[U-Boot] Problems to boot i.MX8QXP EVK board

Fabio Estevam festevam at gmail.com
Thu Jan 17 11:30:14 UTC 2019


Hi Peng,

On Thu, Jan 17, 2019 at 8:27 AM Breno Matheus Lima
<brenomatheus at gmail.com> wrote:

> Hi Peng,
>
> I'm using the following versions:
>
> - U-Boot upstream v2019.01
> - ATF from NXP codeaurora (rel_imx_4.14.78_1.0.0_ga)
> - SCFW binary from imx-sc-firmware-1.1 package
> - SECO FW from firmware-imx-8.0 package
>
> The same issue still happening, I can only boot my board after
> reverting commit f7e475db4011("tools: imx8image: set dcd_skip to
> true").
>
> As you can see in log below, SCFW top is 65afe5f6:
>
> U-Boot 2019.01-00001-g2df3ad4767 (Jan 17 2019 - 08:15:39 -0200)
>
> CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

The reported frequency is 147.2 GHz. Do you have a fix for this?

> Model: Freescale i.MX8QXP MEK
> Board: iMX8QXP MEK
> Build: SCFW 65afe5f6
> Boot:  SD1
> DRAM:  3 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default environment

Should we revert f7e475db4011 ("tools: imx8image: set dcd_skip to true")?


More information about the U-Boot mailing list