[U-Boot] [RFC PATCH 3/8] clk: actions: Add common clock driver
Amit Singh Tomar
amittomer25 at gmail.com
Thu Jan 3 13:26:18 UTC 2019
CMU block on most of the actions SoC seems to be identical(S900,
S700 and S500)?
This patch converts S900 clock driver to something common that can
be used for other SoCs, for instance S700(most of clk registres are same).
Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
---
arch/arm/include/asm/arch-owl/clk_owl.h | 61 +++++++++++++
arch/arm/include/asm/arch-owl/clk_s900.h | 57 -------------
arch/arm/include/asm/arch-owl/regs_s700.h | 56 ++++++++++++
drivers/clk/owl/Kconfig | 8 +-
drivers/clk/owl/Makefile | 2 +-
drivers/clk/owl/clk_owl.c | 132 ++++++++++++++++++++++++++++
drivers/clk/owl/clk_s900.c | 137 ------------------------------
7 files changed, 252 insertions(+), 201 deletions(-)
create mode 100644 arch/arm/include/asm/arch-owl/clk_owl.h
delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
create mode 100644 drivers/clk/owl/clk_owl.c
delete mode 100644 drivers/clk/owl/clk_s900.c
diff --git a/arch/arm/include/asm/arch-owl/clk_owl.h b/arch/arm/include/asm/arch-owl/clk_owl.h
new file mode 100644
index 0000000..8ff7537
--- /dev/null
+++ b/arch/arm/include/asm/arch-owl/clk_owl.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S900 Clock Definitions
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
+ *
+ */
+
+#ifndef _OWL_CLK_H_
+#define _OWL_CLK_H_
+
+#include <clk-uclass.h>
+
+struct owl_clk_priv {
+ phys_addr_t base;
+};
+
+/* BUSCLK register definitions */
+#define CMU_PDBGDIV_8 7
+#define CMU_PDBGDIV_SHIFT 26
+#define CMU_PDBGDIV_DIV (CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
+#define CMU_PERDIV_8 7
+#define CMU_PERDIV_SHIFT 20
+#define CMU_PERDIV_DIV (CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
+#define CMU_NOCDIV_2 1
+#define CMU_NOCDIV_SHIFT 19
+#define CMU_NOCDIV_DIV (CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
+#define CMU_DMMCLK_SRC_APLL 2
+#define CMU_DMMCLK_SRC_SHIFT 10
+#define CMU_DMMCLK_SRC (CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
+#define CMU_APBCLK_DIV BIT(8)
+#define CMU_NOCCLK_SRC BIT(7)
+#define CMU_AHBCLK_DIV BIT(4)
+#define CMU_CORECLK_MASK 3
+#define CMU_CORECLK_CPLL BIT(1)
+#define CMU_CORECLK_HOSC BIT(0)
+
+/* COREPLL register definitions */
+#define CMU_COREPLL_EN BIT(9)
+#define CMU_COREPLL_HOSC_EN BIT(8)
+#define CMU_COREPLL_OUT (1104 / 24)
+
+/* DEVPLL register definitions */
+#define CMU_DEVPLL_CLK BIT(12)
+#define CMU_DEVPLL_EN BIT(8)
+#define CMU_DEVPLL_OUT (660 / 6)
+
+/* UARTCLK register definitions */
+#define CMU_UARTCLK_SRC_DEVPLL BIT(16)
+
+/* DEVCLKEN1 register definitions */
+#if defined(CONFIG_MACH_S900)
+#define CMU_DEVCLKEN1_UART5 BIT(21)
+#elif defined(CONFIG_MACH_S700)
+#define CMU_DEVCLKEN1_UART3 BIT(11)
+#endif
+
+#define PLL_STABILITY_WAIT_US 50
+
+#endif
diff --git a/arch/arm/include/asm/arch-owl/clk_s900.h b/arch/arm/include/asm/arch-owl/clk_s900.h
deleted file mode 100644
index 88e88f7..0000000
--- a/arch/arm/include/asm/arch-owl/clk_s900.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Actions Semi S900 Clock Definitions
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
- *
- */
-
-#ifndef _OWL_CLK_S900_H_
-#define _OWL_CLK_S900_H_
-
-#include <clk-uclass.h>
-
-struct owl_clk_priv {
- phys_addr_t base;
-};
-
-/* BUSCLK register definitions */
-#define CMU_PDBGDIV_8 7
-#define CMU_PDBGDIV_SHIFT 26
-#define CMU_PDBGDIV_DIV (CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
-#define CMU_PERDIV_8 7
-#define CMU_PERDIV_SHIFT 20
-#define CMU_PERDIV_DIV (CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
-#define CMU_NOCDIV_2 1
-#define CMU_NOCDIV_SHIFT 19
-#define CMU_NOCDIV_DIV (CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
-#define CMU_DMMCLK_SRC_APLL 2
-#define CMU_DMMCLK_SRC_SHIFT 10
-#define CMU_DMMCLK_SRC (CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
-#define CMU_APBCLK_DIV BIT(8)
-#define CMU_NOCCLK_SRC BIT(7)
-#define CMU_AHBCLK_DIV BIT(4)
-#define CMU_CORECLK_MASK 3
-#define CMU_CORECLK_CPLL BIT(1)
-#define CMU_CORECLK_HOSC BIT(0)
-
-/* COREPLL register definitions */
-#define CMU_COREPLL_EN BIT(9)
-#define CMU_COREPLL_HOSC_EN BIT(8)
-#define CMU_COREPLL_OUT (1104 / 24)
-
-/* DEVPLL register definitions */
-#define CMU_DEVPLL_CLK BIT(12)
-#define CMU_DEVPLL_EN BIT(8)
-#define CMU_DEVPLL_OUT (660 / 6)
-
-/* UARTCLK register definitions */
-#define CMU_UARTCLK_SRC_DEVPLL BIT(16)
-
-/* DEVCLKEN1 register definitions */
-#define CMU_DEVCLKEN1_UART5 BIT(21)
-
-#define PLL_STABILITY_WAIT_US 50
-
-#endif
diff --git a/arch/arm/include/asm/arch-owl/regs_s700.h b/arch/arm/include/asm/arch-owl/regs_s700.h
new file mode 100644
index 0000000..a0bd737
--- /dev/null
+++ b/arch/arm/include/asm/arch-owl/regs_s700.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S700 Register Definitions
+ *
+ */
+
+#ifndef _OWL_REGS_S700_H_
+#define _OWL_REGS_S700_H_
+
+#define CMU_COREPLL (0x0000)
+#define CMU_DEVPLL (0x0004)
+#define CMU_DDRPLL (0x0008)
+#define CMU_NANDPLL (0x000C)
+#define CMU_DISPLAYPLL (0x0010)
+#define CMU_AUDIOPLL (0x0014)
+#define CMU_TVOUTPLL (0x0018)
+#define CMU_BUSCLK (0x001C)
+#define CMU_SENSORCLK (0x0020)
+#define CMU_LCDCLK (0x0024)
+#define CMU_DSIPLLCLK (0x0028)
+#define CMU_CSICLK (0x002C)
+#define CMU_DECLK (0x0030)
+#define CMU_SICLK (0x0034)
+#define CMU_BUSCLK1 (0x0038)
+#define CMU_HDECLK (0x003C)
+#define CMU_VDECLK (0x0040)
+#define CMU_VCECLK (0x0044)
+#define CMU_NANDCCLK (0x004C)
+#define CMU_SD0CLK (0x0050)
+#define CMU_SD1CLK (0x0054)
+#define CMU_SD2CLK (0x0058)
+#define CMU_UART0CLK (0x005C)
+#define CMU_UART1CLK (0x0060)
+#define CMU_UART2CLK (0x0064)
+#define CMU_UART3CLK (0x0068)
+#define CMU_UART4CLK (0x006C)
+#define CMU_UART5CLK (0x0070)
+#define CMU_UART6CLK (0x0074)
+#define CMU_PWM0CLK (0x0078)
+#define CMU_PWM1CLK (0x007C)
+#define CMU_PWM2CLK (0x0080)
+#define CMU_PWM3CLK (0x0084)
+#define CMU_PWM4CLK (0x0088)
+#define CMU_PWM5CLK (0x008C)
+#define CMU_GPU3DCLK (0x0090)
+#define CMU_CORECTL (0x009C)
+#define CMU_DEVCLKEN0 (0x00A0)
+#define CMU_DEVCLKEN1 (0x00A4)
+#define CMU_DEVRST0 (0x00A8)
+#define CMU_DEVRST1 (0x00AC)
+#define CMU_USBPLL (0x00B0)
+#define CMU_ETHERNETPLL (0x00B4)
+#define CMU_CVBSPLL (0x00B8)
+#define CMU_SSTSCLK (0x00C0)
+
+#endif
diff --git a/drivers/clk/owl/Kconfig b/drivers/clk/owl/Kconfig
index 661f198..3adbda0 100644
--- a/drivers/clk/owl/Kconfig
+++ b/drivers/clk/owl/Kconfig
@@ -1,12 +1,8 @@
config CLK_OWL
bool "Actions Semi OWL clock drivers"
- depends on CLK && ARCH_OWL
+ depends on CLK && ARCH_OWL && ARM64
help
Enable support for clock managemet unit present in Actions Semi
OWL SoCs.
-config CLK_S900
- bool "Actions Semi S900 clock driver"
- depends on CLK_OWL && ARM64
- help
- Enable support for the clocks in Actions Semi S900 SoC.
+
diff --git a/drivers/clk/owl/Makefile b/drivers/clk/owl/Makefile
index 63ab573..5218b6b 100644
--- a/drivers/clk/owl/Makefile
+++ b/drivers/clk/owl/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_CLK_S900) += clk_s900.o
+obj-$(CONFIG_CLK_OWL) += clk_owl.o
diff --git a/drivers/clk/owl/clk_owl.c b/drivers/clk/owl/clk_owl.c
new file mode 100644
index 0000000..9d5befc
--- /dev/null
+++ b/drivers/clk/owl/clk_owl.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Actions Semi S900 clock driver
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch-owl/clk_owl.h>
+#include <asm/io.h>
+#if defined(CONFIG_MACH_S900)
+#include <asm/arch-owl/regs_s900.h>
+#elif defined(CONFIG_MACH_S700)
+#include <asm/arch-owl/regs_s700.h>
+#endif
+
+void owl_clk_init(struct owl_clk_priv *priv)
+{
+ u32 bus_clk = 0, core_pll, dev_pll;
+
+#if defined(CONFIG_MACH_S900)
+ /* Enable ASSIST_PLL */
+ setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
+
+ udelay(PLL_STABILITY_WAIT_US);
+#endif
+
+ /* Source HOSC to DEV_CLK */
+ clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+ /* Configure BUS_CLK */
+ bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
+ CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
+ CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
+ writel(bus_clk, priv->base + CMU_BUSCLK);
+
+ udelay(PLL_STABILITY_WAIT_US);
+
+ /* Configure CORE_PLL */
+ core_pll = readl(priv->base + CMU_COREPLL);
+ core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
+ writel(core_pll, priv->base + CMU_COREPLL);
+
+ udelay(PLL_STABILITY_WAIT_US);
+
+ /* Configure DEV_PLL */
+ dev_pll = readl(priv->base + CMU_DEVPLL);
+ dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
+ writel(dev_pll, priv->base + CMU_DEVPLL);
+
+ udelay(PLL_STABILITY_WAIT_US);
+
+ /* Source CORE_PLL for CORE_CLK */
+ clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
+ CMU_CORECLK_CPLL);
+
+ /* Source DEV_PLL for DEV_CLK */
+ setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+ udelay(PLL_STABILITY_WAIT_US);
+}
+
+int owl_clk_enable(struct clk *clk)
+{
+ struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+
+#if defined(CONFIG_MACH_S900)
+ /* Source HOSC for UART5 interface */
+ clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
+
+ /* Enable UART5 interface clock */
+ setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+#elif defined(CONFIG_MACH_S700)
+ /* Source HOSC for UART3 interface */
+ clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
+
+ /* Enable UART3 interface clock */
+ setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+#endif
+
+ return 0;
+}
+
+int owl_clk_disable(struct clk *clk)
+{
+ struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+#if defined(CONFIG_MACH_S900)
+ /* Disable UART5 interface clock */
+ clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+#elif defined(CONFIG_MACH_S700)
+ /* Disable UART3 interface clock */
+ clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+#endif
+
+ return 0;
+}
+
+static int owl_clk_probe(struct udevice *dev)
+{
+ struct owl_clk_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr(dev);
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* setup necessary clocks */
+ owl_clk_init(priv);
+
+ return 0;
+}
+
+static struct clk_ops owl_clk_ops = {
+ .enable = owl_clk_enable,
+ .disable = owl_clk_disable,
+};
+
+static const struct udevice_id owl_clk_ids[] = {
+ { .compatible = "actions,s900-cmu" },
+ { .compatible = "actions,s700-cmu" },
+ { }
+};
+
+U_BOOT_DRIVER(clk_owl) = {
+ .name = "clk_s900",
+ .id = UCLASS_CLK,
+ .of_match = owl_clk_ids,
+ .ops = &owl_clk_ops,
+ .priv_auto_alloc_size = sizeof(struct owl_clk_priv),
+ .probe = owl_clk_probe,
+};
diff --git a/drivers/clk/owl/clk_s900.c b/drivers/clk/owl/clk_s900.c
deleted file mode 100644
index a7c15d2..0000000
--- a/drivers/clk/owl/clk_s900.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 clock driver
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/arch-owl/clk_s900.h>
-#include <asm/arch-owl/regs_s900.h>
-#include <asm/io.h>
-
-#include <dt-bindings/clock/s900_cmu.h>
-
-void owl_clk_init(struct owl_clk_priv *priv)
-{
- u32 bus_clk = 0, core_pll, dev_pll;
-
- /* Enable ASSIST_PLL */
- setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
-
- udelay(PLL_STABILITY_WAIT_US);
-
- /* Source HOSC to DEV_CLK */
- clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
- /* Configure BUS_CLK */
- bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
- CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
- CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
- writel(bus_clk, priv->base + CMU_BUSCLK);
-
- udelay(PLL_STABILITY_WAIT_US);
-
- /* Configure CORE_PLL */
- core_pll = readl(priv->base + CMU_COREPLL);
- core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
- writel(core_pll, priv->base + CMU_COREPLL);
-
- udelay(PLL_STABILITY_WAIT_US);
-
- /* Configure DEV_PLL */
- dev_pll = readl(priv->base + CMU_DEVPLL);
- dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
- writel(dev_pll, priv->base + CMU_DEVPLL);
-
- udelay(PLL_STABILITY_WAIT_US);
-
- /* Source CORE_PLL for CORE_CLK */
- clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
- CMU_CORECLK_CPLL);
-
- /* Source DEV_PLL for DEV_CLK */
- setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
- udelay(PLL_STABILITY_WAIT_US);
-}
-
-void owl_uart_clk_enable(struct owl_clk_priv *priv)
-{
- /* Source HOSC for UART5 interface */
- clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
-
- /* Enable UART5 interface clock */
- setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-void owl_uart_clk_disable(struct owl_clk_priv *priv)
-{
- /* Disable UART5 interface clock */
- clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-int owl_clk_enable(struct clk *clk)
-{
- struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
- switch (clk->id) {
- case CLOCK_UART5:
- owl_uart_clk_enable(priv);
- break;
- default:
- return 0;
- }
-
- return 0;
-}
-
-int owl_clk_disable(struct clk *clk)
-{
- struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
- switch (clk->id) {
- case CLOCK_UART5:
- owl_uart_clk_disable(priv);
- break;
- default:
- return 0;
- }
-
- return 0;
-}
-
-static int owl_clk_probe(struct udevice *dev)
-{
- struct owl_clk_priv *priv = dev_get_priv(dev);
-
- priv->base = dev_read_addr(dev);
- if (priv->base == FDT_ADDR_T_NONE)
- return -EINVAL;
-
- /* setup necessary clocks */
- owl_clk_init(priv);
-
- return 0;
-}
-
-static struct clk_ops owl_clk_ops = {
- .enable = owl_clk_enable,
- .disable = owl_clk_disable,
-};
-
-static const struct udevice_id owl_clk_ids[] = {
- { .compatible = "actions,s900-cmu" },
- { }
-};
-
-U_BOOT_DRIVER(clk_owl) = {
- .name = "clk_s900",
- .id = UCLASS_CLK,
- .of_match = owl_clk_ids,
- .ops = &owl_clk_ops,
- .priv_auto_alloc_size = sizeof(struct owl_clk_priv),
- .probe = owl_clk_probe,
-};
--
2.7.4
More information about the U-Boot
mailing list