[U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support
Abel Vesa
abel.vesa at nxp.com
Tue Jan 29 11:35:17 UTC 2019
Add the DM_GPIO related config for mx6sabreauto.
Also add the gpio request calls.
Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++
configs/mx6sabreauto_defconfig | 1 +
2 files changed, 4 insertions(+)
diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c
index c8f1263..c7e3e67 100644
--- a/board/freescale/mx6sabreauto/mx6sabreauto.c
+++ b/board/freescale/mx6sabreauto/mx6sabreauto.c
@@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
static void setup_iomux_backlight(void)
{
+ gpio_request(IMX_GPIO_NR(2, 9), "backlight");
gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
SETUP_IOMUX_PADS(backlight_pads);
}
@@ -594,6 +595,7 @@ int board_init(void)
else
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
/* I2C 3 Steer */
+ gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
SETUP_IOMUX_PADS(i2c3_pads);
#ifndef CONFIG_SYS_FLASH_CFI
@@ -602,6 +604,7 @@ int board_init(void)
else
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
#endif
+ gpio_request(IMX_GPIO_NR(1, 15), "expander en");
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
SETUP_IOMUX_PADS(port_exp);
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index c64ec66..4a9739c 100644
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -60,6 +60,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_SF=y
+CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_NAND=y
--
2.7.4
More information about the U-Boot
mailing list