[U-Boot] Problems to boot i.MX8QXP EVK board

[Peng Fan]

> -----Original Message-----
> From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> Sent: 2019年1月17日 9:42
> To: Peng Fan <peng.fan at nxp.com>
> Cc: Breno Matheus Lima <breno.lima at nxp.com>; Fabio Estevam
> <festevam at gmail.com>; Fabio Estevam <fabio.estevam at nxp.com>;
> U-Boot-Denx <u-boot at lists.denx.de>
> Subject: Re: Problems to boot i.MX8QXP EVK board
> 
> Hi Peng,
> 
> Em qua, 16 de jan de 2019 às 23:33, Peng Fan <peng.fan at nxp.com>
> escreveu:
> >
> > Hi Breno,
> >
> > > -----Original Message-----
> > > From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> > > Sent: 2019年1月17日 9:04
> > > To: Peng Fan <peng.fan at nxp.com>; Breno Matheus Lima
> > > <breno.lima at nxp.com>
> > > Cc: Fabio Estevam <festevam at gmail.com>; Fabio Estevam
> > > <fabio.estevam at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>
> > > Subject: Problems to boot i.MX8QXP EVK board
> > >
> > > Hi Peng,
> > >
> > > I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK
> > > board by following README file
> (board/freescale/imx8qxp_mek/README).
> > >
> > > After reverting commit f7e475db4011("tools: imx8image: set dcd_skip
> > > to
> > > true") everything seems to be working fine.
> >
> > Are you using A0 or B0 chip? A0 chip is no being supported anymore.
> >
> 
> I'm using i.MX8QXP B0:

Could you give a try using 4.14.78 GA release scfw/seco/atf + upstream uboot?

There might be some change in scfw.

Thanks,
Peng.

> 
> U-Boot 2019.01-00001-gc94b5e99a6 (Jan 16 2019 - 22:52:33 -0200)
> 
> CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz
> 
> Model: Freescale i.MX8QXP MEK
> Board: iMX8QXP MEK
> Build: SCFW 3301c1a9
> Boot:  SD1
> DRAM:  3 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default
> environment
> 
> In:    serial at 5a060000
> Out:   serial at 5a060000
> Err:   serial at 5a060000
> Net:   eth-1: ethernet at 5b040000
> Hit any key to stop autoboot:  0
> =>
> 
> Thanks,
> Breno Lima