[U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion

[Derald Woods]

On Sat, Jan 19, 2019, 5:29 PM Tom Rini <trini at konsulko.com wrote:

> On Sat, Jan 19, 2019 at 02:02:29PM -0600, Derald D. Woods wrote:
>
> > This series converts to SPL_GENERATE_ATMEL_PMECC_HEADER Kconfig. The
> > focus is Kconfig conversion and clean build for the affected boards.
> >
> > Derald D. Woods (2):
> >   nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC
> >   ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
>
> This series causes a ton of problems now on:
> pm9g45 at91sam9261ek_dataflash_cs3 at91sam9261ek_dataflash_cs0
> at91sam9xeek_dataflash_cs1 at91sam9260ek_dataflash_cs0
> at91sam9260ek_dataflash_cs1 at91sam9260ek_nandflash
> at91sam9263ek_dataflash_cs0 ethernut5 sama5d2_ptc_ek_mmc
> at91sam9g20ek_dataflash_cs1 at91sam9g20ek_dataflash_cs0
> sama5d2_ptc_ek_nandflash at91sam9xeek_nandflash
> at91sam9m10g45ek_nandflash snapper9g20 at91sam9rlek_mmc
> at91sam9xeek_dataflash_cs0 at91sam9g10ek_nandflash
> at91sam9g10ek_dataflash_cs3 at91sam9g10ek_dataflash_cs0
> at91sam9g20ek_2mmc_nandflash at91sam9263ek_norflash_boot
> at91sam9g20ek_nandflash snapper9260 at91sam9g20ek_2mmc
> at91sam9263ek_norflash at91sam9261ek_nandflash meesc pm9261 pm9263
> at91sam9m10g45ek_mmc gurnard usb_a9263_dataflash at91sam9rlek_nandflash
> at91sam9263ek_dataflash at91sam9263ek_nandflash at91sam9rlek_dataflash
>


OK.  So this is likely due to patch 0001 only. I will drop it. And try a
few of these configs.

Derald



> --
> Tom
>