[U-Boot] [PATCH v2 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
David Wu
david.wu at rock-chips.com
Mon Jan 14 12:01:17 UTC 2019
Hi Heiko,
在 2019/1/6 上午1:17, Heiko Stuebner 写道:
>> diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c
>> index 3c6c3d3c09..a5e4d39cb7 100644
>> --- a/arch/arm/mach-rockchip/rk3188-board-spl.c
>> +++ b/arch/arm/mach-rockchip/rk3188-board-spl.c
>> @@ -120,7 +120,7 @@ void board_debug_uart_init(void)
>>
>> void board_init_f(ulong dummy)
>> {
>> - struct udevice *pinctrl, *dev;
>> + struct udevice *dev;
>> int ret;
>>
>> #define EARLY_UART
>> @@ -134,10 +134,7 @@ void board_init_f(ulong dummy)
>> * printascii("string");
>> */
>> debug_uart_init();
>> - printch('s');
>> - printch('p');
>> - printch('l');
>> - printch('\n');
>> + printascii("U-Boot SPL board init");
> Did you test this change?
> I remember rk3188 having issues (aka hanging) when trying to print
> strings through the debug uart and only printch working at all.
> (Timer issue or so?) ... Not sure if this got fixed in the meantime?
>
I don't know there was a issue, but i test it on the Radxa board today,
it looks okay.
U-Boot SPL board init
U-Boot SPL 2019.01-rc1-00009-gdd7b9156fe (Jan 14 2019 - 19:53:50 +0800)
Returning to boot ROM...
U-Boot 2019.01-rc1-00009-gdd7b9156fe (Jan 14 2019 - 19:53:50 +0800)
Model: Radxa Rock
DRAM: 2 GiB
MMC: dwmmc at 10214000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
In: serial at 20064000
Out: serial at 20064000
Err: serial at 20064000
Model: Radxa Rock
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
=>
More information about the U-Boot
mailing list