[U-Boot] [PATCH u-boot 2/2] cmd: mdio: Add new parameter to access MMD PHY registers

[Carlo Caione]

Two new parameters (rmmd and wmmd) are added to allow the `mdio` command
to access the content of the MMD PHY registers.

Signed-off-by: Carlo Caione <ccaione at baylibre.com>
---
 cmd/mdio.c | 33 +++++++++++++++++++++++++++------
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/cmd/mdio.c b/cmd/mdio.c
index 184868063a..010632b562 100644
--- a/cmd/mdio.c
+++ b/cmd/mdio.c
@@ -43,7 +43,7 @@ static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus,
 			     int addrlo,
 			     int addrhi, int devadlo, int devadhi,
 			     int reglo, int reghi, unsigned short data,
-			     int extended)
+			     int extended, int mmd)
 {
 	int addr, devad, reg;
 	int err = 0;
@@ -51,7 +51,9 @@ static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus,
 	for (addr = addrlo; addr <= addrhi; addr++) {
 		for (devad = devadlo; devad <= devadhi; devad++) {
 			for (reg = reglo; reg <= reghi; reg++) {
-				if (!extended)
+				if (mmd)
+					err = phy_write_mmd(phydev, devad, reg, data);
+				else if (!extended)
 					err = bus->write(bus, addr, devad,
 							 reg, data);
 				else
@@ -71,7 +73,7 @@ err_out:
 static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus,
 			    int addrlo,
 			    int addrhi, int devadlo, int devadhi,
-			    int reglo, int reghi, int extended)
+			    int reglo, int reghi, int extended, int mmd)
 {
 	int addr, devad, reg;
 
@@ -83,7 +85,9 @@ static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus,
 			for (reg = reglo; reg <= reghi; reg++) {
 				int val;
 
-				if (!extended)
+				if (mmd)
+					val = phy_read_mmd(phydev, devad, reg);
+				else if (!extended)
 					val = bus->read(bus, addr, devad, reg);
 				else
 					val = phydev->drv->readext(phydev, addr,
@@ -189,6 +193,7 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	struct mii_dev *bus;
 	struct phy_device *phydev = NULL;
 	int extended = 0;
+	int mmd = 0;
 
 	if (argc < 2)
 		return CMD_RET_USAGE;
@@ -232,6 +237,18 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				return -1;
 			}
 		}
+		if (op[1] == 'm') {
+			phydev = mdio_phydev_for_ethname(argv[2]);
+
+			if (phydev) {
+				addrlo = phydev->addr;
+				addrhi = addrlo;
+				bus = phydev->bus;
+				mmd = 1;
+			} else {
+				return -1;
+			}
+		}
 	}
 
 	switch (op[0]) {
@@ -265,12 +282,12 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	switch (op[0]) {
 	case 'w':
 		mdio_write_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
-				  reglo, reghi, data, extended);
+				  reglo, reghi, data, extended, mmd);
 		break;
 
 	case 'r':
 		mdio_read_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
-				 reglo, reghi, extended);
+				 reglo, reghi, extended, mmd);
 		break;
 	}
 
@@ -303,6 +320,10 @@ U_BOOT_CMD(
 		"read PHY's extended register at <devad>.<reg>\n"
 	"mdio wx <phydev> [<devad>.]<reg> <data> - "
 		"write PHY's extended register at <devad>.<reg>\n"
+	"mdio rmmd <phydev> [<devad>.]<reg> - "
+		"read PHY's extended register at <devad>.<reg>\n"
+	"mdio wmmd <phydev> [<devad>.]<reg> <data> - "
+		"write PHY's extended register at <devad>.<reg>\n"
 	"<phydev> may be:\n"
 	"   <busname>  <addr>\n"
 	"   <addr>\n"
-- 
2.19.1