [U-Boot] [PATCH v2 1/3] net: phy: ar803x: Use phy_read_mmd and phy_write_mmd functions
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v3 0/6] net: phy: Allow disabling SmartEEE for Atheros PHYs
Vladimir Oltean
- [U-Boot] [PATCH v3 1/6] net: phy: ar803x: Address packet drops at low traffic rate due to SmartEEE feature
Vladimir Oltean
- [U-Boot] [PATCH v3 2/6] net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035
Vladimir Oltean
- [U-Boot] [PATCH v3 3/6] net: phy: ar803x: Use common functions for RGMII internal delays
Vladimir Oltean
- [U-Boot] [PATCH v3 4/6] net: phy: ar803x: Explicitly disable RGMII delays
Vladimir Oltean
- [U-Boot] [PATCH v3 5/6] net: phy: ar803x: Clarify the configuration of the CLK_25M output pin
Vladimir Oltean
- [U-Boot] [PATCH v3 6/6] net: phy: ar803x: Clarify the intention of ar8021_config
Vladimir Oltean
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Ooi, Joyce
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v2 1/7] cmd: part: Add 'number' sub-command
Igor Opaniuk
- [U-Boot] [PATCH v2 6/7] doc: android: Add simple guide for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v2 4/7] cmd: Add 'ab_select' command
Igor Opaniuk
- [U-Boot] [PATCH v2 3/7] common: Implement A/B metadata
Igor Opaniuk
- [U-Boot] [PATCH v2 7/7] env: am57xx: Implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v3 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [RESEND v3 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v1 1/1] arm64: dt: poplar: add optee node
Igor Opaniuk
- [U-Boot] [U-Boot, RESEND, v3, 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [RESEND PATCH v4 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Igor Opaniuk
- [U-Boot] [PATCH 3/3] poplar: enable Ethernet driver support
Igor Opaniuk
- [U-Boot] [PATCH 1/3] reset: add reset driver for HiSilicon platform
Igor Opaniuk
- [U-Boot] [PATCH v2] ARM: mvebu: add support for Allied Telesis x530
Chris Packham
- [U-Boot] [PATCH v2] ARM: mvebu: add support for Allied Telesis x530
Chris Packham
- [U-Boot] [PATCH] common: Kconfig: miscellaneous spelling fixes
Chris Packham
- [U-Boot] [PATCH] arm64: mvebu: Add basic support for uDPU board
Chris Packham
- [U-Boot] [PATCH 00/10] Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 01/10] Kconfig: fix spelling
Chris Packham
- [U-Boot] [PATCH 02/10] common: spl: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 03/10] arm: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 04/10] x86: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 05/10] work_92105: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 06/10] drivers: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 07/10] i2c: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 08/10] pinctrl: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 09/10] video: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 10/10] lib: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 09/10] video: Kconfig: spelling fixes
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: armada-xp/37x/38x: Enable PCIe DT node
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: armada-xp/37x/38x: Enable PCIe DT node
Chris Packham
- [U-Boot] [PATCH 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Chris Packham
- [U-Boot] [PATCH 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Chris Packham
- [U-Boot] [PATCH] buildman: fix typo
Chris Packham
- [U-Boot] [PATCH] Kconfig: set default BUILD_TARGET for kirkwood
Chris Packham
- [U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Chris Packham
- [U-Boot] [PATCH 1/2] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Chris Packham
- [U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Chris Packham
- [U-Boot] [PATCH 1/3 v2] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Chris Packham
- [U-Boot] [PATCH] omap3_cairo: remove empty #ifdef/#endif block
Chris Packham
- [U-Boot] [PATCH v3] moveconfig: add a second pass for empty #if/#endif blocks
Chris Packham
- [U-Boot] [PATCH v3] moveconfig: add a second pass for empty #if/#endif blocks
Chris Packham
- [U-Boot] u-boot-fw-utils issue
Hardik Padhariya
- [U-Boot] [uboot-snps-arc] [PATCH v3 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Eugeniy Paltsev
- [U-Boot] [PATCH 1/2] mmc: mtk-sd: fix possible incomplete read ops
Fabien Parent
- [U-Boot] [PATCH 2/2] mmc: mtk-sd: fix SPL compilation when GPIO=y and SPL_GPIO=n
Fabien Parent
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 01/11] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 01/11] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH 06/11] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH 08/11] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH 09/11] drivers: serial: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH 10/11] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 01/11] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH 06/11] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH 08/11] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH 09/11] drivers: serial: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH 10/11] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v2 01/11] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v2 02/11] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v2 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v2 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v2 06/11] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v2 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v2 08/11] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v2 10/11] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v2 08/11] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v2 10/11] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v2 05/11] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v2 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v2 06/11] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v2 03/11] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v3 00/12] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v3 01/12] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v3 02/12] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v3 03/12] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v3 04/12] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v3 05/12] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v3 06/12] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v3 07/12] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v3 08/12] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v3 09/12] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v3 10/12] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v3 11/12] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v3 12/12] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v3 04/12] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v4 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v4 01/15] .gitignore: Don't ignore arch/riscv/include/asm/arch
Anup Patel
- [U-Boot] [PATCH v4 02/15] Makefile: Fix mrproper make target
Anup Patel
- [U-Boot] [PATCH v4 03/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v4 04/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v4 05/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v4 06/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v4 07/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v4 08/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v4 09/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v4 10/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v4 11/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v4 12/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v4 13/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v4 14/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v4 15/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH 11/11] riscv: Add SiFive FU540 board support
Atish Patra
- [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock
Atish Patra
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Atish Patra
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Atish Patra
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Atish Patra
- [U-Boot] RISC-V Open source Supervisor Binary Interface (OpenSBI) Version 0.1 Released
Atish Patra
- [U-Boot] [U-Boot, v2, 2/2] rockchip: fix incorrect detection of ram size
Marty E. Plummer
- [U-Boot] [PATCH v3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)
Marty E. Plummer
- [U-Boot] [PATCH v3 0/6] mips: mscc: gpio: Add MSCC serial GPIO driver
Lars Povlsen
- [U-Boot] [PATCH v3 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Lars Povlsen
- [U-Boot] [PATCH v3 2/6] mips: mscc_sgpio: Add DT bindings documentation
Lars Povlsen
- [U-Boot] [PATCH v3 3/6] mips: luton: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH v3 4/6] mips: luton: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH v3 5/6] mips: ocelot: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH v3 6/6] mips: ocelot: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH 0/2] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH 1/2] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH 2/2] mips: mscc: DT: Update luton device tree to use fast SPI driver
Lars Povlsen
- [U-Boot] [PATCH v2 0/3] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH v2 1/3] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH v2 2/3] mips: mscc: DT: Update luton device tree to use fast SPI driver
Lars Povlsen
- [U-Boot] [PATCH v2 3/3] mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.c
Lars Povlsen
- [U-Boot] [PATCH v3 0/3] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH v3 1/3] mips: spi: mscc: Add fast bitbang SPI driver
Lars Povlsen
- [U-Boot] [PATCH v3 2/3] mips: mscc: DT: Update luton device tree to use fast SPI driver
Lars Povlsen
- [U-Boot] [PATCH v3 3/3] mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.c
Lars Povlsen
- [U-Boot] [PATCH] net: phy: micrel: fix KSZ9031 clock skew for values greater 0ps
Andreas Pretzsch
- [U-Boot] [PATCH v1 1/2] dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports
Sam Protsenko
- [U-Boot] [PATCH] arm: ti: boot: Remove legacy Android partitions
Sam Protsenko
- [U-Boot] [PATCH] arm: ti: boot: Fix am57xx evm fdtfile name
Sam Protsenko
- [U-Boot] [PATCH 0/2] env: Fix "env save" to malformed environment
Sam Protsenko
- [U-Boot] [PATCH 1/2] env: common: Return specific error code on bad CRC
Sam Protsenko
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Sam Protsenko
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Sam Protsenko
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Sam Protsenko
- [U-Boot] [PATCH] sunxi: add spi flash bootcmd
Andre Przywara
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Andre Przywara
- [U-Boot] [PATCH] sunxi: add spi flash bootcmd
Andre Przywara
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Andre Przywara
- [U-Boot] [PATCH 0/3] arm: Introduce writel/readl_relaxed accessors
Andre Przywara
- [U-Boot] [PATCH 1/3] arm: clean up asm/io.h
Andre Przywara
- [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors
Andre Przywara
- [U-Boot] [PATCH 3/3] sunxi: H6: use writel_relaxed for DRAM timing register accesses
Andre Przywara
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH 0/9] sunxi: enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH 1/9] sunxi: clk: add MMC gates/resets
Andre Przywara
- [U-Boot] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Andre Przywara
- [U-Boot] [PATCH 3/9] mmc: sunxi: Add DM clk and reset support
Andre Przywara
- [U-Boot] [PATCH 4/9] mmc: sunxi: Add H6 support
Andre Przywara
- [U-Boot] [PATCH 5/9] mmc: sunxi: Add missing compatible strings
Andre Przywara
- [U-Boot] [PATCH 6/9] mmc: sunxi: Add A80 support
Andre Przywara
- [U-Boot] [PATCH 7/9] mmc: sunxi: Honour non-removable property in DT
Andre Przywara
- [U-Boot] [PATCH 8/9] arm: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH 9/9] mmc: sunxi: Mark end of DM_MMC #ifdefs
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Andre Przywara
- [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Andre Przywara
- [U-Boot] [PATCH 0/2] Fixes for MMC gates series
Andre Przywara
- [U-Boot] [PATCH 1/2] sunxi: board: do MMC pinmux setup for DM_MMC builds
Andre Przywara
- [U-Boot] [PATCH 2/2] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Andre Przywara
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Andre Przywara
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Andre Przywara
- [U-Boot] [PATCH 1/2] arm: sunxi: allwinner spi driver sun6i support
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH 7/9] mmc: sunxi: Honour non-removable property in DT
Andre Przywara
- [U-Boot] [PATCH v3.1 1/9] sunxi: clk: add MMC gates/resets
Andre Przywara
- [U-Boot] [linux-sunxi] Re: [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [linux-sunxi] Re: [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 2/9] sunxi: clk: add MMC gates/resets
Andre Przywara
- [U-Boot] [PATCH v4 3/9] sunxi: clk: A80: add MMC clock support
Andre Przywara
- [U-Boot] [PATCH v4 4/9] mmc: sunxi: Add remaining compatible strings
Andre Przywara
- [U-Boot] [PATCH v4 5/9] mmc: sunxi: Add DM_MMC support for H6
Andre Przywara
- [U-Boot] [PATCH v4 6/9] mmc: sunxi: Add DM clk and reset support
Andre Przywara
- [U-Boot] [PATCH v4 7/9] sunxi: board: do MMC pinmux setup for DM_MMC builds
Andre Przywara
- [U-Boot] [PATCH v4 8/9] arm: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Andre Przywara
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Andre Przywara
- [U-Boot] [PATCH 9/9] mmc: sunxi: Mark end of DM_MMC #ifdefs
Andre Przywara
- [U-Boot] [RFC PATCH 1/8] arm: actions: Add common framework for Actions Semi SoCs
André Przywara
- [U-Boot] [RFC PATCH 4/8] arm: board: Remove board files for bubblegum_96
André Przywara
- [U-Boot] [RFC PATCH 7/8] serial: actions: add uart support for s700
André Przywara
- [U-Boot] [RFC PATCH 2/8] arm: actions: Add owl memory map regions
André Przywara
- [U-Boot] [RFC PATCH 6/8] arm: add Cubieboard7 board support
André Przywara
- [U-Boot] [RFC PATCH 5/8] arm: actions: add S700 SoC device tree
André Przywara
- [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
André Przywara
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
André Przywara
- [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
André Przywara
- [U-Boot] [U-Boot, 2/2] mmc: bring back partition init for non-DM MMC drivers
André Przywara
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
André Przywara
- [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver
André Przywara
- [U-Boot] [PATCH v6 12/20] clk: sunxi: Implement UART resets
André Przywara
- [U-Boot] [PATCH v6 11/20] clk: sunxi: Implement UART clocks
André Przywara
- [U-Boot] [PATCH v6 13/20] clk: sunxi: Add Allwinner H6 CLK driver
André Przywara
- [U-Boot] [PATCH v6 14/20] sunxi: A64: Update sun50i-a64-ccu.h
André Przywara
- [U-Boot] [PATCH v6 15/20] sunxi: Enable CLK
André Przywara
- [U-Boot] [PATCH v2 2/9] arm: actions: Add owl memory map regions
André Przywara
- [U-Boot] [PATCH v2 6/9] arm: add Cubieboard7 board support
André Przywara
- [U-Boot] [PATCH v2 8/9] serial: actions: add uart support for s700
André Przywara
- [U-Boot] [PATCH v2 1/9] arm: actions: Add common framework for Actions Semi SoCs
André Przywara
- [U-Boot] [PATCH v3 3/9] clk: actions: Add common clock driver
André Przywara
- [U-Boot] [PATCH v2 1/9] arm: actions: Add common framework for Actions Semi SoCs
André Przywara
- [U-Boot] [PATCH v3 3/9] clk: actions: Add common clock driver
André Przywara
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
André Przywara
- [U-Boot] [PATCH 0/9] sunxi: enable DM_MMC
André Przywara
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
André Przywara
- [U-Boot] [PATCH v3 7/9] dm: mmc: sunxi: Add CLK and RESET support
André Przywara
- [U-Boot] [PATCH v3 1/9] sunxi: clk: add MMC gates/resets
André Przywara
- [U-Boot] [PATCH v3 3/9] mmc: sunxi: Add A83T emmc compatible
André Przywara
- [U-Boot] [PATCH v3 4/9] mmc: sunxi: Add mmc, emmc H5/A64 compatible
André Przywara
- [U-Boot] [PATCH v3 5/9] mmc: sunxi: Add DM_MMC support for H6
André Przywara
- [U-Boot] [PATCH v3 6/9] mmc: sunxi: Add DM_MMC support for A80
André Przywara
- [U-Boot] [PATCH v3 8/9] arm: sunxi: Enable DM_MMC
André Przywara
- [U-Boot] [RFC PATCH] bitops: Fix GENMASK definition for Sandbox
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Vignesh R
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Vignesh R
- [U-Boot] [PATCH] configs: am335x_evm: Enable DM_SPI and DM_SPI_FLASH
Vignesh R
- [U-Boot] [PATCH] configs: Remove unused am335x_evm defconfigs
Vignesh R
- [U-Boot] [PATCH] configs: Remove am43xx_evm_ethboot_defconfig
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 0/6] AM65x: Add DMA support
Vignesh R
- [U-Boot] [PATCH 1/6] firmware: ti_sci: Add support for NAVSS resource management
Vignesh R
- [U-Boot] [PATCH 2/6] soc: ti: k3: add navss ringacc driver
Vignesh R
- [U-Boot] [PATCH 3/6] soc: ti: k3: add CPPI5 description and helpers
Vignesh R
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH 5/6] arm64: dts: ti: k3-am65: add mcu navss nodes
Vignesh R
- [U-Boot] [PATCH 6/6] configs: am65x_evm_a53: Enable DMA related configs
Vignesh R
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH 1/6] firmware: ti_sci: Add support for NAVSS resource management
Vignesh R
- [U-Boot] [PATCH 2/6] soc: ti: k3: add navss ringacc driver
Vignesh R
- [U-Boot] [PATCH v2 0/7] AM65x: Add DMA support
Vignesh R
- [U-Boot] [PATCH v2 1/7] firmware: ti_sci: Add support for NAVSS resource management
Vignesh R
- [U-Boot] [PATCH v2 2/7] soc: ti: k3: add navss ringacc driver
Vignesh R
- [U-Boot] [PATCH v2 3/7] soc: ti: k3: add CPPI5 description and helpers
Vignesh R
- [U-Boot] [PATCH v2 4/7] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH v2 5/7] soc: keystone: Merge into ti specific directory
Vignesh R
- [U-Boot] [PATCH v2 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes
Vignesh R
- [U-Boot] [PATCH v2 7/7] configs: am65x_evm_a53: Enable DMA related configs
Vignesh R
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH] configs: Move CONFIG_SPI_FLASH into defconfigs
Vignesh R
- [U-Boot] [PATCH v2 09/11] configs: Remove SF_DUAL_FLASH
Vignesh R
- [U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers
Vignesh R
- [U-Boot] [PATCH v2 01/11] spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH v2 04/11] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 01/20] configs: Move CONFIG_SPI_FLASH into defconfigs
Vignesh R
- [U-Boot] [PATCH v3 02/20] bitops: Fix GENMASK definition for Sandbox
Vignesh R
- [U-Boot] [PATCH v3 03/20] spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes
Vignesh R
- [U-Boot] [PATCH v3 04/20] spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size
Vignesh R
- [U-Boot] [PATCH v3 05/20] spi: spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [PATCH v3 06/20] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH v3 07/20] sh: bitops: add hweight*() macros
Vignesh R
- [U-Boot] [PATCH v3 08/20] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH v3 09/20] mtd: spi: spi-nor-core: Add SPI MEM support
Vignesh R
- [U-Boot] [PATCH v3 10/20] mtd: spi: spi-nor-core: Add 4 Byte addressing support
Vignesh R
- [U-Boot] [PATCH v3 11/20] mtd: spi: spi-nor-core: Add SFDP support
Vignesh R
- [U-Boot] [PATCH v3 12/20] mtd: spi: spi-nor-core: Add back U-Boot specific features
Vignesh R
- [U-Boot] [PATCH v3 13/20] mtd: spi: sf_probe: Add "jedec, spi-nor" compatible string
Vignesh R
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 15/20] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH v3 17/20] spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL
Vignesh R
- [U-Boot] [PATCH v3 18/20] configs: Remove SF_DUAL_FLASH
Vignesh R
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v3 20/20] MAINTAINERS: Add an entry for SPI NOR
Vignesh R
- [U-Boot] [PATCH v3 0/7] AM65x: Add DMA support
Vignesh R
- [U-Boot] [PATCH v3 1/7] firmware: ti_sci: Add support for NAVSS resource management
Vignesh R
- [U-Boot] [PATCH v3 2/7] soc: ti: k3: add navss ringacc driver
Vignesh R
- [U-Boot] [PATCH v3 3/7] soc: ti: k3: add CPPI5 description and helpers
Vignesh R
- [U-Boot] [PATCH v3 4/7] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH v3 5/7] soc: keystone: Merge into TI specific directory
Vignesh R
- [U-Boot] [PATCH v3 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes
Vignesh R
- [U-Boot] [PATCH v3 7/7] configs: am65x_evm_a53: Enable DMA related configs
Vignesh R
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v3 02/20] bitops: Fix GENMASK definition for Sandbox
Vignesh R
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH 00/13] board: ge: initial dm support
Ian Ray
- [U-Boot] [PATCH 01/13] board: ge: bx50v3: Enable CONFIG_DM
Ian Ray
- [U-Boot] [PATCH 02/13] board: ge: bx50v3: Enable CONFIG_DM_MMC
Ian Ray
- [U-Boot] [PATCH 03/13] board: ge: bx50v3: Enable CONFIG_DM_GPIO
Ian Ray
- [U-Boot] [PATCH 04/13] board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH
Ian Ray
- [U-Boot] [PATCH 05/13] board: ge: ppd: Enable CONFIG_DM
Ian Ray
- [U-Boot] [PATCH 06/13] arm: imx: Add esdhc3/4 nodes to imx53.dtsi
Ian Ray
- [U-Boot] [PATCH 07/13] board: ge: ppd: Enable CONFIG_DM_MMC
Ian Ray
- [U-Boot] [PATCH 08/13] board: ge: store version information in fdt
Ian Ray
- [U-Boot] [PATCH 09/13] board: ge: bx50v3: Specific ARP timeout removed
Ian Ray
- [U-Boot] [PATCH 10/13] board: ge: bx50v3: Network booting of fitImage with nfs rootfs
Ian Ray
- [U-Boot] [PATCH 11/13] mx53ppd: bring dock out of reset at boot
Ian Ray
- [U-Boot] [PATCH 12/13] mx53ppd: fix unsupported set command
Ian Ray
- [U-Boot] [PATCH 13/13] bootcount: i2c: Delay after writing
Ian Ray
- [U-Boot] [PATCH] cmd: mtd: fix compilation warning for help when SYS_LONGHELP=n
Miquel Raynal
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Miquel Raynal
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Miquel Raynal
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Miquel Raynal
- [U-Boot] dumpimage: failure on null-padded image dumps
Chris Renshaw
- [U-Boot] [PATCH 1/6] watchdog: bcm6345: switch to raw I/O functions
Philippe Reynes
- [U-Boot] [PATCH 2/6] watchdog: bcm6345: allow to use this driver on arm
Philippe Reynes
- [U-Boot] [PATCH 3/6] dt: bcm6838: add watchdog
Philippe Reynes
- [U-Boot] [PATCH 4/6] dt: bcm6858: add watchdog
Philippe Reynes
- [U-Boot] [PATCH 5/6] bcm968380gerg_ram_defconfig: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH 6/6] bcm968580_ram_defconfig: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH] bcm968380gerg: disable SPI_FLASH
Philippe Reynes
- [U-Boot] [PATCH V2 1/6] watchdog: bcm6345: switch to raw I/O functions
Philippe Reynes
- [U-Boot] [PATCH V2 2/6] watchdog: bcm6345: allow to use this driver on arm
Philippe Reynes
- [U-Boot] [PATCH V2 3/6] dt: bcm6838: add watchdog
Philippe Reynes
- [U-Boot] [PATCH V2 4/6] dt: bcm6858: add watchdog
Philippe Reynes
- [U-Boot] [PATCH V2 5/6] bcm968380gerg: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH V2 6/6] bcm968580: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH V3 1/6] watchdog: bcm6345: switch to raw I/O functions
Philippe Reynes
- [U-Boot] [PATCH V3 2/6] watchdog: bcm6345: allow to use this driver on arm bcm6858
Philippe Reynes
- [U-Boot] [PATCH V3 3/6] dt: bcm6838: add watchdog
Philippe Reynes
- [U-Boot] [PATCH V3 4/6] dt: bcm6858: add watchdog
Philippe Reynes
- [U-Boot] [PATCH V3 5/6] bcm968380gerg: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH V3 6/6] bcm968580: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] [PATCH 1/5] bcm63158: add initial support
Philippe Reynes
- [U-Boot] [PATCH 2/5] bcm963158: add initial support
Philippe Reynes
- [U-Boot] [PATCH 3/5] watchdog: bcm6345: allow to use this driver on arm bcm63158
Philippe Reynes
- [U-Boot] [PATCH 4/5] dt: bcm63158: add watchdog
Philippe Reynes
- [U-Boot] [PATCH 5/5] bcm963158: enable watchdog and reboot with watchdog
Philippe Reynes
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [U-Boot, 1/3] bootm: vxworks: Make do_bootvx_fdt() static
Tom Rini
- [U-Boot] [U-Boot, 2/3] bootm: vxworks: Make do_bootm_vxworks() non-static
Tom Rini
- [U-Boot] [U-Boot,3/3] riscv: bootm: Support booting VxWorks
Tom Rini
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Tom Rini
- [U-Boot] [PATCH] Kconfig: don't pollute Kconfig w/ i.MX8M options for everyone
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip fixes for 2019.1
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [V2] please pull u-boot-samsung master
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] [ANN] Delaying v2019.01 until the 14th
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [V3] please pull u-boot-samsung master
Tom Rini
- [U-Boot] Bogus message about SCSI during build
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PATCH] Makefile: Correct logic for DM_SCSI + unconverted drivers check
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.01-rc3 released
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Tom Rini
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Tom Rini
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Tom Rini
- [U-Boot] [U-Boot, 2/2] mmc: bring back partition init for non-DM MMC drivers
Tom Rini
- [U-Boot] [U-Boot, 2/2] mmc: bring back partition init for non-DM MMC drivers
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190101
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [U-Boot, 1/2] sunxi: drop default SPL_LIBDISK_SUPPORT enablement
Tom Rini
- [U-Boot] [U-Boot, 2/2] mmc: bring back partition init for non-DM MMC drivers
Tom Rini
- [U-Boot] Add a github template telling people to not use pull requests there
Tom Rini
- [U-Boot] [U-Boot, 1/2] igep003x: MAINTAINER: Remove myself as maintainer and add Javier
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] dm: pci: MIGRATION: Add migration plan for PCI
Tom Rini
- [U-Boot] [U-Boot, v3, 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Tom Rini
- [U-Boot] [U-Boot,1/1] doc: README.commands: fix type
Tom Rini
- [U-Boot] arm: Round the dma_alloc_coherent memory size to cache line aligned
Tom Rini
- [U-Boot] env: sata: Add missed env location for SATA boot
Tom Rini
- [U-Boot] [U-Boot, v1, 1/2] gpio: stm32f7: Fix gpio bank hole management
Tom Rini
- [U-Boot] [U-Boot,v1,2/2] gpio: stm32f7: Fix SPL code size
Tom Rini
- [U-Boot] arm: ti: boot: Remove legacy Android partitions
Tom Rini
- [U-Boot] env: sata: Fix saveenv issue
Tom Rini
- [U-Boot] Makefile: Correct logic for DM_SCSI + unconverted drivers check
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH] pylibfdt: Use Python 2 in Makefile
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190110
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [linux-sunxi] [PATCH 2/3] tools: mkimage: Add Allwinner eGON support
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Tom Rini
- [U-Boot] [PATCH] Revert "fs: fat: assign rootdir sector when accessing root directory"
Tom Rini
- [U-Boot] memcpy/memset on arm64 platforms
Tom Rini
- [U-Boot] Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PATCH] Revert "fs: fat: assign rootdir sector when accessing root directory"
Tom Rini
- [U-Boot] [PATCH 0/2] Enable fastboot support for Poplar board
Tom Rini
- [U-Boot] poplar: save environment at a different offset
Tom Rini
- [U-Boot] [PATCH] serial: Get rid of CONFIG_DW_SERIAL
Tom Rini
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Tom Rini
- [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Tom Rini
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Tom Rini
- [U-Boot] [U-Boot, v2] imx8mq_evk_defconfig: Move file system options to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2] mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
Tom Rini
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Tom Rini
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.01 released
Tom Rini
- [U-Boot] [PATCH v10 00/10] Fix CVE-2018-18440 and CVE-2018-18439
Tom Rini
- [U-Boot] configs: Enable CONFIG_BLK in a few TI boards
Tom Rini
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Tom Rini
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Tom Rini
- [U-Boot] mmc: hi6220_dw_mmc: add driver model support
Tom Rini
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Tom Rini
- [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] mmc: Convert HI6220 MMC driver to driver model
Tom Rini
- [U-Boot] [U-Boot, v4, 3/6] common: command: Rework the 'cmd is repeatable' logic
Tom Rini
- [U-Boot] [U-Boot,RFC] blk: Increase cache element size
Tom Rini
- [U-Boot] [U-Boot, v4, 1/6] common: command: Fix command auto-completion
Tom Rini
- [U-Boot] [U-Boot, v4, 2/6] common: command: Expose a generic helper to auto-complete sub commands
Tom Rini
- [U-Boot] [U-Boot, v4, 3/6] common: command: Rework the 'cmd is repeatable' logic
Tom Rini
- [U-Boot] [U-Boot, v4, 4/6] command: commands: Add macros to declare commands with subcmds
Tom Rini
- [U-Boot] [U-Boot, v4, 5/6] cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands
Tom Rini
- [U-Boot] [U-Boot, v4, 6/6] cmd: adc: Use the sub-command infrastructure
Tom Rini
- [U-Boot] [U-Boot,v2] adding saveenv-command for bananapi r2
Tom Rini
- [U-Boot] [U-Boot, v2] common: command: Add support for $ auto-completion
Tom Rini
- [U-Boot] misc: fs_loader: Switching private data allocation to DM auto allocation
Tom Rini
- [U-Boot] test: bootcount: add bootcount-uclass test
Tom Rini
- [U-Boot] am57xx_evm_defconfig: Enable YMODEM support
Tom Rini
- [U-Boot] [U-Boot,v2] image: fix compiling without CMD_FDT
Tom Rini
- [U-Boot] [U-Boot,1/2] poplar: add DWC2 OTG gadget support
Tom Rini
- [U-Boot] [U-Boot, 2/2] poplar_defconfig: enable fastboot support
Tom Rini
- [U-Boot] [U-Boot, 03/11] reset: MedaiTek: add reset controller driver for MediaTek SoCs
Tom Rini
- [U-Boot] [U-Boot, 04/11] clk: MediaTek: bind ethsys reset controller
Tom Rini
- [U-Boot] [U-Boot, 05/11] ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
Tom Rini
- [U-Boot] [U-Boot, 06/11] arm: dts: add ethernet related node for MT7623 SoC
Tom Rini
- [U-Boot] [U-Boot, 07/11] arm: dts: add ethernet related node for MT7629 SoC
Tom Rini
- [U-Boot] [U-Boot, 08/11] arm: MediaTek: add ethernet support for MT7623 boards
Tom Rini
- [U-Boot] [U-Boot, 09/11] arm: MediaTek: add ethernet support for MT7629 boards
Tom Rini
- [U-Boot] [U-Boot, 10/11] MAINTAINERS: ARM MEDIATEK: update file entries
Tom Rini
- [U-Boot] [U-Boot, 11/11] configs: MediaTek: use OF_SEPARATE instead of OF_EMBED
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] include: configs: Add gunzip size for HiKey board
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] mmc: Convert HI6220 MMC driver to driver model
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] arm: dts: Add MMC nodes for HiKey board
Tom Rini
- [U-Boot] test: Use single quote consistently
Tom Rini
- [U-Boot] [U-Boot, 1/5] omap3: igep00x0: Remove unmaintained IGEP0032 defconfig
Tom Rini
- [U-Boot] [U-Boot, 2/5] omap3: igep00x0: Remove USB support due DM_USB deadline
Tom Rini
- [U-Boot] [U-Boot, 3/5] omap3: igep00x0: Switch to using TI_COMMON_CMD_OPTION
Tom Rini
- [U-Boot] [U-Boot, 4/5] omap3: igep00x0: Switch to simple malloc in SPL
Tom Rini
- [U-Boot] [U-Boot, 5/5] omap3: igep00x0: Add Device Tree Support and DM_MMC driver
Tom Rini
- [U-Boot] am335x: sl50: Add Device Tree Support and DM_MMC driver
Tom Rini
- [U-Boot] [U-Boot, 2/2, (RFT)] am335x: igep003x: Add Device Tree Support and DM_MMC driver
Tom Rini
- [U-Boot] mmc: Add support for downgrading HS200/HS400 to HS mode
Tom Rini
- [U-Boot] [U-Boot, 1/2] cmd: mmc: Force mmc reinit when no card present
Tom Rini
- [U-Boot] [U-Boot, 2/2] cmd: mmc: Invalidate MMC block cache after init
Tom Rini
- [U-Boot] configs: stm32: Remove CONFIG_OF_EMBED
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: gpio: use correct printf code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: nvedit: use correct format code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: sf: use correct printf code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: tpm-v2: use correct format code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: ubi: remove unreachable code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: unzip: use correct format code
Tom Rini
- [U-Boot] [U-Boot,1/1] cmd: zip: use correct format code
Tom Rini
- [U-Boot] dtoc: make generated platdata structs const
Tom Rini
- [U-Boot] spl: ymodem: Add support for loading gzip compressed uImage
Tom Rini
- [U-Boot] lib: uuid: Do not enable UUID command SPL
Tom Rini
- [U-Boot] pylibfdt: Use Python 2 in Makefile
Tom Rini
- [U-Boot] [U-Boot, v3] xyz-modem: Fix timeout loop waiting with WATCHDOG
Tom Rini
- [U-Boot] Fix typo: missmatched -> mismatched.
Tom Rini
- [U-Boot] drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UART
Tom Rini
- [U-Boot] serial: ns16550: fix debug uart putc called before init
Tom Rini
- [U-Boot] [U-Boot, v2] kbuild: fix parallel build race caused by u-boot.cfg regeneration
Tom Rini
- [U-Boot] [U-Boot,v2] adding saveenv-command for bananapi r2
Tom Rini
- [U-Boot] [PATCH] travis: Break up the NXP Layerscape jobs more
Tom Rini
- [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PATCH] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Tom Rini
- [U-Boot] [PATCH] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Tom Rini
- [U-Boot] [PATCH v2] ARC: Move ENV_SIZE and ENV_OFFSET to Kconfig
Tom Rini
- [U-Boot] serial: ns16550: fix debug uart putc called before init
Tom Rini
- [U-Boot] [U-Boot, 1/2] kbuild: add .DELETE_ON_ERROR special target
Tom Rini
- [U-Boot] [U-Boot, 2/2] kbuild: add .SECONDARY special target to scripts/Kbuild.include
Tom Rini
- [U-Boot] Makefile: run CONFIG_BOARD_SIZE_LIMIT against .img
Tom Rini
- [U-Boot] common: Kconfig: miscellaneous spelling fixes
Tom Rini
- [U-Boot] Pull request: u-boot-riscv/master
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] configs: Remove unused am335x_evm defconfigs
Tom Rini
- [U-Boot] [PATCH] configs: Remove am43xx_evm_ethboot_defconfig
Tom Rini
- [U-Boot] [PATCH v2 1/2] travis: Setup QEMU_VERSION as variable
Tom Rini
- [U-Boot] [PATCH v2 2/2] travis: Switch QEMU to 3.1.0 version
Tom Rini
- [U-Boot] [RFC 01/17] common: Break USB_STORAGE dependency between SPL and u-boot proper
Tom Rini
- [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Tom Rini
- [U-Boot] [PATCH v10 05/10] lib: lmb: extend lmb for checks at load time
Tom Rini
- [U-Boot] [PATCH] configs: Remove am335x_boneblack_defconfig
Tom Rini
- [U-Boot] [PATCH] spl: fat/fs: Add control to build FS EXT4 in SPL
Tom Rini
- [U-Boot] [PATCH] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Tom Rini
- [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Tom Rini
- [U-Boot] [PATCH 2/2] arm: mvebu: armada-xp/37x/38x: Enable PCIe DT node
Tom Rini
- [U-Boot] [PATCH] dts: am335x-pdu001: Fix polarity of card detection input
Tom Rini
- [U-Boot] [U-Boot, v1] mtd: nand: raw: allow to disable unneeded ECC layouts
Tom Rini
- [U-Boot] [U-Boot,v2] env: add spi_flash_read_env function
Tom Rini
- [U-Boot] [U-Boot,v10,01/10] test: add test for lib/lmb.c
Tom Rini
- [U-Boot] [U-Boot, v10, 02/10] lmb: fix allocation at end of address range
Tom Rini
- [U-Boot] [U-Boot, v10, 03/10] lib: lmb: reserving overlapping regions should fail
Tom Rini
- [U-Boot] [U-Boot, v10, 04/10] fdt: parse "reserved-memory" for memory reservation
Tom Rini
- [U-Boot] [U-Boot, v10, 05/10] lib: lmb: extend lmb for checks at load time
Tom Rini
- [U-Boot] [U-Boot, v10, 06/10] fs: prevent overwriting reserved memory
Tom Rini
- [U-Boot] [U-Boot, v10, 07/10] bootm: use new common function lmb_init_and_reserve
Tom Rini
- [U-Boot] [U-Boot, v10, 08/10] lmb: remove unused extern declaration
Tom Rini
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Tom Rini
- [U-Boot] [U-Boot, v10, 10/10] arm: bootm: fix sp detection at end of address range
Tom Rini
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Tom Rini
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Tom Rini
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Tom Rini
- [U-Boot] [PULL] u-boot-mips
Tom Rini
- [U-Boot] [PATCH 01/26] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Tom Rini
- [U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support
Tom Rini
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Tom Rini
- [U-Boot] TPL max size for RK3288 ?
Tom Rini
- [U-Boot] [U-Boot,1/2] dts: db410: fix indentation
Tom Rini
- [U-Boot] [U-Boot, 2/2] mach-snapdragon: db410: pinctrl: fix pin count
Tom Rini
- [U-Boot] [U-Boot,1/1] disk: efi: GUIDs should be const
Tom Rini
- [U-Boot] [U-Boot,01/10] Kconfig: fix spelling
Tom Rini
- [U-Boot] [U-Boot,02/10] common: spl: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,03/10] arm: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,04/10] x86: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,05/10] work_92105: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,06/10] drivers: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,07/10] i2c: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,08/10] pinctrl: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,09/10] video: Kconfig: spelling fixes
Tom Rini
- [U-Boot] [U-Boot,10/10] lib: Kconfig: spelling fixes
Tom Rini
- [U-Boot] mkimage: fixup CONFIG_FIT_EXTERNAL_OFFSET
Tom Rini
- [U-Boot] [U-Boot,v3] adding saveenv-command for bananapi r2
Tom Rini
- [U-Boot] configs: am335x_evm: Enable DM_SPI and DM_SPI_FLASH
Tom Rini
- [U-Boot] configs: Remove unused am335x_evm defconfigs
Tom Rini
- [U-Boot] configs: Remove am43xx_evm_ethboot_defconfig
Tom Rini
- [U-Boot] travis: Break up the NXP Layerscape jobs more
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] travis: Setup QEMU_VERSION as variable
Tom Rini
- [U-Boot] [U-Boot,v2,2/2] travis: Switch QEMU to 3.1.0 version
Tom Rini
- [U-Boot] cmd: mtd: fix compilation warning for help when SYS_LONGHELP=n
Tom Rini
- [U-Boot] arm: am335x-pdu001: Remove SPI support
Tom Rini
- [U-Boot] configs: Remove am335x_boneblack_defconfig
Tom Rini
- [U-Boot] arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2
Tom Rini
- [U-Boot] env: sf: fix environment in SPI NOR
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Tom Rini
- [U-Boot] [U-Boot,v3,1/5] Kconfig: Migrate BOUNCE_BUFFER
Tom Rini
- [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion
Tom Rini
- [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Tom Rini
- [U-Boot] env: sf: fix environment in SPI NOR
Tom Rini
- [U-Boot] [RFC PATCH] am335x: Changes in DDR init procedure to Support Samsung K4B2G1646EBIH9 memory chip
Tom Rini
- [U-Boot] [PATCH v1 1/3] arm: dts: add am335x-shc.dts for shc board
Tom Rini
- [U-Boot] [PATCH v1 2/3] ARM: dts: am335x-shc: add u-boot specific dtsi
Tom Rini
- [U-Boot] [PATCH v1 3/3] am335x, shc: adapt shc board to DM
Tom Rini
- [U-Boot] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Tom Rini
- [U-Boot] [PATCH] am335x: chilisom: Initial support for different DDR3 chips
Tom Rini
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH v2 11/21] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH v1 1/3] arm: dts: add am335x-shc.dts for shc board
Tom Rini
- [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Tom Rini
- [U-Boot] [PATCH v1 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL
Tom Rini
- [U-Boot] [PATCH v1 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode
Tom Rini
- [U-Boot] [PATCH v1 4/4] configs: removing am335x_evm_usbspl_defconfig
Tom Rini
- [U-Boot] [PATCH 1/6] firmware: ti_sci: Add support for NAVSS resource management
Tom Rini
- [U-Boot] [PATCH 2/6] soc: ti: k3: add navss ringacc driver
Tom Rini
- [U-Boot] [PATCH 3/6] soc: ti: k3: add CPPI5 description and helpers
Tom Rini
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Tom Rini
- [U-Boot] [PATCH 5/6] arm64: dts: ti: k3-am65: add mcu navss nodes
Tom Rini
- [U-Boot] [PATCH 6/6] configs: am65x_evm_a53: Enable DMA related configs
Tom Rini
- [U-Boot] [PATCH 1/3] PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPL
Tom Rini
- [U-Boot] [PATCH 2/3] rockchip: Add TPL_MAX_SIZE for RK3288
Tom Rini
- [U-Boot] [PATCH 3/3] linker: Modify linker scripts to be more generic
Tom Rini
- [U-Boot] [PATCH v3 3/7] dfu: Remove dependency on HUSH parser in SPL
Tom Rini
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Tom Rini
- [U-Boot] [PATCH v2 1/4] spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Tom Rini
- [U-Boot] Pull request: u-boot-nds32/master
Tom Rini
- [U-Boot] [PATCH v2 2/4] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Tom Rini
- [U-Boot] [PATCH v2 3/4] spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Tom Rini
- [U-Boot] [PATCH v2 4/4] spl: fat/fs: Add control to build FS EXT4 in SPL
Tom Rini
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Tom Rini
- [U-Boot] [PATCH 1/6] firmware: ti_sci: Add support for NAVSS resource management
Tom Rini
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Tom Rini
- [U-Boot] [PULL] u-boot-mips
Tom Rini
- [U-Boot] [PATCH 3/3] linker: Modify linker scripts to be more generic
Tom Rini
- [U-Boot] [PATCH 1/2] Add domain mapping for Pepperl+Fuchs
Tom Rini
- [U-Boot] [GIT PULL] Xilinx patches for v2019.04
Tom Rini
- [U-Boot] configs: Enable CONFIG_BLK in a few TI boards
Tom Rini
- [U-Boot] [PATCH] configs: Move CONFIG_SPI_FLASH into defconfigs
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH v2 1/7] firmware: ti_sci: Add support for NAVSS resource management
Tom Rini
- [U-Boot] [PATCH v2 5/7] soc: keystone: Merge into ti specific directory
Tom Rini
- [U-Boot] [U-Boot,v1] dm: led: add TI LP5562 LED driver
Tom Rini
- [U-Boot] [U-Boot, RESEND, v3, 1/1] avb: add support for named persistent values
Tom Rini
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Tom Rini
- [U-Boot] [PATCH 1/1] test/py: use default load address for tftp
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [U-Boot, v3, 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Tom Rini
- [U-Boot] Makefile: Only build dtc if needed
Tom Rini
- [U-Boot] [U-Boot, PATCHv1] arm: stm32mp1: deploy spl in root folder
Tom Rini
- [U-Boot] cmd: ximg: Invert check for fit image compression
Tom Rini
- [U-Boot] [U-Boot, v1, 1/5] arm: mach-snapdragon: db820c: Actually init PLL for serial
Tom Rini
- [U-Boot] [U-Boot, v1, 2/5] arm: mach-snapdragon: add pinctrl driver for db820c
Tom Rini
- [U-Boot] [U-Boot, v1, 3/5] configs: dragonboard820c: Enable pinctrl/mux config
Tom Rini
- [U-Boot] [U-Boot, v1, 4/5] arm: mach-snapdragon: pinctrl: clarify gpio disable bit
Tom Rini
- [U-Boot] [U-Boot, v1, 5/5] dts: 820c: Add pinctrl node and uart mux
Tom Rini
- [U-Boot] [U-Boot, 1/3] poplar: sync up device tree with kernel 4.20
Tom Rini
- [U-Boot] [U-Boot, 2/3] mmc: hi6220_dw_mmc: add compatible for Poplar support
Tom Rini
- [U-Boot] [U-Boot, 3/3] poplar: clean up board level mmc initialization code
Tom Rini
- [U-Boot] [U-Boot,v1,1/1] arm64: dt: poplar: add optee node
Tom Rini
- [U-Boot] [U-Boot, 1/2] mmc: mtk-sd: fix possible incomplete read ops
Tom Rini
- [U-Boot] [U-Boot, 2/2] mmc: mtk-sd: fix SPL compilation when GPIO=y and SPL_GPIO=n
Tom Rini
- [U-Boot] [U-Boot, v3, 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Tom Rini
- [U-Boot] [U-Boot, v3, 2/7] dfu: Make DFU support more SPL friendly
Tom Rini
- [U-Boot] [U-Boot, v3, 3/7] dfu: Remove dependency on HUSH parser in SPL
Tom Rini
- [U-Boot] [U-Boot, v3, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Tom Rini
- [U-Boot] Makefile: have "make distclean" remove CHANGELOG
Tom Rini
- [U-Boot] ARM: chiliboard: enable DM_SPI
Tom Rini
- [U-Boot] [U-Boot, 1/2] env: common: Return specific error code on bad CRC
Tom Rini
- [U-Boot] [U-Boot, 2/2] env: Fix saving environment to "bad CRC" location
Tom Rini
- [U-Boot] [U-Boot, RESEND] drivers: esdhc: add support for ColdFire mcf5441x family
Tom Rini
- [U-Boot] atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot
Tom Rini
- [U-Boot] tests: dtoc: adapt tests to changed dtoc output
Tom Rini
- [U-Boot] misc: i2c_eeprom: Add atmel,24c08 to the list
Tom Rini
- [U-Boot] MAINTAINERS: update stm32mp1 path for arch
Tom Rini
- [U-Boot] bcm968380gerg: disable SPI_FLASH
Tom Rini
- [U-Boot] [U-Boot, 1/2] lib: lmb: rename lmb_get_unreserved_size to lmb_get_free_size
Tom Rini
- [U-Boot] [U-Boot, 2/2] lib: lmb: cleanup var names and patman warnings
Tom Rini
- [U-Boot] [U-Boot,1/1] hashtable: remove caps buffer
Tom Rini
- [U-Boot] misc: i2c_eeprom: Add atmel,24c08 to the list
Tom Rini
- [U-Boot] [U-Boot, PATCHv1] arm: stm32mp1: deploy spl in root folder
Tom Rini
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Tom Rini
- [U-Boot] [U-Boot, 1/3] PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPL
Tom Rini
- [U-Boot] [U-Boot,2/3] rockchip: Add TPL_MAX_SIZE for RK3288
Tom Rini
- [U-Boot] [U-Boot, 3/3] linker: Modify linker scripts to be more generic
Tom Rini
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Tom Rini
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PULL] efi patch queue 2019-01-28
Tom Rini
- [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Tom Rini
- [U-Boot] [PATCH v1 0/3] Add support for symlink creation in EXT4
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190129
Tom Rini
- [U-Boot] [PATCH 01/13] arm64: dts: k3: Sync sdhci0 node from kernel
Tom Rini
- [U-Boot] [PATCH 02/13] mmc: am654_mmc: Change driver name
Tom Rini
- [U-Boot] [PATCH 03/13] mmc: am654_sdhci: Remove quirks
Tom Rini
- [U-Boot] [PATCH 04/13] regmap: Add API regmap_init_mem_index()
Tom Rini
- [U-Boot] [PATCH 05/13] regmap: Add support for polling on a register
Tom Rini
- [U-Boot] [PATCH 06/13] mmc: sdhci: Add support for sdhci-caps-mask
Tom Rini
- [U-Boot] [PATCH 07/13] mmc: sdhci: Make sdhci_set_clock() non static
Tom Rini
- [U-Boot] [PATCH 08/13] arm: dts: k3: Add phy specific properties to SD card node
Tom Rini
- [U-Boot] [PATCH 09/13] mmc: sdhci: Make set_ios_post() return int
Tom Rini
- [U-Boot] [PATCH 10/13] mmc: am654_sdhci: Add Support for PHY
Tom Rini
- [U-Boot] [PATCH 11/13] configs: am65x_evm: Enable CONFIG_REGMAP
Tom Rini
- [U-Boot] [PATCH 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Tom Rini
- [U-Boot] [PATCH 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Tom Rini
- [U-Boot] arm: stm32mp1: deploy spl in root folder
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190129
Tom Rini
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] dfu: mmc: call fs functions instead of run_command
Tom Rini
- [U-Boot] Makefile: remove generated font files
Tom Rini
- [U-Boot] [U-Boot,u-boot] MAINTAINERS: Add Amlogic entry
Tom Rini
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Tom Rini
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Tom Rini
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190131
Tom Rini
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Maxime Ripard
- [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Maxime Ripard
- [U-Boot] [PATCH] sunxi: add spi flash bootcmd
Maxime Ripard
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Maxime Ripard
- [U-Boot] [PATCH 1/1] sunxi: board: Add i2c initialization for sun50i
Maxime Ripard
- [U-Boot] [PATCH] board: mvebu: drop unused ETH_PHY macro definitions
Stefan Roese
- [U-Boot] [PATCH 2/3] arm: socfpga: clean up socfpga_common.h
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Stefan Roese
- [U-Boot] [PATCH] arm64: mvebu: Add basic support for uDPU board
Stefan Roese
- [U-Boot] [PATCH 1/2] mips: mt7688: gardena-smart-gateway: Update mtdparts/mtdids for Kernel 4.19
Stefan Roese
- [U-Boot] [PATCH 2/2] mips: mt7688: gardena-smart-gateway: Enable green power LED on startup
Stefan Roese
- [U-Boot] [PATCH 3/4] MIPS: mscc: ocelot: add switch reset support
Stefan Roese
- [U-Boot] [PATCH 1/2] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: mvebu: armada-xp/37x/38x: Enable PCIe DT node
Stefan Roese
- [U-Boot] [PATCH 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: mvebu: armada-xp/37x/38x: Enable PCIe DT node
Stefan Roese
- [U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Stefan Roese
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Stefan Roese
- [U-Boot] [PATCH] pci: Add PCI_SLOT macro to include/pci.h
Stefan Roese
- [U-Boot] [PATCH 1/3 v2] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH 2/3 v2] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
Stefan Roese
- [U-Boot] [PATCH 3/3 v2] arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes
Stefan Roese
- [U-Boot] [PATCH v2] arm64: mvebu: Add basic support for uDPU board
Stefan Roese
- [U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Stefan Roese
- [U-Boot] [PATCH v4 00/10] Changes for Turris Mox
Stefan Roese
- [U-Boot] [PATCH v3 1/1] arm64: dts: marvell: armada-ap806: reserve PSCI area
Stefan Roese
- [U-Boot] [PATCH v2 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Stefan Roese
- [U-Boot] [PATCH] board: mvebu: drop unused ETH_PHY macro definitions
Stefan Roese
- [U-Boot] [PATCH v2] ARM: mvebu: add support for Allied Telesis x530
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Stefan Roese
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Stefan Roese
- [U-Boot] [PATCH] pci: Add PCI_SLOT macro to include/pci.h
Stefan Roese
- [U-Boot] [PATCH] pci: Add PCI_SLOT macro to include/pci.h
Stefan Roese
- [U-Boot] [PATCH 1/3 v2] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH] mtd: spinand: Sync GigaDevice GD5F1GQ4UExxG with latest Linux version
Stefan Roese
- [U-Boot] [PATCH 1/4 v3] pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr
Stefan Roese
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH 3/4 v3] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
Stefan Roese
- [U-Boot] [PATCH 4/4 v3] arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes
Stefan Roese
- [U-Boot] [PATCH v3] arm64: mvebu: Add basic support for uDPU board
Stefan Roese
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH] video: bmp: Add support for 24bpp BMP files on 16bpp displays
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: theadorable: Enable DM_VIDEO support
Stefan Roese
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH v4] arm64: mvebu: Add basic support for uDPU board
Stefan Roese
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH v2] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH v2] video: bmp: Add support for 24bpp BMP files on 16bpp displays
Stefan Roese
- [U-Boot] [PATCH v2] arm: mvebu: theadorable: Enable video / LCD support with the new DM driver
Stefan Roese
- [U-Boot] [PATCH] mips: mt76xx: Use correct timer frequency
Stefan Roese
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Stefan Roese
- [U-Boot] [PATCH] net: bcm6368: fix restart flow issues
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Álvaro Fernández Rojas
- [U-Boot] [RFC PATCH 0/8] Actions S700 SoC support
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 7/8] serial: actions: add uart support for s700
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 2/8] arm: actions: Add owl memory map regions
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 3/8] clk: actions: Add common clock driver
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 5/8] arm: actions: add S700 SoC device tree
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 2/8] arm: actions: Add owl memory map regions
Manivannan Sadhasivam
- [U-Boot] [RFC PATCH 7/8] serial: actions: add uart support for s700
Manivannan Sadhasivam
- [U-Boot] [PATCH 2/3] mmc: hi6220_dw_mmc: add compatible for Poplar support
Manivannan Sadhasivam
- [U-Boot] [PATCH 3/3] poplar: clean up board level mmc initialization code
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/3] poplar: sync up device tree with kernel 4.20
Manivannan Sadhasivam
- [U-Boot] [PATCH v3 3/9] clk: actions: Add common clock driver
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 1/9] arm: actions: Add common framework for Actions Semi SoCs
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 2/9] arm: actions: Add owl memory map regions
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 6/9] arm: add Cubieboard7 board support
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 6/9] arm: add Cubieboard7 board support
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 4/9] arm: add support Actions Semi S700
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 7/9] actions:s700: add u-boot specific dts file
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/3] poplar: sync up device tree with kernel 4.20
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 1/9] arm: actions: Add common framework for Actions Semi SoCs
Manivannan Sadhasivam
- [U-Boot] booting optee via SPL on imx6q
Shyam Saini
- [U-Boot] booting optee via SPL on imx6q
Shyam Saini
- [U-Boot] booting optee via SPL on imx6q
Shyam Saini
- [U-Boot] Nand boot on imx6q board is broken
Shyam Saini
- [U-Boot] Nand boot on imx6q board is broken
Shyam Saini
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Otavio Salvador
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Otavio Salvador
- [U-Boot] Porting u-boot to flash micro with proprietary (non-GPL) flash programming library
Ulf Samuelsson
- [U-Boot] Porting u-boot to flash micro with proprietary (non-GPL) flash programming library
Ulf Samuelsson
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Hannes Schmelzer
- [U-Boot] [PATCH] board/BuR/brppt1: drop DM_I2C_COMPAT
Hannes Schmelzer
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Hannes Schmelzer
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Hannes Schmelzer
- [U-Boot] [PATCH V2] i2c: xiic: Add Xilinx AXI I2C driver
Heiko Schocher
- [U-Boot] [PATCH V2] i2c: xiic: Add Xilinx AXI I2C driver
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] u-boot-fw-utils issue
Heiko Schocher
- [U-Boot] commit 9a9d66f5ef break U-Boot Env
Heiko Schocher
- [U-Boot] commit 9a9d66f5ef break U-Boot Env
Heiko Schocher
- [U-Boot] [PATCH] env: sf: fix environment in SPI NOR
Heiko Schocher
- [U-Boot] [PATCH v1 0/3] am335x, shc: convert am335x based shc board to DM usage
Heiko Schocher
- [U-Boot] [PATCH v1 1/3] arm: dts: add am335x-shc.dts for shc board
Heiko Schocher
- [U-Boot] [PATCH v1 2/3] ARM: dts: am335x-shc: add u-boot specific dtsi
Heiko Schocher
- [U-Boot] [PATCH v1 3/3] am335x, shc: adapt shc board to DM
Heiko Schocher
- [U-Boot] env: sf: fix environment in SPI NOR
Heiko Schocher
- [U-Boot] [PATCH 05/33] i2c: designware: Add error checking on init
Heiko Schocher
- [U-Boot] [PATCH v1 1/3] arm: dts: add am335x-shc.dts for shc board
Heiko Schocher
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] tools: imx8image: use correct printf escape sequence
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] sandbox: i2c_emul_find() No emulators for device 'rtc at 43'
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix memory allocation on sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: SNP unit test on sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: gpio: use correct printf code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: nvedit: use correct format code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: sf: use correct printf code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: tpm-v2: use correct format code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: ubi: remove unreachable code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: unzip: use correct format code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: zip: use correct format code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: events unit test, check return values
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: tpl unit test, check return values
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_driver: simplify error message
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/1] efi_loader: refactor switch to non-secure mode
Heinrich Schuchardt
- [U-Boot] [PATCH 1/5] efi_loader: LoadImage: always allocate new pages
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix CopyMem()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Heinrich Schuchardt
- [U-Boot] [RFC] Device model for block devices - integration with EFI subsystem
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use u16* for file name
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] disk: efi: GUIDs should be const
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use u16* for file name
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: consistent build flags for EFI applications
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] powerpc: enabled building with CONFIG_DM=y
Heinrich Schuchardt
- [U-Boot] [PATCH v2] efi_loader: move efi_init_obj_list() to a new efi_setup.c
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/9] cmd: add efitool command
Heinrich Schuchardt
- [U-Boot] [PATCH v4 4/9] cmd: efitool: add drivers command
Heinrich Schuchardt
- [U-Boot] [PATCH v4 3/9] efi_driver: add name to driver binding protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v4 9/9] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v4 7/9] cmd: efitool: add memmap command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove duplicate GUID definition
Heinrich Schuchardt
- [U-Boot] [PATCH v4 5/9] cmd: efitool: add dh command
Heinrich Schuchardt
- [U-Boot] [PATCH v4 6/9] cmd: efitool: add images command
Heinrich Schuchardt
- [U-Boot] [PATCH v4 2/9] cmd: efitool: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH v4 8/9] cmd: efitool: export uefi variable helper functions
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_selftest: fix variables test for GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH v4 3/9] efi_driver: add name to driver binding protocol
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: eliminate duplicate function hex2mem()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove duplicate function mem2hex()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: comments for variable services
Heinrich Schuchardt
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Heinrich Schuchardt
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Heinrich Schuchardt
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Heinrich Schuchardt
- [U-Boot] [BUG ] efiloader: incorrect creation of *.efi file
Heinrich Schuchardt
- [U-Boot] [PATCH 0/3] efi_loader: provide library for freestanding binaries
Heinrich Schuchardt
- [U-Boot] [PATCH 1/3] efi_loader: provide freestanding library
Heinrich Schuchardt
- [U-Boot] [PATCH 2/3] efi_loader: use freestanding library for efi apps
Heinrich Schuchardt
- [U-Boot] [PATCH 3/3] efi_loader: use library memcpy() in helloworld.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] powerpc: enabled building with CONFIG_DM=y
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] arm64: dts: marvell: armada-ap806: reserve PSCI area
Heinrich Schuchardt
- [U-Boot] [RFC] arch/arm/lib/reloc_aarch64_efi.c
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: implement GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 0/2] efi_loader: add GetNextVariableName
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/2] efi_loader: implement GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 2/2] efi_selftest: fix variables test for GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do not use symbolic links
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix GetNextVariableName
Heinrich Schuchardt
- [U-Boot] [PATCH v3 2/2] efi_selftest: fix variables test for GetNextVariableName()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: GetNextVariableName() relies on REGEX
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Heinrich Schuchardt
- [U-Boot] [PATCH v3 0/5] subject: efi_loader: add HII database protocol
Heinrich Schuchardt
- [U-Boot] [BUG] efi_loader: GetNextVariableName() fails on qemu-x86_64
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: do not use i386 code for x86_64 memory functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] hashtable: remove caps buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: fix HII tests
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: debug output for HII protocols
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: provide unit test for memory functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: provide unit test for memory functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Patch non-runtime code out at ExitBootServices already
Heinrich Schuchardt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Patch non-runtime code out at ExitBootServices already
Heinrich Schuchardt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Heinrich Schuchardt
- [U-Boot] [U-Boot, v10, 09/10] tftp: prevent overwriting reserved memory
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: use default load address for tftp
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: use default load address for tftp
Heinrich Schuchardt
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: use default load address for tftp
Heinrich Schuchardt
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/2] efi_loader: Patch RTS at ExitBootServices
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Heinrich Schuchardt
- [U-Boot] [PATCH] Makefile: remove generated font files
Heinrich Schuchardt
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Heinrich Schuchardt
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
Heinrich Schuchardt
- [U-Boot] [RFC 0/3] dm, efi: integrate efi_disk into DM
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: #define CONFIG_LOADADDR 0x1100000
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] x86: Add efi runtime reset
Heinrich Schuchardt
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: provide unit test for memory functions
Heinrich Schuchardt
- [U-Boot] [PATCH v3 2/2] efi_loader: Patch non-runtime code out at ExitBootServices already
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] configs: qemu: enable CONFIG_UT
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] configs: qemu: enable CONFIG_UT
Heinrich Schuchardt
- [U-Boot] [PATCH] lmb: handle more than one DRAM BANK
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/2] x86: Add efi runtime reset
Heinrich Schuchardt
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Heinrich Schuchardt
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Quentin Schulz
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Quentin Schulz
- [U-Boot] [PATCH] cmd: mtd: fix compilation warning for help when SYS_LONGHELP=n
Quentin Schulz
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v3 0/6] mips: mscc: gpio: Add MSCC serial GPIO driver
Daniel Schwierzeck
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Daniel Schwierzeck
- [U-Boot] [PATCH] net: bcm6368: fix restart flow issues
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mips: spi: mscc: Add fast bitbang SPI driver
Daniel Schwierzeck
- [U-Boot] [PATCH 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH 2/7] MSCC: Add support for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH 6/7] MSCC: add configuration for Jaguar2 SOC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 7/7] MSCC: Add board support for Jaguar2 SOC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 0/2] MIPS: cleanup/optimise linker scripts
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] MIPS: optimize and fix ELF sections
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] MIPS: jz47xx: remove custom u-boot-spl.lds
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] MIPS: jz47xx: remove custom u-boot-spl.lds
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mips: spi: mscc: Add fast bitbang SPI driver
Daniel Schwierzeck
- [U-Boot] [PATCH v2] spi: soft_spi: Fix null ptr when probing soft_spi.
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/3] mips: spi: mscc: Add fast bitbang SPI driver
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/7] MSCC: Add support for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 6/7] MSCC: Add board support for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mmc: Use proper IS_ENABLED macro to check block support
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] mmc: jz_mmc: Compile-out write support if disabled
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v3 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v3 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v4 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v6 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v6 2/6] MSCC: Add support for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH v6 6/6] MSCC: Add board support for Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH] net: bcm6368: fix restart flow issues
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mmc: Use proper IS_ENABLED macro to check block support
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] mmc: jz_mmc: Compile-out write support if disabled
Daniel Schwierzeck
- [U-Boot] [PATCH v3 0/3] mips: spi: mscc: Add fast bitbang SPI driver
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] MIPS: fix Kconfig warnings about CONFIG_OF_EMBED
Daniel Schwierzeck
- [U-Boot] [PATCH 1/5] MIPS: boston: switch to CONFIG_OF_SEPARATE
Daniel Schwierzeck
- [U-Boot] [PATCH 2/5] MIPS: malta: switch to CONFIG_OF_SEPARATE
Daniel Schwierzeck
- [U-Boot] [PATCH 3/5] MIPS: pic32mzdask: switch to CONFIG_OF_SEPARATE
Daniel Schwierzeck
- [U-Boot] [PATCH 4/5] MIPS: xilfpga: switch to CONFIG_OF_SEPARATE
Daniel Schwierzeck
- [U-Boot] [PATCH 5/5] MIPS: bmips: switch to CONFIG_OF_SEPARATE
Daniel Schwierzeck
- [U-Boot] [PATCH v7 0/6] MSCC: Add Jaguar2 SOC family
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mips: mt7688: gardena-smart-gateway: Update mtdparts/mtdids for Kernel 4.19
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] mips: mt7688: gardena-smart-gateway: Enable green power LED on startup
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] mtd: spi: export functions to sf_internal.h
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 2/3] MSCC: Add support for Servalt SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] MSCC: Add board support for Servalt SoC family
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] MSCC: Add sysreset drivers for MSCC Socs
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] MSCC: Remove reset.c
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips
Daniel Schwierzeck
- [U-Boot] [PATCH v3 2/4] net: add MSCC Ocelot switch support
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] MSCC: Add Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH V2 1/6] watchdog: bcm6345: switch to raw I/O functions
Daniel Schwierzeck
- [U-Boot] [PATCH V2 2/6] watchdog: bcm6345: allow to use this driver on arm
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] MSCC: Add Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 1/5] pinctrl: mscc: Add gpio and pinctrl for Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 2/5] MSCC: Add support for Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 5/5] MSCC: Add board support for Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] linker: Modify linker scripts to be more generic
Daniel Schwierzeck
- [U-Boot] [PATCH v3 0/4] Add network support for Ocelots SoCs
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/3] MSCC: Add Servalt SoC family
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] MSCC: Add Serval SoC family.
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips
Daniel Schwierzeck
- [U-Boot] [PATCH v2 7/8] net: Add MSCC Luton networkd driver.
Daniel Schwierzeck
- [U-Boot] [PATCH 0/2] iMX6 SPL NAND flash detection fixes
Andrea Scian
- [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation
Andrea Scian
- [U-Boot] [PATCH 2/2] mtd: mxs_nand_spl: use legacy probe only if ONFI fails
Andrea Scian
- [U-Boot] [PATCH] drivers: serial: dm: Enable DM_FLAG_PRE_RELOC in SBSA pl011 uart driver
Vabhav Sharma
- [U-Boot] [PATCH] drivers: serial: lpuart: Enable Little Endian Support
Vabhav Sharma
- [U-Boot] [PATCH v3] x86: tsc: Add support for native calibration of TSC freq
Andy Shevchenko
- [U-Boot] Bogus message about SCSI during build
Andy Shevchenko
- [U-Boot] Bogus message about SCSI during build
Andy Shevchenko
- [U-Boot] [PATCH] Makefile: Correct logic for DM_SCSI + unconverted drivers check
Andy Shevchenko
- [U-Boot] Bogus message about SCSI during build
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] doc: Fix CONFIG_OF_SEPARATE description
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: edison: Switch to CONFIG_OF_SEPARATE
Andy Shevchenko
- [U-Boot] [PATCH v1 3/4] serial: add an of-platdata driver for "snps, dw-apb-uart"
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] doc: Fix CONFIG_OF_SEPARATE description
Andy Shevchenko
- [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism
Baruch Siach
- [U-Boot] [PATCH 2/2] imx8mq_evk/README: remove ARCH environment variable
Baruch Siach
- [U-Boot] [PATCH] board: mvebu: drop unused ETH_PHY macro definitions
Baruch Siach
- [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable
Baruch Siach
- [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable
Baruch Siach
- [U-Boot] [PATCH] exynos: allow SPL to build in thumb mode
Siarhei Siamashka
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Fix mmc node names to be in sync with kernel
Michal Simek
- [U-Boot] [PATCH] i2c: i2c-cdns: Use proper input frequency
Michal Simek
- [U-Boot] [PATCH V2] i2c: xiic: Add Xilinx AXI I2C driver
Michal Simek
- [U-Boot] [PATCH V2] i2c: xiic: Add Xilinx AXI I2C driver
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Fix tcminit help text alignment
Michal Simek
- [U-Boot] [PATCH] i2c: mux: Covert to livetree functions
Michal Simek
- [U-Boot] [PATCH] i2c: Reflect correct dependency for !DM cadence driver
Michal Simek
- [U-Boot] [PATCH] fpga: zynqmp: show an error message when FPGA programming fails
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH] arm64: versal: Setup DM_ETH/MMC if NET/MMC is enabled
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Setup DM_ETH/MMC if NET/MMC is enabled
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Enable net configs for zc1275
Michal Simek
- [U-Boot] [PATCH] ARM: zynqmp_r5: Setup DM_ETH/MMC if NET/MMC is enabled
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH 1/5] arm64: zynqmp: Setup proper SPI dependency
Michal Simek
- [U-Boot] [PATCH 2/5] arm64: zynqmp: Enable SPI on several boards
Michal Simek
- [U-Boot] [PATCH 3/5] arm64: zynqmp: Enable ISSI flash for some platforms
Michal Simek
- [U-Boot] [PATCH 4/5] arm64: zynqmp: Enable FPGA_LOAD_SECURE command
Michal Simek
- [U-Boot] [PATCH 5/5] arm64: zynqmp: Disable MMC for for zc12xx_revA boards
Michal Simek
- [U-Boot] [PATCH 1/3] tools: zynqimage: Align image_size/image_stored_size
Michal Simek
- [U-Boot] [PATCH 2/3] arm64: zynqmp: Convert all reference boards to OF_SEPARATE
Michal Simek
- [U-Boot] [PATCH 3/3] ARM: zynq: Convert all boards to OF_SEPARATE
Michal Simek
- [U-Boot] [PATCH 1/3] tools: zynqimage: Align image_size/image_stored_size
Michal Simek
- [U-Boot] [PATCH v2 1/4] tools: zynqmpimage: Align image_size/image_stored_size
Michal Simek
- [U-Boot] [PATCH v2 2/4] arm64: zynqmp: Align u-boot-spl.bin for boot.bin creation
Michal Simek
- [U-Boot] [PATCH v2 3/4] arm64: zynqmp: Convert all reference boards to OF_SEPARATE
Michal Simek
- [U-Boot] [PATCH v2 4/4] ARM: zynq: Convert all boards to OF_SEPARATE
Michal Simek
- [U-Boot] [PATCH v2 1/2] travis: Setup QEMU_VERSION as variable
Michal Simek
- [U-Boot] [PATCH v2 2/2] travis: Switch QEMU to 3.1.0 version
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH v2 2/4] arm64: zynqmp: Align u-boot-spl.bin for boot.bin creation
Michal Simek
- [U-Boot] [PATCH v2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Move SoC sources to mach-zynqmp
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: versal: Enable i2c cadence controller and i2c command
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: versal: Enable dm command
Michal Simek
- [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already
Michal Simek
- [U-Boot] [PATCH] i2c: cdns: Covert to livetree function
Michal Simek
- [U-Boot] [PATCH 0/4] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()
Michal Simek
- [U-Boot] [PATCH 2/4] fdt: Introduce fdtdec_get_alias_highest_id()
Michal Simek
- [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices
Michal Simek
- [U-Boot] [PATCH 4/4] i2c: mux: Add support for not listed sub-buses
Michal Simek
- [U-Boot] [PATCH 0/2] Board support updates for topic-miamiplus modules
Michal Simek
- [U-Boot] [PATCH 0/4] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH] misc: i2c_eeprom: Add atmel,24c08 to the list
Michal Simek
- [U-Boot] [PATCH 2/4] board: topic_miamilite: Support cost-reduced version
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Enable CONFIG_REMAKE_ELF
Michal Simek
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: zynqmp: Remove unused GEM addresses
Michal Simek
- [U-Boot] [PATCH 2/2] ARM: zynq: Remove unused GEM addresses
Michal Simek
- [U-Boot] [PATCH 1/3] ARM: zynq: Disable i2c for Zybo/Zybo Z7
Michal Simek
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Michal Simek
- [U-Boot] [PATCH 3/3] ARM: zynq: Convert dlc20 and zc70x board to DM_I2C
Michal Simek
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Add ethernet node for zc1275 revB
Michal Simek
- [U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Michal Simek
- [U-Boot] [PATCH 4/4] i2c: mux: Add support for not listed sub-buses
Michal Simek
- [U-Boot] [GIT PULL] Xilinx patches for v2019.04
Michal Simek
- [U-Boot] [PATCH 1/2] ARM: zynq: Run distribution boot commands first
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Michal Simek
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Michal Simek
- [U-Boot] [PATCH 1/2] ARM: zynq: Run distribution boot commands first
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Define distro boot commnads for qspi and nand
Michal Simek
- [U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Convert Antminer to OF_SEPARATE
Michal Simek
- [U-Boot] [PATCH] arm64: versal: Add new Kconfig SYS_MEM_RSVD_FOR_MMU
Michal Simek
- [U-Boot] [PATCH] arm64: versal: Add mini eMMC configuration
Michal Simek
- [U-Boot] [PATCH] spi: zynqmp_gqspi: Enable versal compatible string
Michal Simek
- [U-Boot] [PATCH 1/2] arm: zynq: Define distro boot commnads for qspi, nand and nor
Michal Simek
- [U-Boot] [PATCH 2/2] arm: zynq: Update boot_targets based on bootmode
Michal Simek
- [U-Boot] [PATCH 1/2] xilinx: Move zynq_board_read_rom_ethaddr to shared location
Michal Simek
- [U-Boot] [PATCH 2/2] xilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr()
Michal Simek
- [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()
Michal Simek
- [U-Boot] [PATCH] arm64: versal: Remove one level of indentation in board_early_init_r()
Michal Simek
- [U-Boot] misc: i2c_eeprom: Add atmel,24c08 to the list
Michal Simek
- [U-Boot] [PATCH v2] net: phy: Add gmiitorgmii converter support
Michal Simek
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Michal Simek
- [U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C
Michal Simek
- [U-Boot] [PATCH 2/4] fdt: Introduce fdtdec_get_alias_highest_id()
Michal Simek
- [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()
Michal Simek
- [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already
Michal Simek
- [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices
Michal Simek
- [U-Boot] [PATCH 4/4] i2c: mux: Add support for not listed sub-buses
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()
Michal Simek
- [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()
Michal Simek
- [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()
Michal Simek
- [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()
Michal Simek
- [U-Boot] [PATCH v2 5/7] i2c: dm: Record maximum id of devices before probing devices
Michal Simek
- [U-Boot] [PATCH v2 6/7] i2c: Fill req_seq in i2c_post_bind()
Michal Simek
- [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name
Michal Simek
- [U-Boot] [PATCH v3 01/60] mpc83xx: Introduce ARCH_MPC830*
Mario Six
- [U-Boot] [PATCH v3 02/60] mpc83xx: Introduce ARCH_MPC831*
Mario Six
- [U-Boot] [PATCH v3 03/60] mpc83xx: Introduce ARCH_MPC832*
Mario Six
- [U-Boot] [PATCH v3 04/60] mpc83xx: Introduce ARCH_MPC834*
Mario Six
- [U-Boot] [PATCH v3 05/60] mpc83xx: Introduce ARCH_MPC836*
Mario Six
- [U-Boot] [PATCH v3 06/60] mpc83xx: Introduce ARCH_MPC837X
Mario Six
- [U-Boot] [PATCH v3 07/60] keymile: Make distinct kmtegr1, kmvect1, suvd3 configs
Mario Six
- [U-Boot] [PATCH v3 08/60] keymile: Move config files
Mario Six
- [U-Boot] [PATCH v3 09/60] keymile: Unroll includes
Mario Six
- [U-Boot] [PATCH v3 10/60] keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs
Mario Six
- [U-Boot] [PATCH v3 11/60] keymile: Unroll km/km83xx-common.h
Mario Six
- [U-Boot] [PATCH v3 12/60] keymile: Make distinct kmeter1, and kmcoge5ne configs
Mario Six
- [U-Boot] [PATCH v3 13/60] mpc83xx: Make distinct MPC8313ERDB targets
Mario Six
- [U-Boot] [PATCH v3 14/60] vme8349: Migrate to CONFIG_TARGET_VME8349
Mario Six
- [U-Boot] [PATCH v3 15/60] mpc83xx: Make distinct caddy2 config
Mario Six
- [U-Boot] [PATCH v3 16/60] powerpc: Add LSDMR config values
Mario Six
- [U-Boot] [PATCH v3 17/60] mpc83xx: Make distinct MPC8349EMDS_SDRAM board
Mario Six
- [U-Boot] [PATCH v3 18/60] mpc8315erdb: Merge BR/OR settings
Mario Six
- [U-Boot] [PATCH v3 19/60] ve8313: Merge BR/OR settings
Mario Six
- [U-Boot] [PATCH v3 20/60] MPC832XEMDS: Migrate to CONFIG_TARGET_MPC832XEMDS
Mario Six
- [U-Boot] [PATCH v3 21/60] MPC8349ITX: Migrate to CONFIG_TARGET_MPC8349ITX
Mario Six
- [U-Boot] [PATCH v3 22/60] hrcon: Migrate to CONFIG_TARGET_HRCON
Mario Six
- [U-Boot] [PATCH v3 23/60] strider: Migrate to CONFIG_TARGET_STRIDER
Mario Six
- [U-Boot] [PATCH v3 24/60] MPC8313ERDB: Remove CONFIG_MPC8313ERDB
Mario Six
- [U-Boot] [PATCH v3 25/60] MPC8315ERDB: Remove CONFIG_MPC8315ERDB
Mario Six
- [U-Boot] [PATCH v3 26/60] MPC837XEMDS: Remove CONFIG_MPC837XEMDS
Mario Six
- [U-Boot] [PATCH v3 27/60] MPC837XERDB: Remove CONFIG_MPC837XERDB
Mario Six
- [U-Boot] [PATCH v3 28/60] mpc83xx: Migrate legacy PCI options to Kconfig
Mario Six
- [U-Boot] [PATCH v3 29/60] mpc83xx: Replace CONFIG_83XX_CLKIN in calculations
Mario Six
- [U-Boot] [PATCH v3 30/60] mpc83xx: Get rid of CONFIG_83XX_CLKIN
Mario Six
- [U-Boot] [PATCH v3 31/60] mpc83xx: Kconfig: Migrate HRCW to Kconfig
Mario Six
- [U-Boot] [PATCH v3 32/60] mpc83xx: pcie: Read the clock from registers
Mario Six
- [U-Boot] [PATCH v3 33/60] powerpc: Migrate HIGH_BATS to Kconfig
Mario Six
- [U-Boot] [PATCH v3 34/60] mpc83xx: Migrate BATS config to Kconfig
Mario Six
- [U-Boot] [PATCH v3 35/60] mpc83xx: Migrate LBLAW_* to Kconfig
Mario Six
- [U-Boot] [PATCH v3 36/60] mpc83xx: Normalize BR/OR option lines
Mario Six
- [U-Boot] [PATCH v3 37/60] tqm834x: Expand CONFIG_SYS_OR_TIMING_FLASH macro
Mario Six
- [U-Boot] [PATCH v3 38/60] mpc83xx: Simplify BR,OR lines
Mario Six
- [U-Boot] [PATCH v3 39/60] sbc8349: Remove SDRAM functionality
Mario Six
- [U-Boot] [PATCH v3 40/60] mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig
Mario Six
- [U-Boot] [PATCH v3 41/60] powerpc: mpc83xx: Fix MPC8308 IMMR memory layout
Mario Six
- [U-Boot] [PATCH v3 42/60] powerpc: mpc83xx: Implement get_serial_clock()
Mario Six
- [U-Boot] [PATCH v3 43/60] powerpc: mpc83xx: fdt: Use get_serial_clock()
Mario Six
- [U-Boot] [PATCH v3 44/60] mpc83xx: Remove last CONFIG_MPC83xx
Mario Six
- [U-Boot] [PATCH v3 45/60] mpc83xx: Prepare usage of DM gpio driver
Mario Six
- [U-Boot] [PATCH v3 46/60] mpc83xx: Migrate HID config to Kconfig
Mario Six
- [U-Boot] [PATCH v3 47/60] mpc83xx: Migrate CONFIG_SYS_IMMR to Kconfig
Mario Six
- [U-Boot] [PATCH v3 48/60] mpc8308: Migrate system io config to Kconfig
Mario Six
- [U-Boot] [PATCH v3 49/60] mpc83xx: Migrate arbiter config to Kconfig
Mario Six
- [U-Boot] [PATCH v3 50/60] mpc83xx: Migrate SPCR to Kconfig
Mario Six
- [U-Boot] [PATCH v3 51/60] mpc83xx: Migrate CONFIG_LCRR_* to Kconfig
Mario Six
- [U-Boot] [PATCH v3 52/60] mpc83xx: Get rid of CONFIG_SYS_DDR_BASE
Mario Six
- [U-Boot] [PATCH v3 53/60] mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE
Mario Six
- [U-Boot] [PATCH v3 54/60] mpc83xx: Get rid of CONFIG_SYS_LBC_*
Mario Six
- [U-Boot] [PATCH v3 55/60] mpc83xx: Add arch clock.h to make SDHC work
Mario Six
- [U-Boot] [PATCH v3 56/60] mpc83xx: Don't define cpu_eth_init for DM eth
Mario Six
- [U-Boot] [PATCH v3 57/60] mpc83xx: Replace ppcDWstore with inline assembly
Mario Six
- [U-Boot] [PATCH v3 58/60] mpc83xx: Use pre-defined asm functions
Mario Six
- [U-Boot] [PATCH v3 59/60] keymile: Remove CONFIG_SYS_APP{1, 2}_{BASE, SIZE}
Mario Six
- [U-Boot] [PATCH v3 60/60] keymile: Factor out common includes again
Mario Six
- [U-Boot] [PATCH v3 01/60] mpc83xx: Introduce ARCH_MPC830*
Mario Six
- [U-Boot] [PATCH] powerpc: Simplify processor.h
Mario Six
- [U-Boot] [PATCH] mpc83xx: Define _end symbol
Mario Six
- [U-Boot] [PATCH] mpc83xx_clk: Add enable method
Mario Six
- [U-Boot] [PATCH 1/2] cmd: binop: Use new environment api
Mario Six
- [U-Boot] [PATCH 2/2] cmd: binop: Use hex2bin
Mario Six
- [U-Boot] [PATCH 1/2] i2c: ihs: Get rid of fpgamap
Mario Six
- [U-Boot] [PATCH 2/2] i2c: ihs: Improve error handling
Mario Six
- [U-Boot] [PATCH 1/2] gdsys_rxaui_ctrl: Return old state
Mario Six
- [U-Boot] [PATCH 2/2] gdsys_rxaui_ctrl: Use new regmap interface
Mario Six
- [U-Boot] [PATCH] ihs_mdio: Use new regmap interface
Mario Six
- [U-Boot] [PATCH] ihs_video_out: Fix error handling
Mario Six
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] [PATCH 0/5] imx8: several fixes
Chris Spencer
- [U-Boot] [PATCH 0/5] imx8: several fixes
Chris Spencer
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism
Christopher Spencer
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Heiko Stuebner
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Heiko Stuebner
- [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Heiko Stuebner
- [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Heiko Stuebner
- [U-Boot] [PATCH 1/2] env: fix allow to build multiple environments
York Sun
- [U-Boot] [u-boot][PATCH] ls1046aqds: Bypass xfi port fixup for KR mode
York Sun
- [U-Boot] [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: fixes for TFABOOT framework
York Sun
- [U-Boot] [RESEND PATCH 1/2] env: fix allow to build multiple environments
York Sun
- [U-Boot] [PATCH 1/2] armv8: ls1043a: add SVR definitions for 23x23 package silicon
York Sun
- [U-Boot] [PATCH] fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi
York Sun
- [U-Boot] [U-Boot, v1] mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: properly configure qdma ICID
York Sun
- [U-Boot] [u-boot][PATCH] ls1046aqds: Bypass xfi port fixup for KR mode
York Sun
- [U-Boot] [PATCH] armv7: dts: ls1021a: Remove aliases property name warning
York Sun
- [U-Boot] [PATCH 1/2] armv8: ls1088ardb: Update MAINTAINERS
York Sun
- [U-Boot] [PATCH v3 01/60] mpc83xx: Introduce ARCH_MPC830*
York Sun
- [U-Boot] [PATCH] mpc85xx: Add support for -msingle-pic-base
York Sun
- [U-Boot] Please pull u-boot-mpc85xx master
York Sun
- [U-Boot] Issue with compiling uboot for SoC-eds arria 10
Sujay Suresh
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
AKASHI Takahiro
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
AKASHI Takahiro
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
AKASHI Takahiro
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 3/3] efi_loader: remove block device details from efi file
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 3/3] efi_loader: remove block device details from efi file
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2] efi_loader: move efi_init_obj_list() to a new efi_setup.c
AKASHI Takahiro
- [U-Boot] [PATCH v2 0/5] efi_loader: run a specific efi application more easily
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/5] efi_loader: bootmgr: allow for running a given load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 3/5] cmd: bootefi: carve out fdt parameter handling
AKASHI Takahiro
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v4 0/9] cmd: add efitool for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v4 1/9] cmd: add efitool command
AKASHI Takahiro
- [U-Boot] [PATCH v4 2/9] cmd: efitool: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v4 3/9] efi_driver: add name to driver binding protocol
AKASHI Takahiro
- [U-Boot] [PATCH v4 4/9] cmd: efitool: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v4 5/9] cmd: efitool: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v4 6/9] cmd: efitool: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v4 7/9] cmd: efitool: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v4 8/9] cmd: efitool: export uefi variable helper functions
AKASHI Takahiro
- [U-Boot] [PATCH v4 9/9] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH v2] efi_loader: move efi_init_obj_list() to a new efi_setup.c
AKASHI Takahiro
- [U-Boot] [PATCH v4 1/9] cmd: add efitool command
AKASHI Takahiro
- [U-Boot] [PATCH v4 2/9] cmd: efitool: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v4 3/9] efi_driver: add name to driver binding protocol
AKASHI Takahiro
- [U-Boot] [PATCH v4 5/9] cmd: efitool: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v4 6/9] cmd: efitool: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v4 7/9] cmd: efitool: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v4 8/9] cmd: efitool: export uefi variable helper functions
AKASHI Takahiro
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH v2 0/2] efi_loader: add GetNextVariableName
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/2] efi_loader: implement GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/2] efi_selftest: fix variables test for GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH v3 0/5] subject: efi_loader: add HII database protocol
AKASHI Takahiro
- [U-Boot] [PATCH v3 1/5] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [PATCH v3 2/5] efi: hii: add guid package support
AKASHI Takahiro
- [U-Boot] [PATCH v3 3/5] efi: hii: add keyboard layout package support
AKASHI Takahiro
- [U-Boot] [PATCH v3 4/5] efi: hii: add HII config routing/access protocols
AKASHI Takahiro
- [U-Boot] [PATCH v3 5/5] efi_selftest: add HII database protocols test
AKASHI Takahiro
- [U-Boot] [PATCH v4 3/9] efi_driver: add name to driver binding protocol
AKASHI Takahiro
- [U-Boot] [PATCH v5 0/7] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v5 2/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v5 3/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v5 4/7] cmd: efidebug: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v5 5/7] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v5 6/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v5 7/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v5 2/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v5 6/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v5 7/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v5 2/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v3 0/5] subject: efi_loader: add HII database protocol
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v5 1/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v6 0/7] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v6 1/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v6 2/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v6 4/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v6 5/7] cmd: efidebug: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v6 6/7] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [RFC 0/3] dm, efi: integrate efi_disk into DM
AKASHI Takahiro
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [RFC 3/3] drivers: align block device drivers with DM-efi integration
AKASHI Takahiro
- [U-Boot] [PATCH v6 0/7] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v6 1/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v6.1] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v6 6/7] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [RFC 3/3] drivers: align block device drivers with DM-efi integration
AKASHI Takahiro
- [U-Boot] [RFC 0/3] dm, efi: integrate efi_disk into DM
AKASHI Takahiro
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [PATCH] mmc: dwmmc: Poll for iDMAC TX/RX interrupt
Ley Foon Tan
- [U-Boot] [PATCH] musb-new: Hide spurious warning in interrupt
Viktoriia Taraniuk
- [U-Boot] [PATCH v2 1/2] dm: MIGRATION: Update migration plan for SPI
Jagan Teki
- [U-Boot] [PATCH v2 2/2] dm: MIGRATION: Update migration plan for DM_SPI_FLASH
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH] Add Hynix H27UBG8T2BTR id
Jagan Teki
- [U-Boot] a8011eb84d not working on V40 (Banana Pi M2 Berry)
Jagan Teki
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jagan Teki
- [U-Boot] [PATCH v2 1/2] dm: MIGRATION: Update migration plan for SPI
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] Booting on RK3399
Jagan Teki
- [U-Boot] Booting on RK3399
Jagan Teki
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v2 2/2] dm: MIGRATION: Update migration plan for DM_SPI_FLASH
Jagan Teki
- [U-Boot] rk3399 sdram data training read gate is looping forever
Jagan Teki
- [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v5.1 19/26] musb-new: sunxi: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Jagan Teki
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Jagan Teki
- [U-Boot] [PATCH v5.1 01/26] clk: Add Allwinner A64 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5.1 02/26] reset: Add Allwinner RESET driver
Jagan Teki
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Jagan Teki
- [U-Boot] [PATCH] mmc: sunxi: Fix mmc clocks for DM_MMC
Jagan Teki
- [U-Boot] [PATCH] mmc: sunxi: Fix mmc clocks for DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2] mmc: sunxi: Fix mmc clocks for DM_MMC
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v2] mmc: sunxi: Fix mmc clocks for DM_MMC
Jagan Teki
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Jagan Teki
- [U-Boot] [PATCH v6 00/20] clk: Add Allwinner CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v6 01/20] clk: Add Allwinner A64 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 02/20] reset: Add Allwinner RESET driver
Jagan Teki
- [U-Boot] [PATCH v6 03/20] clk: sunxi: Add Allwinner H3/H5 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 04/20] clk: sunxi: Add Allwinner A10/A20 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 05/20] clk: sunxi: Add Allwinner A10s/A13 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 06/20] clk: sunxi: Add Allwinner A31 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 07/20] clk: sunxi: Add Allwinner A23/A33 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 08/20] clk: sunxi: Add Allwinner A83T CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 09/20] clk: sunxi: Add Allwinner R40 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 10/20] clk: sunxi: Add Allwinner V3S CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 11/20] clk: sunxi: Implement UART clocks
Jagan Teki
- [U-Boot] [PATCH v6 12/20] clk: sunxi: Implement UART resets
Jagan Teki
- [U-Boot] [PATCH v6 13/20] clk: sunxi: Add Allwinner H6 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6 14/20] sunxi: A64: Update sun50i-a64-ccu.h
Jagan Teki
- [U-Boot] [PATCH v6 15/20] sunxi: Enable CLK
Jagan Teki
- [U-Boot] [PATCH v6 16/20] phy: sun4i-usb: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v6 17/20] reset: Add reset valid
Jagan Teki
- [U-Boot] [PATCH v6 18/20] musb-new: sunxi: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v6 19/20] sunxi: usb: Switch to Generic host controllers
Jagan Teki
- [U-Boot] [PATCH v6 20/20] usb: host: Drop [e-o]hci-sunxi drivers
Jagan Teki
- [U-Boot] [PATCH 1/1] sunxi: board: Add i2c initialization for sun50i
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 1/3] tools: mkimage: Add missing names for imx8mimage and loadables
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 2/3] tools: mkimage: Add Allwinner eGON support
Jagan Teki
- [U-Boot] [PATCH 1/2] ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Jagan Teki
- [U-Boot] [PATCH 2/2] clk: sunxi: Add Allwinner A80 CLK driver
Jagan Teki
- [U-Boot] [PATCH v6.1 15/20] arm: sunxi: Enable CLK, RESET
Jagan Teki
- [U-Boot] [PATCH 1/2] ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 2/3] tools: mkimage: Add Allwinner eGON support
Jagan Teki
- [U-Boot] memcpy/memset on arm64 platforms
Jagan Teki
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH 1/7] mmc: sunxi: Configure reset support for DM_MMC
Jagan Teki
- [U-Boot] [PATCH 2/7] mmc: sunxi: Add A83T emmc compatible
Jagan Teki
- [U-Boot] [PATCH 3/7] mmc: sunxi: Add mmc, emmc H5/A64 compatible
Jagan Teki
- [U-Boot] [PATCH 4/7] mmc: sunxi: Add DM_MMC support for H6
Jagan Teki
- [U-Boot] [PATCH 5/7] mmc: sunxi: Add DM_MMC support for A80
Jagan Teki
- [U-Boot] [PATCH 6/7] arm: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH 7/7] arm: dts: sunxi: Enumerate MMC2 as MMC1
Jagan Teki
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] 2019.01 release question
Jagan Teki
- [U-Boot] [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2 1/7] mmc: sunxi: Configure reset support for DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2 2/7] mmc: sunxi: Add A83T emmc compatible
Jagan Teki
- [U-Boot] [PATCH v2 3/7] mmc: sunxi: Add mmc, emmc H5/A64 compatible
Jagan Teki
- [U-Boot] [PATCH v2 4/7] mmc: sunxi: Add DM_MMC support for H6
Jagan Teki
- [U-Boot] [PATCH v2 5/7] mmc: sunxi: Add DM_MMC support for A80
Jagan Teki
- [U-Boot] [PATCH v2 6/7] arm: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2 7/7] arm: dts: sunxi: Enumerate MMC2 as MMC1
Jagan Teki
- [U-Boot] [PATCH 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Jagan Teki
- [U-Boot] [PATCH 2/2] Kconfig: Add u-boot.itb BUILD_TARGET for RK3368/3399
Jagan Teki
- [U-Boot] [PATCH 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Jagan Teki
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Jagan Teki
- [U-Boot] [PATCH v2 2/2] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip
Jagan Teki
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH 1/2] ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Jagan Teki
- [U-Boot] [PATCH v6 00/20] clk: Add Allwinner CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v6.1 15/20] arm: sunxi: Enable CLK, RESET
Jagan Teki
- [U-Boot] [PATCH v2 0/7] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 0/9] sunxi: enable DM_MMC
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Jagan Teki
- [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v3 1/9] sunxi: clk: add MMC gates/resets
Jagan Teki
- [U-Boot] [PATCH v3 2/9] sunxi: clk: A80: add MMC clock support
Jagan Teki
- [U-Boot] [PATCH v3 3/9] mmc: sunxi: Add A83T emmc compatible
Jagan Teki
- [U-Boot] [PATCH v3 4/9] mmc: sunxi: Add mmc, emmc H5/A64 compatible
Jagan Teki
- [U-Boot] [PATCH v3 5/9] mmc: sunxi: Add DM_MMC support for H6
Jagan Teki
- [U-Boot] [PATCH v3 6/9] mmc: sunxi: Add DM_MMC support for A80
Jagan Teki
- [U-Boot] [PATCH v3 7/9] dm: mmc: sunxi: Add CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v3 8/9] arm: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Jagan Teki
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Jagan Teki
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 7/9] mmc: sunxi: Honour non-removable property in DT
Jagan Teki
- [U-Boot] [PATCH] sunxi: amarula_a64_relic: Enable USB host
Jagan Teki
- [U-Boot] [PATCH v3.1 9/9] arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1
Jagan Teki
- [U-Boot] [PATCH v3.1 1/9] sunxi: clk: add MMC gates/resets
Jagan Teki
- [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH] sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi
Jagan Teki
- [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [linux-sunxi] Re: [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v2 09/11] configs: Remove SF_DUAL_FLASH
Jagan Teki
- [U-Boot] [PATCH v2 04/11] mtd: spi: Port SPI NOR framework from Linux
Jagan Teki
- [U-Boot] [PATCH v2 09/11] configs: Remove SF_DUAL_FLASH
Jagan Teki
- [U-Boot] [PATCH v2 01/11] spi-mem: Claim SPI bus before spi mem access
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Jagan Teki
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v4 2/9] sunxi: clk: add MMC gates/resets
Jagan Teki
- [U-Boot] [PATCH v4 3/9] sunxi: clk: A80: add MMC clock support
Jagan Teki
- [U-Boot] [PATCH v4 4/9] mmc: sunxi: Add remaining compatible strings
Jagan Teki
- [U-Boot] [PATCH v4 5/9] mmc: sunxi: Add DM_MMC support for H6
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH v4 3/9] sunxi: clk: A80: add MMC clock support
Jagan Teki
- [U-Boot] [PATCH v4 6/9] mmc: sunxi: Add DM clk and reset support
Jagan Teki
- [U-Boot] [PATCH v4 7/9] sunxi: board: do MMC pinmux setup for DM_MMC builds
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH 7/9] mmc: sunxi: Honour non-removable property in DT
Jagan Teki
- [U-Boot] [PATCH v3.1 9/9] arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1
Jagan Teki
- [U-Boot] [PATCH] sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH] sunxi: amarula_a64_relic: Enable USB host
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH v4 0/9] mmc: sunxi: Enable DM_MMC
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] [PATCH v4 1/9] sunxi: clk: enable clk and reset for CCU devices
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v1 06/15] dm: clk: imx: Add support for controlling imx6q clocks via Driver Model
Jagan Teki
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Jagan Teki
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 14/20] mtd: spi: Switch to new SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Jagan Teki
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Jagan Teki
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Jagan Teki
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] Nand boot on imx6q board is broken
Jagan Teki
- [U-Boot] Help: CONFIG_ENV_IS_IN_SPI_FLASH on AllWinner H5?
Jagan Teki
- [U-Boot] [PATCH] cmd: ximg: Invert check for fit image compression
Stefan Theil
- [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
Joakim Tjernlund
- [U-Boot] [RFC PATCH 0/8] Actions S700 SoC support
Amit Singh Tomar
- [U-Boot] [RFC PATCH 1/8] arm: actions: Add common framework for Actions Semi SoCs
Amit Singh Tomar
- [U-Boot] [RFC PATCH 2/8] arm: actions: Add owl memory map regions
Amit Singh Tomar
- [U-Boot] [RFC PATCH 3/8] clk: actions: Add common clock driver
Amit Singh Tomar
- [U-Boot] [RFC PATCH 4/8] arm: board: Remove board files for bubblegum_96
Amit Singh Tomar
- [U-Boot] [RFC PATCH 5/8] arm: actions: add S700 SoC device tree
Amit Singh Tomar
- [U-Boot] [RFC PATCH 6/8] arm: add Cubieboard7 board support
Amit Singh Tomar
- [U-Boot] [RFC PATCH 7/8] serial: actions: add uart support for s700
Amit Singh Tomar
- [U-Boot] [RFC PATCH 8/8] actions: add Cubieboard7 README
Amit Singh Tomar
- [U-Boot] [PATCH v2 1/9] arm: actions: Add common framework for Actions Semi SoCs
Amit Singh Tomar
- [U-Boot] [PATCH v2 2/9] arm: actions: Add owl memory map regions
Amit Singh Tomar
- [U-Boot] [PATCH v3 3/9] clk: actions: Add common clock driver
Amit Singh Tomar
- [U-Boot] [PATCH v2 4/9] arm: add support Actions Semi S700
Amit Singh Tomar
- [U-Boot] [PATCH v2 5/9] arm: actions: add S700 SoC device tree
Amit Singh Tomar
- [U-Boot] [PATCH v2 6/9] arm: add Cubieboard7 board support
Amit Singh Tomar
- [U-Boot] [PATCH v2 7/9] actions:s700: add u-boot specific dts file
Amit Singh Tomar
- [U-Boot] [PATCH v2 8/9] serial: actions: add uart support for s700
Amit Singh Tomar
- [U-Boot] [PATCH v2 9/9] actions: add Cubieboard7 README
Amit Singh Tomar
- [U-Boot] [RFC PATCH 5/8] arm: actions: add S700 SoC device tree
Amit Tomer
- [U-Boot] [U-Boot,1/2] rockchip: rk3036: ram: update license
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: ram: update license for sdram driver
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 1/8] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 2/8] power: regulator: Allow PWM regulator to be omitted from SPL.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 3/8] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 5/8] rockchip: rk3399: Add improved pinctrl driver.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 6/8] rockchip: rk3399: Add Kconfig option for full pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 7/8] rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 8/8] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip fixes for 2019.1
Philipp Tomsich
- [U-Boot] Booting on RK3399
Philipp Tomsich
- [U-Boot] [PATCH] Kconfig: don't pollute Kconfig w/ i.MX8M options for everyone
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now[Please note, mail behalf by 3vnmnxammciszqnjoyvtpbt.vynrlcly.fhunyvjr-jopwz.jvt at chromium-sendgmr.bounces.google.com]
Philipp Tomsich
- [U-Boot] [PATCH] Kconfig: don't pollute Kconfig w/ i.MX8M options for everyone
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3399: fix missing braces in full pinctrl
Philipp Tomsich
- [U-Boot] [U-Boot,1/2] rockchip: rk3036: ram: update license
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: ram: update license for sdram driver
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 1/8] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 2/8] power: regulator: Allow PWM regulator to be omitted from SPL.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 3/8] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 5/8] rockchip: rk3399: Add improved pinctrl driver.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 6/8] rockchip: rk3399: Add Kconfig option for full pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 7/8] rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 8/8] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip
Philipp Tomsich
- [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Philipp Tomsich
- [U-Boot] memcpy/memset on arm64 platforms
Philipp Tomsich
- [U-Boot] memcpy/memset on arm64 platforms
Philipp Tomsich
- [U-Boot] [PATCH 09/10] video: Kconfig: spelling fixes
Philipp Tomsich
- [U-Boot] [PATCH] dtoc: make generated platdata structs const
Philipp Tomsich
- [U-Boot] [RESENT PATCH v3] rockchip: update emmc/sd index for distro boot order
Philipp Tomsich
- [U-Boot] [U-Boot, 1/4] rockchip: rk3288: Add i2s pinctrl and clock support
Philipp Tomsich
- [U-Boot] [U-Boot,2/4] rockchip: Add an I2S driver
Philipp Tomsich
- [U-Boot] [U-Boot,3/4] rockchip: Add a sound driver
Philipp Tomsich
- [U-Boot] [U-Boot, 4/4] sound: rockchip: Add sound support for jerry
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: chromebook_minnie: Enable sound
Philipp Tomsich
- [U-Boot] [U-Boot, 1/4] rockchip: rk3288: Add i2s pinctrl and clock support
Philipp Tomsich
- [U-Boot] [U-Boot,2/4] rockchip: Add an I2S driver
Philipp Tomsich
- [U-Boot] [U-Boot,3/4] rockchip: Add a sound driver
Philipp Tomsich
- [U-Boot] [U-Boot, 4/4] sound: rockchip: Add sound support for jerry
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: chromebook_minnie: Enable sound
Philipp Tomsich
- [U-Boot] [RFC 1/3] dm: blk: add UCLASS_PARTITION
Philipp Tomsich
- [U-Boot] input in flex scanner failed (for rpi_0_w_defconfig)
Philipp Tomsich
- [U-Boot] RK3399/RK3288 same-as-spl Option
Philipp Tomsich
- [U-Boot] RK3399/RK3288 same-as-spl Option
Philipp Tomsich
- [U-Boot] rockchip: dts: rk3399-firely: add 'same-as-spl'
Philipp Tomsich
- [U-Boot] [U-Boot, v3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/9] rk3288: chrome: defconfig: Enable FDT for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Philipp Tomsich
- [U-Boot] rockchip: dts: rk3399-firely: add 'same-as-spl'
Philipp Tomsich
- [U-Boot] [U-Boot, v3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/9] rk3288: chrome: defconfig: Enable FDT for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 01/19] lib: Allow using display_buffer() in SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 02/19] clk: Improve debug message in clk_set_default_rates()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 03/19] gpio: Use more command-specific enums values
Philipp Tomsich
- [U-Boot] [U-Boot,v2,04/19] gpio: Add a simple GPIO API for SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 05/19] rockchip: Add mention of other boards
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 06/19] rockchip: Drop note about supporting other SoCs
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 07/19] rockchip: Bring in device tree files for rk3399-gru
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 08/19] rockchip: Adjust rk3399 device tree to be closer to linux
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 09/19] rockchip: evb_rk3399: Tidy up the README
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 10/19] rockchip: Clarify docs on SPI writing
Philipp Tomsich
- [U-Boot] [U-Boot,v2,11/19] rockchip: Allow booting from SPI
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 12/19] rockchip: Add settings for Samsung LPDDR3 4GB SDRAM 1866MHz
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 13/19] rockchip: clk: Add mention of four new clocks
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 14/19] rockchip: Tidy up board include-file ordering
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 15/19] rockchip: rk3399: Add ROCKCHIP_DEVICE_SETTINGS to set env
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 16/19] rockchip: Move pull-up/down enum into a common file
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 17/19] rockchip: Implement spl_gpio in the GPIO driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 18/19] rockchip: gru: Add extra device-tree settings
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 19/19] rockchip: Add support for chromebook_bob
Philipp Tomsich
- [U-Boot] [PATCH v1 2/2] x86: edison: Switch to CONFIG_OF_SEPARATE
Ferry Toth
- [U-Boot] [PATCH v1 2/2] x86: edison: Switch to CONFIG_OF_SEPARATE
Ferry Toth
- [U-Boot] BPI-M2 Magic: DRAM:Timeout initialising DRAM
Michael Nazzareno Trimarchi
- [U-Boot] Issue with compiling uboot for SoC-eds arria 10
Michael Nazzareno Trimarchi
- [U-Boot] Issue with compiling uboot for SoC-eds arria 10
Michael Nazzareno Trimarchi
- [U-Boot] Nand boot on imx6q board is broken
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH 1/2] ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] [PATCH 2/9] sunxi: clk: A80: add MMC clock support
Chen-Yu Tsai
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Chen-Yu Tsai
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Chen-Yu Tsai
- [U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1
Chen-Yu Tsai
- [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Chen-Yu Tsai
- [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Chen-Yu Tsai
- [U-Boot] [PATCH 0/3] sunxi: Sync Bananapi M2+ dts files and add H5 variant
Chen-Yu Tsai
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Chen-Yu Tsai
- [U-Boot] [PATCH 3/3] sunxi: Add Bananapi M2+ H5 board
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC
Chen-Yu Tsai
- [U-Boot] [upstream-release] [PATCH] pci: layerscape: add option to statically allocate PCI StreamIDs
Laurentiu Tudor
- [U-Boot] [PATCH 0/3] PSCI support for r8a7790 SoC (Lager/Stout boards)
Oleksandr Tyshchenko
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr Tyshchenko
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr Tyshchenko
- [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands
Oleksandr Tyshchenko
- [U-Boot] [PATCH 4/6] dma: ti: add driver to K3 UDMA
Peter Ujfalusi
- [U-Boot] [PATCH] bmips: fix config warnings from 2019.01
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
Marek Vasut
- [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Marek Vasut
- [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Marek Vasut
- [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
Marek Vasut
- [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Marek Vasut
- [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
Marek Vasut
- [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes
Marek Vasut
- [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver
Marek Vasut
- [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6)
Marek Vasut
- [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks
Marek Vasut
- [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number
Marek Vasut
- [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description
Marek Vasut
- [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Marek Vasut
- [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Marek Vasut
- [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties
Marek Vasut
- [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Marek Vasut
- [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations
Marek Vasut
- [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver
Marek Vasut
- [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number
Marek Vasut
- [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description
Marek Vasut
- [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6)
Marek Vasut
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Marek Vasut
- [U-Boot] [PATCH 1/1] cmd: usb: display bus number
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Marek Vasut
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
Marek Vasut
- [U-Boot] [PATCH] mmc: Add support for downgrading HS200/HS400 to HS mode
Marek Vasut
- [U-Boot] [PATCH 1/2] cmd: mmc: Force mmc reinit when no card present
Marek Vasut
- [U-Boot] [PATCH 2/2] cmd: mmc: Invalidate MMC block cache after init
Marek Vasut
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH] usb: xhci-mem: Fix scratchpad array issue
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Marek Vasut
- [U-Boot] [PATCH 1/1] altera_pio: fix get_value
Marek Vasut
- [U-Boot] [PATCH 1/1] altera_pio: fix get_value
Marek Vasut
- [U-Boot] [PATCH v2 1/1] altera_pio: fix get_value
Marek Vasut
- [U-Boot] [PATCH v5.1 19/26] musb-new: sunxi: Use CLK and RESET support
Marek Vasut
- [U-Boot] [PATCH 2/2] MIPS: jz47xx: remove custom u-boot-spl.lds
Marek Vasut
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Marek Vasut
- [U-Boot] [PATCH 2/2] MIPS: jz47xx: remove custom u-boot-spl.lds
Marek Vasut
- [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (04.01.2019)
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH] spl: ymodem: Add support for loading gzip compressed uImage
Marek Vasut
- [U-Boot] [PATCH] lib: uuid: Do not enable UUID command SPL
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH] musb-new: Hide spurious warning in interrupt
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Marek Vasut
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Marek Vasut
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Marek Vasut
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 2/4] arm: socfpga: fix compiling with OF_PLATDATA
Marek Vasut
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Marek Vasut
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Marek Vasut
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Marek Vasut
- [U-Boot] [PATCH PATCH v1 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Marek Vasut
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v2] usb: xhci-mem: Fix scratchpad array issue
Marek Vasut
- [U-Boot] [PATCH 1/3] arm: socfpga: move legacy i2c defines to vining
Marek Vasut
- [U-Boot] [PATCH 2/3] arm: socfpga: clean up socfpga_common.h
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Marek Vasut
- [U-Boot] [PATCH 1/3] arm: socfpga: move legacy i2c defines to vining
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (10.01.2019)
Marek Vasut
- [U-Boot] [PATCH PATCH v2 0/2] Use CONFIG_USB_GADGET and CONFIG_SPL_USB_GADGET to select the USB gadget code
Marek Vasut
- [U-Boot] [PATCH 1/3] net: designware: socfpga: adapt to Gen5
Marek Vasut
- [U-Boot] [PATCH 2/3] arm: socfpga: gen5 enable designware_socfpga
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Marek Vasut
- [U-Boot] [PATCH 1/3] net: designware: socfpga: adapt to Gen5
Marek Vasut
- [U-Boot] [PATCH 2/3] arm: socfpga: gen5 enable designware_socfpga
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] memcpy/memset on arm64 platforms
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga
Marek Vasut
- [U-Boot] [PATCH v2 3/3] arm: socfpga: gen5: remove hacked ETH RST handling
Marek Vasut
- [U-Boot] [PATCH v2 1/3] net: designware: socfpga: adapt to Gen5
Marek Vasut
- [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga
Marek Vasut
- [U-Boot] [PATCH v3 0/3] arm: socpfpga: gen5 clean up ETH RST & PHY mode
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: make debug uart work on socfpga_gen5
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH v1 1/4] arm: socfpga: imply SPL config instead of select
Marek Vasut
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Marek Vasut
- [U-Boot] [PATCH 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Marek Vasut
- [U-Boot] [PATCH 4/5] spi: cadence_qspi: add reset handling
Marek Vasut
- [U-Boot] [PATCH 5/5] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH 4/5] spi: cadence_qspi: add reset handling
Marek Vasut
- [U-Boot] [PATCH 5/5] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH 1/5] arm: socfpga: gen5: add reset handles to devicetrees
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH] mmc: tmio: Make DMA transfer end bit configurable
Marek Vasut
- [U-Boot] [PATCH] mmc: tmio: renesas: Add 1uS delay after DMA completion on older IPs
Marek Vasut
- [U-Boot] [PATCH 2/5] arm: socfpga: move SDR reset handling to driver
Marek Vasut
- [U-Boot] [PATCH] mmc: dwmmc: Poll for iDMAC TX/RX interrupt
Marek Vasut
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH v2 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v7 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v7 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Marek Vasut
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [RFC 00/17] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [RFC 01/17] common: Break USB_STORAGE dependency between SPL and u-boot proper
Abel Vesa
- [U-Boot] [RFC 02/17] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Abel Vesa
- [U-Boot] [RFC 03/17] configs: imx6sabreauto: Add DM_MMC support
Abel Vesa
- [U-Boot] [RFC 04/17] configs: imx6sabreauto: Add DM_USB support
Abel Vesa
- [U-Boot] [RFC 05/17] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [RFC 06/17] arm: imx: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [RFC 07/17] dts: imx: Add imx6q-sabreauto dts and imx6qdl-sabreauto dtsi files
Abel Vesa
- [U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files
Abel Vesa
- [U-Boot] [RFC 09/17] arm: imx: Add FIT SPL its
Abel Vesa
- [U-Boot] [RFC 10/17] configs: mx6sabreauto: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [RFC 11/17] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [RFC 12/17] mx6sabreauto: Add DM_GPIO support
Abel Vesa
- [U-Boot] [RFC 13/17] mx6sabresd: Add DM_GPIO support
Abel Vesa
- [U-Boot] [RFC 14/17] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [RFC 15/17] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [RFC 16/17] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [RFC 17/17] board: mx6sabresd: Remove non-DM code
Abel Vesa
- [U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files
Abel Vesa
- [U-Boot] [PATCH 00/26] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH 01/26] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
- [U-Boot] [PATCH 02/26] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Abel Vesa
- [U-Boot] [PATCH 03/26] configs: imx6sabreauto: Add DM_MMC support
Abel Vesa
- [U-Boot] [PATCH 04/26] configs: imx6sabreauto: Add DM_USB support
Abel Vesa
- [U-Boot] [PATCH 05/26] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [PATCH 06/26] arm: imx: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH 07/26] arm: dts: Add devicetree for i.MX6QP
Abel Vesa
- [U-Boot] [PATCH 08/26] arm: dts: Add imx6qdl-sabreauto dtsi file
Abel Vesa
- [U-Boot] [PATCH 09/26] arm: dts: Add imx6qdl-sabresd dtsi file
Abel Vesa
- [U-Boot] [PATCH 10/26] arm: dts: Add all imx6sabre u-boot dtsi files
Abel Vesa
- [U-Boot] [PATCH 11/26] arm: dts: Add imx6q-sabreauto dts file
Abel Vesa
- [U-Boot] [PATCH 12/26] arm: dts: Add imx6q-sabresd dts file
Abel Vesa
- [U-Boot] [PATCH 13/26] arm: dts: Add imx6dl-sabreauto dts file
Abel Vesa
- [U-Boot] [PATCH 14/26] arm: dts: Add imx6dl-sabresd dts file
Abel Vesa
- [U-Boot] [PATCH 15/26] arm: dts: Add imx6qp-sabreauto dts file
Abel Vesa
- [U-Boot] [PATCH 16/26] arm: dts: Add imx6qp-sabresd dts file
Abel Vesa
- [U-Boot] [PATCH 17/26] arm: imx: Add FIT SPL its
Abel Vesa
- [U-Boot] [PATCH 18/26] configs: mx6sabreauto: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH 20/26] mx6sabreauto: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH 21/26] mx6sabresd: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH 22/26] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH 23/26] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH 24/26] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [PATCH 25/26] board: mx6sabresd: Remove non-DM code
Abel Vesa
- [U-Boot] [PATCH 26/26] board: mx6sabresd: Remove the enet reset gpio handling
Abel Vesa
- [U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH 01/26] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
- [U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v2 00/22] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v2 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
- [U-Boot] [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Abel Vesa
- [U-Boot] [PATCH v2 03/22] configs: imx6sabreauto: Add DM_MMC support
Abel Vesa
- [U-Boot] [PATCH v2 04/22] configs: imx6sabreauto: Add DM_USB support
Abel Vesa
- [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v2 07/22] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Abel Vesa
- [U-Boot] [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Abel Vesa
- [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its
Abel Vesa
- [U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v2 12/22] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v2 14/22] mx6sabresd: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v2 16/22] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [PATCH v2 18/22] board: mx6sabresd: Remove non-DM code
Abel Vesa
- [U-Boot] [PATCH v2 19/22] board: mx6sabresd: Remove the enet reset gpio handling
Abel Vesa
- [U-Boot] [PATCH v2 20/22] configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI
Abel Vesa
- [U-Boot] [PATCH v2 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info
Abel Vesa
- [U-Boot] [PATCH v2 22/22] board: mx6sabresd: Update README with the SPL DM FIT info
Abel Vesa
- [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Abel Vesa
- [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Abel Vesa
- [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v3 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
- [U-Boot] [PATCH v3 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Abel Vesa
- [U-Boot] [PATCH v3 03/22] configs: imx6sabreauto: Add DM_MMC support
Abel Vesa
- [U-Boot] [PATCH v3 04/22] configs: imx6sabreauto: Add DM_USB support
Abel Vesa
- [U-Boot] [PATCH v3 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [PATCH v3 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v3 07/22] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v3 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Abel Vesa
- [U-Boot] [PATCH v3 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Abel Vesa
- [U-Boot] [PATCH v3 10/22] arm: imx: Add FIT SPL its
Abel Vesa
- [U-Boot] [PATCH v3 11/22] configs: mx6sabreauto: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v3 12/22] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v3 13/22] mx6sabreauto: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v3 14/22] mx6sabresd: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v3 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v3 16/22] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v3 17/22] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [PATCH v3 18/22] board: mx6sabresd: Remove non-DM code
Abel Vesa
- [U-Boot] [PATCH v3 19/22] board: mx6sabresd: Remove the enet reset gpio handling
Abel Vesa
- [U-Boot] [PATCH v3 20/22] configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI
Abel Vesa
- [U-Boot] [PATCH v3 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info
Abel Vesa
- [U-Boot] [PATCH v3 22/22] board: mx6sabresd: Update README with the SPL DM FIT info
Abel Vesa
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v3 00/22] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH] arm64: mvebu: Add basic support for uDPU board
Vladimir Vid
- [U-Boot] [PATCH v2] arm64: mvebu: Add basic support for uDPU board
Vladimir Vid
- [U-Boot] [PATCH v3] arm64: mvebu: Add basic support for uDPU board
Vladimir Vid
- [U-Boot] [PATCH v4] arm64: mvebu: Add basic support for uDPU board
Vladimir Vid
- [U-Boot] Probing flash before Env setup (Env in UBI)
Dominik Vogt
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Petr Vorel
- [U-Boot] [PATCH] spi: designware: Fix issue when CONFIG_BOARD_TYPES is defined
Horatiu Vultur
- [U-Boot] [PATCH 0/7] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH 2/7] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH 3/7] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH 4/7] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH 5/7] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH 6/7] MSCC: add configuration for Jaguar2 SOC family.
Horatiu Vultur
- [U-Boot] [PATCH 7/7] MSCC: Add board support for Jaguar2 SOC family.
Horatiu Vultur
- [U-Boot] [PATCH v2] spi: soft_spi: Fix for soft_spi
Horatiu Vultur
- [U-Boot] [PATCH v2] spi: soft_spi: Fix for soft_spi
Horatiu Vultur
- [U-Boot] [PATCH v2] spi: soft_spi: Fix null ptr when probing soft_spi.
Horatiu Vultur
- [U-Boot] [PATCH v2 0/7] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 2/7] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 3/7] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v2 4/7] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v2 5/7] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v2 6/7] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2] spi: soft_spi: Fix null ptr when probing soft_spi.
Horatiu Vultur
- [U-Boot] [PATCH v2 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v2 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v3 0/7] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v3 1/7] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v3 2/7] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v3 3/7] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v3 4/7] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v3 5/7] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v3 6/7] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v3 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v4 0/6] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v4 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v4 2/6] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v4 3/6] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v4 4/6] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v4 5/6] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v4 6/6] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v5 0/6] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v5 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v5 2/6] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v5 3/6] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v5 4/6] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v5 5/6] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v5 6/6] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v6 0/6] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v6 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v6 2/6] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v6 3/6] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v6 4/6] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v6 5/6] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v6 6/6] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v7 0/6] MSCC: Add Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v7 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v7 2/6] MSCC: Add support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [PATCH v7 3/6] MSCC: Add device tree for Jaguar2 board
Horatiu Vultur
- [U-Boot] [PATCH v7 4/6] MSCC: Add device tree for Jaguar2-48 board
Horatiu Vultur
- [U-Boot] [PATCH v7 5/6] MSCC: add device tree for Serval2 board
Horatiu Vultur
- [U-Boot] [PATCH v7 6/6] MSCC: Add board support for Jaguar2 SOC family
Horatiu Vultur
- [U-Boot] [RESEND PATCH v2] env: add spi_flash_read_env function
Horatiu Vultur
- [U-Boot] [PATCH 0/2] MSCC: Add sysreset driver for MSCC SoCs
Horatiu Vultur
- [U-Boot] [PATCH 1/2] MSCC: Add sysreset drivers for MSCC Socs
Horatiu Vultur
- [U-Boot] [PATCH 2/2] MSCC: Remove reset.c
Horatiu Vultur
- [U-Boot] [PATCH 0/3] MSCC: Add Servalt SoC family
Horatiu Vultur
- [U-Boot] [PATCH 1/3] pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 2/3] MSCC: Add support for Servalt SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 3/3] MSCC: Add board support for Servalt SoC family
Horatiu Vultur
- [U-Boot] [PATCH 0/3] mtd: spi: Add MSCC SPI flash driver
Horatiu Vultur
- [U-Boot] [PATCH 1/3] mtd: spi: export functions to sf_internal.h
Horatiu Vultur
- [U-Boot] [PATCH 2/3] mtd: spi: add MSCC SPI flash driver
Horatiu Vultur
- [U-Boot] [PATCH 3/3] mips: mscc: use MSCC SPI flash driver for Luton
Horatiu Vultur
- [U-Boot] [PATCH 1/2] MSCC: Add sysreset drivers for MSCC Socs
Horatiu Vultur
- [U-Boot] [PATCH 2/2] MSCC: Remove reset.c
Horatiu Vultur
- [U-Boot] [PATCH 1/3] mtd: spi: export functions to sf_internal.h
Horatiu Vultur
- [U-Boot] [PATCH v2 0/3] MSCC: Add Servalt SoC family
Horatiu Vultur
- [U-Boot] [PATCH v2 1/3] pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.
Horatiu Vultur
- [U-Boot] [PATCH v2 2/3] MSCC: Add support for Servalt SoC family.
Horatiu Vultur
- [U-Boot] [PATCH v2 3/3] MSCC: Add board support for Servalt SoC family
Horatiu Vultur
- [U-Boot] commit 9a9d66f5ef break U-Boot Env
Horatiu Vultur
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Horatiu Vultur
- [U-Boot] [PATCH 0/5] MSCC: Add Serval SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 1/5] pinctrl: mscc: Add gpio and pinctrl for Serval SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 2/5] MSCC: Add support for Serval SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 3/5] MSCC: add device tree for Serval pcb105 board
Horatiu Vultur
- [U-Boot] [PATCH 4/5] MSCC: Add device tree for Serval pcb106 board
Horatiu Vultur
- [U-Boot] [PATCH 5/5] MSCC: Add board support for Serval SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 0/5] MSCC: Add Serval SoC family.
Horatiu Vultur
- [U-Boot] [PATCH 0/3] Add network support for Luton SoCs
Horatiu Vultur
- [U-Boot] [PATCH 1/3] MIPS: mscc: luton: Add ethernet nodes for Luton.
Horatiu Vultur
- [U-Boot] [PATCH 2/3] net: add MSCC Luton switch support
Horatiu Vultur
- [U-Boot] [PATCH 3/3] configs: mscc_luton: add network support.
Horatiu Vultur
- [U-Boot] [PATCH] MSCC: Jaguar2 enable debug uart
Horatiu Vultur
- [U-Boot] [PATCH] MSCC: Fix Jaguar2 board detection.
Horatiu Vultur
- [U-Boot] [PATCH v2 0/8] Add network support for Luton SoCs
Horatiu Vultur
- [U-Boot] [PATCH v2 1/8] net: mscc: Move ocelot_switch to mscc_switch folder.
Horatiu Vultur
- [U-Boot] [PATCH v2 2/8] net: mscc: Move miim commands into separate file.
Horatiu Vultur
- [U-Boot] [PATCH v2 3/8] net: mscc: Move ocelot_send and ocelot_recv in a different file.
Horatiu Vultur
- [U-Boot] [PATCH v2 4/8] net: mscc: Move mac_table_add function into different file.
Horatiu Vultur
- [U-Boot] [PATCH v2 5/8] net: mscc: Remove unused variables
Horatiu Vultur
- [U-Boot] [PATCH v2 6/8] mips: mscc: luton: Add ethernet nodes for Luton.
Horatiu Vultur
- [U-Boot] [PATCH v2 7/8] net: Add MSCC Luton networkd driver.
Horatiu Vultur
- [U-Boot] [PATCH v2 8/8] configs: mscc_luton: Add network support.
Horatiu Vultur
- [U-Boot] [PATCH v3 0/8] Add network support for Luton SoCs
Horatiu Vultur
- [U-Boot] [PATCH v3 1/8] net: mscc: Move ocelot_switch to mscc_eswitch folder
Horatiu Vultur
- [U-Boot] [PATCH v3 2/8] net: mscc: Move miim commands into separate file.
Horatiu Vultur
- [U-Boot] [PATCH v3 3/8] net: mscc: Move ocelot_send and ocelot_recv in a different file.
Horatiu Vultur
- [U-Boot] [PATCH v3 4/8] net: mscc: Move mac_table_add function into different file.
Horatiu Vultur
- [U-Boot] [PATCH v3 5/8] net: mscc: Remove unused variables
Horatiu Vultur
- [U-Boot] [PATCH v3 6/8] mips: mscc: luton: Add ethernet nodes for Luton.
Horatiu Vultur
- [U-Boot] [PATCH v3 7/8] net: Add MSCC Luton networkd driver.
Horatiu Vultur
- [U-Boot] [PATCH v3 8/8] configs: mscc_luton: Add network support.
Horatiu Vultur
- [U-Boot] [PATCH 0/3] Introduce regulator_set_enable_if_allowed()
Lokesh Vutla
- [U-Boot] [PATCH 1/3] Revert "power: regulator: Return success on attempt to disable an always-on regulator"
Lokesh Vutla
- [U-Boot] [PATCH 2/3] power: regulator: Introduce regulator_set_enable_if_allowed api
Lokesh Vutla
- [U-Boot] [PATCH 3/3] mmc: omap_hsmmc: Use regulator_set_enable_if_allowed for enabling regulator
Lokesh Vutla
- [U-Boot] memcpy/memset on arm64 platforms
Lokesh Vutla
- [U-Boot] [PATCH] configs: Enable CONFIG_BLK in a few TI boards
Lokesh Vutla
- [U-Boot] [PATCH v3] xyz-modem: Fix timeout loop waiting with WATCHDOG
Lokesh Vutla
- [U-Boot] [PATCH] arm: ti: boot: Fix am57xx evm fdtfile name
Lokesh Vutla
- [U-Boot] memcpy/memset on arm64 platforms
Lokesh Vutla
- [U-Boot] [PATCH v2 0/3] Introduce regulator_set_enable_if_allowed()
Lokesh Vutla
- [U-Boot] [PATCH v2 1/3] Revert "power: regulator: Return success on attempt to disable an always-on regulator"
Lokesh Vutla
- [U-Boot] [PATCH v2 2/3] power: regulator: Introduce regulator_set_enable_if_allowed api
Lokesh Vutla
- [U-Boot] [PATCH v2 3/3] mmc: omap_hsmmc: Use regulator_set_enable_if_allowed for enabling regulator
Lokesh Vutla
- [U-Boot] [PATCH v1 0/3] Enable DM USB support (host and gadget) in the USB host boot flow
Lokesh Vutla
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Stephen Warren
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Stephen Warren
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Stephen Warren
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Stephen Warren
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Stephen Warren
- [U-Boot] u-boot-dm failures in "ut dm bootcount"
Stephen Warren
- [U-Boot] Test failures in u-boot/master on NVIDIA HW with recent push
Stephen Warren
- [U-Boot] [PATCH] RFC: dfu: mmc: call fs functions instead of run_command
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: use default load address for tftp
Stephen Warren
- [U-Boot] [PATCH] dfu: mmc: call fs functions instead of run_command
Stephen Warren
- [U-Boot] [PATCH] fs: ext4: cache extent data
Stephen Warren
- [U-Boot] dfu: mmc: call fs functions instead of run_command
Stephen Warren
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Tom Warren
- [U-Boot] [PATCH v4 2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [PATCH 1/5] tools: dumpimage: Provide more feedback on error
Martyn Welch
- [U-Boot] [PATCH 2/5] tools: dumpimage: Simplify arguments
Martyn Welch
- [U-Boot] [PATCH 3/5] tools: dumpimage: Simplify internal logic
Martyn Welch
- [U-Boot] [PATCH 4/5] tools: dumpimage: Add help option and make error paths consistent
Martyn Welch
- [U-Boot] [PATCH 5/5] tools: dumpimage: Clarify help
Martyn Welch
- [U-Boot] no DTB with nand SPL on sama5d3
Ben Whitten
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Jens Wiklander
- [U-Boot] [PATCH] mkimage: fixup CONFIG_FIT_EXTERNAL_OFFSET
Patrick Wildt
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Patrick Wildt
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Patrick Wildt
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald Woods
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald Woods
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald Woods
- [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion
Derald Woods
- [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald Woods
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald D. Woods
- [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion
Derald D. Woods
- [U-Boot] [PATCH 1/2] nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC
Derald D. Woods
- [U-Boot] [PATCH 2/2] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald D. Woods
- [U-Boot] [PATCH v2 0/1] ARM: at91: NAND PMECC Kconfig conversion
Derald D. Woods
- [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald D. Woods
- [U-Boot] [PATCH v2 0/9] Add common pinctrl driver support for rockchip
David Wu
- [U-Boot] [PATCH v2 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
David Wu
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
David Wu
- [U-Boot] [PATCH v2 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
David Wu
- [U-Boot] [PATCH v2 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
David Wu
- [U-Boot] [PATCH v2 5/9] rk3288: chrome: defconfig: Enable FDT for new pinctrl driver
David Wu
- [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
David Wu
- [U-Boot] [PATCH v2 7/9] rockchip: defconfig: Clean the unused pinctrl config
David Wu
- [U-Boot] [PATCH v2 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
David Wu
- [U-Boot] [PATCH v2 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
David Wu
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
David Wu
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
David Wu
- [U-Boot] [PATCH v2 0/9] Add common pinctrl driver support for rockchip
David Wu
- [U-Boot] [PATCH 03/11] reset: MedaiTek: add reset controller driver for MediaTek SoCs
Frank Wunderlich
- [U-Boot] [PATCH v3] adding saveenv-command for bananapi r2
Frank Wunderlich
- [U-Boot] [U-Boot,v2] adding saveenv-command for bananapi r2
Frank Wunderlich
- [U-Boot] [PATCH 2/2] env: Fix saving environment to "bad CRC" location
Frank Wunderlich
- [U-Boot] [PATCH] kbuild: fix parallel build race caused by u-boot.cfg regeneration
Masahiro Yamada
- [U-Boot] [PATCH] kbuild: fix parallel build race caused by u-boot.cfg regeneration
Masahiro Yamada
- [U-Boot] [PATCH v2] kbuild: fix parallel build race caused by u-boot.cfg regeneration
Masahiro Yamada
- [U-Boot] [PATCH 1/2] kbuild: add .DELETE_ON_ERROR special target
Masahiro Yamada
- [U-Boot] [PATCH 2/2] kbuild: add .SECONDARY special target to scripts/Kbuild.include
Masahiro Yamada
- [U-Boot] [PATCH v3] moveconfig: add a second pass for empty #if/#endif blocks
Masahiro Yamada
- [U-Boot] [PATCH v3] moveconfig: add a second pass for empty #if/#endif blocks
Masahiro Yamada
- [U-Boot] [PATCH 05/18] rockchip: Add mention of other boards
Andy Yan
- [U-Boot] Booting on RK3399[Please note, mail behalf by sjg at google.com]
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now[Please note, mail behalf by 3vnmnxammciszqnjoyvtpbt.vynrlcly.fhunyvjr-jopwz.jvt at chromium-sendgmr.bounces.google.com]
Kever Yang
- [U-Boot] Booting on RK3399[Please note, mail behalf by sjg at google.com]
Kever Yang
- [U-Boot] rk3288: firefly: flashing emmc from maskrom using USB
Kever Yang
- [U-Boot] booting optee via SPL on imx6q
Kever Yang
- [U-Boot] [PATCH 2/2] Kconfig: Add u-boot.itb BUILD_TARGET for RK3368/3399
Kever Yang
- [U-Boot] TPL max size for RK3288 ?
Kever Yang
- [U-Boot] re-use dm data for pre-relocate and post-relocate[Please note, mail behalf by sjg at google.com]
Kever Yang
- [U-Boot] dfu broken on rk3288 dwc2_otg【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Kever Yang
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH v2 1/9] rockchip: rk3399-evb: defconfig: Enable FDT for new pinctrl driver
Kever Yang
- [U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Kever Yang
- [U-Boot] [PATCH v2 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
Kever Yang
- [U-Boot] [PATCH v2 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
Kever Yang
- [U-Boot] [PATCH v2 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Kever Yang
- [U-Boot] [PATCH v2 7/9] rockchip: defconfig: Clean the unused pinctrl config
Kever Yang
- [U-Boot] [PATCH v2 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Kever Yang
- [U-Boot] [PATCH v2 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
Kever Yang
- [U-Boot] [RESENT PATCH v3] rockchip: update emmc/sd index for distro boot order
Kever Yang
- [U-Boot] [PATCH 2/3] rockchip: Add TPL_MAX_SIZE for RK3288【请注意,邮件由tom.rini at gmail.com代发】
Kever Yang
- [U-Boot] [RESENT PATCH v3] rockchip: update emmc/sd index for distro boot order
Kever Yang
- [U-Boot] [PATCH v2 09/19] rockchip: evb_rk3399: Tidy up the README【请注意,邮件由3jd9gxammcg05wtpu41zv7z.14txr8r4.bn0t41px-puv25.p1z at chromium-sendgmr.bounces.google.com代发】
Kever Yang
- [U-Boot] [PATCH v2 10/19] rockchip: Clarify docs on SPI writing【请注意,邮件由3jt9gxammcg46xuqv520w80.25uys9s5.co1u52qy-qvw36.q20 at chromium-sendgmr.bounces.google.com代发】
Kever Yang
- [U-Boot] [PATCH v2 05/19] rockchip: Add mention of other boards【请注意,邮件由3hd9gxammcguxolhmwtrnzr.twlpj0jw.3fslwthp-hmnux.htr at chromium-sendgmr.bounces.google.com代发】
Kever Yang
- [U-Boot] [PATCH v2 06/19] rockchip: Drop note about supporting other SoCs【请注意,邮件由3hj9gxammcgczqnjoyvtp1t.vynrl2ly.5hunyvjr-jopwz.jvt at chromium-sendgmr.bounces.google.com代发】
Kever Yang
- [U-Boot] [PATCH] am335x: chilisom: Initial support for different DDR3 chips
Maciej Zagrabski
- [U-Boot] [RFC PATCH] am335x: Changes in DDR init procedure to Support Samsung K4B2G1646EBIH9 memory chip
Maciej Zagrabski
- [U-Boot] [PATCH v1] mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
Yinbo Zhu
- [U-Boot] [PATCH v1 1/9] colibri_imx7: fix boot commands
Marcel Ziswiler
- [U-Boot] [PATCH v1 2/9] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
Marcel Ziswiler
- [U-Boot] [PATCH v1 3/9] configs: colibri_imx7: enable DM for raw NAND devices
Marcel Ziswiler
- [U-Boot] [PATCH v1 4/9] configs: colibri_imx7: use separate device tree
Marcel Ziswiler
- [U-Boot] [PATCH v1 5/9] arm: dts: imx7: colibri: add usdhci peripherals to device tree
Marcel Ziswiler
- [U-Boot] [PATCH v1 6/9] configs: colibri_imx7: use DM_MMC
Marcel Ziswiler
- [U-Boot] [PATCH v1 7/9] colibri_imx7: drop legacy usdhc support
Marcel Ziswiler
- [U-Boot] [PATCH v1 8/9] configs: colibri_imx7: enable CAAM driver
Marcel Ziswiler
- [U-Boot] [PATCH v1 9/9] configs: add default configuraiton for Colibri iMX7 with eMMC
Marcel Ziswiler
- [U-Boot] [PATCH v1 2/9] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
Marcel Ziswiler
- [U-Boot] [PATCH 0/3] While converting SATA on Apalis iMX6 to use driver model I noticed it
Marcel Ziswiler
- [U-Boot] [PATCH 1/3] dm: device: fail uclass_find_first_device() if list_empty
Marcel Ziswiler
- [U-Boot] [PATCH 2/3] dm: sata: add null pointer check for dev
Marcel Ziswiler
- [U-Boot] [PATCH 3/3] cmd: sata: add null pointer check for dev
Marcel Ziswiler
- [U-Boot] [PATCH 1/3] dm: device: fail uclass_find_first_device() if list_empty
Marcel Ziswiler
- [U-Boot] [PATCH 2/3] dm: sata: add null pointer check for dev
Marcel Ziswiler
- [U-Boot] [PATCH v2 0/2] While converting SATA on Apalis iMX6 to use driver model I noticed it
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/2] dm: device: fail uclass_find_first_device() if list_empty
Marcel Ziswiler
- [U-Boot] [PATCH v2 2/2] cmd: sata: add null pointer check for dev
Marcel Ziswiler
- [U-Boot] [PATCH v1] Add LED driver for TI LP5562 controller
Doug Zobel
- [U-Boot] [PATCH v1] dm: led: add TI LP5562 LED driver
Doug Zobel
- [U-Boot] Proposed fastboot changes
Douglas Zobel
- [U-Boot] Proposed fastboot changes
Douglas Zobel
- [U-Boot] Pull request: u-boot-riscv/master
uboot at andestech.com
- [U-Boot] Pull request: u-boot-nds32/master
uboot at andestech.com
- [U-Boot] [PATCH 0/3] Migrate i.MX53 based cx9020 to CONFIG_DM_MMC=y
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add compatible for fsl, imx53-esdhc
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH 2/3] arm: imx: Add esdhc1/2 nodes to imx53.dtsi
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC
linux-kernel-dev at beckhoff.com
- [U-Boot] New mirror: mirror.cyberbits.eu
root at cyberbits.eu
- [U-Boot] [U-Boot, 1/3] mmc: fsl_esdhc: add compatible for fsl, imx53-esdhc
sbabic at denx.de
- [U-Boot] [U-Boot, 1/3] mx7: Do not call lcdif_power_down() in the SPL case
sbabic at denx.de
- [U-Boot] imx8: cpu: restrict checking ROM passover info for revA
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 4/8] arm: imx7s-warp: Convert to DM MMC initialization
sbabic at denx.de
- [U-Boot] [U-Boot, V2, 06/10] dts: imx8qxp-mek: introduce u-boot dtsi
sbabic at denx.de
- [U-Boot] MTD: nand: mxs_nand_spl: Fix empty function pointer for BBT
sbabic at denx.de
- [U-Boot] [U-Boot, 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC
sbabic at denx.de
- [U-Boot] [U-Boot,V2,08/10] imx: build flash.bin for i.MX8
sbabic at denx.de
- [U-Boot] [U-Boot,V2,10/10] imx8qxp: mek: update README
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 5/8] arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
sbabic at denx.de
- [U-Boot] spi: mxc_spi: Fix build warning on ARM64 platforms
sbabic at denx.de
- [U-Boot] MAINTAINERS: imx: Change Fabio's email address
sbabic at denx.de
- [U-Boot] [U-Boot, 1/1] tools: imx8image: use correct printf escape sequence
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 7/8] warp7: defconfig: Switch to DM for I2C
sbabic at denx.de
- [U-Boot] [U-Boot,V2,09/10] imx8qxp: mek: default enable SPL
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 2/8] arm: dts: imx7s-warp: Import Linux warp7 dts
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 04/11] configs: colibri_imx7: use separate device tree
sbabic at denx.de
- [U-Boot] imx: Check the PL310 version for applying errata
sbabic at denx.de
- [U-Boot] m53menlo: fix addmtd cmd in default environment
sbabic at denx.de
- [U-Boot] [U-Boot,2/3] pico-imx7d: Add LCD support
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 10/11] configs: colibri_imx7: use distro defaults
sbabic at denx.de
- [U-Boot] ARM: imx6q_logic: Enable Falcon Mode and fatwrite
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
sbabic at denx.de
- [U-Boot] [U-Boot,V2,01/10] imx8qxp: add SUPPORT_SPL option
sbabic at denx.de
- [U-Boot] [U-Boot,V2,03/10] arm: imx: build mach-imx for i.MX8
sbabic at denx.de
- [U-Boot] [U-Boot,v2,01/11] colibri_imx7: fix boot commands
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 07/11] colibri_imx7: drop legacy usdhc support
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 1/8] arm: dts: imx7: Correct spelling mistake in GPIO name
sbabic at denx.de
- [U-Boot] imx: Fix potential lmb memory overwritten by stack
sbabic at denx.de
- [U-Boot] [U-Boot,V2] imx6q_logic: Enable MMC booting from SPL
sbabic at denx.de
- [U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
sbabic at denx.de
- [U-Boot] [U-Boot,V2,05/10] spl: imx8: add spl boot device
sbabic at denx.de
- [U-Boot] [U-Boot, V2, 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
sbabic at denx.de
- [U-Boot] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition
sbabic at denx.de
- [U-Boot] [U-Boot,V2,04/10] gpio: introduce CONFIG_SPL_DM_PCA953X
sbabic at denx.de
- [U-Boot] ARM: imx6q_logic: Enable DM_USB and dependent regulators
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 03/11] configs: colibri_imx7: enable DM for raw NAND devices
sbabic at denx.de
- [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable
sbabic at denx.de
- [U-Boot] [U-Boot,v2,06/11] configs: colibri_imx7: use DM_MMC
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 6/8] warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
sbabic at denx.de
- [U-Boot] m53menlo: fix splashfile location
sbabic at denx.de
- [U-Boot] pinctrl: imx: Fix select input issue
sbabic at denx.de
- [U-Boot] imx: hab: Convert non-NULL IVT DCD pointer warning to an error
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 3/8] arm: imx7s-warp: Add DT file hooks
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 08/11] configs: colibri_imx7: enable CAAM driver
sbabic at denx.de
- [U-Boot] [U-Boot, 2/2] ARM: DTS: imx6q-logicpd: Update DTS/DTSI files
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, v3, 8/8] arm: imx7s-warp: Convert to DM PMIC
sbabic at denx.de
- [U-Boot] [U-Boot,2/3] arm: imx: Add esdhc1/2 nodes to imx53.dtsi
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 1/2] Enable FEC driver to retrieve PHY address from device tree
sbabic at denx.de
- [U-Boot] [U-Boot,V2,02/10] imx8: scu: use dedicated MU for SPL
sbabic at denx.de
- [U-Boot] Revert "tools: imx8image: set dcd_skip to true"
sbabic at denx.de
- [U-Boot] [PATCH] sandbox: Correct SDL build flags
sjg at google.com
- [U-Boot] [PATCH] buildman: Deal nicely with invalid build-status file
sjg at google.com
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
sjg at google.com
- [U-Boot] [PATCH 1/2] lib: fdtdec: fdtdec_get_addr_size_fixed remove checks
sjg at google.com
- [U-Boot] [PATCH v2 5/7] net: Fix error handling in sb_eth_raw_ofdata_to_platdata()
sjg at google.com
- [U-Boot] [PATCH v2 4/7] travis: Use buildman for building with clang
sjg at google.com
- [U-Boot] [PATCH v2 7/7] buildman: Fix tabs in GetWrapper()
sjg at google.com
- [U-Boot] [PATCH v2 3/7] buildman: Add support for building with clang
sjg at google.com
- [U-Boot] [PATCH v2 2/7] log: Check printf() arguments
sjg at google.com
- [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()
sjg at google.com
- [U-Boot] [PATCH 1/1] sandbox: i2c_emul_find() No emulators for device 'rtc at 43'
sjg at google.com
- [U-Boot] [PATCH v2 5/5] dm: serial: Tidy up header file comments
sjg at google.com
- [U-Boot] [PATCH v2 3/5] dm: serial: Adjust serial_setconfig() to use proper API
sjg at google.com
- [U-Boot] [PATCH v2 4/5] dm: serial: Adjust serial_getinfo() to use proper API
sjg at google.com
- [U-Boot] [PATCH v2 2/5] dm: serial: Adjust serial_getconfig() to use proper API
sjg at google.com
- [U-Boot] [PATCH v2 1/5] serial: Move new functions to serial.h
sjg at google.com
- [U-Boot] [PATCH] buildman: fix typo
sjg at google.com
- [U-Boot] [PATCH v2] of-platdata: improve documentation
sjg at google.com
- [U-Boot] [PATCH v3 10/10] fdt: tegra: Drop COMPAT_AMS_AS3722
sjg at google.com
- [U-Boot] [PATCH v3 09/10] fdt: samsung: Drop unused fdt_compat_id values
sjg at google.com
- [U-Boot] [PATCH v3 08/10] samsung: mmc: Drop old MMC init code
sjg at google.com
- [U-Boot] [PATCH v3 07/10] samsung: Drop board_enable_audio_codec()
sjg at google.com
- [U-Boot] [PATCH v3 06/10] spring: Update flashmap details
sjg at google.com
- [U-Boot] [PATCH v3 05/10] spring: Update sound to use max98088 codec
sjg at google.com
- [U-Boot] [PATCH v3 04/10] sound: Add a driver for max98088
sjg at google.com
- [U-Boot] [PATCH v3 03/10] exynos: Convert to use CONFIG_BLK
sjg at google.com
- [U-Boot] [PATCH v3 02/10] exynos: Drop duplicate 'model' line
sjg at google.com
- [U-Boot] [PATCH v3 01/10] Convert CONFIG_BOARD_TYPES to Kconfig
sjg at google.com
- [U-Boot] [PATCH v2 3/3] mmc: omap_hsmmc: Use regulator_set_enable_if_allowed for enabling regulator
sjg at google.com
- [U-Boot] [PATCH v2 2/3] power: regulator: Introduce regulator_set_enable_if_allowed api
sjg at google.com
- [U-Boot] [PATCH v2 6/7] buildman: Write the environment out to an 'env' file
sjg at google.com
- [U-Boot] [PATCH 04/11] sound: Allow audio codecs to be used by other SoCs
sjg at google.com
- [U-Boot] [PATCH 02/11] sound: samsung: Fix 'regiter' typo
sjg at google.com
- [U-Boot] [PATCH 03/11] sound: i2s: Tidy up a few comments
sjg at google.com
- [U-Boot] [PATCH 01/11] misc: Allow child devices
sjg at google.com
- [U-Boot] [PATCH 1/2] fs: fat: dynamically allocate memory for temporary buffer
tien.fong.chee at intel.com
- [U-Boot] [PATCH 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
tien.fong.chee at intel.com
- [U-Boot] [PATCH] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH] spl: fat/fs: Add control to build FS EXT4 in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH] spl: fat/fs: Add option to include/exclude FAT write build in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 1/4] spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 2/4] spl: fat/fs: Add option to include/exclude FAT write build in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 3/4] spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 4/4] spl: fat/fs: Add control to build FS EXT4 in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH v3] misc: fs_loader: Add support for initializing block device
tien.fong.chee at intel.com
- [U-Boot] [PATCH v4] misc: fs_loader: Add support for initializing block device
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 0/7] Add support for loading FPGA bitstream
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 5/7] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 6/7] ARM: socfpga: Synchronize the configuration for A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
tien.fong.chee at intel.com
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
jorisoffouga
- [U-Boot] Bad block present before NAND flash partition offset
Madhu koriginja
- [U-Boot] Bad block present before NAND flash partition offset
Madhu koriginja
- [U-Boot] Status of U-Boot for Intel Arria-10 development kit DK-SOC-10AS066S-A
marcel21
- [U-Boot] 2019.01 release question
weasel at meer.net
- [U-Boot] 2019.01 release question
weasel at meer.net
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Eugen.Hristev at microchip.com
- [U-Boot] no DTB with nand SPL on sama5d3
Eugen.Hristev at microchip.com
- [U-Boot] no DTB with nand SPL on sama5d3
Eugen.Hristev at microchip.com
- [U-Boot] no DTB with nand SPL on sama5d3
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Eugen.Hristev at microchip.com
- [U-Boot] no DTB with nand SPL on sama5d3
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH 1/2] mips: spi: mscc: Add fast bitbang SPI driver
Lars.Povlsen at microchip.com
- [U-Boot] [PATCH v2 1/3] mips: spi: mscc: Add fast bitbang SPI driver
Lars.Povlsen at microchip.com
- [U-Boot] Question: Embedding boot scripts
g4 at novadsp.com
- [U-Boot] Help: CONFIG_ENV_IS_IN_SPI_FLASH on AllWinner H5?
g4 at novadsp.com
- [U-Boot] Help: CONFIG_ENV_IS_IN_SPI_FLASH on AllWinner H5?
g4 at novadsp.com
- [U-Boot] [PATCH 1/3] fsl_sec: fix register layout on Layerscape architectures
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH] pci: layerscape: add option to statically allocate PCI StreamIDs
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 2/3] armv8: fsl-layerscape: fix SEC QI ICID setup
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 3/3] armv8: fsl-layerscape: avoid DT fixup warning
laurentiu.tudor at nxp.com
- [U-Boot] [RESEND 1/3] fsl_sec: fix register layout on Layerscape architectures
laurentiu.tudor at nxp.com
- [U-Boot] [RESEND 2/3] armv8: fsl-layerscape: fix SEC QI ICID setup
laurentiu.tudor at nxp.com
- [U-Boot] [RESEND 3/3] armv8: fsl-layerscape: avoid DT fixup warning
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 2/2] mmc: bring back partition init for non-DM MMC drivers
Petr Štetiar
- [U-Boot] Regression in 2019.01-rc2 for eMMC boot on mxs board?
Petr Štetiar
- [U-Boot] Two u boot environment on eMMC
Сергей Сахно
Last message date:
Thu Jan 31 23:40:36 UTC 2019
Archived on: Thu Jan 31 23:40:50 UTC 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).