[U-Boot] Problems to boot i.MX8QXP EVK board

[Breno Matheus Lima]

Hi Peng,

Em qua, 16 de jan de 2019 às 23:33, Peng Fan <peng.fan at nxp.com> escreveu:
>
> Hi Breno,
>
> > -----Original Message-----
> > From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> > Sent: 2019年1月17日 9:04
> > To: Peng Fan <peng.fan at nxp.com>; Breno Matheus Lima
> > <breno.lima at nxp.com>
> > Cc: Fabio Estevam <festevam at gmail.com>; Fabio Estevam
> > <fabio.estevam at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>
> > Subject: Problems to boot i.MX8QXP EVK board
> >
> > Hi Peng,
> >
> > I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK board
> > by following README file (board/freescale/imx8qxp_mek/README).
> >
> > After reverting commit f7e475db4011("tools: imx8image: set dcd_skip to
> > true") everything seems to be working fine.
>
> Are you using A0 or B0 chip? A0 chip is no being supported anymore.
>

I'm using i.MX8QXP B0:

U-Boot 2019.01-00001-gc94b5e99a6 (Jan 16 2019 - 22:52:33 -0200)

CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

Model: Freescale i.MX8QXP MEK
Board: iMX8QXP MEK
Build: SCFW 3301c1a9
Boot:  SD1
DRAM:  3 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial at 5a060000
Out:   serial at 5a060000
Err:   serial at 5a060000
Net:   eth-1: ethernet at 5b040000
Hit any key to stop autoboot:  0
=>

Thanks,
Breno Lima