[U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board support
Lukasz Majewski
lukma at denx.de
Tue Jan 29 23:18:33 UTC 2019
Hi Peng,
> Add i.MX8MM EVK board support.
>
> Add board and SoC dts
> Add ddr training code
> support SD/MMC/GPIO/PINCTRL/UART
>
> U-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
> Normal Boot
> Trying to boot from MMC1
>
> U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
>
> CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz
> Reset cause: POR
> Model: NXP i.MX8MM EVK board
> DRAM: 2 GiB
> MMC: FSL_SDHC: 1, FSL_SDHC: 2
> In: serial
> Out: serial
> Err: serial
> DM
You set/adjust latter in the code the fec network driver. Why it is not
found?
Could you also share the output of "dm tree" command?
I suppose/guess that this board shall support as much as possible of
the DT/DM conversions?
> Hit any key to stop autoboot: 2
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++
> arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++
> arch/arm/mach-imx/imx8m/Kconfig | 7 +
> board/freescale/imx8mm_evk/Kconfig | 12 +
> board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> board/freescale/imx8mm_evk/Makefile | 12 +
> board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++
> board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++++++++++
> board/freescale/imx8mm_evk/spl.c | 187 +++
> configs/imx8mm_evk_defconfig | 41 +
> include/configs/imx8mm_evk.h | 221 ++++ 11 files
> changed, 3399 insertions(+) create mode 100644
> arch/arm/dts/fsl-imx8mm-evk.dts create mode 100644
> arch/arm/dts/fsl-imx8mm.dtsi create mode 100644
> board/freescale/imx8mm_evk/Kconfig create mode 100644
> board/freescale/imx8mm_evk/MAINTAINERS create mode 100644
> board/freescale/imx8mm_evk/Makefile create mode 100644
> board/freescale/imx8mm_evk/imx8mm_evk.c create mode 100644
> board/freescale/imx8mm_evk/lpddr4_timing.c create mode 100644
> board/freescale/imx8mm_evk/spl.c create mode 100644
> configs/imx8mm_evk_defconfig create mode 100644
> include/configs/imx8mm_evk.h
>
> diff --git a/arch/arm/dts/fsl-imx8mm-evk.dts
> b/arch/arm/dts/fsl-imx8mm-evk.dts new file mode 100644
> index 0000000000..df409eca47
> --- /dev/null
> +++ b/arch/arm/dts/fsl-imx8mm-evk.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-imx8mm.dtsi"
> +
> +/ {
> + model = "NXP i.MX8MM EVK board";
> + compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + off-on-delay = <20000>;
> + enable-active-high;
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + imx8mm-evk {
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> +
> MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
> +
> MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> +
> MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> +
> MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> +
> MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> +
> MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> +
> MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> +
> MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> +
> MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> +
> MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> +
> MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> +
> MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> +
> MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> +
> MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
> + >;
> + };
> +
> + pinctrl_gpio_led: gpioledgrp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
> +
> MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2grpgpio {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
> +
> MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
> +
> MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
> +
> MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
> +
> MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
> +
> MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
> +
> MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
> +
> MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
> +
> MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
> +
> MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
> +
> MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
> +
> MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
> +
> MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
> +
> MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
> +
> MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
> +
> MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
> +
> MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
> +
> MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
> +
> MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
> +
> MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
> +
> MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
> +
> MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
> +
> MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
> +
> MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
> +
> MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
> +
> MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
> +
> MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
> +
> MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
> +
> MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
> +
> MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
> +
> MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
> +
> MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
> +
> MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
> +
> MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
> +
> MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
> +
> MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
> +
> MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
> +
> MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
> +
> MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
> +
> MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
> + >;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
> +
> MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
> +
> MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
> +
> MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
> +
> MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
> +
> MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
> +
> MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
> +
> MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
> +
> MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
> +
> MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
> +
> MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> +
> MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> + };
> +};
> +
> +&uart2 { /* console */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-imx8mm.dtsi
> b/arch/arm/dts/fsl-imx8mm.dtsi new file mode 100644
> index 0000000000..8a808f856d
> --- /dev/null
> +++ b/arch/arm/dts/fsl-imx8mm.dtsi
> @@ -0,0 +1,586 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2017-2019 NXP
> + */
> +
> +#include <dt-bindings/clock/imx8mm-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/pins-imx8mm.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + compatible = "fsl,imx8mm";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + i2c0 = &i2c1;
> + i2c1 = &i2c2;
> + i2c2 = &i2c3;
> + i2c3 = &i2c4;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + serial3 = &uart4;
> + spi0 = &ecspi1;
> + spi1 = &ecspi2;
> + spi2 = &ecspi3;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + mmc2 = &usdhc3;
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + gpio3 = &gpio4;
> + gpio4 = &gpio5;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + A53_0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&A53_L2>;
> + };
> +
> + A53_1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&A53_L2>;
> + };
> +
> + A53_2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&A53_L2>;
> + };
> +
> + A53_3: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&A53_L2>;
> + };
> +
> + A53_L2: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0 0x80000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + osc_32k: clock at 0 {
> + compatible = "fixed-clock";
> + reg = <0>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc_32k";
> + };
> +
> + osc_24m: clock at 1 {
> + compatible = "fixed-clock";
> + reg = <1>;
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "osc_24m";
> + };
> +
> + clk_ext1: clock at 2 {
> + compatible = "fixed-clock";
> + reg = <3>;
> + #clock-cells = <0>;
> + clock-frequency = <133000000>;
> + clock-output-names = "clk_ext1";
> + };
> +
> + clk_ext2: clock at 3 {
> + compatible = "fixed-clock";
> + reg = <4>;
> + #clock-cells = <0>;
> + clock-frequency = <133000000>;
> + clock-output-names = "clk_ext2";
> + };
> +
> + clk_ext3: clock at 4 {
> + compatible = "fixed-clock";
> + reg = <5>;
> + #clock-cells = <0>;
> + clock-frequency = <133000000>;
> + clock-output-names = "clk_ext3";
> + };
> +
> + clk_ext4: clock at 5 {
> + compatible = "fixed-clock";
> + reg = <6>;
> + #clock-cells = <0>;
> + clock-frequency= <133000000>;
> + clock-output-names = "clk_ext4";
> + };
> + };
> +
> + gic: interrupt-controller at 38800000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
> + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base +
> SGI_base) */
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7
> + (GIC_CPU_MASK_SIMPLE(6) |
> IRQ_TYPE_LEVEL_HIGH)>;
> + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>,
> <&A53_3>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) |
> IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) |
> IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) |
> IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) |
> IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
> + clock-frequency = <8000000>;
> + arm,no-tick-in-suspend;
> + };
> +
> + soc at 0 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + aips1: bus at 30000000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x30000000 0x0 0x400000>;
> + ranges;
> +
> + gpio1: gpio at 30200000 {
> + compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> + reg = <0x0 0x30200000 0x0 0x10000>;
> + interrupts = <GIC_SPI 64
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 65
> IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio at 30210000 {
> + compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> + reg = <0x0 0x30210000 0x0 0x10000>;
> + interrupts = <GIC_SPI 66
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 67
> IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio at 30220000 {
> + compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> + reg = <0x0 0x30220000 0x0 0x10000>;
> + interrupts = <GIC_SPI 68
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 69
> IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio4: gpio at 30230000 {
> + compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> + reg = <0x0 0x30230000 0x0 0x10000>;
> + interrupts = <GIC_SPI 70
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 71
> IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio5: gpio at 30240000 {
> + compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> + reg = <0x0 0x30240000 0x0 0x10000>;
> + interrupts = <GIC_SPI 72
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73
> IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + wdog1: wdog at 30280000 {
> + compatible = "fsl,imx21-wdt";
> + reg = <0 0x30280000 0 0x10000>;
> + interrupts = <GIC_SPI 78
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_WDOG1_ROOT>;
> + status = "disabled";
> + };
> +
> + wdog2: wdog at 30290000 {
> + compatible = "fsl,imx21-wdt";
> + reg = <0 0x30290000 0 0x10000>;
> + interrupts = <GIC_SPI 79
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_WDOG2_ROOT>;
> + status = "disabled";
> + };
> +
> + wdog3: wdog at 302a0000 {
> + compatible = "fsl,imx21-wdt";
> + reg = <0 0x302a0000 0 0x10000>;
> + interrupts = <GIC_SPI 10
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_WDOG3_ROOT>;
> + status = "disabled";
> + };
> +
> + sdma2: dma-controller at 302c0000 {
> + compatible = "fsl,imx8mq-sdma",
> "fsl,imx7d-sdma";
> + reg = <0x0 0x302c0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 103
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_SDMA2_ROOT>,
> + <&clk
> IMX8MM_CLK_SDMA2_ROOT>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx7d.bin";
> + fsl,ratio-1-1;
> + status = "okay";
> + };
> +
> + sdma3: dma-controller at 302b0000 {
> + compatible = "fsl,imx8mq-sdma",
> "fsl,imx7d-sdma";
> + reg = <0x0 0x302b0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_SDMA3_ROOT>,
> + <&clk IMX8MM_CLK_SDMA3_ROOT>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx7d.bin";
> + fsl,ratio-1-1;
> + status = "okay";
> + };
> +
> + iomuxc: pinctrl at 30330000 {
> + compatible = "fsl,imx8mm-iomuxc";
> + reg = <0x0 0x30330000 0x0 0x10000>;
> + };
> +
> + gpr: iomuxc-gpr at 30340000 {
> + compatible =
> "fsl,imx8mm-iomuxc-gpr", "syscon";
> + reg = <0x0 0x30340000 0x0 0x10000>;
> + };
> +
> + ocotp: ocotp-ctrl at 30350000 {
> + compatible = "fsl,imx8mq-ocotp",
> "fsl,imx7d-ocotp", "syscon";
> + reg = <0 0x30350000 0 0x10000>;
> + clocks = <&clk
> IMX8MM_CLK_OCOTP_ROOT>;
> + /* For nvmem subnodes */
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + anatop: anatop at 30360000 {
> + compatible = "fsl,imx8mm-anatop",
> "syscon", "simple-bus";
> + reg = <0x0 0x30360000 0x0 0x10000>;
> + };
> +
> + snvs: snvs at 30370000 {
> + compatible =
> "fsl,sec-v4.0-mon","syscon", "simple-mfd";
> + reg = <0x0 0x30370000 0x0 0x10000>;
> +
> + snvs_rtc: snvs-rtc-lp{
> + compatible =
> "fsl,sec-v4.0-mon-rtc-lp";
> + regmap =<&snvs>;
> + offset = <0x34>;
> + interrupts = <GIC_SPI 19
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 20
> IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + snvs_pwrkey: snvs-powerkey {
> + compatible =
> "fsl,sec-v4.0-pwrkey";
> + regmap = <&snvs>;
> + interrupts = <GIC_SPI 4
> IRQ_TYPE_LEVEL_HIGH>;
> + linux,keycode = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + clk: clock-controller at 30380000 {
> + compatible = "fsl,imx8mm-ccm";
> + reg = <0x0 0x30380000 0x0 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&osc_32k>, <&osc_24m>,
> <&clk_ext1>, <&clk_ext2>,
> + <&clk_ext3>, <&clk_ext4>;
> + clock-names = "osc_32k", "osc_24m",
> "clk_ext1", "clk_ext2",
> + "clk_ext3", "clk_ext4";
> + };
> +
> + src: src at 30390000 {
> + compatible = "fsl,imx8mm-src",
> "syscon";
> + reg = <0x0 0x30390000 0x0 0x10000>;
> + interrupts = <GIC_SPI 89
> IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> + };
> +
> + gpc: gpc at 303a0000 {
> + compatible = "fsl,imx8mm-gpc",
> "syscon";
> + reg = <0x0 0x303a0000 0x0 0x10000>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 87
> IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <3>;
> + };
> + };
> +
> + aips2: bus at 30400000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x30400000 0x0 0x400000>;
> + ranges;
> +
> + pwm1: pwm at 30660000 {
> + compatible = "fsl,imx8mm-pwm",
> "fsl,imx27-pwm";
> + reg = <0x0 0x30660000 0x0 0x10000>;
> + interrupts = <GIC_SPI 81
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
> + <&clk IMX8MM_CLK_PWM1_ROOT>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm at 30670000 {
> + compatible = "fsl,imx8mm-pwm",
> "fsl,imx27-pwm";
> + reg = <0x0 0x30670000 0x0 0x10000>;
> + interrupts = <GIC_SPI 82
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
> + <&clk IMX8MM_CLK_PWM2_ROOT>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + status = "disabled";
> + };
> +
> + pwm3: pwm at 30680000 {
> + compatible = "fsl,imx8mm-pwm",
> "fsl,imx27-pwm";
> + reg = <0x0 0x30680000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
> + <&clk IMX8MM_CLK_PWM3_ROOT>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + status = "disabled";
> + };
> +
> + pwm4: pwm at 30690000 {
> + compatible = "fsl,imx8mm-pwm",
> "fsl,imx27-pwm";
> + reg = <0x0 0x30690000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
> + <&clk IMX8MM_CLK_PWM4_ROOT>;
> + clock-names = "ipg", "per";
> + #pwm-cells = <2>;
> + status = "disabled";
> + };
> + };
> +
> + aips3: bus at 30800000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x30800000 0x0 0x400000>;
> + ranges;
> +
> + ecspi1: ecspi at 30820000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-ecspi",
> "fsl,imx51-ecspi";
> + reg = <0x0 0x30820000 0x0 0x10000>;
> + interrupts = <GIC_SPI 31
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_ECSPI1_ROOT>,
> + <&clk
> IMX8MM_CLK_ECSPI1_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ecspi2: ecspi at 30830000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-ecspi",
> "fsl,imx51-ecspi";
> + reg = <0x0 0x30830000 0x0 0x10000>;
> + interrupts = <GIC_SPI 32
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_ECSPI2_ROOT>,
> + <&clk
> IMX8MM_CLK_ECSPI2_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + ecspi3: ecspi at 30840000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-ecspi",
> "fsl,imx51-ecspi";
> + reg = <0x0 0x30840000 0x0 0x10000>;
> + interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_ECSPI3_ROOT>,
> + <&clk
> IMX8MM_CLK_ECSPI3_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart1: serial at 30860000 {
> + compatible = "fsl,imx8mm-uart",
> + "fsl,imx6q-uart",
> "fsl,imx21-uart";
> + reg = <0x0 0x30860000 0x0 0x10000>;
> + interrupts = <GIC_SPI 26
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_UART1_ROOT>,
> + <&clk
> IMX8MM_CLK_UART1_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart3: serial at 30880000 {
> + compatible = "fsl,imx8mm-uart",
> + "fsl,imx6q-uart",
> "fsl,imx21-uart";
> + reg = <0x0 0x30880000 0x0 0x10000>;
> + interrupts = <GIC_SPI 28
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_UART3_ROOT>,
> + <&clk
> IMX8MM_CLK_UART3_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + uart2: serial at 30890000 {
> + compatible = "fsl,imx8mm-uart",
> + "fsl,imx6q-uart",
> "fsl,imx21-uart";
> + reg = <0x0 0x30890000 0x0 0x10000>;
> + interrupts = <GIC_SPI 27
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_UART2_ROOT>,
> + <&clk
> IMX8MM_CLK_UART2_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + i2c1: i2c at 30a20000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-i2c",
> "fsl,imx21-i2c";
> + reg = <0x0 0x30a20000 0x0 0x10000>;
> + interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at 30a30000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-i2c",
> "fsl,imx21-i2c";
> + reg = <0x0 0x30a30000 0x0 0x10000>;
> + interrupts = <GIC_SPI 36
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at 30a40000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-i2c",
> "fsl,imx21-i2c";
> + reg = <0x0 0x30a40000 0x0 0x10000>;
> + interrupts = <GIC_SPI 37
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at 30a50000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mm-i2c",
> "fsl,imx21-i2c";
> + reg = <0x0 0x30a50000 0x0 0x10000>;
> + interrupts = <GIC_SPI 38
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
> + status = "disabled";
> + };
> +
> + uart4: serial at 30a60000 {
> + compatible = "fsl,imx8mq-uart",
> + "fsl,imx6q-uart",
> "fsl,imx21-uart";
> + reg = <0x0 0x30a60000 0x0 0x10000>;
> + interrupts = <GIC_SPI 29
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk
> IMX8MM_CLK_UART4_ROOT>,
> + <&clk
> IMX8MM_CLK_UART4_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + usdhc1: mmc at 30b40000 {
> + compatible = "fsl,imx8mq-usdhc",
> "fsl,imx7d-usdhc";
> + reg = <0x0 0x30b40000 0x0 0x10000>;
> + interrupts = <GIC_SPI 22
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_DUMMY>,
> + <&clk
> IMX8MM_CLK_NAND_USDHC_BUS>,
> + <&clk
> IMX8MM_CLK_USDHC1_ROOT>;
> + clock-names = "ipg", "ahb", "per";
> + assigned-clocks = <&clk
> IMX8MM_CLK_USDHC1>;
> + assigned-clock-rates = <400000000>;
> + fsl,tuning-start-tap = <20>;
> + fsl,tuning-step= <2>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + usdhc2: mmc at 30b50000 {
> + compatible = "fsl,imx8mq-usdhc",
> "fsl,imx7d-usdhc";
> + reg = <0x0 0x30b50000 0x0 0x10000>;
> + interrupts = <GIC_SPI 23
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_DUMMY>,
> + <&clk
> IMX8MM_CLK_NAND_USDHC_BUS>,
> + <&clk
> IMX8MM_CLK_USDHC2_ROOT>;
> + clock-names = "ipg", "ahb", "per";
> + fsl,tuning-start-tap = <20>;
> + fsl,tuning-step= <2>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + usdhc3: mmc at 30b60000 {
> + compatible = "fsl,imx8mq-usdhc",
> "fsl,imx7d-usdhc";
> + reg = <0x0 0x30b60000 0x0 0x10000>;
> + interrupts = <GIC_SPI 24
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_DUMMY>,
> + <&clk
> IMX8MM_CLK_NAND_USDHC_BUS>,
> + <&clk
> IMX8MM_CLK_USDHC3_ROOT>;
> + clock-names = "ipg", "ahb", "per";
> + assigned-clocks = <&clk
> IMX8MM_CLK_USDHC3_ROOT>;
> + assigned-clock-rates = <400000000>;
> + fsl,tuning-start-tap = <20>;
> + fsl,tuning-step= <2>;
> + bus-width = <4>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/mach-imx/imx8m/Kconfig
> b/arch/arm/mach-imx/imx8m/Kconfig index 35c978e863..f520075875 100644
> --- a/arch/arm/mach-imx/imx8m/Kconfig
> +++ b/arch/arm/mach-imx/imx8m/Kconfig
> @@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK
> select IMX8MQ
> select IMX8M_LPDDR4
>
> +config TARGET_IMX8MM_EVK
> + bool "imx8mm LPDDR4 EVK board"
> + select IMX8MM
> + select SUPPORT_SPL
> + select IMX8M_LPDDR4
Here you shall put the select DM_{UART,USDHC, etc}
> +
> endchoice
>
> source "board/freescale/imx8mq_evk/Kconfig"
> +source "board/freescale/imx8mm_evk/Kconfig"
>
> endif
> diff --git a/board/freescale/imx8mm_evk/Kconfig
> b/board/freescale/imx8mm_evk/Kconfig new file mode 100644
> index 0000000000..299691a619
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_IMX8MM_EVK
> +
> +config SYS_BOARD
> + default "imx8mm_evk"
> +
> +config SYS_VENDOR
> + default "freescale"
> +
> +config SYS_CONFIG_NAME
> + default "imx8mm_evk"
> +
> +endif
> diff --git a/board/freescale/imx8mm_evk/MAINTAINERS
> b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644
> index 0000000000..b031bb0674
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/MAINTAINERS
> @@ -0,0 +1,6 @@
> +i.MX8MM EVK BOARD
> +M: Peng Fan <peng.fan at nxp.com>
> +S: Maintained
> +F: board/freescale/imx8mm_evk/
> +F: include/configs/imx8mm_evk.h
> +F: configs/imx8mm_evk_defconfig
> diff --git a/board/freescale/imx8mm_evk/Makefile
> b/board/freescale/imx8mm_evk/Makefile new file mode 100644
> index 0000000000..1db7b62caf
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/Makefile
> @@ -0,0 +1,12 @@
> +#
> +# Copyright 2018 NXP
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += imx8mm_evk.o
> +
> +ifdef CONFIG_SPL_BUILD
> +obj-y += spl.o
> +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
> +endif
> diff --git a/board/freescale/imx8mm_evk/imx8mm_evk.c
> b/board/freescale/imx8mm_evk/imx8mm_evk.c new file mode 100644
> index 0000000000..a681aca04d
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/imx8mm_evk.c
> @@ -0,0 +1,144 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm-generic/gpio.h>
> +#include <fsl_esdhc.h>
> +#include <mmc.h>
> +#include <asm/arch/imx8mm_pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/mach-imx/gpio.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <asm/arch/clock.h>
> +#include <spl.h>
> +#include <asm/mach-imx/dma.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
> +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
> PAD_CTL_PUE | PAD_CTL_PE) +
> +static iomux_v3_cfg_t const uart_pads[] = {
> + IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const wdog_pads[] = {
> + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
> MUX_PAD_CTRL(WDOG_PAD_CTRL), +};
> +
> +int board_early_init_f(void)
> +{
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> +
> + imx_iomux_v3_setup_multiple_pads(wdog_pads,
> ARRAY_SIZE(wdog_pads)); +
> + set_wdog_reset(wdog);
> +
> + imx_iomux_v3_setup_multiple_pads(uart_pads,
> ARRAY_SIZE(uart_pads)); +
> + return 0;
> +}
> +
> +#ifdef CONFIG_BOARD_POSTCLK_INIT
> +int board_postclk_init(void)
> +{
> + /* TODO */
> + return 0;
> +}
> +#endif
> +
> +int dram_init(void)
> +{
> + /* rom_pointer[1] contains the size of TEE occupies */
> + if (rom_pointer[1])
> + gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
> + else
> + gd->ram_size = PHYS_SDRAM_SIZE;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +int ft_board_setup(void *blob, bd_t *bd)
^^^ - fdt_board_setup ?
> +{
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_FEC_MXC
> +#define FEC_RST_PAD IMX_GPIO_NR(4, 22)
> +static iomux_v3_cfg_t const fec1_rst_pads[] = {
> + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
This shall be done with fsl_fec.c DM driver - there is support for
adding reset pin (to dts).
> +};
> +
> +static void setup_iomux_fec(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
> + ARRAY_SIZE(fec1_rst_pads));
> +
> + gpio_request(FEC_RST_PAD, "fec1_rst");
> + gpio_direction_output(FEC_RST_PAD, 0);
> + udelay(500);
> + gpio_direction_output(FEC_RST_PAD, 1);
> +}
This shall be replaced with DM/DTS of the fsl_fec.c driver. Please also
note that there are (at least on imx6q) some timing issues when we move
the code to DM/DTS (some delay is needed).
> +
> +static int setup_fec(void)
> +{
> + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
> + = (struct iomuxc_gpr_base_regs
> *)IOMUXC_GPR_BASE_ADDR; +
> + setup_iomux_fec();
> +
> + /* Use 125M anatop REF_CLK1 for ENET1, not from external */
> + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
> + IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT,
> 0);
> + return set_clk_enet(ENET_125MHZ);
> +}
> +
> +int board_phy_config(struct phy_device *phydev)
> +{
> + /* enable rgmii rxc skew and phy mode select to RGMII copper
> */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
> +
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
> +
> + if (phydev->drv->config)
> + phydev->drv->config(phydev);
> + return 0;
Which PHY do you use? E.g. KSZ... support passing those values via DTS.
> +}
> +#endif
> +
> +int board_init(void)
> +{
> +#ifdef CONFIG_FEC_MXC
> + setup_fec();
> +#endif
> + return 0;
> +}
> +
> +int board_mmc_get_env_dev(int devno)
> +{
> + return devno - 1;
> +}
> +
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> + env_set("board_name", "EVK");
> + env_set("board_rev", "iMX8MM");
> +#endif
> + return 0;
> +}
> diff --git a/board/freescale/imx8mm_evk/lpddr4_timing.c
> b/board/freescale/imx8mm_evk/lpddr4_timing.c new file mode 100644
> index 0000000000..4bade5bf74
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/lpddr4_timing.c
> @@ -0,0 +1,1980 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
Author is missing.
> + */
> +
> +#include <linux/kernel.h>
> +#include <common.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/lpddr4_define.h>
> +
> +struct dram_cfg_param lpddr4_ddrc_cfg[] = {
> + /* Start to config, default 3200mbps */
> + { DDRC_DBG1(0), 0x00000001 },
> + { DDRC_PWRCTL(0), 0x00000001 },
> + { DDRC_MSTR(0), 0xa1080020 },
> + { DDRC_RFSHTMG(0), 0x005b00d2 },
> + { DDRC_INIT0(0), 0xC003061B },
> + { DDRC_INIT1(0), 0x009D0000 },
> + { DDRC_INIT3(0), 0x00D4002D },
> + { DDRC_INIT4(0), (LPDDR4_MR3 << 16) | 0x0000 },
> + { DDRC_INIT6(0), 0x0066004a },
> + { DDRC_INIT7(0), 0x0006004a },
> +
> + { DDRC_DRAMTMG0(0), 0x1A201B22 },
> + { DDRC_DRAMTMG1(0), 0x00060633 },
> + { DDRC_DRAMTMG3(0), 0x00C0C000 },
> + { DDRC_DRAMTMG4(0), 0x0F04080F },
> + { DDRC_DRAMTMG5(0), 0x02040C0C },
> + { DDRC_DRAMTMG6(0), 0x01010007 },
> + { DDRC_DRAMTMG7(0), 0x00000401 },
> + { DDRC_DRAMTMG12(0), 0x00020600 },
> + { DDRC_DRAMTMG13(0), 0x0C100002 },
> + { DDRC_DRAMTMG14(0), 0x000000E6 },
> + { DDRC_DRAMTMG17(0), 0x00A00050 },
> +
> + { DDRC_ZQCTL0(0), 0x03200018 },
> + { DDRC_ZQCTL1(0), 0x028061A8 },
> + { DDRC_ZQCTL2(0), 0x00000000 },
> +
> + { DDRC_DFITMG0(0), 0x0497820A },
> + { DDRC_DFITMG2(0), 0x0000170A },
> + { DDRC_DRAMTMG2(0), 0x070E171a },
> + { DDRC_DBICTL(0), 0x00000001 },
> +
> + { DDRC_DFITMG1(0), 0x00080303 },
> + { DDRC_DFIUPD0(0), 0xE0400018 },
> + { DDRC_DFIUPD1(0), 0x00DF00E4 },
> + { DDRC_DFIUPD2(0), 0x80000000 },
> + { DDRC_DFIMISC(0), 0x00000011 },
> +
> + { DDRC_DFIPHYMSTR(0), 0x00000000 },
> + { DDRC_RANKCTL(0), 0x00000c99 },
> +
> + /* address mapping */
> + { DDRC_ADDRMAP0(0), 0x0000001f },
> + { DDRC_ADDRMAP1(0), 0x00080808 },
> + { DDRC_ADDRMAP2(0), 0x00000000 },
> + { DDRC_ADDRMAP3(0), 0x00000000 },
> + { DDRC_ADDRMAP4(0), 0x00001f1f },
> + { DDRC_ADDRMAP5(0), 0x07070707 },
> + { DDRC_ADDRMAP6(0), 0x07070707 },
> + { DDRC_ADDRMAP7(0), 0x00000f0f },
> +
> + /* performance setting */
> + { DDRC_SCHED(0), 0x29001701 },
> + { DDRC_SCHED1(0), 0x0000002c },
> + { DDRC_PERFHPR1(0), 0x04000030 },
> + { DDRC_PERFLPR1(0), 0x900093e7 },
> + { DDRC_PERFWR1(0), 0x20005574 },
> + { DDRC_PCCFG(0), 0x00000111 },
> + { DDRC_PCFGW_0(0), 0x000072ff },
> + { DDRC_PCFGQOS0_0(0), 0x02100e07 },
> + { DDRC_PCFGQOS1_0(0), 0x00620096 },
> + { DDRC_PCFGWQOS0_0(0), 0x01100e07 },
> + { DDRC_PCFGWQOS1_0(0), 0x00c8012c },
> +
> + /* frequency P1&P2 */
> + /* Frequency 1: 400mbps */
> + { DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c },
> + { DDRC_FREQ1_DRAMTMG1(0), 0x00030410 },
> + { DDRC_FREQ1_DRAMTMG2(0), 0x0203090c },
> + { DDRC_FREQ1_DRAMTMG3(0), 0x00505006 },
> + { DDRC_FREQ1_DRAMTMG4(0), 0x05040305 },
> + { DDRC_FREQ1_DRAMTMG5(0), 0x0d0e0504 },
> + { DDRC_FREQ1_DRAMTMG6(0), 0x0a060004 },
> + { DDRC_FREQ1_DRAMTMG7(0), 0x0000090e },
> + { DDRC_FREQ1_DRAMTMG14(0), 0x00000032 },
> + { DDRC_FREQ1_DRAMTMG15(0), 0x00000000 },
> + { DDRC_FREQ1_DRAMTMG17(0), 0x0036001b },
> + { DDRC_FREQ1_DERATEINT(0), 0x7e9fbeb1 },
> + { DDRC_FREQ1_DFITMG0(0), 0x03818200 },
> + { DDRC_FREQ1_DFITMG2(0), 0x00000000 },
> + { DDRC_FREQ1_RFSHTMG(0), 0x000C001c },
> + { DDRC_FREQ1_INIT3(0), 0x00840000 },
> + { DDRC_FREQ1_INIT4(0), 0x00310000 },
> + { DDRC_FREQ1_INIT6(0), 0x0066004a },
> + { DDRC_FREQ1_INIT7(0), 0x0006004a },
> +
> + /* Frequency 2: 100mbps */
> + { DDRC_FREQ2_DRAMTMG0(0), 0x0d0b010c },
> + { DDRC_FREQ2_DRAMTMG1(0), 0x00030410 },
> + { DDRC_FREQ2_DRAMTMG2(0), 0x0203090c },
> + { DDRC_FREQ2_DRAMTMG3(0), 0x00505006 },
> + { DDRC_FREQ2_DRAMTMG4(0), 0x05040305 },
> + { DDRC_FREQ2_DRAMTMG5(0), 0x0d0e0504 },
> + { DDRC_FREQ2_DRAMTMG6(0), 0x0a060004 },
> + { DDRC_FREQ2_DRAMTMG7(0), 0x0000090e },
> + { DDRC_FREQ2_DRAMTMG14(0), 0x00000032 },
> + { DDRC_FREQ2_DRAMTMG17(0), 0x0036001b },
> + { DDRC_FREQ2_DERATEINT(0), 0x7e9fbeb1 },
> + { DDRC_FREQ2_DFITMG0(0), 0x03818200 },
> + { DDRC_FREQ2_DFITMG2(0), 0x00000000 },
> + { DDRC_FREQ2_RFSHTMG(0), 0x0003800c },
> + { DDRC_FREQ2_RFSHTMG(0), 0x00030007 },
> + { DDRC_FREQ2_INIT3(0), 0x00840000 },
> + { DDRC_FREQ2_INIT4(0), 0x00310008 },
> + { DDRC_FREQ2_INIT4(0), (LPDDR4_MR3 << 16) | 0x0000 },
> + { DDRC_FREQ2_INIT6(0), 0x0066004a },
> + { DDRC_FREQ2_INIT7(0), 0x0006004a },
> +
> + /* boot start point */
> + { DDRC_MSTR2(0), 0x2 }, //DDRC_MSTR2
> +};
> +
> +/* PHY Initialize Configuration */
> +struct dram_cfg_param lpddr4_ddrphy_cfg[] = {
> + { 0x1005f, 0x1ff },
> + { 0x1015f, 0x1ff },
> + { 0x1105f, 0x1ff },
> + { 0x1115f, 0x1ff },
> + { 0x1205f, 0x1ff },
> + { 0x1215f, 0x1ff },
> + { 0x1305f, 0x1ff },
> + { 0x1315f, 0x1ff },
> +
> + { 0x11005f, 0x1ff },
> + { 0x11015f, 0x1ff },
> + { 0x11105f, 0x1ff },
> + { 0x11115f, 0x1ff },
> + { 0x11205f, 0x1ff },
> + { 0x11215f, 0x1ff },
> + { 0x11305f, 0x1ff },
> + { 0x11315f, 0x1ff },
> +
> + { 0x21005f, 0x1ff },
> + { 0x21015f, 0x1ff },
> + { 0x21105f, 0x1ff },
> + { 0x21115f, 0x1ff },
> + { 0x21205f, 0x1ff },
> + { 0x21215f, 0x1ff },
> + { 0x21305f, 0x1ff },
> + { 0x21315f, 0x1ff },
> +
> + { 0x55, 0x1ff },
> + { 0x1055, 0x1ff },
> + { 0x2055, 0x1ff },
> + { 0x3055, 0x1ff },
> + { 0x4055, 0x1ff },
> + { 0x5055, 0x1ff },
> + { 0x6055, 0x1ff },
> + { 0x7055, 0x1ff },
> + { 0x8055, 0x1ff },
> + { 0x9055, 0x1ff },
> +
> + { 0x200c5, 0x19 },
> + { 0x1200c5, 0x7 },
> + { 0x2200c5, 0x7 },
> +
> + { 0x2002e, 0x2 },
> + { 0x12002e, 0x2 },
> + { 0x22002e, 0x2 },
> +
> + { 0x90204, 0x0 },
> + { 0x190204, 0x0 },
> + { 0x290204, 0x0 },
> +
> + { 0x20024, 0xab },
> + { 0x2003a, 0x0 },
> +
> + { 0x120024, 0xab },
> + { 0x2003a, 0x0 },
> +
> + { 0x220024, 0xab },
> + { 0x2003a, 0x0 },
> +
> + { 0x20056, 0x3 },
> + { 0x120056, 0xa },
> + { 0x220056, 0xa },
> +
> + { 0x1004d, 0xe00 },
> + { 0x1014d, 0xe00 },
> + { 0x1104d, 0xe00 },
> + { 0x1114d, 0xe00 },
> + { 0x1204d, 0xe00 },
> + { 0x1214d, 0xe00 },
> + { 0x1304d, 0xe00 },
> + { 0x1314d, 0xe00 },
> +
> + { 0x11004d, 0xe00 },
> + { 0x11014d, 0xe00 },
> + { 0x11104d, 0xe00 },
> + { 0x11114d, 0xe00 },
> + { 0x11204d, 0xe00 },
> + { 0x11214d, 0xe00 },
> + { 0x11304d, 0xe00 },
> + { 0x11314d, 0xe00 },
> +
> + { 0x21004d, 0xe00 },
> + { 0x21014d, 0xe00 },
> + { 0x21104d, 0xe00 },
> + { 0x21114d, 0xe00 },
> + { 0x21204d, 0xe00 },
> + { 0x21214d, 0xe00 },
> + { 0x21304d, 0xe00 },
> + { 0x21314d, 0xe00 },
> +
> + { 0x10049, 0xfbe },
> + { 0x10149, 0xfbe },
> + { 0x11049, 0xfbe },
> + { 0x11149, 0xfbe },
> + { 0x12049, 0xfbe },
> + { 0x12149, 0xfbe },
> + { 0x13049, 0xfbe },
> + { 0x13149, 0xfbe },
> +
> + { 0x110049, 0xfbe },
> + { 0x110149, 0xfbe },
> + { 0x111049, 0xfbe },
> + { 0x111149, 0xfbe },
> + { 0x112049, 0xfbe },
> + { 0x112149, 0xfbe },
> + { 0x113049, 0xfbe },
> + { 0x113149, 0xfbe },
> +
> + { 0x210049, 0xfbe },
> + { 0x210149, 0xfbe },
> + { 0x211049, 0xfbe },
> + { 0x211149, 0xfbe },
> + { 0x212049, 0xfbe },
> + { 0x212149, 0xfbe },
> + { 0x213049, 0xfbe },
> + { 0x213149, 0xfbe },
> +
> + { 0x43, 0x63 },
> + { 0x1043, 0x63 },
> + { 0x2043, 0x63 },
> + { 0x3043, 0x63 },
> + { 0x4043, 0x63 },
> + { 0x5043, 0x63 },
> + { 0x6043, 0x63 },
> + { 0x7043, 0x63 },
> + { 0x8043, 0x63 },
> + { 0x9043, 0x63 },
> +
> + { 0x20018, 0x3 },
> + { 0x20075, 0x4 },
> + { 0x20050, 0x0 },
> + { 0x20008, 0x2ee },
> + { 0x120008, 0x64 },
> + { 0x220008, 0x19 },
> + { 0x20088, 0x9 },
> +
> + { 0x200b2, 0x1d4 },
> + { 0x10043, 0x5a1 },
> + { 0x10143, 0x5a1 },
> + { 0x11043, 0x5a1 },
> + { 0x11143, 0x5a1 },
> + { 0x12043, 0x5a1 },
> + { 0x12143, 0x5a1 },
> + { 0x13043, 0x5a1 },
> + { 0x13143, 0x5a1 },
> +
> + { 0x1200b2, 0xdc },
> + { 0x110043, 0x5a1 },
> + { 0x110143, 0x5a1 },
> + { 0x111043, 0x5a1 },
> + { 0x111143, 0x5a1 },
> + { 0x112043, 0x5a1 },
> + { 0x112143, 0x5a1 },
> + { 0x113043, 0x5a1 },
> + { 0x113143, 0x5a1 },
> +
> + { 0x2200b2, 0xdc },
> + { 0x210043, 0x5a1 },
> + { 0x210143, 0x5a1 },
> + { 0x211043, 0x5a1 },
> + { 0x211143, 0x5a1 },
> + { 0x212043, 0x5a1 },
> + { 0x212143, 0x5a1 },
> + { 0x213043, 0x5a1 },
> + { 0x213143, 0x5a1 },
> +
> + { 0x200fa, 0x1 },
> + { 0x1200fa, 0x1 },
> + { 0x2200fa, 0x1 },
> +
> + { 0x20019, 0x1 },
> + { 0x120019, 0x1 },
> + { 0x220019, 0x1 },
> +
> + { 0x200f0, 0x660 },
> + { 0x200f1, 0x0 },
> + { 0x200f2, 0x4444 },
> + { 0x200f3, 0x8888 },
> + { 0x200f4, 0x5665 },
> + { 0x200f5, 0x0 },
> + { 0x200f6, 0x0 },
> + { 0x200f7, 0xf000 },
> +
> + { 0x20025, 0x0 },
> + { 0x2002d, LPDDR4_PHY_DMIPinPresent },
> + { 0x12002d, LPDDR4_PHY_DMIPinPresent },
> + { 0x22002d, LPDDR4_PHY_DMIPinPresent },
> + { 0x200c7, 0x21 },
> + { 0x200ca, 0x24 },
> + { 0x1200c7, 0x21 },
> + { 0x1200ca, 0x24 },
> + { 0x2200c7, 0x21 },
> + { 0x2200ca, 0x24 },
Why do you add tuple - offset and value? Shouldn't we have the
DDR training functions here?
It is possible to train IMX6Q and Vybrid's DDR3 (as fair as I know).
Would it be also possible to add the DDR4 training code for IMX8?
> +};
> +
> +/* ddr phy trained csr */
> +struct dram_cfg_param lpddr4_ddrphy_trained_csr[] = {
> + { 0x200b2, 0x0 },
> + { 0x1200b2, 0x0 },
> + { 0x2200b2, 0x0 },
> + { 0x200cb, 0x0 },
> + { 0x10043, 0x0 },
> + { 0x110043, 0x0 },
> + { 0x210043, 0x0 },
> + { 0x10143, 0x0 },
> + { 0x110143, 0x0 },
> + { 0x210143, 0x0 },
> + { 0x11043, 0x0 },
> + { 0x111043, 0x0 },
> + { 0x211043, 0x0 },
> + { 0x11143, 0x0 },
> + { 0x111143, 0x0 },
> + { 0x211143, 0x0 },
> + { 0x12043, 0x0 },
> + { 0x112043, 0x0 },
> + { 0x212043, 0x0 },
> + { 0x12143, 0x0 },
> + { 0x112143, 0x0 },
> + { 0x212143, 0x0 },
> + { 0x13043, 0x0 },
> + { 0x113043, 0x0 },
> + { 0x213043, 0x0 },
> + { 0x13143, 0x0 },
> + { 0x113143, 0x0 },
> + { 0x213143, 0x0 },
> + { 0x80, 0x0 },
> + { 0x100080, 0x0 },
> + { 0x200080, 0x0 },
> + { 0x1080, 0x0 },
> + { 0x101080, 0x0 },
> + { 0x201080, 0x0 },
> + { 0x2080, 0x0 },
> + { 0x102080, 0x0 },
> + { 0x202080, 0x0 },
> + { 0x3080, 0x0 },
> + { 0x103080, 0x0 },
> + { 0x203080, 0x0 },
> + { 0x4080, 0x0 },
> + { 0x104080, 0x0 },
> + { 0x204080, 0x0 },
> + { 0x5080, 0x0 },
> + { 0x105080, 0x0 },
> + { 0x205080, 0x0 },
> + { 0x6080, 0x0 },
> + { 0x106080, 0x0 },
> + { 0x206080, 0x0 },
> + { 0x7080, 0x0 },
> + { 0x107080, 0x0 },
> + { 0x207080, 0x0 },
> + { 0x8080, 0x0 },
> + { 0x108080, 0x0 },
> + { 0x208080, 0x0 },
> + { 0x9080, 0x0 },
> + { 0x109080, 0x0 },
> + { 0x209080, 0x0 },
> + { 0x10080, 0x0 },
> + { 0x110080, 0x0 },
> + { 0x210080, 0x0 },
> + { 0x10180, 0x0 },
> + { 0x110180, 0x0 },
> + { 0x210180, 0x0 },
> + { 0x11080, 0x0 },
> + { 0x111080, 0x0 },
> + { 0x211080, 0x0 },
> + { 0x11180, 0x0 },
> + { 0x111180, 0x0 },
> + { 0x211180, 0x0 },
> + { 0x12080, 0x0 },
> + { 0x112080, 0x0 },
> + { 0x212080, 0x0 },
> + { 0x12180, 0x0 },
> + { 0x112180, 0x0 },
> + { 0x212180, 0x0 },
> + { 0x13080, 0x0 },
> + { 0x113080, 0x0 },
> + { 0x213080, 0x0 },
> + { 0x13180, 0x0 },
> + { 0x113180, 0x0 },
> + { 0x213180, 0x0 },
> + { 0x10081, 0x0 },
> + { 0x110081, 0x0 },
> + { 0x210081, 0x0 },
> + { 0x10181, 0x0 },
> + { 0x110181, 0x0 },
> + { 0x210181, 0x0 },
> + { 0x11081, 0x0 },
> + { 0x111081, 0x0 },
> + { 0x211081, 0x0 },
> + { 0x11181, 0x0 },
> + { 0x111181, 0x0 },
> + { 0x211181, 0x0 },
> + { 0x12081, 0x0 },
> + { 0x112081, 0x0 },
> + { 0x212081, 0x0 },
> + { 0x12181, 0x0 },
> + { 0x112181, 0x0 },
> + { 0x212181, 0x0 },
> + { 0x13081, 0x0 },
> + { 0x113081, 0x0 },
> + { 0x213081, 0x0 },
> + { 0x13181, 0x0 },
> + { 0x113181, 0x0 },
> + { 0x213181, 0x0 },
> + { 0x100d0, 0x0 },
> + { 0x1100d0, 0x0 },
> + { 0x2100d0, 0x0 },
> + { 0x101d0, 0x0 },
> + { 0x1101d0, 0x0 },
> + { 0x2101d0, 0x0 },
> + { 0x110d0, 0x0 },
> + { 0x1110d0, 0x0 },
> + { 0x2110d0, 0x0 },
> + { 0x111d0, 0x0 },
> + { 0x1111d0, 0x0 },
> + { 0x2111d0, 0x0 },
> + { 0x120d0, 0x0 },
> + { 0x1120d0, 0x0 },
> + { 0x2120d0, 0x0 },
> + { 0x121d0, 0x0 },
> + { 0x1121d0, 0x0 },
> + { 0x2121d0, 0x0 },
> + { 0x130d0, 0x0 },
> + { 0x1130d0, 0x0 },
> + { 0x2130d0, 0x0 },
> + { 0x131d0, 0x0 },
> + { 0x1131d0, 0x0 },
> + { 0x2131d0, 0x0 },
> + { 0x100d1, 0x0 },
> + { 0x1100d1, 0x0 },
> + { 0x2100d1, 0x0 },
> + { 0x101d1, 0x0 },
> + { 0x1101d1, 0x0 },
> + { 0x2101d1, 0x0 },
> + { 0x110d1, 0x0 },
> + { 0x1110d1, 0x0 },
> + { 0x2110d1, 0x0 },
> + { 0x111d1, 0x0 },
> + { 0x1111d1, 0x0 },
> + { 0x2111d1, 0x0 },
> + { 0x120d1, 0x0 },
> + { 0x1120d1, 0x0 },
> + { 0x2120d1, 0x0 },
> + { 0x121d1, 0x0 },
> + { 0x1121d1, 0x0 },
> + { 0x2121d1, 0x0 },
> + { 0x130d1, 0x0 },
> + { 0x1130d1, 0x0 },
> + { 0x2130d1, 0x0 },
> + { 0x131d1, 0x0 },
> + { 0x1131d1, 0x0 },
> + { 0x2131d1, 0x0 },
> + { 0x10068, 0x0 },
> + { 0x10168, 0x0 },
> + { 0x10268, 0x0 },
> + { 0x10368, 0x0 },
> + { 0x10468, 0x0 },
> + { 0x10568, 0x0 },
> + { 0x10668, 0x0 },
> + { 0x10768, 0x0 },
> + { 0x10868, 0x0 },
> + { 0x11068, 0x0 },
> + { 0x11168, 0x0 },
> + { 0x11268, 0x0 },
> + { 0x11368, 0x0 },
> + { 0x11468, 0x0 },
> + { 0x11568, 0x0 },
> + { 0x11668, 0x0 },
> + { 0x11768, 0x0 },
> + { 0x11868, 0x0 },
> + { 0x12068, 0x0 },
> + { 0x12168, 0x0 },
> + { 0x12268, 0x0 },
> + { 0x12368, 0x0 },
> + { 0x12468, 0x0 },
> + { 0x12568, 0x0 },
> + { 0x12668, 0x0 },
> + { 0x12768, 0x0 },
> + { 0x12868, 0x0 },
> + { 0x13068, 0x0 },
> + { 0x13168, 0x0 },
> + { 0x13268, 0x0 },
> + { 0x13368, 0x0 },
> + { 0x13468, 0x0 },
> + { 0x13568, 0x0 },
> + { 0x13668, 0x0 },
> + { 0x13768, 0x0 },
> + { 0x13868, 0x0 },
> + { 0x10069, 0x0 },
> + { 0x10169, 0x0 },
> + { 0x10269, 0x0 },
> + { 0x10369, 0x0 },
> + { 0x10469, 0x0 },
> + { 0x10569, 0x0 },
> + { 0x10669, 0x0 },
> + { 0x10769, 0x0 },
> + { 0x10869, 0x0 },
> + { 0x11069, 0x0 },
> + { 0x11169, 0x0 },
> + { 0x11269, 0x0 },
> + { 0x11369, 0x0 },
> + { 0x11469, 0x0 },
> + { 0x11569, 0x0 },
> + { 0x11669, 0x0 },
> + { 0x11769, 0x0 },
> + { 0x11869, 0x0 },
> + { 0x12069, 0x0 },
> + { 0x12169, 0x0 },
> + { 0x12269, 0x0 },
> + { 0x12369, 0x0 },
> + { 0x12469, 0x0 },
> + { 0x12569, 0x0 },
> + { 0x12669, 0x0 },
> + { 0x12769, 0x0 },
> + { 0x12869, 0x0 },
> + { 0x13069, 0x0 },
> + { 0x13169, 0x0 },
> + { 0x13269, 0x0 },
> + { 0x13369, 0x0 },
> + { 0x13469, 0x0 },
> + { 0x13569, 0x0 },
> + { 0x13669, 0x0 },
> + { 0x13769, 0x0 },
> + { 0x13869, 0x0 },
> + { 0x1008c, 0x0 },
> + { 0x11008c, 0x0 },
> + { 0x21008c, 0x0 },
> + { 0x1018c, 0x0 },
> + { 0x11018c, 0x0 },
> + { 0x21018c, 0x0 },
> + { 0x1108c, 0x0 },
> + { 0x11108c, 0x0 },
> + { 0x21108c, 0x0 },
> + { 0x1118c, 0x0 },
> + { 0x11118c, 0x0 },
> + { 0x21118c, 0x0 },
> + { 0x1208c, 0x0 },
> + { 0x11208c, 0x0 },
> + { 0x21208c, 0x0 },
> + { 0x1218c, 0x0 },
> + { 0x11218c, 0x0 },
> + { 0x21218c, 0x0 },
> + { 0x1308c, 0x0 },
> + { 0x11308c, 0x0 },
> + { 0x21308c, 0x0 },
> + { 0x1318c, 0x0 },
> + { 0x11318c, 0x0 },
> + { 0x21318c, 0x0 },
> + { 0x1008d, 0x0 },
> + { 0x11008d, 0x0 },
> + { 0x21008d, 0x0 },
> + { 0x1018d, 0x0 },
> + { 0x11018d, 0x0 },
> + { 0x21018d, 0x0 },
> + { 0x1108d, 0x0 },
> + { 0x11108d, 0x0 },
> + { 0x21108d, 0x0 },
> + { 0x1118d, 0x0 },
> + { 0x11118d, 0x0 },
> + { 0x21118d, 0x0 },
> + { 0x1208d, 0x0 },
> + { 0x11208d, 0x0 },
> + { 0x21208d, 0x0 },
> + { 0x1218d, 0x0 },
> + { 0x11218d, 0x0 },
> + { 0x21218d, 0x0 },
> + { 0x1308d, 0x0 },
> + { 0x11308d, 0x0 },
> + { 0x21308d, 0x0 },
> + { 0x1318d, 0x0 },
> + { 0x11318d, 0x0 },
> + { 0x21318d, 0x0 },
> + { 0x100c0, 0x0 },
> + { 0x1100c0, 0x0 },
> + { 0x2100c0, 0x0 },
> + { 0x101c0, 0x0 },
> + { 0x1101c0, 0x0 },
> + { 0x2101c0, 0x0 },
> + { 0x102c0, 0x0 },
> + { 0x1102c0, 0x0 },
> + { 0x2102c0, 0x0 },
> + { 0x103c0, 0x0 },
> + { 0x1103c0, 0x0 },
> + { 0x2103c0, 0x0 },
> + { 0x104c0, 0x0 },
> + { 0x1104c0, 0x0 },
> + { 0x2104c0, 0x0 },
> + { 0x105c0, 0x0 },
> + { 0x1105c0, 0x0 },
> + { 0x2105c0, 0x0 },
> + { 0x106c0, 0x0 },
> + { 0x1106c0, 0x0 },
> + { 0x2106c0, 0x0 },
> + { 0x107c0, 0x0 },
> + { 0x1107c0, 0x0 },
> + { 0x2107c0, 0x0 },
> + { 0x108c0, 0x0 },
> + { 0x1108c0, 0x0 },
> + { 0x2108c0, 0x0 },
> + { 0x110c0, 0x0 },
> + { 0x1110c0, 0x0 },
> + { 0x2110c0, 0x0 },
> + { 0x111c0, 0x0 },
> + { 0x1111c0, 0x0 },
> + { 0x2111c0, 0x0 },
> + { 0x112c0, 0x0 },
> + { 0x1112c0, 0x0 },
> + { 0x2112c0, 0x0 },
> + { 0x113c0, 0x0 },
> + { 0x1113c0, 0x0 },
> + { 0x2113c0, 0x0 },
> + { 0x114c0, 0x0 },
> + { 0x1114c0, 0x0 },
> + { 0x2114c0, 0x0 },
> + { 0x115c0, 0x0 },
> + { 0x1115c0, 0x0 },
> + { 0x2115c0, 0x0 },
> + { 0x116c0, 0x0 },
> + { 0x1116c0, 0x0 },
> + { 0x2116c0, 0x0 },
> + { 0x117c0, 0x0 },
> + { 0x1117c0, 0x0 },
> + { 0x2117c0, 0x0 },
> + { 0x118c0, 0x0 },
> + { 0x1118c0, 0x0 },
> + { 0x2118c0, 0x0 },
> + { 0x120c0, 0x0 },
> + { 0x1120c0, 0x0 },
> + { 0x2120c0, 0x0 },
> + { 0x121c0, 0x0 },
> + { 0x1121c0, 0x0 },
> + { 0x2121c0, 0x0 },
> + { 0x122c0, 0x0 },
> + { 0x1122c0, 0x0 },
> + { 0x2122c0, 0x0 },
> + { 0x123c0, 0x0 },
> + { 0x1123c0, 0x0 },
> + { 0x2123c0, 0x0 },
> + { 0x124c0, 0x0 },
> + { 0x1124c0, 0x0 },
> + { 0x2124c0, 0x0 },
> + { 0x125c0, 0x0 },
> + { 0x1125c0, 0x0 },
> + { 0x2125c0, 0x0 },
> + { 0x126c0, 0x0 },
> + { 0x1126c0, 0x0 },
> + { 0x2126c0, 0x0 },
> + { 0x127c0, 0x0 },
> + { 0x1127c0, 0x0 },
> + { 0x2127c0, 0x0 },
> + { 0x128c0, 0x0 },
> + { 0x1128c0, 0x0 },
> + { 0x2128c0, 0x0 },
> + { 0x130c0, 0x0 },
> + { 0x1130c0, 0x0 },
> + { 0x2130c0, 0x0 },
> + { 0x131c0, 0x0 },
> + { 0x1131c0, 0x0 },
> + { 0x2131c0, 0x0 },
> + { 0x132c0, 0x0 },
> + { 0x1132c0, 0x0 },
> + { 0x2132c0, 0x0 },
> + { 0x133c0, 0x0 },
> + { 0x1133c0, 0x0 },
> + { 0x2133c0, 0x0 },
> + { 0x134c0, 0x0 },
> + { 0x1134c0, 0x0 },
> + { 0x2134c0, 0x0 },
> + { 0x135c0, 0x0 },
> + { 0x1135c0, 0x0 },
> + { 0x2135c0, 0x0 },
> + { 0x136c0, 0x0 },
> + { 0x1136c0, 0x0 },
> + { 0x2136c0, 0x0 },
> + { 0x137c0, 0x0 },
> + { 0x1137c0, 0x0 },
> + { 0x2137c0, 0x0 },
> + { 0x138c0, 0x0 },
> + { 0x1138c0, 0x0 },
> + { 0x2138c0, 0x0 },
> + { 0x100c1, 0x0 },
> + { 0x1100c1, 0x0 },
> + { 0x2100c1, 0x0 },
> + { 0x101c1, 0x0 },
> + { 0x1101c1, 0x0 },
> + { 0x2101c1, 0x0 },
> + { 0x102c1, 0x0 },
> + { 0x1102c1, 0x0 },
> + { 0x2102c1, 0x0 },
> + { 0x103c1, 0x0 },
> + { 0x1103c1, 0x0 },
> + { 0x2103c1, 0x0 },
> + { 0x104c1, 0x0 },
> + { 0x1104c1, 0x0 },
> + { 0x2104c1, 0x0 },
> + { 0x105c1, 0x0 },
> + { 0x1105c1, 0x0 },
> + { 0x2105c1, 0x0 },
> + { 0x106c1, 0x0 },
> + { 0x1106c1, 0x0 },
> + { 0x2106c1, 0x0 },
> + { 0x107c1, 0x0 },
> + { 0x1107c1, 0x0 },
> + { 0x2107c1, 0x0 },
> + { 0x108c1, 0x0 },
> + { 0x1108c1, 0x0 },
> + { 0x2108c1, 0x0 },
> + { 0x110c1, 0x0 },
> + { 0x1110c1, 0x0 },
> + { 0x2110c1, 0x0 },
> + { 0x111c1, 0x0 },
> + { 0x1111c1, 0x0 },
> + { 0x2111c1, 0x0 },
> + { 0x112c1, 0x0 },
> + { 0x1112c1, 0x0 },
> + { 0x2112c1, 0x0 },
> + { 0x113c1, 0x0 },
> + { 0x1113c1, 0x0 },
> + { 0x2113c1, 0x0 },
> + { 0x114c1, 0x0 },
> + { 0x1114c1, 0x0 },
> + { 0x2114c1, 0x0 },
> + { 0x115c1, 0x0 },
> + { 0x1115c1, 0x0 },
> + { 0x2115c1, 0x0 },
> + { 0x116c1, 0x0 },
> + { 0x1116c1, 0x0 },
> + { 0x2116c1, 0x0 },
> + { 0x117c1, 0x0 },
> + { 0x1117c1, 0x0 },
> + { 0x2117c1, 0x0 },
> + { 0x118c1, 0x0 },
> + { 0x1118c1, 0x0 },
> + { 0x2118c1, 0x0 },
> + { 0x120c1, 0x0 },
> + { 0x1120c1, 0x0 },
> + { 0x2120c1, 0x0 },
> + { 0x121c1, 0x0 },
> + { 0x1121c1, 0x0 },
> + { 0x2121c1, 0x0 },
> + { 0x122c1, 0x0 },
> + { 0x1122c1, 0x0 },
> + { 0x2122c1, 0x0 },
> + { 0x123c1, 0x0 },
> + { 0x1123c1, 0x0 },
> + { 0x2123c1, 0x0 },
> + { 0x124c1, 0x0 },
> + { 0x1124c1, 0x0 },
> + { 0x2124c1, 0x0 },
> + { 0x125c1, 0x0 },
> + { 0x1125c1, 0x0 },
> + { 0x2125c1, 0x0 },
> + { 0x126c1, 0x0 },
> + { 0x1126c1, 0x0 },
> + { 0x2126c1, 0x0 },
> + { 0x127c1, 0x0 },
> + { 0x1127c1, 0x0 },
> + { 0x2127c1, 0x0 },
> + { 0x128c1, 0x0 },
> + { 0x1128c1, 0x0 },
> + { 0x2128c1, 0x0 },
> + { 0x130c1, 0x0 },
> + { 0x1130c1, 0x0 },
> + { 0x2130c1, 0x0 },
> + { 0x131c1, 0x0 },
> + { 0x1131c1, 0x0 },
> + { 0x2131c1, 0x0 },
> + { 0x132c1, 0x0 },
> + { 0x1132c1, 0x0 },
> + { 0x2132c1, 0x0 },
> + { 0x133c1, 0x0 },
> + { 0x1133c1, 0x0 },
> + { 0x2133c1, 0x0 },
> + { 0x134c1, 0x0 },
> + { 0x1134c1, 0x0 },
> + { 0x2134c1, 0x0 },
> + { 0x135c1, 0x0 },
> + { 0x1135c1, 0x0 },
> + { 0x2135c1, 0x0 },
> + { 0x136c1, 0x0 },
> + { 0x1136c1, 0x0 },
> + { 0x2136c1, 0x0 },
> + { 0x137c1, 0x0 },
> + { 0x1137c1, 0x0 },
> + { 0x2137c1, 0x0 },
> + { 0x138c1, 0x0 },
> + { 0x1138c1, 0x0 },
> + { 0x2138c1, 0x0 },
> + { 0x10020, 0x0 },
> + { 0x110020, 0x0 },
> + { 0x210020, 0x0 },
> + { 0x11020, 0x0 },
> + { 0x111020, 0x0 },
> + { 0x211020, 0x0 },
> + { 0x12020, 0x0 },
> + { 0x112020, 0x0 },
> + { 0x212020, 0x0 },
> + { 0x13020, 0x0 },
> + { 0x113020, 0x0 },
> + { 0x213020, 0x0 },
> + { 0x20072, 0x0 },
> + { 0x20073, 0x0 },
> + { 0x20074, 0x0 },
> + { 0x100aa, 0x0 },
> + { 0x110aa, 0x0 },
> + { 0x120aa, 0x0 },
> + { 0x130aa, 0x0 },
> + { 0x20010, 0x0 },
> + { 0x120010, 0x0 },
> + { 0x220010, 0x0 },
> + { 0x20011, 0x0 },
> + { 0x120011, 0x0 },
> + { 0x220011, 0x0 },
> + { 0x100ae, 0x0 },
> + { 0x1100ae, 0x0 },
> + { 0x2100ae, 0x0 },
> + { 0x100af, 0x0 },
> + { 0x1100af, 0x0 },
> + { 0x2100af, 0x0 },
> + { 0x110ae, 0x0 },
> + { 0x1110ae, 0x0 },
> + { 0x2110ae, 0x0 },
> + { 0x110af, 0x0 },
> + { 0x1110af, 0x0 },
> + { 0x2110af, 0x0 },
> + { 0x120ae, 0x0 },
> + { 0x1120ae, 0x0 },
> + { 0x2120ae, 0x0 },
> + { 0x120af, 0x0 },
> + { 0x1120af, 0x0 },
> + { 0x2120af, 0x0 },
> + { 0x130ae, 0x0 },
> + { 0x1130ae, 0x0 },
> + { 0x2130ae, 0x0 },
> + { 0x130af, 0x0 },
> + { 0x1130af, 0x0 },
> + { 0x2130af, 0x0 },
> + { 0x20020, 0x0 },
> + { 0x120020, 0x0 },
> + { 0x220020, 0x0 },
> + { 0x100a0, 0x0 },
> + { 0x100a1, 0x0 },
> + { 0x100a2, 0x0 },
> + { 0x100a3, 0x0 },
> + { 0x100a4, 0x0 },
> + { 0x100a5, 0x0 },
> + { 0x100a6, 0x0 },
> + { 0x100a7, 0x0 },
> + { 0x110a0, 0x0 },
> + { 0x110a1, 0x0 },
> + { 0x110a2, 0x0 },
> + { 0x110a3, 0x0 },
> + { 0x110a4, 0x0 },
> + { 0x110a5, 0x0 },
> + { 0x110a6, 0x0 },
> + { 0x110a7, 0x0 },
> + { 0x120a0, 0x0 },
> + { 0x120a1, 0x0 },
> + { 0x120a2, 0x0 },
> + { 0x120a3, 0x0 },
> + { 0x120a4, 0x0 },
> + { 0x120a5, 0x0 },
> + { 0x120a6, 0x0 },
> + { 0x120a7, 0x0 },
> + { 0x130a0, 0x0 },
> + { 0x130a1, 0x0 },
> + { 0x130a2, 0x0 },
> + { 0x130a3, 0x0 },
> + { 0x130a4, 0x0 },
> + { 0x130a5, 0x0 },
> + { 0x130a6, 0x0 },
> + { 0x130a7, 0x0 },
> + { 0x2007c, 0x0 },
> + { 0x12007c, 0x0 },
> + { 0x22007c, 0x0 },
> + { 0x2007d, 0x0 },
> + { 0x12007d, 0x0 },
> + { 0x22007d, 0x0 },
> + { 0x400fd, 0x0 },
> + { 0x400c0, 0x0 },
> + { 0x90201, 0x0 },
> + { 0x190201, 0x0 },
> + { 0x290201, 0x0 },
> + { 0x90202, 0x0 },
> + { 0x190202, 0x0 },
> + { 0x290202, 0x0 },
> + { 0x90203, 0x0 },
> + { 0x190203, 0x0 },
> + { 0x290203, 0x0 },
> + { 0x90204, 0x0 },
> + { 0x190204, 0x0 },
> + { 0x290204, 0x0 },
> + { 0x90205, 0x0 },
> + { 0x190205, 0x0 },
> + { 0x290205, 0x0 },
> + { 0x90206, 0x0 },
> + { 0x190206, 0x0 },
> + { 0x290206, 0x0 },
> + { 0x90207, 0x0 },
> + { 0x190207, 0x0 },
> + { 0x290207, 0x0 },
> + { 0x90208, 0x0 },
> + { 0x190208, 0x0 },
> + { 0x290208, 0x0 },
> + { 0x10062, 0x0 },
> + { 0x10162, 0x0 },
> + { 0x10262, 0x0 },
> + { 0x10362, 0x0 },
> + { 0x10462, 0x0 },
> + { 0x10562, 0x0 },
> + { 0x10662, 0x0 },
> + { 0x10762, 0x0 },
> + { 0x10862, 0x0 },
> + { 0x11062, 0x0 },
> + { 0x11162, 0x0 },
> + { 0x11262, 0x0 },
> + { 0x11362, 0x0 },
> + { 0x11462, 0x0 },
> + { 0x11562, 0x0 },
> + { 0x11662, 0x0 },
> + { 0x11762, 0x0 },
> + { 0x11862, 0x0 },
> + { 0x12062, 0x0 },
> + { 0x12162, 0x0 },
> + { 0x12262, 0x0 },
> + { 0x12362, 0x0 },
> + { 0x12462, 0x0 },
> + { 0x12562, 0x0 },
> + { 0x12662, 0x0 },
> + { 0x12762, 0x0 },
> + { 0x12862, 0x0 },
> + { 0x13062, 0x0 },
> + { 0x13162, 0x0 },
> + { 0x13262, 0x0 },
> + { 0x13362, 0x0 },
> + { 0x13462, 0x0 },
> + { 0x13562, 0x0 },
> + { 0x13662, 0x0 },
> + { 0x13762, 0x0 },
> + { 0x13862, 0x0 },
> + { 0x20077, 0x0 },
> + { 0x10001, 0x0 },
> + { 0x11001, 0x0 },
> + { 0x12001, 0x0 },
> + { 0x13001, 0x0 },
> + { 0x10040, 0x0 },
> + { 0x10140, 0x0 },
> + { 0x10240, 0x0 },
> + { 0x10340, 0x0 },
> + { 0x10440, 0x0 },
> + { 0x10540, 0x0 },
> + { 0x10640, 0x0 },
> + { 0x10740, 0x0 },
> + { 0x10840, 0x0 },
> + { 0x10030, 0x0 },
> + { 0x10130, 0x0 },
> + { 0x10230, 0x0 },
> + { 0x10330, 0x0 },
> + { 0x10430, 0x0 },
> + { 0x10530, 0x0 },
> + { 0x10630, 0x0 },
> + { 0x10730, 0x0 },
> + { 0x10830, 0x0 },
> + { 0x11040, 0x0 },
> + { 0x11140, 0x0 },
> + { 0x11240, 0x0 },
> + { 0x11340, 0x0 },
> + { 0x11440, 0x0 },
> + { 0x11540, 0x0 },
> + { 0x11640, 0x0 },
> + { 0x11740, 0x0 },
> + { 0x11840, 0x0 },
> + { 0x11030, 0x0 },
> + { 0x11130, 0x0 },
> + { 0x11230, 0x0 },
> + { 0x11330, 0x0 },
> + { 0x11430, 0x0 },
> + { 0x11530, 0x0 },
> + { 0x11630, 0x0 },
> + { 0x11730, 0x0 },
> + { 0x11830, 0x0 },
> + { 0x12040, 0x0 },
> + { 0x12140, 0x0 },
> + { 0x12240, 0x0 },
> + { 0x12340, 0x0 },
> + { 0x12440, 0x0 },
> + { 0x12540, 0x0 },
> + { 0x12640, 0x0 },
> + { 0x12740, 0x0 },
> + { 0x12840, 0x0 },
> + { 0x12030, 0x0 },
> + { 0x12130, 0x0 },
> + { 0x12230, 0x0 },
> + { 0x12330, 0x0 },
> + { 0x12430, 0x0 },
> + { 0x12530, 0x0 },
> + { 0x12630, 0x0 },
> + { 0x12730, 0x0 },
> + { 0x12830, 0x0 },
> + { 0x13040, 0x0 },
> + { 0x13140, 0x0 },
> + { 0x13240, 0x0 },
> + { 0x13340, 0x0 },
> + { 0x13440, 0x0 },
> + { 0x13540, 0x0 },
> + { 0x13640, 0x0 },
> + { 0x13740, 0x0 },
> + { 0x13840, 0x0 },
> + { 0x13030, 0x0 },
> + { 0x13130, 0x0 },
> + { 0x13230, 0x0 },
> + { 0x13330, 0x0 },
> + { 0x13430, 0x0 },
> + { 0x13530, 0x0 },
> + { 0x13630, 0x0 },
> + { 0x13730, 0x0 },
> + { 0x13830, 0x0 },
> +};
The same as above. Please look into imx6q DDR3 training code.
> +
> +/* P0 message block paremeter for training firmware */
> +struct dram_cfg_param lpddr4_fsp0_cfg[] = {
> + { 0xd0000, 0x0 },
> + { 0x54000, 0x0 },
> + { 0x54001, 0x0 },
> + { 0x54002, 0x0 },
> + { 0x54003, 0xbb8 },
> + { 0x54004, 0x2 },
> + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY
> Ron/Rtt
> + { 0x54006, LPDDR4_PHY_VREF_VALUE },
> + { 0x54007, 0x0 },
> + { 0x54008, 0x131f },
> + { 0x54009, 0xc8 },
> + { 0x5400a, 0x0 },
> + { 0x5400b, 0x2 },
> + { 0x5400c, 0x0 },
> + { 0x5400d, 0x0 },
> + { 0x5400e, 0x0 },
> + { 0x5400f, 0x0 },
> + { 0x54010, 0x0 },
> + { 0x54011, 0x0 },
> + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
> + { 0x54013, 0x0 },
> + { 0x54014, 0x0 },
> + { 0x54015, 0x0 },
> + { 0x54016, 0x0 },
> + { 0x54017, 0x0 },
> + { 0x54018, 0x0 },
> + { 0x54019, 0x2dd4 },
> + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x5401b, 0x4d66 },
> + { 0x5401c, 0x4d08 },
> + { 0x5401d, 0x0 },
> + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
> + { 0x5401f, 0x2dd4 },
> + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x54021, 0x4d66 },
> + { 0x54022, 0x4d08 },
> + { 0x54023, 0x0 },
> + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
> + { 0x54025, 0x0 },
> + { 0x54026, 0x0 },
> + { 0x54027, 0x0 },
> + { 0x54028, 0x0 },
> + { 0x54029, 0x0 },
> + { 0x5402a, 0x0 },
> + { 0x5402b, 0x1000 },
> + { 0x5402c, LPDDR4_CS },
> + { 0x5402d, 0x0 },
> + { 0x5402e, 0x0 },
> + { 0x5402f, 0x0 },
> + { 0x54030, 0x0 },
> + { 0x54031, 0x0 },
> + { 0x54032, 0xd400 },
> + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
> + { 0x54034, 0x6600 },
> + { 0x54035, 0x84d },
> + { 0x54036, 0x4d },
> + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
> + { 0x54038, 0xd400 },
> + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
> + { 0x5403a, 0x6600 },
> + { 0x5403b, 0x84d },
> + { 0x5403c, 0x4d },
> + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
> + { 0x5403e, 0x0 },
> + { 0x5403f, 0x0 },
> + { 0x54040, 0x0 },
> + { 0x54041, 0x0 },
> + { 0x54042, 0x0 },
> + { 0x54043, 0x0 },
> + { 0x54044, 0x0 },
> + { 0xd0000, 0x1 },
> +};
> +
> +/* P1 message block paremeter for training firmware */
> +struct dram_cfg_param lpddr4_fsp1_cfg[] = {
> + { 0xd0000, 0x0 },
> + { 0x54000, 0x0 },
> + { 0x54001, 0x0 },
> + { 0x54002, 0x101 },
> + { 0x54003, 0x190 },
> + { 0x54004, 0x2 },
> + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY
> Ron/Rtt
> + { 0x54006, LPDDR4_PHY_VREF_VALUE },
> + { 0x54007, 0x0 },
> + { 0x54008, 0x121f },
> + { 0x54009, 0xc8 },
> + { 0x5400a, 0x0 },
> + { 0x5400b, 0x2 },
> + { 0x5400c, 0x0 },
> + { 0x5400d, 0x0 },
> + { 0x5400e, 0x0 },
> + { 0x5400f, 0x0 },
> + { 0x54010, 0x0 },
> + { 0x54011, 0x0 },
> + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
> + { 0x54013, 0x0 },
> + { 0x54014, 0x0 },
> + { 0x54015, 0x0 },
> + { 0x54016, 0x0 },
> + { 0x54017, 0x0 },
> + { 0x54018, 0x0 },
> + { 0x54019, 0x84 },
> + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x5401b, 0x4d66 },
> + { 0x5401c, 0x4d08 },
> + { 0x5401d, 0x0 },
> + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
> + { 0x5401f, 0x84 },
> + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x54021, 0x4d66 },
> + { 0x54022, 0x4d08 },
> + { 0x54023, 0x0 },
> + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
> + { 0x54025, 0x0 },
> + { 0x54026, 0x0 },
> + { 0x54027, 0x0 },
> + { 0x54028, 0x0 },
> + { 0x54029, 0x0 },
> + { 0x5402a, 0x0 },
> + { 0x5402b, 0x1000 },
> + { 0x5402c, LPDDR4_CS },
> + { 0x5402d, 0x0 },
> + { 0x5402e, 0x0 },
> + { 0x5402f, 0x0 },
> + { 0x54030, 0x0 },
> + { 0x54031, 0x0 },
> + { 0x54032, 0x8400 },
> + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
> + { 0x54034, 0x6600 },
> + { 0x54035, 0x84d },
> + { 0x54036, 0x4d },
> + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
> + { 0x54038, 0x8400 },
> + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
> + { 0x5403a, 0x6600 },
> + { 0x5403b, 0x84d },
> + { 0x5403c, 0x4d },
> + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
> + { 0x5403e, 0x0 },
> + { 0x5403f, 0x0 },
> + { 0x54040, 0x0 },
> + { 0x54041, 0x0 },
> + { 0x54042, 0x0 },
> + { 0x54043, 0x0 },
> + { 0x54044, 0x0 },
> + { 0xd0000, 0x1 },
> +};
> +
> +/* P1 message block paremeter for training firmware */
> +struct dram_cfg_param lpddr4_fsp2_cfg[] = {
> + { 0xd0000, 0x0 },
> + { 0x54000, 0x0 },
> + { 0x54001, 0x0 },
> + { 0x54002, 0x102 },
> + { 0x54003, 0x64 },
> + { 0x54004, 0x2 },
> + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY
> Ron/Rtt
> + { 0x54006, LPDDR4_PHY_VREF_VALUE },
> + { 0x54007, 0x0 },
> + { 0x54008, 0x121f },
> + { 0x54009, 0xc8 },
> + { 0x5400a, 0x0 },
> + { 0x5400b, 0x2 },
> + { 0x5400c, 0x0 },
> + { 0x5400d, 0x0 },
> + { 0x5400e, 0x0 },
> + { 0x5400f, 0x0 },
> + { 0x54010, 0x0 },
> + { 0x54011, 0x0 },
> + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
> + { 0x54013, 0x0 },
> + { 0x54014, 0x0 },
> + { 0x54015, 0x0 },
> + { 0x54016, 0x0 },
> + { 0x54017, 0x0 },
> + { 0x54018, 0x0 },
> + { 0x54019, 0x84 },
> + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x5401b, 0x4d66 },
> + { 0x5401c, 0x4d08 },
> + { 0x5401d, 0x0 },
> + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
> + { 0x5401f, 0x84 },
> + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x54021, 0x4d66 },
> + { 0x54022, 0x4d08 },
> + { 0x54023, 0x0 },
> + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
> + { 0x54025, 0x0 },
> + { 0x54026, 0x0 },
> + { 0x54027, 0x0 },
> + { 0x54028, 0x0 },
> + { 0x54029, 0x0 },
> + { 0x5402a, 0x0 },
> + { 0x5402b, 0x1000 },
> + { 0x5402c, LPDDR4_CS },
> + { 0x5402d, 0x0 },
> + { 0x5402e, 0x0 },
> + { 0x5402f, 0x0 },
> + { 0x54030, 0x0 },
> + { 0x54031, 0x0 },
> + { 0x54032, 0x8400 },
> + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
> + { 0x54034, 0x6600 },
> + { 0x54035, 0x84d },
> + { 0x54036, 0x4d },
> + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
> + { 0x54038, 0x8400 },
> + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
> + { 0x5403a, 0x6600 },
> + { 0x5403b, 0x84d },
> + { 0x5403c, 0x4d },
> + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
> + { 0x5403e, 0x0 },
> + { 0x5403f, 0x0 },
> + { 0x54040, 0x0 },
> + { 0x54041, 0x0 },
> + { 0x54042, 0x0 },
> + { 0x54043, 0x0 },
> + { 0x54044, 0x0 },
> + { 0xd0000, 0x1 },
> +};
> +
> +/* P0 2D message block paremeter for training firmware */
> +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = {
> + { 0xd0000, 0x0 },
> + { 0x54000, 0x0 },
> + { 0x54001, 0x0 },
> + { 0x54002, 0x0 },
> + { 0x54003, 0xbb8 },
> + { 0x54004, 0x2 },
> + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY
> Ron/Rtt
> + { 0x54006, LPDDR4_PHY_VREF_VALUE },
> + { 0x54007, 0x0 },
> + { 0x54008, 0x61 },
> + { 0x54009, 0xc8 },
> + { 0x5400a, 0x0 },
> + { 0x5400b, 0x2 },
> + { 0x5400c, 0x0 },
> + { 0x5400d, 0x0 },
> + { 0x5400e, 0x0 },
> + { 0x5400f, 0x100 },
> + { 0x54010, 0x1f7f },
> + { 0x54011, 0x0 },
> + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
> + { 0x54013, 0x0 },
> + { 0x54014, 0x0 },
> + { 0x54015, 0x0 },
> + { 0x54016, 0x0 },
> + { 0x54017, 0x0 },
> + { 0x54018, 0x0 },
> + { 0x54019, 0x2dd4 },
> + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x5401b, 0x4d66 },
> + { 0x5401c, 0x4d08 },
> + { 0x5401d, 0x0 },
> + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
> + { 0x5401f, 0x2dd4 },
> + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
> + { 0x54021, 0x4d66 },
> + { 0x54022, 0x4d08 },
> + { 0x54023, 0x0 },
> + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
> + { 0x54025, 0x0 },
> + { 0x54026, 0x0 },
> + { 0x54027, 0x0 },
> + { 0x54028, 0x0 },
> + { 0x54029, 0x0 },
> + { 0x5402a, 0x0 },
> + { 0x5402b, 0x1000 },
> + { 0x5402c, LPDDR4_CS },
> + { 0x5402d, 0x0 },
> + { 0x5402e, 0x0 },
> + { 0x5402f, 0x0 },
> + { 0x54030, 0x0 },
> + { 0x54031, 0x0 },
> + { 0x54032, 0xd400 },
> + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
> + { 0x54034, 0x6600 },
> + { 0x54035, 0x84d },
> + { 0x54036, 0x4d },
> + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
> + { 0x54038, 0xd400 },
> + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
> + { 0x5403a, 0x6600 },
> + { 0x5403b, 0x84d },
> + { 0x5403c, 0x4d },
> + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
> + { 0x5403e, 0x0 },
> + { 0x5403f, 0x0 },
> + { 0x54040, 0x0 },
> + { 0x54041, 0x0 },
> + { 0x54042, 0x0 },
> + { 0x54043, 0x0 },
> + { 0x54044, 0x0 },
> + { 0xd0000, 0x1 },
> +};
> +
> +/* DRAM PHY init engine image */
> +struct dram_cfg_param lpddr4_phy_pie[] = {
> + { 0xd0000, 0x0 },
> + { 0x90000, 0x10 },
> + { 0x90001, 0x400 },
> + { 0x90002, 0x10e },
> + { 0x90003, 0x0 },
> + { 0x90004, 0x0 },
> + { 0x90005, 0x8 },
> + { 0x90029, 0xb },
> + { 0x9002a, 0x480 },
> + { 0x9002b, 0x109 },
> + { 0x9002c, 0x8 },
> + { 0x9002d, 0x448 },
> + { 0x9002e, 0x139 },
> + { 0x9002f, 0x8 },
> + { 0x90030, 0x478 },
> + { 0x90031, 0x109 },
> + { 0x90032, 0x0 },
> + { 0x90033, 0xe8 },
> + { 0x90034, 0x109 },
> + { 0x90035, 0x2 },
> + { 0x90036, 0x10 },
> + { 0x90037, 0x139 },
> + { 0x90038, 0xf },
> + { 0x90039, 0x7c0 },
> + { 0x9003a, 0x139 },
> + { 0x9003b, 0x44 },
> + { 0x9003c, 0x630 },
> + { 0x9003d, 0x159 },
> + { 0x9003e, 0x14f },
> + { 0x9003f, 0x630 },
> + { 0x90040, 0x159 },
> + { 0x90041, 0x47 },
> + { 0x90042, 0x630 },
> + { 0x90043, 0x149 },
> + { 0x90044, 0x4f },
> + { 0x90045, 0x630 },
> + { 0x90046, 0x179 },
> + { 0x90047, 0x8 },
> + { 0x90048, 0xe0 },
> + { 0x90049, 0x109 },
> + { 0x9004a, 0x0 },
> + { 0x9004b, 0x7c8 },
> + { 0x9004c, 0x109 },
> + { 0x9004d, 0x0 },
> + { 0x9004e, 0x1 },
> + { 0x9004f, 0x8 },
> + { 0x90050, 0x0 },
> + { 0x90051, 0x45a },
> + { 0x90052, 0x9 },
> + { 0x90053, 0x0 },
> + { 0x90054, 0x448 },
> + { 0x90055, 0x109 },
> + { 0x90056, 0x40 },
> + { 0x90057, 0x630 },
> + { 0x90058, 0x179 },
> + { 0x90059, 0x1 },
> + { 0x9005a, 0x618 },
> + { 0x9005b, 0x109 },
> + { 0x9005c, 0x40c0 },
> + { 0x9005d, 0x630 },
> + { 0x9005e, 0x149 },
> + { 0x9005f, 0x8 },
> + { 0x90060, 0x4 },
> + { 0x90061, 0x48 },
> + { 0x90062, 0x4040 },
> + { 0x90063, 0x630 },
> + { 0x90064, 0x149 },
> + { 0x90065, 0x0 },
> + { 0x90066, 0x4 },
> + { 0x90067, 0x48 },
> + { 0x90068, 0x40 },
> + { 0x90069, 0x630 },
> + { 0x9006a, 0x149 },
> + { 0x9006b, 0x10 },
> + { 0x9006c, 0x4 },
> + { 0x9006d, 0x18 },
> + { 0x9006e, 0x0 },
> + { 0x9006f, 0x4 },
> + { 0x90070, 0x78 },
> + { 0x90071, 0x549 },
> + { 0x90072, 0x630 },
> + { 0x90073, 0x159 },
> + { 0x90074, 0xd49 },
> + { 0x90075, 0x630 },
> + { 0x90076, 0x159 },
> + { 0x90077, 0x94a },
> + { 0x90078, 0x630 },
> + { 0x90079, 0x159 },
> + { 0x9007a, 0x441 },
> + { 0x9007b, 0x630 },
> + { 0x9007c, 0x149 },
> + { 0x9007d, 0x42 },
> + { 0x9007e, 0x630 },
> + { 0x9007f, 0x149 },
> + { 0x90080, 0x1 },
> + { 0x90081, 0x630 },
> + { 0x90082, 0x149 },
> + { 0x90083, 0x0 },
> + { 0x90084, 0xe0 },
> + { 0x90085, 0x109 },
> + { 0x90086, 0xa },
> + { 0x90087, 0x10 },
> + { 0x90088, 0x109 },
> + { 0x90089, 0x9 },
> + { 0x9008a, 0x3c0 },
> + { 0x9008b, 0x149 },
> + { 0x9008c, 0x9 },
> + { 0x9008d, 0x3c0 },
> + { 0x9008e, 0x159 },
> + { 0x9008f, 0x18 },
> + { 0x90090, 0x10 },
> + { 0x90091, 0x109 },
> + { 0x90092, 0x0 },
> + { 0x90093, 0x3c0 },
> + { 0x90094, 0x109 },
> + { 0x90095, 0x18 },
> + { 0x90096, 0x4 },
> + { 0x90097, 0x48 },
> + { 0x90098, 0x18 },
> + { 0x90099, 0x4 },
> + { 0x9009a, 0x58 },
> + { 0x9009b, 0xa },
> + { 0x9009c, 0x10 },
> + { 0x9009d, 0x109 },
> + { 0x9009e, 0x2 },
> + { 0x9009f, 0x10 },
> + { 0x900a0, 0x109 },
> + { 0x900a1, 0x5 },
> + { 0x900a2, 0x7c0 },
> + { 0x900a3, 0x109 },
> + { 0x900a4, 0x10 },
> + { 0x900a5, 0x10 },
> + { 0x900a6, 0x109 },
> + { 0x40000, 0x811 },
> + { 0x40020, 0x880 },
> + { 0x40040, 0x0 },
> + { 0x40060, 0x0 },
> + { 0x40001, 0x4008 },
> + { 0x40021, 0x83 },
> + { 0x40041, 0x4f },
> + { 0x40061, 0x0 },
> + { 0x40002, 0x4040 },
> + { 0x40022, 0x83 },
> + { 0x40042, 0x51 },
> + { 0x40062, 0x0 },
> + { 0x40003, 0x811 },
> + { 0x40023, 0x880 },
> + { 0x40043, 0x0 },
> + { 0x40063, 0x0 },
> + { 0x40004, 0x720 },
> + { 0x40024, 0xf },
> + { 0x40044, 0x1740 },
> + { 0x40064, 0x0 },
> + { 0x40005, 0x16 },
> + { 0x40025, 0x83 },
> + { 0x40045, 0x4b },
> + { 0x40065, 0x0 },
> + { 0x40006, 0x716 },
> + { 0x40026, 0xf },
> + { 0x40046, 0x2001 },
> + { 0x40066, 0x0 },
> + { 0x40007, 0x716 },
> + { 0x40027, 0xf },
> + { 0x40047, 0x2800 },
> + { 0x40067, 0x0 },
> + { 0x40008, 0x716 },
> + { 0x40028, 0xf },
> + { 0x40048, 0xf00 },
> + { 0x40068, 0x0 },
> + { 0x40009, 0x720 },
> + { 0x40029, 0xf },
> + { 0x40049, 0x1400 },
> + { 0x40069, 0x0 },
> + { 0x4000a, 0xe08 },
> + { 0x4002a, 0xc15 },
> + { 0x4004a, 0x0 },
> + { 0x4006a, 0x0 },
> + { 0x4000b, 0x623 },
> + { 0x4002b, 0x15 },
> + { 0x4004b, 0x0 },
> + { 0x4006b, 0x0 },
> + { 0x4000c, 0x4028 },
> + { 0x4002c, 0x80 },
> + { 0x4004c, 0x0 },
> + { 0x4006c, 0x0 },
> + { 0x4000d, 0xe08 },
> + { 0x4002d, 0xc1a },
> + { 0x4004d, 0x0 },
> + { 0x4006d, 0x0 },
> + { 0x4000e, 0x623 },
> + { 0x4002e, 0x1a },
> + { 0x4004e, 0x0 },
> + { 0x4006e, 0x0 },
> + { 0x4000f, 0x4040 },
> + { 0x4002f, 0x80 },
> + { 0x4004f, 0x0 },
> + { 0x4006f, 0x0 },
> + { 0x40010, 0x2604 },
> + { 0x40030, 0x15 },
> + { 0x40050, 0x0 },
> + { 0x40070, 0x0 },
> + { 0x40011, 0x708 },
> + { 0x40031, 0x5 },
> + { 0x40051, 0x0 },
> + { 0x40071, 0x2002 },
> + { 0x40012, 0x8 },
> + { 0x40032, 0x80 },
> + { 0x40052, 0x0 },
> + { 0x40072, 0x0 },
> + { 0x40013, 0x2604 },
> + { 0x40033, 0x1a },
> + { 0x40053, 0x0 },
> + { 0x40073, 0x0 },
> + { 0x40014, 0x708 },
> + { 0x40034, 0xa },
> + { 0x40054, 0x0 },
> + { 0x40074, 0x2002 },
> + { 0x40015, 0x4040 },
> + { 0x40035, 0x80 },
> + { 0x40055, 0x0 },
> + { 0x40075, 0x0 },
> + { 0x40016, 0x60a },
> + { 0x40036, 0x15 },
> + { 0x40056, 0x1200 },
> + { 0x40076, 0x0 },
> + { 0x40017, 0x61a },
> + { 0x40037, 0x15 },
> + { 0x40057, 0x1300 },
> + { 0x40077, 0x0 },
> + { 0x40018, 0x60a },
> + { 0x40038, 0x1a },
> + { 0x40058, 0x1200 },
> + { 0x40078, 0x0 },
> + { 0x40019, 0x642 },
> + { 0x40039, 0x1a },
> + { 0x40059, 0x1300 },
> + { 0x40079, 0x0 },
> + { 0x4001a, 0x4808 },
> + { 0x4003a, 0x880 },
> + { 0x4005a, 0x0 },
> + { 0x4007a, 0x0 },
> + { 0x900a7, 0x0 },
> + { 0x900a8, 0x790 },
> + { 0x900a9, 0x11a },
> + { 0x900aa, 0x8 },
> + { 0x900ab, 0x7aa },
> + { 0x900ac, 0x2a },
> + { 0x900ad, 0x10 },
> + { 0x900ae, 0x7b2 },
> + { 0x900af, 0x2a },
> + { 0x900b0, 0x0 },
> + { 0x900b1, 0x7c8 },
> + { 0x900b2, 0x109 },
> + { 0x900b3, 0x10 },
> + { 0x900b4, 0x2a8 },
> + { 0x900b5, 0x129 },
> + { 0x900b6, 0x8 },
> + { 0x900b7, 0x370 },
> + { 0x900b8, 0x129 },
> + { 0x900b9, 0xa },
> + { 0x900ba, 0x3c8 },
> + { 0x900bb, 0x1a9 },
> + { 0x900bc, 0xc },
> + { 0x900bd, 0x408 },
> + { 0x900be, 0x199 },
> + { 0x900bf, 0x14 },
> + { 0x900c0, 0x790 },
> + { 0x900c1, 0x11a },
> + { 0x900c2, 0x8 },
> + { 0x900c3, 0x4 },
> + { 0x900c4, 0x18 },
> + { 0x900c5, 0xe },
> + { 0x900c6, 0x408 },
> + { 0x900c7, 0x199 },
> + { 0x900c8, 0x8 },
> + { 0x900c9, 0x8568 },
> + { 0x900ca, 0x108 },
> + { 0x900cb, 0x18 },
> + { 0x900cc, 0x790 },
> + { 0x900cd, 0x16a },
> + { 0x900ce, 0x8 },
> + { 0x900cf, 0x1d8 },
> + { 0x900d0, 0x169 },
> + { 0x900d1, 0x10 },
> + { 0x900d2, 0x8558 },
> + { 0x900d3, 0x168 },
> + { 0x900d4, 0x70 },
> + { 0x900d5, 0x788 },
> + { 0x900d6, 0x16a },
> + { 0x900d7, 0x1ff8 },
> + { 0x900d8, 0x85a8 },
> + { 0x900d9, 0x1e8 },
> + { 0x900da, 0x50 },
> + { 0x900db, 0x798 },
> + { 0x900dc, 0x16a },
> + { 0x900dd, 0x60 },
> + { 0x900de, 0x7a0 },
> + { 0x900df, 0x16a },
> + { 0x900e0, 0x8 },
> + { 0x900e1, 0x8310 },
> + { 0x900e2, 0x168 },
> + { 0x900e3, 0x8 },
> + { 0x900e4, 0xa310 },
> + { 0x900e5, 0x168 },
> + { 0x900e6, 0xa },
> + { 0x900e7, 0x408 },
> + { 0x900e8, 0x169 },
> + { 0x900e9, 0x6e },
> + { 0x900ea, 0x0 },
> + { 0x900eb, 0x68 },
> + { 0x900ec, 0x0 },
> + { 0x900ed, 0x408 },
> + { 0x900ee, 0x169 },
> + { 0x900ef, 0x0 },
> + { 0x900f0, 0x8310 },
> + { 0x900f1, 0x168 },
> + { 0x900f2, 0x0 },
> + { 0x900f3, 0xa310 },
> + { 0x900f4, 0x168 },
> + { 0x900f5, 0x1ff8 },
> + { 0x900f6, 0x85a8 },
> + { 0x900f7, 0x1e8 },
> + { 0x900f8, 0x68 },
> + { 0x900f9, 0x798 },
> + { 0x900fa, 0x16a },
> + { 0x900fb, 0x78 },
> + { 0x900fc, 0x7a0 },
> + { 0x900fd, 0x16a },
> + { 0x900fe, 0x68 },
> + { 0x900ff, 0x790 },
> + { 0x90100, 0x16a },
> + { 0x90101, 0x8 },
> + { 0x90102, 0x8b10 },
> + { 0x90103, 0x168 },
> + { 0x90104, 0x8 },
> + { 0x90105, 0xab10 },
> + { 0x90106, 0x168 },
> + { 0x90107, 0xa },
> + { 0x90108, 0x408 },
> + { 0x90109, 0x169 },
> + { 0x9010a, 0x58 },
> + { 0x9010b, 0x0 },
> + { 0x9010c, 0x68 },
> + { 0x9010d, 0x0 },
> + { 0x9010e, 0x408 },
> + { 0x9010f, 0x169 },
> + { 0x90110, 0x0 },
> + { 0x90111, 0x8b10 },
> + { 0x90112, 0x168 },
> + { 0x90113, 0x0 },
> + { 0x90114, 0xab10 },
> + { 0x90115, 0x168 },
> + { 0x90116, 0x0 },
> + { 0x90117, 0x1d8 },
> + { 0x90118, 0x169 },
> + { 0x90119, 0x80 },
> + { 0x9011a, 0x790 },
> + { 0x9011b, 0x16a },
> + { 0x9011c, 0x18 },
> + { 0x9011d, 0x7aa },
> + { 0x9011e, 0x6a },
> + { 0x9011f, 0xa },
> + { 0x90120, 0x0 },
> + { 0x90121, 0x1e9 },
> + { 0x90122, 0x8 },
> + { 0x90123, 0x8080 },
> + { 0x90124, 0x108 },
> + { 0x90125, 0xf },
> + { 0x90126, 0x408 },
> + { 0x90127, 0x169 },
> + { 0x90128, 0xc },
> + { 0x90129, 0x0 },
> + { 0x9012a, 0x68 },
> + { 0x9012b, 0x9 },
> + { 0x9012c, 0x0 },
> + { 0x9012d, 0x1a9 },
> + { 0x9012e, 0x0 },
> + { 0x9012f, 0x408 },
> + { 0x90130, 0x169 },
> + { 0x90131, 0x0 },
> + { 0x90132, 0x8080 },
> + { 0x90133, 0x108 },
> + { 0x90134, 0x8 },
> + { 0x90135, 0x7aa },
> + { 0x90136, 0x6a },
> + { 0x90137, 0x0 },
> + { 0x90138, 0x8568 },
> + { 0x90139, 0x108 },
> + { 0x9013a, 0xb7 },
> + { 0x9013b, 0x790 },
> + { 0x9013c, 0x16a },
> + { 0x9013d, 0x1f },
> + { 0x9013e, 0x0 },
> + { 0x9013f, 0x68 },
> + { 0x90140, 0x8 },
> + { 0x90141, 0x8558 },
> + { 0x90142, 0x168 },
> + { 0x90143, 0xf },
> + { 0x90144, 0x408 },
> + { 0x90145, 0x169 },
> + { 0x90146, 0xc },
> + { 0x90147, 0x0 },
> + { 0x90148, 0x68 },
> + { 0x90149, 0x0 },
> + { 0x9014a, 0x408 },
> + { 0x9014b, 0x169 },
> + { 0x9014c, 0x0 },
> + { 0x9014d, 0x8558 },
> + { 0x9014e, 0x168 },
> + { 0x9014f, 0x8 },
> + { 0x90150, 0x3c8 },
> + { 0x90151, 0x1a9 },
> + { 0x90152, 0x3 },
> + { 0x90153, 0x370 },
> + { 0x90154, 0x129 },
> + { 0x90155, 0x20 },
> + { 0x90156, 0x2aa },
> + { 0x90157, 0x9 },
> + { 0x90158, 0x0 },
> + { 0x90159, 0x400 },
> + { 0x9015a, 0x10e },
> + { 0x9015b, 0x8 },
> + { 0x9015c, 0xe8 },
> + { 0x9015d, 0x109 },
> + { 0x9015e, 0x0 },
> + { 0x9015f, 0x8140 },
> + { 0x90160, 0x10c },
> + { 0x90161, 0x10 },
> + { 0x90162, 0x8138 },
> + { 0x90163, 0x10c },
> + { 0x90164, 0x8 },
> + { 0x90165, 0x7c8 },
> + { 0x90166, 0x101 },
> + { 0x90167, 0x8 },
> + { 0x90168, 0x0 },
> + { 0x90169, 0x8 },
> + { 0x9016a, 0x8 },
> + { 0x9016b, 0x448 },
> + { 0x9016c, 0x109 },
> + { 0x9016d, 0xf },
> + { 0x9016e, 0x7c0 },
> + { 0x9016f, 0x109 },
> + { 0x90170, 0x0 },
> + { 0x90171, 0xe8 },
> + { 0x90172, 0x109 },
> + { 0x90173, 0x47 },
> + { 0x90174, 0x630 },
> + { 0x90175, 0x109 },
> + { 0x90176, 0x8 },
> + { 0x90177, 0x618 },
> + { 0x90178, 0x109 },
> + { 0x90179, 0x8 },
> + { 0x9017a, 0xe0 },
> + { 0x9017b, 0x109 },
> + { 0x9017c, 0x0 },
> + { 0x9017d, 0x7c8 },
> + { 0x9017e, 0x109 },
> + { 0x9017f, 0x8 },
> + { 0x90180, 0x8140 },
> + { 0x90181, 0x10c },
> + { 0x90182, 0x0 },
> + { 0x90183, 0x1 },
> + { 0x90184, 0x8 },
> + { 0x90185, 0x8 },
> + { 0x90186, 0x4 },
> + { 0x90187, 0x8 },
> + { 0x90188, 0x8 },
> + { 0x90189, 0x7c8 },
> + { 0x9018a, 0x101 },
> + { 0x90006, 0x0 },
> + { 0x90007, 0x0 },
> + { 0x90008, 0x8 },
> + { 0x90009, 0x0 },
> + { 0x9000a, 0x0 },
> + { 0x9000b, 0x0 },
> + { 0xd00e7, 0x400 },
> + { 0x90017, 0x0 },
> + { 0x9001f, 0x2a },
> + { 0x90026, 0x6a },
> + { 0x400d0, 0x0 },
> + { 0x400d1, 0x101 },
> + { 0x400d2, 0x105 },
> + { 0x400d3, 0x107 },
> + { 0x400d4, 0x10f },
> + { 0x400d5, 0x202 },
> + { 0x400d6, 0x20a },
> + { 0x400d7, 0x20b },
> + { 0x2003a, 0x2 },
> + { 0x2000b, 0x5d },
> + { 0x2000c, 0xbb },
> + { 0x2000d, 0x753 },
> + { 0x2000e, 0x2c },
> + { 0x12000b, 0xc },
> + { 0x12000c, 0x19 },
> + { 0x12000d, 0xfa },
> + { 0x12000e, 0x10 },
> + { 0x22000b, 0x3 },
> + { 0x22000c, 0x6 },
> + { 0x22000d, 0x3e },
> + { 0x22000e, 0x10 },
> + { 0x9000c, 0x0 },
> + { 0x9000d, 0x173 },
> + { 0x9000e, 0x60 },
> + { 0x9000f, 0x6110 },
> + { 0x90010, 0x2152 },
> + { 0x90011, 0xdfbd },
> + { 0x90012, 0x60 },
> + { 0x90013, 0x6152 },
> + { 0x20010, 0x5a },
> + { 0x20011, 0x3 },
> + { 0x40080, 0xe0 },
> + { 0x40081, 0x12 },
> + { 0x40082, 0xe0 },
> + { 0x40083, 0x12 },
> + { 0x40084, 0xe0 },
> + { 0x40085, 0x12 },
> + { 0x140080, 0xe0 },
> + { 0x140081, 0x12 },
> + { 0x140082, 0xe0 },
> + { 0x140083, 0x12 },
> + { 0x140084, 0xe0 },
> + { 0x140085, 0x12 },
> + { 0x240080, 0xe0 },
> + { 0x240081, 0x12 },
> + { 0x240082, 0xe0 },
> + { 0x240083, 0x12 },
> + { 0x240084, 0xe0 },
> + { 0x240085, 0x12 },
> + { 0x400fd, 0xf },
> + { 0x10011, 0x1 },
> + { 0x10012, 0x1 },
> + { 0x10013, 0x180 },
> + { 0x10018, 0x1 },
> + { 0x10002, 0x6209 },
> + { 0x100b2, 0x1 },
> + { 0x101b4, 0x1 },
> + { 0x102b4, 0x1 },
> + { 0x103b4, 0x1 },
> + { 0x104b4, 0x1 },
> + { 0x105b4, 0x1 },
> + { 0x106b4, 0x1 },
> + { 0x107b4, 0x1 },
> + { 0x108b4, 0x1 },
> + { 0x11011, 0x1 },
> + { 0x11012, 0x1 },
> + { 0x11013, 0x180 },
> + { 0x11018, 0x1 },
> + { 0x11002, 0x6209 },
> + { 0x110b2, 0x1 },
> + { 0x111b4, 0x1 },
> + { 0x112b4, 0x1 },
> + { 0x113b4, 0x1 },
> + { 0x114b4, 0x1 },
> + { 0x115b4, 0x1 },
> + { 0x116b4, 0x1 },
> + { 0x117b4, 0x1 },
> + { 0x118b4, 0x1 },
> + { 0x12011, 0x1 },
> + { 0x12012, 0x1 },
> + { 0x12013, 0x180 },
> + { 0x12018, 0x1 },
> + { 0x12002, 0x6209 },
> + { 0x120b2, 0x1 },
> + { 0x121b4, 0x1 },
> + { 0x122b4, 0x1 },
> + { 0x123b4, 0x1 },
> + { 0x124b4, 0x1 },
> + { 0x125b4, 0x1 },
> + { 0x126b4, 0x1 },
> + { 0x127b4, 0x1 },
> + { 0x128b4, 0x1 },
> + { 0x13011, 0x1 },
> + { 0x13012, 0x1 },
> + { 0x13013, 0x180 },
> + { 0x13018, 0x1 },
> + { 0x13002, 0x6209 },
> + { 0x130b2, 0x1 },
> + { 0x131b4, 0x1 },
> + { 0x132b4, 0x1 },
> + { 0x133b4, 0x1 },
> + { 0x134b4, 0x1 },
> + { 0x135b4, 0x1 },
> + { 0x136b4, 0x1 },
> + { 0x137b4, 0x1 },
> + { 0x138b4, 0x1 },
> + { 0x2003a, 0x2 },
> + { 0xc0080, 0x2 },
> + { 0xd0000, 0x1 },
> +};
The same as above.
> +
> +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
> + {
> + /* P0 3000mts 1D */
> + .drate = 3000,
> + .fw_type = FW_1D_IMAGE,
> + .fsp_cfg = lpddr4_fsp0_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg),
> + },
> + {
> + /* P0 3000mts 2D */
> + .drate = 3000,
> + .fw_type = FW_2D_IMAGE,
> + .fsp_cfg = lpddr4_fsp0_2d_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
> + },
> + {
> + /* P1 400mts 1D */
> + .drate = 400,
> + .fw_type = FW_1D_IMAGE,
> + .fsp_cfg = lpddr4_fsp1_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg),
> + },
> + {
> + /* P1 100mts 1D */
> + .drate = 100,
> + .fw_type = FW_1D_IMAGE,
> + .fsp_cfg = lpddr4_fsp2_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg),
> + },
> +};
> +
> +/* lpddr4 timing config params on EVK board */
> +struct dram_timing_info dram_timing = {
> + .ddrc_cfg = lpddr4_ddrc_cfg,
> + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg),
> + .ddrphy_cfg = lpddr4_ddrphy_cfg,
> + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg),
> + .fsp_msg = lpddr4_dram_fsp_msg,
> + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg),
> + .ddrphy_trained_csr = lpddr4_ddrphy_trained_csr,
> + .ddrphy_trained_csr_num =
> ARRAY_SIZE(lpddr4_ddrphy_trained_csr),
> + .ddrphy_pie = lpddr4_phy_pie,
> + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),
It would be best to get the above values calculated dynamically for
this SoC.
> +};
> diff --git a/board/freescale/imx8mm_evk/spl.c
> b/board/freescale/imx8mm_evk/spl.c new file mode 100644
> index 0000000000..cf1dfc2c2a
> --- /dev/null
> +++ b/board/freescale/imx8mm_evk/spl.c
> @@ -0,0 +1,187 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 NXP
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +#include <asm/io.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm/arch/imx8mm_pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <power/pmic.h>
> +#include <asm/arch/clock.h>
> +#include <asm/mach-imx/gpio.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <fsl_esdhc.h>
> +#include <mmc.h>
> +#include <asm/arch/ddr.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void spl_dram_init(void)
> +{
> + ddr_init(&dram_timing);
> +}
> +
> +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 18)
> +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19)
> +
> +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \
> + PAD_CTL_PE | PAD_CTL_FSEL2)
> +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE1)
> +
> +static iomux_v3_cfg_t const usdhc3_pads[] = {
> + IMX8MM_PAD_NAND_WE_B_USDHC3_CLK |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_WP_B_USDHC3_CMD |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_NAND_CLE_USDHC3_DATA7 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL), +};
> +
> +static iomux_v3_cfg_t const usdhc2_pads[] = {
> + IMX8MM_PAD_SD2_CLK_USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_CMD_USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 |
> MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19 |
> MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +};
> +
> +/*
> + * The evk board uses DAT3 to detect CD card plugin,
> + * in u-boot we mux the pin to GPIO when doing board_mmc_getcd.
> + */
> +static iomux_v3_cfg_t const usdhc2_cd_pad =
> + IMX8MM_PAD_SD2_DATA3_GPIO2_IO18 |
> MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL); +
> +static iomux_v3_cfg_t const usdhc2_dat3_pad =
> + IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 |
> + MUX_PAD_CTRL(USDHC_PAD_CTRL);
> +
> +static struct fsl_esdhc_cfg usdhc_cfg[2] = {
> + {USDHC2_BASE_ADDR, 0, 1},
> + {USDHC3_BASE_ADDR, 0, 1},
> +};
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + int i, ret;
> + /*
> + * According to the board_mmc_init() the following map is
> done:
> + * (U-Boot device node) (Physical Port)
> + * mmc0 USDHC1
> + * mmc1 USDHC2
> + */
> + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
> + switch (i) {
> + case 0:
> + usdhc_cfg[0].sdhc_clk =
> mxc_get_clock(MXC_ESDHC2_CLK);
> + imx_iomux_v3_setup_multiple_pads(usdhc2_pads,
> +
> ARRAY_SIZE(usdhc2_pads));
> + gpio_request(USDHC2_PWR_GPIO,
> "usdhc2_reset");
> + gpio_direction_output(USDHC2_PWR_GPIO, 0);
> + udelay(500);
> + gpio_direction_output(USDHC2_PWR_GPIO, 1);
> + break;
> + case 1:
> + usdhc_cfg[1].sdhc_clk =
> mxc_get_clock(MXC_ESDHC3_CLK);
> + imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
> +
> ARRAY_SIZE(usdhc3_pads));
> + break;
It would be best if you could enable DM/DTS in SPL too from the outset
(and share the SPL size).
Do you have any timeline for converting SPL to DM/DTS?
> + default:
> + printf("USDHC controllers %d not supported
> \n", i + 1);
> + return -EINVAL;
> + }
> +
> + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg
> *)mmc->priv;
> + int ret = 0;
> +
> + switch (cfg->esdhc_base) {
> + case USDHC3_BASE_ADDR:
> + ret = 1;
> + break;
> + case USDHC2_BASE_ADDR:
> + imx_iomux_v3_setup_pad(usdhc2_cd_pad);
> + gpio_request(USDHC2_CD_GPIO, "usdhc2 cd");
> + gpio_direction_input(USDHC2_CD_GPIO);
> +
> + /*
> + * Since it is the DAT3 pin, this pin is pulled to
> + * low voltage if no card
> + */
> + ret = gpio_get_value(USDHC2_CD_GPIO);
> +
> + imx_iomux_v3_setup_pad(usdhc2_dat3_pad);
> + return ret;
> + }
> +
> + return 1;
> +}
> +
> +void spl_board_init(void)
> +{
> + puts("Normal Boot\n");
> +}
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> + /* Just empty function now - can't decide what to choose */
> + debug("%s: %s\n", __func__, name);
> +
> + return 0;
> +}
> +#endif
> +
> +void board_init_f(ulong dummy)
> +{
> + int ret;
> +
> + /* Clear global data */
> + memset((void *)gd, 0, sizeof(gd_t));
> +
> + arch_cpu_init();
> +
> + init_uart_clk(1);
> +
> + board_early_init_f();
> +
> + timer_init();
> +
> + preloader_console_init();
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + ret = spl_init();
> + if (ret) {
> + debug("spl_init() failed: %d\n", ret);
> + hang();
> + }
> +
> + enable_tzc380();
> +
> + /* DDR initialization */
> + spl_dram_init();
> +
> + board_init_r(NULL, 0);
> +}
> diff --git a/configs/imx8mm_evk_defconfig
> b/configs/imx8mm_evk_defconfig new file mode 100644
> index 0000000000..6110f23e38
> --- /dev/null
> +++ b/configs/imx8mm_evk_defconfig
> @@ -0,0 +1,41 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_IMX8M=y
> +CONFIG_SYS_TEXT_BASE=0x40200000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_TARGET_IMX8MM_EVK=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL=y
> +CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg,SPL_TEXT_BASE=0x7E1000"
> +CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-evk.dtb"
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_I2C_SUPPORT=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mm-evk"
> +CONFIG_DM_GPIO=y
> +CONFIG_MXC_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MXC=y
> +CONFIG_DM_MMC=y
> +CONFIG_DM_ETH=y
Here you enable the DM_ETH, but the welcome u-boot info says:
"Net: No ethernet found."
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_IMX8M=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_MXC_UART=y
> +CONFIG_DM_THERMAL=y
> diff --git a/include/configs/imx8mm_evk.h
> b/include/configs/imx8mm_evk.h new file mode 100644
> index 0000000000..f944308757
> --- /dev/null
> +++ b/include/configs/imx8mm_evk.h
> @@ -0,0 +1,221 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2018 NXP
> + */
> +
> +#ifndef __IMX8MM_EVK_H
> +#define __IMX8MM_EVK_H
> +
> +#include <linux/sizes.h>
> +#include <asm/arch/imx-regs.h>
> +
> +#ifdef CONFIG_SECURE_BOOT
> +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
> +#endif
> +
> +#define CONFIG_SPL_MAX_SIZE (148 * 1024)
> +#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
> +#define CONFIG_SYS_UBOOT_BASE \
> + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR *
> 512) +
> +#ifdef CONFIG_SPL_BUILD
> +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
> +#define CONFIG_SPL_WATCHDOG_SUPPORT
> +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
> +#define CONFIG_SPL_POWER_SUPPORT
> +#define
> CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
> +#define CONFIG_SPL_STACK 0x91fff0 +#define
> CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_BSS_START_ADDR 0x00910000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
> +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +
> +#define CONFIG_MALLOC_F_ADDR 0x912000 /* malloc f
> used before GD_FLG_FULL_MALLOC_INIT set */ +
> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error
> info not panic */ +
> +#undef CONFIG_DM_MMC
> +#undef CONFIG_DM_PMIC
> +#undef CONFIG_DM_PMIC_PFUZE100
Why do you need to undef those config options?
> +
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +
> +#endif
> +
> +#define CONFIG_REMAKE_ELF
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_BOARD_POSTCLK_INIT
> +#define CONFIG_BOARD_LATE_INIT
> +
> +/* Flat Device Tree Definitions */
> +#define CONFIG_OF_BOARD_SETUP
> +
> +#undef CONFIG_CMD_EXPORTENV
> +#undef CONFIG_CMD_IMPORTENV
> +#undef CONFIG_CMD_IMLS
> +
> +#undef CONFIG_CMD_CRC32
> +#undef CONFIG_BOOTM_NETBSD
There seems to be some issue with inheritance, as you need to undef
those values manually.
Why is it needed?
> +
> +/* ENET Config */
> +/* ENET1 */
> +#if defined(CONFIG_CMD_NET)
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_MII
> +#define CONFIG_MII
> +#define CONFIG_ETHPRIME "FEC"
> +
> +#define CONFIG_FEC_MXC
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define CONFIG_FEC_MXC_PHYADDR 0
> +#define FEC_QUIRK_ENET_MAC
> +
> +#define CONFIG_PHY_GIGE
> +#define IMX_FEC_BASE 0x30BE0000
> +
> +#define CONFIG_PHYLIB
> +#define CONFIG_PHY_ATHEROS
> +#endif
> +
> +/* Initial environment variables */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "script=boot.scr\0" \
> + "image=Image\0" \
> + "console=ttymxc1,115200
> earlycon=ec_imx6q,0x30890000,115200\0" \
> + "fdt_addr=0x43000000\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "boot_fdt=try\0" \
> + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
> + "initrd_addr=0x43800000\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
> + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcautodetect=yes\0" \
> + "mmcargs=setenv bootargs ${jh_clk} console=${console}
> root=${mmcroot}\0 " \
> + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${script};\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source\0" \
> + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${image}\0" \
> + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
> ${fdt_file}\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} =
> try; then " \
> + "if run loadfdt; then " \
> + "booti ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "else " \
> + "echo wait for boot; " \
> + "fi;\0" \
> + "netargs=setenv bootargs ${jh_clk} console=${console} " \
> + "root=/dev/nfs " \
> + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> + "netboot=echo Booting from net ...; " \
> + "run netargs; " \
> + "if test ${ip_dyn} = yes; then " \
> + "setenv get_cmd dhcp; " \
> + "else " \
> + "setenv get_cmd tftp; " \
> + "fi; " \
> + "${get_cmd} ${loadaddr} ${image}; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} =
> try; then " \
> + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then
> " \
> + "booti ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "else " \
> + "booti; " \
> + "fi;\0"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc dev ${mmcdev}; if mmc rescan; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loadimage; then " \
> + "run mmcboot; " \
> + "else run netboot; " \
> + "fi; " \
> + "fi; " \
> + "else booti ${loadaddr} - ${fdt_addr}; fi"
> +
> +/* Link Definitions */
> +#define CONFIG_LOADADDR 0x40480000
> +
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
> +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +#define CONFIG_ENV_OVERWRITE
> +#if defined(CONFIG_ENV_IS_IN_MMC)
> +#define CONFIG_ENV_OFFSET (64 * SZ_64K)
> +#endif
> +#define CONFIG_ENV_SIZE 0x1000
> +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */
> +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /*
> USDHC2 */ +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN SZ_32M
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x40000000
> +#define PHYS_SDRAM 0x40000000
> +#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR
> */ +
> +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START +
> (PHYS_SDRAM_SIZE >> 1)) +
> +#define CONFIG_BAUDRATE 115200
> +
> +#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
> +
> +/* Monitor Command Prompt */
> +#undef CONFIG_SYS_PROMPT
> +#define CONFIG_SYS_PROMPT "u-boot=> "
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_SYS_CBSIZE 2048
> +#define CONFIG_SYS_MAXARGS 64
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) +
> 16) +
> +#define CONFIG_IMX_BOOTAUX
> +
> +/* USDHC */
> +#define CONFIG_CMD_MMC
> +#define CONFIG_FSL_ESDHC
> +#define CONFIG_FSL_USDHC
> +
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> +
> +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
> +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
> +
> +#define CONFIG_MXC_OCOTP
> +#define CONFIG_CMD_FUSE
> +
> +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
> +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
> +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
> +#define CONFIG_SYS_I2C_SPEED 100000
Some of those values are (SYS_I2C_*, MXC_OCOTP, FSL_*) are already
supported by Kconfig. Please use Kconfig instead.
> +
> +#define CONFIG_OF_SYSTEM_SETUP
> +
> +#endif
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/fe085707/attachment-0001.sig>
More information about the U-Boot
mailing list