[U-Boot] [PATCH v4 1/3] net: phy: Add support for accessing MMD PHY registers

[Carlo Caione]

Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
to allow access to the MMD PHY registers.

The MMD PHY registers can be accessed by two means:

1. Using two new MMD access function hooks in the PHY driver. These
functions can be implemented when the PHY driver does not support the
standard IEEE Compatible clause 45 access mechanism described in clause
22 or if the PHY uses its own non-standard access mechanism.

2. The standard clause 45 access extensions to the MMD registers through
the indirection registers (clause 22) in all the other cases.

Signed-off-by: Carlo Caione <ccaione at baylibre.com>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>
---
 drivers/net/phy/phy.c |  4 ++++
 include/phy.h         | 52 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index cda4caa803..6769047407 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -549,6 +549,10 @@ int phy_register(struct phy_driver *drv)
 		drv->readext += gd->reloc_off;
 	if (drv->writeext)
 		drv->writeext += gd->reloc_off;
+	if (drv->read_mmd)
+		drv->read_mmd += gd->reloc_off;
+	if (drv->write_mmd)
+		drv->write_mmd += gd->reloc_off;
 #endif
 	return 0;
 }
diff --git a/include/phy.h b/include/phy.h
index b86fdfb2ce..440013d000 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -101,6 +101,14 @@ struct phy_driver {
 	int (*readext)(struct phy_device *phydev, int addr, int devad, int reg);
 	int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg,
 			u16 val);
+
+	/* Phy specific driver override for reading a MMD register */
+	int (*read_mmd)(struct phy_device *phydev, int devad, int reg);
+
+	/* Phy specific driver override for writing a MMD register */
+	int (*write_mmd)(struct phy_device *phydev, int devad, int reg,
+			 u16 val);
+
 	struct list_head list;
 };
 
@@ -164,6 +172,50 @@ static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
 	return bus->write(bus, phydev->addr, devad, regnum, val);
 }
 
+static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad,
+					  int regnum)
+{
+	/* Write the desired MMD Devad */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
+
+	/* Select the Function : DATA with no post increment */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
+		  (devad | MII_MMD_CTRL_NOINCR));
+}
+
+static inline int phy_read_mmd(struct phy_device *phydev, int devad,
+			       int regnum)
+{
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	if (phydev->drv->read_mmd)
+		return phydev->drv->read_mmd(phydev, devad, regnum);
+
+	phy_mmd_start_indirect(phydev, devad, regnum);
+
+	/* Read the content of the MMD's selected register */
+	return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
+}
+
+static inline int phy_write_mmd(struct phy_device *phydev, int devad,
+				int regnum, u16 val)
+{
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	if (phydev->drv->write_mmd)
+		return phydev->drv->write_mmd(phydev, devad, regnum, val);
+
+	phy_mmd_start_indirect(phydev, devad, regnum);
+
+	/* Write the data into MMD's selected register */
+	return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
+}
+
 #ifdef CONFIG_PHYLIB_10G
 extern struct phy_driver gen10g_driver;
 
-- 
2.19.1