[U-Boot] Problems to boot i.MX8QXP EVK board

[Breno Matheus Lima]

Hi Peng,
Em qua, 16 de jan de 2019 às 23:48, Peng Fan <peng.fan at nxp.com> escreveu:
>
>
>
> > -----Original Message-----
> > From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> > Sent: 2019年1月17日 9:42
> > To: Peng Fan <peng.fan at nxp.com>
> > Cc: Breno Matheus Lima <breno.lima at nxp.com>; Fabio Estevam
> > <festevam at gmail.com>; Fabio Estevam <fabio.estevam at nxp.com>;
> > U-Boot-Denx <u-boot at lists.denx.de>
> > Subject: Re: Problems to boot i.MX8QXP EVK board
> >
> > Hi Peng,
> >
> > Em qua, 16 de jan de 2019 às 23:33, Peng Fan <peng.fan at nxp.com>
> > escreveu:
> > >
> > > Hi Breno,
> > >
> > > > -----Original Message-----
> > > > From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> > > > Sent: 2019年1月17日 9:04
> > > > To: Peng Fan <peng.fan at nxp.com>; Breno Matheus Lima
> > > > <breno.lima at nxp.com>
> > > > Cc: Fabio Estevam <festevam at gmail.com>; Fabio Estevam
> > > > <fabio.estevam at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>
> > > > Subject: Problems to boot i.MX8QXP EVK board
> > > >
> > > > Hi Peng,
> > > >
> > > > I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK
> > > > board by following README file
> > (board/freescale/imx8qxp_mek/README).
> > > >
> > > > After reverting commit f7e475db4011("tools: imx8image: set dcd_skip
> > > > to
> > > > true") everything seems to be working fine.
> > >
> > > Are you using A0 or B0 chip? A0 chip is no being supported anymore.
> > >
> >
> > I'm using i.MX8QXP B0:
>
> Could you give a try using 4.14.78 GA release scfw/seco/atf + upstream uboot?
>
> There might be some change in scfw.

Hi Peng,

I'm using the following versions:

- U-Boot upstream v2019.01
- ATF from NXP codeaurora (rel_imx_4.14.78_1.0.0_ga)
- SCFW binary from imx-sc-firmware-1.1 package
- SECO FW from firmware-imx-8.0 package

The same issue still happening, I can only boot my board after
reverting commit f7e475db4011("tools: imx8image: set dcd_skip to
true").

As you can see in log below, SCFW top is 65afe5f6:

U-Boot 2019.01-00001-g2df3ad4767 (Jan 17 2019 - 08:15:39 -0200)

CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

Model: Freescale i.MX8QXP MEK
Board: iMX8QXP MEK
Build: SCFW 65afe5f6
Boot:  SD1
DRAM:  3 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial at 5a060000
Out:   serial at 5a060000
Err:   serial at 5a060000
Net:   eth-1: ethernet at 5b040000
Hit any key to stop autoboot:  0
=>

Thanks,
Breno Lima