[U-Boot] [PATCH v1 1/4] usb: ether: call _usb_eth_halt() if initialization fails

[Jean-Jacques Hiblot]

If the host does not respond in time, the initialization fails. However
the usb ether driver will still be registered. This will make
usb_gadget_probe_driver() fail the next time the initialization is
attempted because it cannot find an available UDC.

Fixing this by calling _usb_eth_halt() when the init fails.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

 drivers/usb/gadget/ether.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 3b3d9af681..57edaa3ac8 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2333,6 +2333,8 @@ fail:
 }
 
 /*-------------------------------------------------------------------------*/
+static void _usb_eth_halt(struct ether_priv *priv);
+
 static int _usb_eth_init(struct ether_priv *priv)
 {
 	struct eth_dev *dev = &priv->ethdev;
@@ -2406,6 +2408,7 @@ static int _usb_eth_init(struct ether_priv *priv)
 	rx_submit(dev, dev->rx_req, 0);
 	return 0;
 fail:
+	_usb_eth_halt(priv);
 	return -1;
 }
 
@@ -2485,7 +2488,7 @@ static int _usb_eth_recv(struct ether_priv *priv)
 	return 0;
 }
 
-void _usb_eth_halt(struct ether_priv *priv)
+static void _usb_eth_halt(struct ether_priv *priv)
 {
 	struct eth_dev *dev = &priv->ethdev;
 
-- 
2.17.1