[U-Boot] [PATCH 1/2] USB: musb-new: omap2430: Prep driver for Peripheral support.

Adam Ford aford173 at gmail.com
Thu Jan 17 22:22:19 UTC 2019


On Mon, Dec 17, 2018 at 2:35 PM Adam Ford <aford173 at gmail.com> wrote:
>
> The omap2430 driver only currently supports host only.  In
> preparation for supporting peripheral mode, this patch makes
> the driver support only the host by creating a ofdata_to_platdata
> function host/peripheral agnostic with a host helper version.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
>
With the merge window and the pending DM_USB requirements, is there
anything I need to do differently to this series, or it is ok as-is?

adam

> diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c
> index 32743aa72c..b6e1320538 100644
> --- a/drivers/usb/musb-new/omap2430.c
> +++ b/drivers/usb/musb-new/omap2430.c
> @@ -137,6 +137,12 @@ const struct musb_platform_ops omap2430_ops = {
>
>  #if CONFIG_IS_ENABLED(DM_USB)
>
> +static const struct udevice_id omap2430_musb_ids[] = {
> +       { .compatible = "ti,omap3-musb" },
> +       { .compatible = "ti,omap4-musb" },
> +       { }
> +};
> +
>  struct omap2430_musb_platdata {
>         void *base;
>         void *ctrl_mod_base;
> @@ -190,20 +196,6 @@ static int omap2430_musb_ofdata_to_platdata(struct udevice *dev)
>                 return -ENOENT;
>         }
>
> -#if 0 /* In a perfect world, mode would be set to OTG, mode 3 from DT */
> -       platdata->plat.mode = fdtdec_get_int(fdt, node,
> -                                                                               "mode", -1);
> -       if (platdata->plat.mode < 0) {
> -               pr_err("MUSB mode DT entry missing\n");
> -               return -ENOENT;
> -       }
> -#else /* MUSB_OTG, it doesn't work */
> -#ifdef CONFIG_USB_MUSB_HOST /* Host seems to be the only option that works */
> -       platdata->plat.mode = MUSB_HOST;
> -#else /* For that matter, MUSB_PERIPHERAL doesn't either */
> -       platdata->plat.mode = MUSB_PERIPHERAL;
> -#endif
> -#endif
>         platdata->otg_board_data.dev = dev;
>         platdata->plat.config = &platdata->musb_config;
>         platdata->plat.platform_ops = &omap2430_ops;
> @@ -211,11 +203,10 @@ static int omap2430_musb_ofdata_to_platdata(struct udevice *dev)
>         return 0;
>  }
>
> +#ifdef CONFIG_USB_MUSB_HOST
>  static int omap2430_musb_probe(struct udevice *dev)
>  {
> -#ifdef CONFIG_USB_MUSB_HOST
>         struct musb_host_data *host = dev_get_priv(dev);
> -#endif
>         struct omap2430_musb_platdata *platdata = dev_get_platdata(dev);
>         struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
>         struct omap_musb_board_data *otg_board_data;
> @@ -226,7 +217,6 @@ static int omap2430_musb_probe(struct udevice *dev)
>
>         otg_board_data = &platdata->otg_board_data;
>
> -#ifdef CONFIG_USB_MUSB_HOST
>         host->host = musb_init_controller(&platdata->plat,
>                                           (struct device *)otg_board_data,
>                                           platdata->base);
> @@ -235,11 +225,7 @@ static int omap2430_musb_probe(struct udevice *dev)
>         }
>
>         ret = musb_lowlevel_init(host);
> -#else
> -       ret = musb_register(&platdata->plat,
> -                         (struct device *)otg_board_data,
> -                         platdata->base);
> -#endif
> +
>         return ret;
>  }
>
> @@ -252,28 +238,40 @@ static int omap2430_musb_remove(struct udevice *dev)
>         return 0;
>  }
>
> -static const struct udevice_id omap2430_musb_ids[] = {
> -       { .compatible = "ti,omap3-musb" },
> -       { .compatible = "ti,omap4-musb" },
> -       { }
> -};
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +static int omap2430_musb_host_ofdata_to_platdata(struct udevice *dev)
> +{
> +       struct ti_musb_platdata *platdata = dev_get_platdata(dev);
> +       const void *fdt = gd->fdt_blob;
> +       int node = dev_of_offset(dev);
> +       int ret;
> +
> +       ret = omap2430_musb_ofdata_to_platdata(dev);
> +       if (ret) {
> +               pr_err("platdata dt parse error\n");
> +               return ret;
> +       }
> +
> +       platdata->plat.mode = MUSB_HOST;
> +
> +       return 0;
> +}
> +#endif
>
>  U_BOOT_DRIVER(omap2430_musb) = {
>         .name   = "omap2430-musb",
> -#ifdef CONFIG_USB_MUSB_HOST
>         .id             = UCLASS_USB,
> -#else
> -       .id             = UCLASS_USB_GADGET_GENERIC,
> -#endif
>         .of_match = omap2430_musb_ids,
> -       .ofdata_to_platdata = omap2430_musb_ofdata_to_platdata,
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +       .ofdata_to_platdata = omap2430_musb_host_ofdata_to_platdata,
> +#endif
>         .probe = omap2430_musb_probe,
>         .remove = omap2430_musb_remove,
> -#ifdef CONFIG_USB_MUSB_HOST
>         .ops = &musb_usb_ops,
> -#endif
>         .platdata_auto_alloc_size = sizeof(struct omap2430_musb_platdata),
>         .priv_auto_alloc_size = sizeof(struct musb_host_data),
>  };
>
> +#endif
> +
>  #endif /* CONFIG_IS_ENABLED(DM_USB) */
> --
> 2.17.1
>


More information about the U-Boot mailing list