[U-Boot] [PATCH v3 9/9] arm: dts: sunxi: Enumerate MMC2 as MMC1

[Chen-Yu Tsai]

On Mon, Jan 21, 2019 at 11:38 PM Vasily Khoruzhick <anarsoul at gmail.com> wrote:
>
> On Mon, Jan 21, 2019 at 2:32 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > Environment and fastboot MMC devices are configured based number
> > of mmc slots defined on particular board in sunxi platform.
> >
> > If number of slots are not more than 1, it assigns 0 which usually mmc
> > device on SD slot. With DM_MMC it is detected as 0 since mmc0 node always
> > be an mmc device.
> >
> > If number of slots are more than 1, it assigns 1 which assumes 0 is mmc
> > device and 1 is emmc device. But with DM_MMC there is chance of detecting
> > emmc as device 2 since mmc1 is SDIO as per devicetree definition.
> >
> > So override mmc2 to mmc1 in sunxi dtsi, this will eventually detect mmc2
> > as mmc 1 device even if the board dts has mmc0, mmc1, mmc2.
>
> It doesn't work on Pinebook - where we have mmc0 (SD card), mmc1
> (SDIO), mmc2 (eMMC). It still enumerates mmc2 as mmc2.

Try doing a clean build (i.e., do make distclean beforehand)?

It worked for me once I did that.

ChenYu

> > Some platforms like A20 has mmc0...mmc3, but there is no usecases now for
> > enabling all mmc controllers in any of A20 board dts files.
> >
> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> > ---
> >  arch/arm/dts/sunxi-u-boot.dtsi | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
> > index 8a9f2a6417..fdd4c80aa4 100644
> > --- a/arch/arm/dts/sunxi-u-boot.dtsi
> > +++ b/arch/arm/dts/sunxi-u-boot.dtsi
> > @@ -1,6 +1,10 @@
> >  #include <config.h>
> >
> >  / {
> > +       aliases {
> > +               mmc1 = &mmc2;
> > +       };
> > +
> >         binman {
> >                 filename = "u-boot-sunxi-with-spl.bin";
> >                 pad-byte = <0xff>;
> > --
> > 2.18.0.321.gffc6fa0e3
> >