[U-Boot] [PATCH v1 15/15] imx: Convert mccmon6 to use fitImage instead of uImage+DTB
Lukasz Majewski
lukma at denx.de
Sat Jan 19 09:15:28 UTC 2019
This commit enabled support for fitImage on mccmon6 when we
switch to DT/DTS.
Moreover, it provides Falcon boot functionality to parallel
NOR flash memories (spl_nor.c).
Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
board/liebherr/mccmon6/spl.c | 7 ++++++
common/spl/spl_nor.c | 5 ++++
configs/mccmon6_nor_defconfig | 8 +++++-
configs/mccmon6_sd_defconfig | 6 ++++-
include/configs/mccmon6.h | 57 +++++++++++++++++--------------------------
5 files changed, 47 insertions(+), 36 deletions(-)
diff --git a/board/liebherr/mccmon6/spl.c b/board/liebherr/mccmon6/spl.c
index afd080fe26..c5cfea2a55 100644
--- a/board/liebherr/mccmon6/spl.c
+++ b/board/liebherr/mccmon6/spl.c
@@ -324,6 +324,13 @@ void board_boot_order(u32 *spl_boot_list)
}
}
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index 969e319de0..c9364072f3 100644
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -48,6 +48,11 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
CONFIG_SYS_OS_BASE,
(void *)header);
+#ifdef CONFIG_SYS_SPL_ARGS_ADDR
+ memcpy((void *)CONFIG_SYS_SPL_ARGS_ADDR,
+ (void *)CONFIG_CMD_SPL_NOR_OFS,
+ CONFIG_CMD_SPL_WRITE_SIZE);
+#endif
return ret;
}
#endif
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 9dea3a5b23..e4774d53da 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -10,11 +10,17 @@ CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_OS_BASE=0x8180000
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NOR_OFS=0x09600000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_CLK=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
@@ -27,7 +33,7 @@ CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m at 0x0(mccmon6-image.nor),256k at 0x40000(u-boot-env.nor),1m at 0x80000(u-boot.nor),8m at 0x180000(kernel.nor),8m at 0x980000(swupdate-kernel.nor),8m at 0x1180000(swupdate-rootfs.nor),128k at 0x1980000(kernel-dtb.nor),128k at 0x19C0000(swupdate-kernel-dtb.nor)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m at 0x0(mccmon6-image.nor),256k at 0x40000(u-boot-env.nor),1m at 0x80000(u-boot.nor),8m at 0x180000(kernel.nor),8m at 0x980000(swupdate-kernel.nor),8m at 0x1180000(swupdate-rootfs.nor)"
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6"
CONFIG_ENV_IS_IN_FLASH=y
diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig
index 86acd3cefe..926ca76cf4 100644
--- a/configs/mccmon6_sd_defconfig
+++ b/configs/mccmon6_sd_defconfig
@@ -11,11 +11,15 @@ CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NOR_OFS=0x09600000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_CLK=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
@@ -28,7 +32,7 @@ CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m at 0x0(mccmon6-image.nor),256k at 0x40000(u-boot-env.nor),1m at 0x80000(u-boot.nor),8m at 0x180000(kernel.nor),8m at 0x980000(swupdate-kernel.nor),8m at 0x1180000(swupdate-rootfs.nor),128k at 0x1980000(kernel-dtb.nor),128k at 0x19C0000(swupdate-kernel-dtb.nor)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m at 0x0(mccmon6-image.nor),256k at 0x40000(u-boot-env.nor),1m at 0x80000(u-boot.nor),8m at 0x180000(kernel.nor),8m at 0x980000(swupdate-kernel.nor),8m at 0x1180000(swupdate-rootfs.nor)"
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6"
CONFIG_ENV_IS_IN_FLASH=y
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index b25aacbf41..c685de6551 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -14,10 +14,6 @@
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
-#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000)
-#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000)
-#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K)
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/*
@@ -28,8 +24,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
@@ -61,14 +56,13 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200 quiet\0" \
- "fdtfile=imx6q-mccmon6.dtb\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"boot_os=yes\0" \
+ "kernelsize=0x300000\0" \
"disable_giga=yes\0" \
"download_kernel=" \
- "tftpboot ${kernel_addr} ${kernel_file};" \
- "tftpboot ${fdt_addr} ${fdtfile};\0" \
+ "tftpboot ${loadaddr} ${kernel_file};\0" \
"get_boot_medium=" \
"setenv boot_medium nor;" \
"setexpr.l _src_sbmr1 *0x020d8004;" \
@@ -76,10 +70,7 @@
"if test ${_b_medium} = 40; then " \
"setenv boot_medium sdcard;" \
"fi\0" \
- "kernel_file=uImage\0" \
- "load_kernel=" \
- "load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \
- "load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \
+ "kernel_file=fitImage\0" \
"boot_sd=" \
"echo '#######################';" \
"echo '# Factory SDcard Boot #';" \
@@ -90,12 +81,11 @@
"run factory_flash_img;\0" \
"boot_nor=" \
"setenv kernelnor 0x08180000;" \
- "setenv dtbnor 0x09980000;" \
"setenv bootargs console=${console} " \
CONFIG_MTDPARTS_DEFAULT " " \
"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
- "cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \
- "bootm ${kernelnor} - ${dtbloadaddr};\0" \
+ "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
+ "bootm ${loadaddr};reset;\0" \
"boot_recovery=" \
"echo '#######################';" \
"echo '# RECOVERY SWU Boot #';" \
@@ -103,14 +93,13 @@
"setenv rootfsloadaddr 0x13000000;" \
"setenv swukernelnor 0x08980000;" \
"setenv swurootfsnor 0x09180000;" \
- "setenv swudtbnor 0x099A0000;" \
"setenv bootargs console=${console} " \
CONFIG_MTDPARTS_DEFAULT " " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}::off root=/dev/ram rw;" \
"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
- "cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \
- "bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \
+ "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
+ "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
"boot_tftp=" \
"echo '#######################';" \
"echo '# TFTP Boot #';" \
@@ -118,7 +107,7 @@
"if run download_kernel; then " \
"setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rootwait;" \
- "bootm ${kernel_addr} - ${fdt_addr};" \
+ "bootm $loadaddr};reset;" \
"fi\0" \
"bootcmd=" \
"if test -n ${recovery_status}; then " \
@@ -138,13 +127,10 @@
"fi;" \
"fi\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "fdt_addr=0x18000000\0" \
"bootdev=1\0" \
"bootpart=1\0" \
- "kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \
"netdev=eth0\0" \
"load_addr=0x11000000\0" \
- "dtbloadaddr=0x12000000\0" \
"uboot_file=u-boot.img\0" \
"SPL_file=SPL\0" \
"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
@@ -171,6 +157,7 @@
"device ${mmcdev};" \
"run factory_nor_img;" \
"run factory_eMMC_img;" \
+ "run factory_SPL_falcon_setup;" \
"fi\0" \
"factory_eMMC_img="\
"echo 'Update mccmon6 eMMC image'; " \
@@ -192,6 +179,16 @@
"erase ${nor_bank_start} +${nor_img_size};" \
"setexpr nor_img_size ${nor_img_size} / 4; " \
"cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
+ "factory_SPL_falcon_setup="\
+ "echo 'Write Falcon boot data'; " \
+ "setenv kernelnor 0x08180000;" \
+ "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
+ "spl export fdt ${loadaddr};" \
+ "setenv nor_img_addr ${fdtargsaddr};" \
+ "setenv nor_img_size 0x20000;" \
+ "setenv nor_bank_start " \
+ __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
+ "run nor_update\0" \
"tftp_nor_uboot="\
"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
"setenv nor_img_file u-boot.img; " \
@@ -200,22 +197,14 @@
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
"run nor_update;" \
"fi\0" \
- "tftp_nor_uImg="\
- "echo 'Update mccmon6 NOR uImage via TFTP'; " \
- "setenv nor_img_file uImage; " \
+ "tftp_nor_fitImg="\
+ "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
+ "setenv nor_img_file fitImage; " \
"setenv nor_img_size 0x500000; " \
"setenv nor_bank_start 0x08180000; " \
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
"run nor_update;" \
"fi\0" \
- "tftp_nor_dtb="\
- "echo 'Update mccmon6 NOR DTB via TFTP'; " \
- "setenv nor_img_file imx6q-mccmon6.dtb; " \
- "setenv nor_img_size 0x20000; " \
- "setenv nor_bank_start 0x09980000; " \
- "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
- "run nor_update;" \
- "fi\0" \
"tftp_nor_img="\
"echo 'Update mccmon6 NOR image via TFTP'; " \
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
--
2.11.0
More information about the U-Boot
mailing list