[U-Boot] [PATCH 3/5] MSCC: add device tree for Serval pcb105 board

Horatiu Vultur horatiu.vultur at microchip.com
Wed Jan 23 15:39:43 UTC 2019


Add device tree based on evaluation board pcb105.

Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
 arch/mips/dts/mscc,serval.dtsi  | 149 ++++++++++++++++++++++++++++++++++++++++
 arch/mips/dts/serval_pcb105.dts |  56 +++++++++++++++
 2 files changed, 205 insertions(+)
 create mode 100644 arch/mips/dts/mscc,serval.dtsi
 create mode 100644 arch/mips/dts/serval_pcb105.dts

diff --git a/arch/mips/dts/mscc,serval.dtsi b/arch/mips/dts/mscc,serval.dtsi
new file mode 100644
index 0000000..bd60051
--- /dev/null
+++ b/arch/mips/dts/mscc,serval.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,serval";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller at 0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416666666>;
+	};
+
+	sys_clk: sys-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <208333333>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <208333333>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x70000000 0x2000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon at 0 {
+			compatible = "mscc,serval-cpu-syscon", "syscon";
+			reg = <0x0 0x2c>;
+		};
+
+		intc: interrupt-controller at 70 {
+			compatible = "mscc,serval-icpu-intr";
+			reg = <0x70 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial at 100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial at 100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		reset at 1070008 {
+			compatible = "mscc,serval-chip-reset";
+			reg = <0x1070008 0x4>;
+		};
+
+		gpio: pinctrl at 1070034 {
+			compatible = "mscc,serval-pinctrl";
+			reg = <0x1070034 0x68>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+
+			sgpio_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
+				function = "sio";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_13", "GPIO_14";
+				function = "uart2";
+			};
+		};
+
+		spi0: spi-bitbang {
+			compatible = "mscc,luton-bb-spi";
+			status = "okay";
+			reg = <0x50 0x4>;
+			num-chipselects = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sgpio: gpio at 10700b4 {
+			compatible = "mscc,luton-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio_pins>;
+			pinctrl-names = "default";
+			reg = <0x10700b4 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&sgpio 0 0 64>;
+		};
+	};
+};
diff --git a/arch/mips/dts/serval_pcb105.dts b/arch/mips/dts/serval_pcb105.dts
new file mode 100644
index 0000000..d0d6fac
--- /dev/null
+++ b/arch/mips/dts/serval_pcb105.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "mscc,serval.dtsi"
+
+/ {
+	model = "Serval PCB105 Reference Board";
+	compatible = "mscc,serval-pcb105", "mscc,serval";
+
+	aliases {
+		spi0 = &spi0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "pcb105:green:status";
+			gpios = <&sgpio 43 1>; /* p11.1 */
+			default-state = "on";
+		};
+
+		status_red {
+			label = "pcb105:red:status";
+			gpios = <&sgpio 11 1>; /* p11.0 */
+			default-state = "off";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	spi-flash at 0 {
+		compatible = "spi-flash";
+		spi-max-frequency = <18000000>; /* input clock */
+		reg = <0>; /* CS0 */
+		spi-cs-high;
+	};
+};
+
+&sgpio {
+	status = "okay";
+	sgpio-ports = <0x00FFFFFF>;
+};
-- 
2.7.4



More information about the U-Boot mailing list