[U-Boot] Problems to boot i.MX8QXP EVK board

[Peng Fan]

Hi Breno,

> -----Original Message-----
> From: Breno Matheus Lima [mailto:brenomatheus at gmail.com]
> Sent: 2019年1月17日 9:04
> To: Peng Fan <peng.fan at nxp.com>; Breno Matheus Lima
> <breno.lima at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>; Fabio Estevam
> <fabio.estevam at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>
> Subject: Problems to boot i.MX8QXP EVK board
> 
> Hi Peng,
> 
> I'm not being able to boot U-Boot v2019.01 on my i.MX8QXP B0 MEK board
> by following README file (board/freescale/imx8qxp_mek/README).
> 
> After reverting commit f7e475db4011("tools: imx8image: set dcd_skip to
> true") everything seems to be working fine.

Are you using A0 or B0 chip? A0 chip is no being supported anymore.

Regards,
Peng.

> 
> Do you happen to know if the procedure in README file should be enough for
> v2019.01?
> 
> Thanks,
> Breno Lima