[U-Boot] [PATCH v2 03/11] configs: colibri_imx7: enable DM for raw NAND devices

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Use DM and device trees for raw NAND devices by default. This
fixes -74 NAND read errors since it makes sure the ECC settings
are the same as used in Linux and our downstream U-Boot.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v2: None

 configs/colibri_imx7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 7441102ed4..3aaf1a417d 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_NAND_TORTURE=y
 CONFIG_CMD_USB=y
@@ -50,7 +51,9 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_NAND=y
+CONFIG_NAND_MXS_DT=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
-- 
2.20.1